Develop Bugs

(req)epic 4g touch metro mms and wed settings

okay so i flashed my epic 4g touch to metro pcs with talk and txt and need some guidance to add web and picture msgs does some on have instructions or a link?

lexo1a said:
okay so i flashed my epic 4g touch to metro pcs with talk and txt and need some guidance to add web and picture msgs does some on have instructions or a link?
Click to expand...
Click to collapse
Bump! Would like to get some guidance on the "MMS (Picture Messages)"
Thanks in advance!

lexo1a said:
okay so i flashed my epic 4g touch to metro pcs with talk and txt and need some guidance to add web and picture msgs does some on have instructions or a link?
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=1303507

Been trying that with no luck! ;(
The EVO 3D was my last device and I did all the settings myself... But, the Epic Touch S2 seems a little trickier but, I think i'm just missing something simple!
All help is appreciated
Sent from my dociousaliexpilisticfragicalirepus SPH-D710 using XDA Premium!

i currently have an epic touch and also can not get mms to work. i believe a modded mms.apk is needed.

livnda209 said:
i currently have an epic touch and also can not get mms to work. i believe a modded mms.apk is needed.
Click to expand...
Click to collapse
Try this
MMS
MAKE SURE YOUR WEB IS WORKING PROPERLY (ABOVE INSTRUCTIONS) AS YOU CAN'T HAVE MMS WITHOUT WORKING INTERNET!!!!!
Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.
1: Install Arcsoft MMS version 5.0.70.24 from Verzion.
2: Open your Messaging and click on the SMS/MMS option.
3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.
4: Add a new server with the following settings:
Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K
5: Click "Done" and then set the new server as default.
6: Using a Registry Editor edit the following values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )
Code:
http://rapidshare.com/files/166154036/HTC_VOGUE_METRO_WEB_MMS_SETTINGS.rar.html
pulled from
http://forum.xda-developers.com/showthread.php?t=448955
---------- Post added at 12:16 PM ---------- Previous post was at 12:10 PM ----------
livnda209 said:
i currently have an epic touch and also can not get mms to work. i believe a modded mms.apk is needed.
Click to expand...
Click to collapse
Try this as well
Use this guide to get MMS for Metro. Replace the mms.apk as directed. Do Not remove the telephony.db file(dont replace or delete). Go to voice Dialer, say open APN. Create MetroPcs apn with these [URL="http://forum.xda-developers.com/show....php?t=1288216"][URL="http://forum.xda-developers.com/showthread.php?t=1288216"]settings[/URL][/URL](. For the record I used CleanGB Rom 1.0 - EI22 Modem.
If you should encounter any difficulty after rom flashes, make sure your prl is current. I ran across a problem earlier that stumped me for a bit, airplane mode would toggle on/off and became frustrated to no end.
MetroPCS APN Settings Guide:
These are settings provided to help users with MMS, and 3G.
It works with Most roms. Tested and Confirmed on Swagged Out Stock.
1.Flash an MMS script compatible with your rom. (Scripts created By Bloodykiller86)
MetroPCS Evo Sense 4.53 Based MMS Script v1.5
MetroPCS Sense 2.1/3.0 Hybrids MMS & Web Script v2
MetroPCS Evo AOSP Script v5
MetroPCS Evo MIUI MMS Script v1
2.Download APN Manager from the Android Market.
3.Create a new APN and enter these settings:
APN: internet
Proxy: wap.metropcs.net:3128
Port: 3128
UserName: Phone#@mymetropcs.com
Password: MSL code*
Server: wap.metropcs.net
MMSC: http://mms.metropcs.net:3128/mmsc
MMS Proxy: wap.metropcs.net
MMS Port: 3128
MCC: 310
MNC: 004
APN Type: MMS
4. Download Any Cut from the Android Market, then create an activity, apns on your homescreen.
Open apns choose MetroPCS and edit then authentication type to pap or chap. If no APN exists create a new one and fill it in with the info above.
-Make sure to enable created APN in APN Manager.
-Also if your MMS still isn't working make sure the metropcs.sh file from the script is in the correct place, if it is execute it. If It's not etract it from the script, and place it in the root of the internal memory, set permissions, and then execute it.
*If you want to figure of your MetroPCS MSL code check out whiterabbit.org
pulled from
http://forum.xda-developers.com/showthread.php?t=1288216

Thanks for the suggestions brianhot1 but the first suggestion is for window's mobile phones. I use to use that method back in the day and it does work but not for android's. Second method has correct apn settings but the modded mms.apk is for htc evo. It would not be compatible with a samsung epic touch as android version and and rom play a factor into making a modded mms.apk. Hopefully i will find a way to get it working soon tho.

Just get ur mms apk. Get apktool decompile nd edit mms.config
livnda209 said:
Thanks for the suggestions brianhot1 but the first suggestion is for window's mobile phones. I use to use that method back in the day and it does work but not for android's. Second method has correct apn settings but the modded mms.apk is for htc evo. It would not be compatible with a samsung epic touch as android version and and rom play a factor into making a modded mms.apk. Hopefully i will find a way to get it working soon tho.
Click to expand...
Click to collapse
Sent from my SPH-D710 using XDA App

thanks for pointing me in the right direction! I got apktool now and i go to decompile the original mms.apk and it gives me an error message at the end that i need to install the specific framework for my phone. I used root explorer to get them onto my laptop. Just stuck on installing them now.

Flashed tablets before, but never a phone to switch carriers. I have my eyes on the same solution being discussed here - Samsung Epic Touch 4G on MetroPCS. Is the solution Brian provided the standard steps needed to flash any android device or does it differ between specific models?
try this
http://forum.xda-developers.com/show....php?t=1303507
Click to expand...
Click to collapse
Thanks!

livnda209 said:
thanks for pointing me in the right direction! I got apktool now and i go to decompile the original mms.apk and it gives me an error message at the end that i need to install the specific framework for my phone. I used root explorer to get them onto my laptop. Just stuck on installing them now.
Click to expand...
Click to collapse
install framework is
Code:
apktool if framework-res.apk

[Wondering]
Hey can't I just make an app for it?
You using Eclipse you can just make a messaging app.
Wouldn't I just be able to add the MetroPCS APN settings to it?

http://metropcsflash.blogspot.com/p/samsun-galaxy-s2-metropcs-full-flash.html

lexo1a said:
okay so i flashed my epic 4g touch to metro pcs with talk and txt and need some guidance to add web and picture msgs does some on have instructions or a link?
Click to expand...
Click to collapse
This is the simplest and most effective method I've found, try this first:
http://forum.xda-developers.com/showthread.php?t=1912451

[ROM][T989UVMC6] Lightly Tweaked Stock [25/04]

Lightly Tweaked Stock
Purpose of Rom
You may have noticed that this rom unlike others is essential all stock. I've done this for the people who want a clean rom to start their own development from or just like the complete stock experience without the hassle of Odin and rooting afterword.
Features
Based off UVMC6 (4.1.2)
Deodexed
Rooted with supersu
CM10 APN
Screenshots
UVMC6 Related Issues
If you don't use a radio based on a 4.1.2 rom you will get no signal bars and may experience frequent disconnects. If you're on a provider other then t-mobile like me you will be able to connect to your data network provider if cm10 supports it but you will need to disable wifi calling in the settings.
Flashing Instructions
Use Odin to get a custom recovery (Tested on TWRP 2.5)
Wipe System/Data/Cache/Davlik/Preload
Flash Rom
Reboot
Let sit for 10 minutes
Reboot agian
Enjoy!
Download
2.0
Dev-Host
Size: 446.91 MB
MD5 Sum: a41bc802c8a6719016cf816b6749f96c
1.0 (Play Store might not work)
Dev-Host
Size: 446.92 MB
MD5 Sum: e5686d16172b58d723cd1776a9851913
Tethering Addon
Dev-Host
Size: 12.55 MB
MD5 Sum: 1c0ddbbc8dabe9caf5904c14a98b0da4
(Also disables CIQ)

Mine...
Sent from my SAMSUNG-SGH-T989 using xda premium

Sigh
No offense, but this is not development, this belongs in general.

bseager said:
No offense, but this is not development, this belongs in general.
Click to expand...
Click to collapse
I don't think you can post a rom in General. This is the right place to put it.
Sent from my SGH-T989 using xda app-developers app

bseager said:
No offense, but this is not development, this belongs in general.
Click to expand...
Click to collapse
I think your lost lol... No offense

Please add a tethering mod in here.. Otherwise great for me
Sent from my GT-I9300 using Tapatalk 2

Exactly what I have been looking for (since my usb failed). Thanks!
Sent from my SGH-T989 using xda app-developers app

Hi, I gave a sgh-t989d as well..do you have any problems charging to 100% using your rom? Right now I using Koragg618's stock rom and my phone is only changing to 97/98%.

Nice job on this. Guys be sure to expect a multi view ROM from team necessity. Will be based on this ROM

Looks pretty wife friendly lol thanks
Sent from my SGH-T999 using xda app-developers app

bseager said:
No offense, but this is not development, this belongs in general.
Click to expand...
Click to collapse
Alarmmy said:
I don't think you can post a rom in General. This is the right place to put it.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Absolutely you can.
jahrule said:
I think your lost lol... No offense
Click to expand...
Click to collapse
Perhaps I am, what have you done here then development wise other than posting a rooted stock 4.1.2.? Seems like there are about 20 threads in this forum that already that cover this.

bseager said:
Absolutely you can.
Perhaps I am, what have you done here then development wise other than posting a rooted stock 4.1.2.? Seems like there are about 20 threads in this forum that already that cover this.
Click to expand...
Click to collapse
If you don't know what the difference is between this and the other 20 then flash it and see or STFU and GTFU! :good:

wifi tethering
if you want wifi thering on a stock rooted rom then try this. download wifi tether widget from play store and set up name and password. then go to system-apps and delete tetheringprovisions.apk. then create new apn. name it tether. then on apn line enter epc.tmobile.com or whatever is in the apn line for your provider. save it you dont have to set it as your apn. you should have wifi tethering now:good:

freeandroid4248 said:
Hi, I gave a sgh-t989d as well..do you have any problems charging to 100% using your rom? Right now I using Koragg618's stock rom and my phone is only changing to 97/98%.
Click to expand...
Click to collapse
I've never had any problem's charging to 100% with UVMC6, did you try wiping your caches and/or data? You could try to charge to 100% in a recovery or when the phone is off and reboot that way, it's unlikely it's a hardware issue but if it is that would let you know.

skinsfanbdh said:
if you want wifi thering on a stock rooted rom then try this. download wifi tether widget from play store and set up name and password. then go to system-apps and delete tetheringprovisions.apk. then create new apn. name it tether. then on apn line enter epc.tmobile.com or whatever is in the apn line for your provider. save it you dont have to set it as your apn. you should have wifi tethering now:good:
Click to expand...
Click to collapse
Tetheringpervision.apk is hard coded into the framework-res.apk. For it to successfully work you would also need to decompile the framwork-res.apk and navigate to red/values/array and remove the part about tetheringpervision. Then recompile the apk and push it to system/framework. if you need help let me know.
Also the APNs need to be unlocked or you won't be able to change it. Last there is a hidden APN for tethering, if it isn't removed you will never be able to connect.

Jamison904 said:
Tetheringpervision.apk is hard coded into the framework-res.apk. For it to successfully work you would also need to decompile the framwork-res.apk and navigate to red/values/array and remove the part about tetheringpervision. Then recompile the apk and push it to system/framework. if you need help let me know.
Also the APNs need to be unlocked or you won't be able to change it. Last there is a hidden APN for tethering, if it isn't removed you will never be able to connect.
Click to expand...
Click to collapse
There's also a good guide for t-mobile touchwiz roms here , I'm going to upload a flashable zip with the mod incorporated in a few mins.

This is exactly what I was looking for.

namanjr said:
I've never had any problem's charging to 100% with UVMC6, did you try wiping your caches and/or data? You could try to charge to 100% in a recovery or when the phone is off and reboot that way, it's unlikely it's a hardware issue but if it is that would let you know.
Click to expand...
Click to collapse
It never happened in ICS...hrmm...I just tried to install your rom to see if it would help, followed the directions you posted;
namanjr said:
Lightly Tweaked Stock
Flashing Instructions
Use Odin to get a custom recovery (Tested on TWRP 2.5)
Wipe System/Data/Cache/Davlik/Preload
Flash Rom
Reboot
Let sit for 10 minutes
Reboot agian
Enjoy!
Click to expand...
Click to collapse
But, I can't seem to find google play store after I boot, or reboot, what did I do wrong?
Never mind, I decided to go back to ICS via odin and wait for the official update from koodo.

namanjr said:
There's also a good guide for t-mobile touchwiz roms here , I'm going to upload a flashable zip with the mod incorporated in a few mins.
Click to expand...
Click to collapse
Yes Jovy is one of my buddies. He and I trade modifications all the time. Anyways, like I said if you need a hand let me know... or you can just grab mine. That is fine with me as well.

Great!

It's there any way to get mms working on the new dirty unicorn 4.3 for virgin mobile?

It's there any way to get mms working on the new dirty unicorn 4.3 for virgin mobile??
Sent from my SPH-D710 using Tapatalk 2

mands386 said:
It's there any way to get mms working on the new dirty unicorn 4.3 for virgin mobile??
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
You will need to change you're mmsc URL to VM ... There are a bunch of guides for changing APN settings..

Can you give me a link I can't seem to find one thanks a lot man
Sent from my SPH-D710 using Tapatalk 2

mands386 said:
Can you give me a link I can't seem to find one thanks a lot man
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Second post in this thread.. http://forum.xda-developers.com/showthread.php?t=1794956
I've never did it this way...I use dialer codes and my msl to change apns..only touchwiz based ROMs...on cm/aosp/aokp based ROMs I change them with the voice dialer...say apns...input new APN or change current one...
That post has the working VM APN setting in it also...unless its been updated and I missed it..

Thanks again bro I greatly appreciate it
Sent from my SPH-D710 using Tapatalk 2

mands386 said:
Thanks again bro I greatly appreciate it
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
NP and if you hit a speed bump...just hit me up...

Same Problem
I have the E4GT on Virgin Mobile also. I love the Dirty Unicorn 4.3 Rom but I have the same problem I cant get MMS to work. Here is what I am doing. I am using the FJ12 Modem.
1. Wipe data and factory reset, cache, and dalvik cache.
2. Flash the Dirty Unicorn Rom.
3. Reboot into the rom.
4. Reboot into Recovery.
5. Flash GAPPs.
These are the fixes I have tried.
I open APNs and add the Virgin Mobile APNs. This is what I am using:
Name: Virgin Mobile
APN: Sprint
Proxy: <not Set>
Port:<not Set>
User Name: Sprint
Password: *
Server: <not Set>
MMSC:h t t p : / / m m s c . v m o b l . c o m : 8 0 8 0 / m m s ? (without the spaces)
MMS Proxy: 205.239.233.136
MMS Port: 81
MCC: 310
MNC: 00
APN Type: default,supl,mms
I then go to menu and hit save. The original Sprint APNs are there but the APNs I entered are not there.
I have also tried flashing the VMD710MMS+VisualVoicemailFix
However I am still unable to get MMS to work.
Edit:
I tried the Go SMS Fix also - that did not work.
I also noticed the my roaming settings wont stick. I am in an area where I must roam to get 3G data

I am having the same problem, although I opted for the GO SMS fix since I already use it. I will try the first set of instructions when I have time later and report back.
Edit:
Tried both ways and no dice.
Additionally, I have tried the MMS/Visual Voicemail Fix and it only causes a system process on my phone to stop working.
Any ideas?

I'm going to be trying this out a little later to see if it works just wanted to share it to see if it helps anyone
Sent from my SPH-D710 using Tapatalk 2

Finally got it working !!!
[email protected] said:
I have the E4GT on Virgin Mobile also. I love the Dirty Unicorn 4.3 Rom but I have the same problem I cant get MMS to work. Here is what I am doing. I am using the FJ12 Modem.
1. Wipe data and factory reset, cache, and dalvik cache.
2. Flash the Dirty Unicorn Rom.
3. Reboot into the rom.
4. Reboot into Recovery.
5. Flash GAPPs.
These are the fixes I have tried.
I open APNs and add the Virgin Mobile APNs. This is what I am using:
Name: Virgin Mobile
APN: Sprint
Proxy: <not Set>
Port:<not Set>
User Name: Sprint
Password: *
Server: <not Set>
MMSC:h t t p : / / m m s c . v m o b l . c o m : 8 0 8 0 / m m s ? (without the spaces)
MMS Proxy: 205.239.233.136
MMS Port: 81
MCC: 310
MNC: 00
APN Type: default,supl,mms
I then go to menu and hit save. The original Sprint APNs are there but the APNs I entered are not there.
I have also tried flashing the VMD710MMS+VisualVoicemailFix
However I am still unable to get MMS to work.
Edit:
I tried the Go SMS Fix also - that did not work.
I also noticed the my roaming settings wont stick. I am in an area where I must roam to get 3G data
Click to expand...
Click to collapse
I created a new APN and only changed the following settings:
Name: Virgin Mobile
APN: Sprint
User Name: Sprint
MMSC:h t t p : / / m m s c . v m o b l . c o m : 8 0 8 8 / m m s ? (without the spaces)
MMS Proxy: 205.239.233.136
MMS Port: 81
MCC: 310
Then I downloaded Roam Control ($4.00) google it (not available on playstore)
I set Roam Control to Automatic
Now I am able to send and receive MMS on Virgin Mobile.

[email protected] said:
I created a new APN and only changed the following settings:
Name: Virgin Mobile
APN: Sprint
User Name: Sprint
MMSC:h t t p : / / m m s c . v m o b l . c o m : 8 0 8 8 / m m s ? (without the spaces)
MMS Proxy: 205.239.233.136
MMS Port: 81
MCC: 310
Click to expand...
Click to collapse
How did you do this?

Bounty thread?
I've tried a bunch of stuff from several different threads, including just overwriting the APN xml file installed with the ROM with the xml file from the Virgin Mobile VisualVoicemail + MMS fix, which worked on the last 4.2 release, and I still can't get it to work!
If queendd gets back to me and that doesn't work I'm thinking about starting a bounty thread for this. Would anyone else be interested?
I for one would be willing to throw down a few bucks if it meant being able to use this ROM and having MMS working properly.

[email protected] said:
I have the E4GT on Virgin Mobile also. I love the Dirty Unicorn 4.3 Rom but I have the same problem I cant get MMS to work. Here is what I am doing. I am using the FJ12 Modem.
1. Wipe data and factory reset, cache, and dalvik cache.
2. Flash the Dirty Unicorn Rom.
3. Reboot into the rom.
4. Reboot into Recovery.
5. Flash GAPPs.
These are the fixes I have tried.
I open APNs and add the Virgin Mobile APNs. This is what I am using:
Name: Virgin Mobile
APN: Sprint
Proxy: <not Set>
Port:<not Set>
User Name: Sprint
Password: *
Server: <not Set>
MMSC:h t t p : / / m m s c . v m o b l . c o m : 8 0 8 0 / m m s ? (without the spaces)
MMS Proxy: 205.239.233.136
MMS Port: 81
MCC: 310
MNC: 00
APN Type: default,supl,mms
I then go to menu and hit save. The original Sprint APNs are there but the APNs I entered are not there.
I have also tried flashing the VMD710MMS+VisualVoicemailFix
However I am still unable to get MMS to work.
Edit:
I tried the Go SMS Fix also - that did not work.
I also noticed the my roaming settings wont stick. I am in an area where I must roam to get 3G data
Click to expand...
Click to collapse
ChrisMills83 said:
How did you do this?
Click to expand...
Click to collapse
I used the Voice Dial app and Spoke "Open APNs"
or
If you have Nova Laucher >
Long press homescreen and choose shortcuts, then activities.
Scroll down the list to Settings.
Expand Settings tab and choose APNs.
This will put the shortcut on your homescreen.
Choose the above mentioned items and change them to what is listed above.
*Remember I also had to install the Roam Control app to make this work. (roamctrl . c o m)

Tried the steps above and bought the roaming app. It's been 10 minutes and still nothing received yet to me or my wife.
I should mention that it doesnt let me save the APN settings after I've entered them in either. And it won't save it manually entering them into the APN XML file in /sys/etc either - something to do with root I think. I'm going to try flashing it as a zip file and see if that works and I'll report back later when I have time.

ChrisMills83 said:
Tried the steps above and bought the roaming app. It's been 10 minutes and still nothing received yet to me or my wife.
I should mention that it doesnt let me save the APN settings after I've entered them in either. And it won't save it manually entering them into the APN XML file in /sys/etc either - something to do with root I think. I'm going to try flashing it as a zip file and see if that works and I'll report back later when I have time.
Click to expand...
Click to collapse
I just realized this morning my MMS is broken again. I only thing I did was uninstall GO SMS. So, I reinstalled it and went to advanced settings and manually setting and changed the APNs manually using the above settings. Now it works again.

ChrisMills83 said:
Tried the steps above and bought the roaming app. It's been 10 minutes and still nothing received yet to me or my wife.
I should mention that it doesnt let me save the APN settings after I've entered them in either. And it won't save it manually entering them into the APN XML file in /sys/etc either - something to do with root I think. I'm going to try flashing it as a zip file and see if that works and I'll report back later when I have time.
Click to expand...
Click to collapse
I noticed that after flashing the MMS fix I could not save new apn settings. After a clean flash of DU and GAPPS I was able to save new APNs. The MMS fix makes the phone process fc also. Also, I would be interested in a bounty thread. I love this ROM and the broken MMS is the only deal breaker for me.

Take a look at the post from Soured Lie I cant test right now my phone's about to die and I don't have a charger I left it at home http://forum.xda-developers.com/showthread.php?t=2271247&page=118 or just use this link to download now all props go to Soured Lie https://www.dropbox.com/s/uxfgknepaa08f8f/VMEpic4.3aospMmsFix.zip

mands386 said:
Take a look at the post from Soured Lie I cant test right now my phone's about to die and I don't have a charger I left it at home http://forum.xda-developers.com/showthread.php?t=2271247&page=118 or just use this link to download now all props go to Soured Lie https://www.dropbox.com/s/uxfgknepaa08f8f/VMEpic4.3aospMmsFix.zip
Click to expand...
Click to collapse
After a clean install I applied this fix AND IT WORKED. I did a clean install to make sure the that this fixed it.

Glad to see you guys found a fix... I've been looking everywhere for you guys..Lol.
FYI..I did come across some info...that changing certain APN settings will cause the APN not to be saved. It was the port number in most cases.
Just don't change port number and save the APN...then go back and change it..or so I read...
Also...I only ever change my mmsc url .... But I'm boost...running sprint ROMs. Might make a difference...
Did anybody try this...its old. But who knows... http://forum.xda-developers.com/showthread.php?t=1758735

Gil81 said:
Glad to see you guys found a fix... I've been looking everywhere for you guys..Lol.
FYI..I did come across some info...that changing certain APN settings will cause the APN not to be saved. It was the port number in most cases.
Just don't change port number and save the APN...then go back and change it..or so I read...
Also...I only ever change my mmsc url .... But I'm boost...running sprint ROMs. Might make a difference...
Did anybody try this...its old. But who knows... http://forum.xda-developers.com/showthread.php?t=1758735
Click to expand...
Click to collapse
I think thats only for cm9

Set APN settings on bubor's CM10.2 RC1 build

hey guys can someone help me to set my apn settings on latest RC1 build of bubor (20131204-rc1). Why does it always asks me for MCC and MNC?? on old builds i just entered the name and the apn and it worked! :S help me please..I'm not from USA

mikaelmolto said:
hey guys can someone help me to set my apn settings on latest RC1 build of bubor (20131204-rc1). Why does it always asks me for MCC and MNC?? on old builds i just entered the name and the apn and it worked! :S help me please..I'm not from USA
Click to expand...
Click to collapse
apn file was remove 2 month ago:
https://github.com/buborh/android_d...8ebf41092ae0725f0aad663/configs/apns-conf.xml
You can put that, and see what.

bubor said:
apn file was remove 2 month ago:
https://github.com/buborh/android_d...8ebf41092ae0725f0aad663/configs/apns-conf.xml
You can put that, and see what.
Click to expand...
Click to collapse
Didn't work :/ it always asks me for MCC and MNC...and even if i fill them and then save it...it never saves...last build working for me was 20130902..thanks!
Edit:
just tried out OMNIROM ALPHA2 [4.4.2] on i could save my APN perfectly...don't know whats the problem with CM10.2 RC1..
Sent from my EK-GC100 using xda app-developers app

APN working now for me
mikaelmolto said:
Didn't work :/ it always asks me for MCC and MNC...and even if i fill them and then save it...it never saves...last build working for me was 20130902..thanks!
Edit:
just tried out OMNIROM ALPHA2 [4.4.2] on i could save my APN perfectly...don't know whats the problem with CM10.2 RC1..
Sent from my EK-GC100 using xda app-developers app
Click to expand...
Click to collapse
I had the same problem. Seems it does not automatically detect the carrier id. We have to insert it into the MCC and MNN manually
To get the id of the carrier:
Dial in the phone *#*#197328640#*#*, will get a menu of service, choose the followin options
[1] DEBUG SCREEN
[5] GPRS INFORMATION
FInally, look for the PLMN info, in my case is:
PLMN 708-2(0)
So:
MCC: 708
MNC: 020
with this data "Save" feature works

I skipped from 10.1 straight to 11, but none of the ROMs I've run ever had an issue detecting MCC/MNC. I found it interesting because my carrier gives those on their website, as if the phone isn't normally able to figure it out on its own.

[Q&A] eZKAT 4.4.2 ROM

Feel free to post any questions here. I will do my best to help.
-eZ
Sent from my iPad using Tapatalk

First is THANK YOU eZ for making this happen for all of us. This ROM is rock solid and it rocks!! Great job.
However I am having issues with my AT&T network. The stock APN is constantly stuck at 3G & 4G ONLY and drops internet or total connectivity (w/ LTE/WCDMA/GSM enabled). I 've tried adding and selecting the APN:
" Settings/Connections/More networks/Mobile networks/Access Point Names
Click what ever there, and change it to:
"Name: ATT Phone
APN: phone
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
APN type: internet+mms
Leave all other options blank!"
But it bounces back to stock default.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-I317 using Tapatalk

Hi im from mexico and actually i have installed your great rom eZKAT, long ago tried to install DN3 ROM did not work, had then had the stock 4.2.2 rom with root, Can I install the DN3 from EzKat?
In advance I apologize if I my question should not having done so in this thread.

1976Nano said:
Hi im from mexico and actually i have installed your great rom eZKAT, long ago tried to install DN3 ROM did not work, had then had the stock 4.2.2 rom with root, Can I install the DN3 from EzKat?
In advance I apologize if I my question should not having done so in this thread.
Click to expand...
Click to collapse
Yes...you'll be good...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 06:44 PM ---------- Previous post was at 06:40 PM ----------
slicingtaco said:
First is THANK YOU eZ for making this happen for all of us. This ROM is rock solid and it rocks!! Great job.
However I am having issues with my AT&T network. The stock APN is constantly stuck at 3G & 4G ONLY and drops internet or total connectivity (w/ LTE/WCDMA/GSM enabled). I 've tried adding and selecting the APN:
" Settings/Connections/More networks/Mobile networks/Access Point Names
Click what ever there, and change it to:
"Name: ATT Phone
APN: phone
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
APN type: internet+mms
Leave all other options blank!"
But it bounces back to stock default.
Sent from my SGH-I317 using Tapatalk
Click to expand...
Click to collapse
ATT Phone ...is the correct default APN..
Check your baseband...
It should be UCUBMK6...
Additionally ...the APN settings you listed above do not match the correct ATT APN...
Let it default...and check your baseband...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

I just flashed this last night. Works great, howeverit doesnt have themes. Im thinking about trying a 4.3 rom. My question is is there anything i should watch out for when switching from kitkat to jb and later possibly switching back.
Another question is is s pen enabled on this rom ? I cant find the icon to enable handwriting
Edit : im not able to enable handwriting, cant find the icon on the keyboard to enable it
Edit 2: the only way I can manage to switch to handwriting mode is to take out the s pen. Is the handwrite mode icon on the keyboard somewhere ? Also after I write a word it doesnt seem to enter into the texts, the writing pad just simply move to the right to show more writing room
Please some help, never had a samsung before not really familar with everything

optimusv45 said:
I just flashed this last night. Works great, howeverit doesnt have themes. Im thinking about trying a 4.3 rom. My question is is there anything i should watch out for when switching from kitkat to jb and later possibly switching back.
Another question is is s pen enabled on this rom ? I cant find the icon to enable handwriting
Edit : im not able to enable handwriting, cant find the icon on the keyboard to enable it
Edit 2: the only way I can manage to switch to handwriting mode is to take out the s pen. Is the handwrite mode icon on the keyboard somewhere ? Also after I write a word it doesnt seem to enter into the texts, the writing pad just simply move to the right to show more writing room
Please some help, never had a samsung before not really familar with everything
Click to expand...
Click to collapse
You have to DL the language in keyboard settings
Sent from my NoteII

Thank man but can you be more specific ? What is DL ?
Edit: I figured it out! DL means download ! It's working like it should! Thanks!

Just some feedback on my experience and installation:
Came from DN3 (I believe I'm on the MK5 N7105 kernel from the DN3 post)
-Did a clean (install new ROM) wipe using latest Philz
-Wipe Dalvik
-Flashed ROM
-Flashed SuperSU
-Booted fine with no problems other than no root
rebooted to recovery (Philz still) and re-flashed SuperSU
-booted fine again but no root
rebooted into recovery and used Philz fix root option
-booted again fine with root.
All told took less than 10 minutes as has been running fine since then (5 days). Super stable, fast and slick so thanks and good work eZ!
Hardware is a i317m on the Koodo network in Canada.
Only problem - no LTE icon, but I do get 4G which I understand is the same thing.

Can this be flashed over stock (but rooted) 4.3?
I feel like doing a dirty flash today.

Anonymously_Unknown said:
Can this be flashed over stock (but rooted) 4.3?
I feel like doing a dirty flash today.
Click to expand...
Click to collapse
Give it a shot and tell us how it worked out!

Air Command?
This may be a dumb question, but does this ROM have Air Command? Thanks.

No
Sent from the TermiNOTEr 2!

Kidvr6 said:
This may be a dumb question, but does this ROM have Air Command? Thanks.
Click to expand...
Click to collapse
No..but myself, @sawdoctor and @Bajanman are working with the Eteam currently to update dn3 to kit kat. So that will have air command. Keep an eye on that thread.
Sent from my NoteII

eZdubzitmk4 said:
No..but myself, @sawdoctor and @Bajanman are working with the Eteam currently to update dn3 to kit kat. So that will have air command. Keep an eye on that thread.
Sent from my NoteII
Click to expand...
Click to collapse
Thanks, will keep an eye out.

With this rom in place Do I still need to worry about att forcing an ota to me and me bricking because no stock recovery ?

optimusv45 said:
With this rom in place Do I still need to worry about att forcing an ota to me and me bricking because no stock recovery ?
Click to expand...
Click to collapse
No.
There will be no Ota pop ups. Even if there was you would have to click accept and stuff for it to download. Don't worry about it man.
Sent from my NoteII

Thanks man. I traded my note2 for a S4. Now I'm learning all these stuff about MF3 and safetrap, seems complicated haha he is open to trading back and I'm thinking about coming back to note2

optimusv45 said:
Thanks man. I traded my note2 for a S4. Now I'm learning all these stuff about MF3 and safetrap, seems complicated haha he is open to trading back and I'm thinking about coming back to note2
Click to expand...
Click to collapse
Not a bad idea....IMHO...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

the guy traded my note 2 back. S4 was great but note 2 is more fun

Thanks
Thanks for this. Two questions, will MJ4 bootloader work for this? and is Google Wallet tap and pay working?