Related
Well, something strange happened and i have no idea what the prob is
yesterday i installed a new kernel for my gnex and made a backup (using CWM) before flashing. Today i decided to go back to the previous kernel so i just went to recovery and restored from the backup. It installed successfully and then i rebooted my phone twice just to be sure everything was working and it was untill 4-5 hours later, I was playing a game (temple run) when suddenly the phone turned off and restarted by itself, i though maybe the game crashed and its restarting but i kept waiting for an hour but the phone was just stuck at the google logo. After waiting, i decided to go to recovery and flash a new kernal or restore but when i went to the bootloader and selected recovery, the phone didnt go into recovery but its stuck in google loop again. so somehow i think the recovery has been deleted of something like that because it gets stuck in loop if i go to recovery :/
i am on 4.0.3 codenamed android rom
Thanks
EDIT: I have already tried removing the battery for some time but still i am not able to enter recovery. i thought recovery was to prevent such things :$
You should probably use search next time. It's happened to quite a few people (myself included).
Use fastboot/ODIN to flash stock rom again.
case0 said:
You should probably use search next time. It's happened to quite a few people (myself included).
Use fastboot/ODIN to flash stock rom again.
Click to expand...
Click to collapse
Thanks but i wont be able to recover my data using this right?:/
No I don't think so, it sucks. I thought they had fixed this bug in 4.0.3 though which is strange. I lost my data twice within a month because of this, when I was on 4.0.2 (or maybe 4.01). Haven't had it since I rooted and updated.
Try flashing the recovery again. Maybe it will work.
case0 said:
No I don't think so, it sucks. I thought they had fixed this bug in 4.0.3 though which is strange. I lost my data twice within a month because of this, when I was on 4.0.2 (or maybe 4.01). Haven't had it since I rooted and updated.
Click to expand...
Click to collapse
can you tell me which tut to follow? i searched and found ODIN files for 4.0.4 and 4.0.2 but i'm on 4.0.3
sry but this is my first android phone and i have no previous knowledge
efrant said:
Try flashing the recovery again. Maybe it will work.
Click to expand...
Click to collapse
already tried that. manually and also using toolkit but i get the same error something like "recovery status read failed too many links"
Thanks for replies btw
rollerdyke44 said:
can you tell me which tut to follow? i searched and found ODIN files for 4.0.4 and 4.0.2 but i'm on 4.0.3
sry but this is my first android phone and i have no previous knowledge
already tried that. manually and also using toolkit but i get the same error something like "recovery status read failed too many links"
Thanks for replies btw
Click to expand...
Click to collapse
Use the Odin files for 4.0.4. Why are you looking for 4.0.3?
Sent from my Galaxy Nexus using Tapatalk 2
efrant said:
Use the Odin files for 4.0.4. Why are you looking for 4.0.3?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
well i am on codenamed android based on 4.0.3 so i was looking for 4.0.3 files for ODIN. this will flash my firmware to stock 4.0.4 right?
And do you know of ANY WAY i can fix my phone so that i can recover my data? I have tried everything but to no avail. i have tried flashing recovery, booting recovery (not flashing) using different usb ports and cables, flashing boot.img from codename android and everything i read online :/
rollerdyke44 said:
this will flash my firmware to stock 4.0.4 right?
Click to expand...
Click to collapse
Yes.
rollerdyke44 said:
And do you know of ANY WAY i can fix my phone so that i can recover my data? I have tried everything but to no avail. i have tried flashing recovery, booting recovery (not flashing) using different usb ports and cables, flashing boot.img from codename android and everything i read online :/
Click to expand...
Click to collapse
What happens when you boot CWM?
In order to recover anything, you need to be booted either into Android or CWM.
Maybe try using the "no-wipe" odin files, which may allow you to either boot into the ROM or allow you to boot CWM, and then you can retrieve your data. However, if this does work, I would recommend you wipe right after you retrieve your data, then restore your files, as you may have issues later on running with that data on your device.
efrant said:
Yes.
What happens when you boot CWM?
In order to recover anything, you need to be booted either into Android or CWM.
Maybe try using the "no-wipe" odin files, which may allow you to either boot into the ROM or allow you to boot CWM, and then you can retrieve your data. However, if this does work, I would recommend you wipe right after you retrieve your data, then restore your files, as you may have issues later on running with that data on your device.
Click to expand...
Click to collapse
thanks for your quick reply mate
I am not able to boot into recovery. When i select enter recovery from bootloader then it just loops on the google logo. When i try to reinstall cwm then it fails everytime with the error i mentioned above
ohh and btw, sometimes when the cwm installation fails then the bootloader gets stuck and the screen becomes kind of blurry and i have to take out the battery...... is that normal?
And i'll first try the no wipe files (from here http://forum.xda-developers.com/showthread.php?t=1586807&highlight=odin) and see if that works
rollerdyke44 said:
thanks for your quick reply mate
I am not able to boot into recovery. When i select enter recovery from bootloader then it just loops on the google logo. When i try to reinstall cwm then it fails everytime with the error i mentioned above
ohh and btw, sometimes when the cwm installation fails then the bootloader gets stuck and the screen becomes kind of blurry and i have to take out the battery...... is that normal?
And i'll first try the no wipe files (from here http://forum.xda-developers.com/showthread.php?t=1586807&highlight=odin) and see if that works
Click to expand...
Click to collapse
What happens when you boot CWM via fastboot?
fastboot boot cwm.img
efrant said:
What happens when you boot CWM via fastboot?
fastboot boot cwm.img
Click to expand...
Click to collapse
i get a blurry recovery mode picture (that hat kind of thing) for a couple of secs and then the phone reboots and again in boot loop[
rollerdyke44 said:
i get a blurry recovery mode picture (that hat kind of thing) for a couple of secs and then the phone reboots and again in boot loop[
Click to expand...
Click to collapse
Oou, that doesn't sound good. Not sure you'd be able to save your data.
efrant said:
Oou, that doesn't sound good. Not sure you'd be able to save your data.
Click to expand...
Click to collapse
well lets hope for the best
And i was on codenamed 4.0.3 so if i use the "no-wipe" files for 4.0.4 it should not cause anymore problems right?
I'll first use ODIN with no wipe files and if that doesnt work then i guess i'll say bye bye to my data and do a full wipe.
Thanks for you help mate and i will reply with the result in an hour or so (dinner time now )
Thanks again
EDIT:
so i ran ODIN but now its stuck. the start button has been greyed out with the following message
"<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
"
and the phone is on the ODIN download mode screen :/
EDIT 2:
when i use the full image, then the ODIN downloading screen on my nexus becomes blurry when ODIN on pc shows "<ID:0/011> NAND Write Start!! "
PLease help as i really dont know what else can i do
Fu*kkkkk
i think its bricked now i cant even access the bootloader the phone doesnt even turn on now i cant even get the google logo just a black screen
rollerdyke44 said:
Fu*kkkkk
i think its bricked now i cant even access the bootloader the phone doesnt even turn on now i cant even get the google logo just a black screen
Click to expand...
Click to collapse
It may not be bricked. Not being able to get into the bootloader can happen when you flash via odin.
Can you not boot into download mode (hold volume down and then press and hold power)? If you can, then you can still flash via odin.
I haven't really used odin too much, so I won't be able to help you troubleshoot too much (maybe ask in Chainfire's thread), but: if you can boot into download mode, do it, and re-follow the instructions in this post to-the-letter. Use the full odin image, not the no-wipe one.
efrant said:
It may not be bricked. Not being able to get into the bootloader can happen when you flash via odin.
Can you not boot into download mode (hold volume down and then press and hold power)? If you can, then you can still flash via odin.
I haven't really used odin too much, so I won't be able to help you troubleshoot too much (maybe ask in Chainfire's thread), but: if you can boot into download mode, do it, and re-follow the instructions in this post to-the-letter. Use the full odin image, not the no-wipe one.
Click to expand...
Click to collapse
noooooo
i cant even get the fone in download mode. the phone screen is completely black!!!! Wont even vibrate which shows its starting up
pleaaassseeee heeelppp
now i am getting scared for my nexus
rollerdyke44 said:
noooooo
i cant even get the fone in download mode. the phone screen is completely black!!!! Wont even vibrate which shows its starting up
pleaaassseeee heeelppp
now i am getting scared for my nexus
Click to expand...
Click to collapse
Take a slow deep breath and exhale. Take out the battery. Wait for a while. Put the battery back in.
Hold down the volume down button (not the volume up) and then press and hold power for 15 secs. See if that gets you into download mode. Even if nothing shows up on the screen, try following the steps in the odin thread.
You did make sure only the checkmarks that needed to be there were there in odin, correct?
efrant said:
Take a slow deep breath and exhale. Take out the battery. Wait for a while. Put the battery back in.
Hold down the volume down button (not the volume up) and then press and hold power for 15 secs. See if that gets you into download mode. Even if nothing shows up on the screen, try following the steps in the odin thread.
You did make sure only the checkmarks that needed to be there were there in odin, correct?
Click to expand...
Click to collapse
Which checkmarks should be used?
TwinkyOfHope said:
Which checkmarks should be used?
Click to expand...
Click to collapse
Why don't you take a look at the linked (a few posts up) odin thread and see for yourself?
I initially flashed the CM10 JB stable ROM successfully. The only problem I had was that I was unable to transfer files via USB to my computer, so I tried using the toolkit to flash the stock rom, but when it was flashing I got an error message that my phone disconnected.
When I turn my phone on I can only get into download mode. If i just press the power button, I receive a black screen.
I have tried using this http://forum.xda-developers.com/showthread.php?t=1771687 to flash the stock ROM using ODIN but the phone freezes at the Samsung logo screen after the T-Mobile "4G Android" screen.
Any help is truly appreciated
islam.osman said:
I initially flashed the CM10 JB stable ROM successfully. The only problem I had was that I was unable to transfer files via USB to my computer, so I tried using the toolkit to flash the stock rom, but when it was flashing I got an error message that my phone disconnected.
When I turn my phone on I can only get into download mode. If i just press the power button, I receive a black screen.
I have tried using this http://forum.xda-developers.com/showthread.php?t=1771687 to flash the stock ROM using ODIN but the phone freezes at the Samsung logo screen after the T-Mobile "4G Android" screen.
Any help is truly appreciated
Click to expand...
Click to collapse
can you get into recovery mode? if you can, try installing a rom from an external micro sd card (that you know previously worked)
islam.osman said:
I have tried using this http://forum.xda-developers.com/showthread.php?t=1771687 to flash the stock ROM using ODIN but the phone freezes at the Samsung logo screen after the T-Mobile "4G Android" screen.
Click to expand...
Click to collapse
If you got this far, then you need to do a factory reset.
idlejoe said:
can you get into recovery mode? if you can, try installing a rom from an external micro sd card (that you know previously worked)
Click to expand...
Click to collapse
I can not get into recovery mode. I can only get into Download mode for some reason.
Aerowinder said:
If you got this far, then you need to do a factory reset.
Click to expand...
Click to collapse
How would I be able to do a factory reset only using Download Mode?
islam.osman said:
How would I be able to do a factory reset only using Download Mode?
Click to expand...
Click to collapse
you cant. You need to boot into recovery. Trust me you can get in it, might take a few tries. Try to boot into recovery without the usb cable plugged in.With the phone completely off, and unplugged do the vol-up, home +power combo til it flashes that first screen, it can be a ***** but youll get in
Try turning the device off, remove the battery and leave it there for 60 secs. Make sure the phone is unplug from computer and the hit vol up, home, power until the phone vibrate then release. This should get the phone into the stock recovery.
billard412 said:
you cant. You need to boot into recovery. Trust me you can get in it, might take a few tries. Try to boot into recovery without the usb cable plugged in.With the phone completely off, and unplugged do the vol-up, home +power combo til it flashes that first screen, it can be a ***** but youll get in
Click to expand...
Click to collapse
I really do not think I will be able to get in. I have tried it so many times and even previously could only get into CWM recovery through the app on my phone to boot into recovery. I could never actually get in holding the vol-up+home+power.
Is it possible to flash CWM recovery through ODIN and download mode?
I'm not sure why this stock rom is freezing after I flash it through odin.
islam.osman said:
I really do not think I will be able to get in. I have tried it so many times and even previously could only get into CWM recovery through the app on my phone to boot into recovery. I could never actually get in holding the vol-up+home+power.
Is it possible to flash CWM recovery through ODIN and download mode?
I'm not sure why this stock rom is freezing after I flash it through odin.
Click to expand...
Click to collapse
pick ur poison--
cwm original--- https://dl.dropbox.com/s/tal5szplmicwfw5/cwm-norm.tar?dl=1
cwm touch--- https://dl.dropbox.com/s/td6q227c2iur53m/cwm-touch.tar?dl=1
twrp--- https://dl.dropbox.com/s/gegn4jfuc74sq1d/TWRP (3).tar?dl=1
i would suggest trying a different cable and if ur gonna use odin again, wipe everything (especially /system!) in recovery before booting into download mode for the odin flash. would also reccomend tryin the legit stock rom in odin (unrooted) if its still freezing on you.
Flash with Odin again, then after it is successfully completed power down phone you have to hold vol up home and power until you see some blue text appear in the top left corner then factory reset from recovery
Sent from my SGH-T999 using xda premium
Yea getting into recovery is tricky if you don't hold the buttons long enough (let go too soon). These guys really gave you great advice.
Sent from my SGH-T999
If you couldn't get into CWM recovery before you screwed the rom then you just aren't doing it right.with phone off, hold up and home, then hold powered button for like 3 sec then let go of only power... but i think you are right the download mode skips the Samsung logo.the recovery puts up Samsung logo before booting recovery. Why can't you Odin a recovery partition ?
Sent from my SGH-T999 using xda app-developers app
chrisram88 said:
Yea getting into recovery is tricky if you don't hold the buttons long enough (let go too soon). These guys really gave you great advice.
Sent from my SGH-T999
Click to expand...
Click to collapse
That they have, I took the battery out and let it sit for a little and tried it to get into recovery and it worked! I'm was able to boot up regularly after and I truly thank you all for the help because I was having a heart attack.
So I was installing modaco switch on my phone and it worked for a bit but then when I rebooted it it wouldn't turn on. I've tried flashing it in odin and nothing happened and it still doesn't work. I was wondering if anyone else had any ideas.
Can you access Odin? If so, I recommend flashing back to stock first.
joshua.justice said:
So I was installing modaco switch on my phone and it worked for a bit but then when I rebooted it it wouldn't turn on. I've tried flashing it in odin and nothing happened and it still doesn't work. I was wondering if anyone else had any ideas.
Click to expand...
Click to collapse
Are you able to get your device into ODIN/Download mode?
If so, flash the Samsung Stock Firmware as macboy3000 suggested.
To get your device into ODIN mode:
Power down device
Press Power and Vol down buttons and hold
Device should show an image
Press Vol up and you'll be in ODIN mode
Some helpful tips:
Follow the instructions via the red link in my sig.
Be sure to have enough juice in your battery
Have a good usb cord. This is the reason many ODIN flashes fail.
Check your md5 checksum match between the download file and your download prior to flashing the stock Firmware.
macboy3000 said:
Can you access Odin? If so, I recommend flashing back to stock first.
Click to expand...
Click to collapse
Biker1 said:
Are you able to get your device into ODIN/Download mode?
If so, flash the Samsung Stock Firmware as macboy3000 suggested.
To get your device into ODIN mode:
Power down device
Press Power and Vol down buttons and hold
Device should show an image
Press Vol up and you'll be in ODIN mode
Some helpful tips:
Follow the instructions via the red link in my sig.
Be sure to have enough juice in your battery
Have a good usb cord. This is the reason many ODIN flashes fail.
Check your md5 checksum match between the download file and your download prior to flashing the stock Firmware.
Click to expand...
Click to collapse
I tried flashing it twice and it still said successful when it finished flashing but continued to boot loop.
I'm not sure what would cause think
joshua.justice said:
I tried flashing it twice and it still said successful when it finished flashing but continued to boot loop.
I'm not sure what would cause think
Click to expand...
Click to collapse
After you flashed ODIN, did you go into stock recovery and Factory reset, then reboot, both from within Recovery?
Biker1 said:
After you flashed ODIN, did you go into stock recovery and Factory reset, then reboot, both from within Recovery?
Click to expand...
Click to collapse
No, I don't think it'll boot the stock recovery but I'll try that
If you flash stock and still receive boot loops, try going into recovery and wiping data and cache.
take out your sdcard too just for the hell of it.
I just reread your post, and your device is working fine, it's just that you want to know how to get Modaco Switch to work on your device with stability, because it stops working shortly after it's installed.
I had thought your device stopped working. I don't think ODIN will be your answer, and I don't about Modaco.
Maybe:
See if others have Modaco Switch working with stability, and if so:
try wiping cache & dalvik cache in Recovery, or try wiping first.
Biker1 said:
I just reread your post, and your device is working fine, it's just that you want to know how to get Modaco Switch to work on your device with stability, because it stops working shortly after it's installed.
I had thought your device stopped working. I don't think ODIN will be your answer, and I don't about Modaco.
Maybe:
See if others have Modaco Switch working with stability, and if so:
try wiping cache & dalvik cache in Recovery, or try wiping first.
Click to expand...
Click to collapse
It's not working fine. It doesn't boot at all. I tried going into recovery and it still boot loops even after flashing with odin.
joshua.justice said:
It's not working fine. It doesn't boot at all. I tried going into recovery and it still boot loops even after flashing with odin.
Click to expand...
Click to collapse
Ah, so I did read it right the first time. I saw the title the 1st time but I didn't see it the 2nd time, which is why I thought just Modaco wasn't turning on when I read your post without reading the title the 2nd time.
Plus I missed all the follow up posts. That's what I get for running around on my phone trying to read threads
With that being said, then what I wrote should resolve your issues.
Follow my RED link in my sig, and that should help to resolve your issues. I wrote out the steps previously, but looking at the link may help you
Biker1 said:
Ah, so I did read it right the first time. I saw the title the 1st time but I didn't see it the 2nd time, which is why I thought just Modaco wasn't turning on when I read your post without reading the title the 2nd time.
Plus I missed all the follow up posts. That's what I get for running around on my phone trying to read threads
With that being said, then what I wrote should resolve your issues.
Follow my RED link in my sig, and that should help to resolve your issues. I wrote out the steps previously, but looking at the link may help you
Click to expand...
Click to collapse
It doesn't boot into recovery so how can I wipe those?
joshua.justice said:
It doesn't boot into recovery so how can I wipe those?
Click to expand...
Click to collapse
You mentioned in the op you tried flashing in ODIN.
What exactly is your phone able to do?
Do you see anything on the display?
Does it boot into anything?
Etc...
What does 'tried going into recovery but it still boot loops' mean?
If you go step by step what you did before the issue and after, including Exactly what status your device is in, it will help in attempting to troubleshoot and resolve your issues.
I can get it into download mode but flashing Odin does nothing. When I hit the power button to turn it on it goes all the way until the t mobile logo and stalls. Sometimes it just vibrations off and on with a dark screen. When I try to go into recovery with the volume up and power keys or says 'rebooting recovery' in blue like it always does but then it just goes to booting normally and then hangs there.
joshua.justice said:
I can get it into download mode but flashing Odin does nothing. When I hit the power button to turn it on it goes all the way until the t mobile logo and stalls. Sometimes it just vibrations off and on with a dark screen. When I try to go into recovery with the volume up and power keys or says 'rebooting recovery' in blue like it always does but then it just goes to booting normally and then hangs there.
Click to expand...
Click to collapse
Can you confirm what version of the S4 you have?
The SGH-M919?
Not trying to be stupid or anything, just making sure.
Have you tried this..
1. Flash a recovery image using Heimdall (I'd suggest ClockworkMod)
2. Reboot to recovery. (Hopefully it goes through this time)
3. adb sideload a ROM to your device.
4. Flash the ROM.
5. Win?
Just trying to think of ways you can get your device back up and running.
joshua.justice said:
I can get it into download mode but flashing Odin does nothing. When I hit the power button to turn it on it goes all the way until the t mobile logo and stalls. Sometimes it just vibrations off and on with a dark screen. When I try to go into recovery with the volume up and power keys or says 'rebooting recovery' in blue like it always does but then it just goes to booting normally and then hangs there.
Click to expand...
Click to collapse
You have to:
Power down device
Don't power up
Press Power and Vol down buttons simultaneously
Press Vol up button
You should be in ODIN mode
Biker1 said:
You have to:
Power down device
Don't power up
Press Power and Vol down buttons simultaneously
Press Vol up button
You should be in ODIN mode
Click to expand...
Click to collapse
I did that. It's caked download mode. That's where I flashed Odin off my computer.
I noticed after flashing stock with Odin, I get bootloops, unless I do a factory reset. After stock flashes, it reboots into recovery and wipes cache by itself. When it finishes that and it starts to reboot by itself, I press the volume up button and go into recovery. I do a factory reset and reboot and all is fine, no bootloops.
norml said:
I noticed after flashing stock with Odin, I get bootloops, unless I do a factory reset. After stock flashes, it reboots into recovery and wipes cache by itself. When it finishes that and it starts to reboot by itself, I press the volume up button and go into recovery. I do a factory reset and reboot and all is fine, no bootloops.
Click to expand...
Click to collapse
Mine doesn't do that though. It just boot loops without going into recovery.
joshua.justice said:
Mine doesn't do that though. It just boot loops without going into recovery.
Click to expand...
Click to collapse
I understand that, my post is describing what happens when you flash a stock tar, not bootlooping, I am describing exactly what happens during the process of flashing a stock tar and how to avoid bootlooping, step by step. I guess you weren't paying attention when you flashed a stock tar with Odin, it reboots for the first time by itself and goes into stock recovery and wipes cache by itself, it's a normal process, maybe that part confused you. Any hows, good luck, I have explained step by step what I do to avoid bootloops and my directions are clear and simple. Bye.
ok so i was stupid enough not to do a nandroid backup.. now im trying to revert back to stock using odin and everytime i do it . it fails. been trying different things all morning and just cant figure it out. im guessing its soft bricked but im not sure. if i just turn it on without doing anything it says firmware problem someone please help asap i need my phone tonight and the frustration is kicking in
What file are you trying to flash? And what firmware were you on?
Sent from my SGH-M919 using Tapatalk
serio22 said:
What file are you trying to flash? And what firmware were you on?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
i was on the latest firmware stock and i tried to root and everything just went bad i started getting the kernel not seandroid enforcing thing and it would hang at tmobile screen then downloaded a stock firmware which i hope was the right one cuz it took so dam long then i get this error when trying to flash to odin. just want my phone back lol
ive went back to stock plenty of times and never got this error
micky14x360 said:
ive went back to stock plenty of times and never got this error
Click to expand...
Click to collapse
Use Odin 3.07. Run it as Admin if using Windows. Download the NB4 Firmware to your desktop. Inside the .zip will be a "M919UVUFNB4 HOME.tar.md5" file. Extract it to your desktop.
Remove the battery from the phone for about a minute. Put the battery back into your phone and hold down the Vol DOWN + Home + Power buttons until you get to the Download mode. Press Vol UP to enter it. Connect your phone to your computer via USB and wait for Odin to show it in the COM: section. UNcheck Auto Reboot and F. Reset Time. Click on the PDA tab and load up the "M919UVUFNB4 HOME.tar.md5" file on your desktop and wait for it to verify md5 (it will freeze for a little bit). Then click Start and see what happens. If it succeeds and says PASS, unplug the phone and hold down the power button until the device turns off and reboots itself. It will be 100% stock once you let it do it's thing and prepare the files.
micky14x360 said:
everything just went bad i started getting the kernel not seandroid enforcing thing and it would hang at tmobile screenl
Click to expand...
Click to collapse
The kernel not seandroid enforcing message is 100% normal after rooting your phone. That shouldn't have caused you any problems. Try restoring your phone back to stock firmware from above and see if that works. Then proceed to rooting the device again.
brian117 said:
Use Odin 3.07. Run it as Admin if using Windows. Download the NB4 Firmware to your desktop. Inside the .zip will be a "M919UVUFNB4 HOME.tar.md5" file. Extract it to your desktop.
Remove the battery from the phone for about a minute. Put the battery back into your phone and hold down the Vol DOWN + Home + Power buttons until you get to the Download mode. Press Vol UP to enter it. Connect your phone to your computer via USB and wait for Odin to show it in the COM: section. UNcheck Auto Reboot and F. Reset Time. Click on the PDA tab and load up the "M919UVUFNB4 HOME.tar.md5" file on your desktop and wait for it to verify md5 (it will freeze for a little bit). Then click Start and see what happens. If it succeeds and says PASS, unplug the phone and hold down the power button until the device turns off and reboots itself. It will be 100% stock once you let it do it's thing and prepare the files.
The kernel not seandroid enforcing message is 100% normal after rooting your phone. That shouldn't have caused you any problems. Try restoring your phone back to stock firmware from above and see if that works. Then proceed to rooting the device again.
Click to expand...
Click to collapse
ok thanks imma try that but that stupid ass file gonna take an hour to download so we will see what happens
brian117 said:
The kernel not seandroid enforcing message is 100% normal after rooting your phone. That shouldn't have caused you any problems. Try restoring your phone back to stock firmware from above and see if that works. Then proceed to rooting the device again.
Click to expand...
Click to collapse
well it just hung on the screen after that so idk imma do what u told me and pray it works
micky14x360 said:
ok thanks imma try that but that stupid ass file gonna take an hour to download so we will see what happens
Click to expand...
Click to collapse
You can also download it from the mirror here. It's faster.
http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip
brian117 said:
You can also download it from the mirror here. It's faster.
http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip
Click to expand...
Click to collapse
much appreciated.. will reply with what happen soon as possible
micky14x360 said:
well it just hung on the screen after that so idk imma do what u told me and pray it works
Click to expand...
Click to collapse
Make sure you restore to stock firmware and let the phone boot up at least once before you proceed to root it. Do NOT root it directly after flashing the stock firmware in Odin. If your phone hangs after the seandroid message, pull out the battery and put it back in, and hold Vol UP + Home + Power to boot into the stock recovery and select wipe data/factory reset and then reboot device.
brian117 said:
Make sure you restore to stock firmware and let the phone boot up at least once before you proceed to root it. Do NOT root it directly after flashing the stock firmware in Odin. If your phone hangs after the seandroid message, pull out the battery and put it back in, and hold Vol UP + Home + Power to boot into the stock recovery and select wipe data/factory reset and then reboot device.
Click to expand...
Click to collapse
gotcha im not too much of a noob but when something goes wrong imma SUPER NOOB lol
but its almost done ill let u know
micky14x360 said:
gotcha im not too much of a noob but when something goes wrong imma SUPER NOOB lol
but its almost done ill let u know
Click to expand...
Click to collapse
No problem hope it works. :highfive:
brian117 said:
No problem hope it works. :highfive:
Click to expand...
Click to collapse
thank you so much bro lol.. it worked. whats the quickest way to root from the version i have cuz i really dont wanna fuk up again
but that question u dont have to answer lol
micky14x360 said:
thank you so much bro lol.. it worked. whats the quickest way to root from the version i have cuz i really dont wanna fuk up again
but that question u dont have to answer lol
Click to expand...
Click to collapse
Sweet! You can use CF Auto Root from here
http://download.chainfire.eu/328/CF-Root/CF-Auto-Root/CF-Auto-Root-jfltetmo-jfltetmo-sghm919.zip
Just load it into the PDA slot and let it do it's magic. Make sure to do the same exact thing and UNcheck auto reboot and f. reset time and manually reboot the phone by holding the power button down.
Glad you got it working.
brian117 said:
Sweet! You can use CF Auto Root from here
http://download.chainfire.eu/328/CF-Root/CF-Auto-Root/CF-Auto-Root-jfltetmo-jfltetmo-sghm919.zip
Just load it into the PDA slot and let it do it's magic. Make sure to do the same exact thing and UNcheck auto reboot and f. reset time and manually reboot the phone by holding the power button down.
Glad you got it working.
Click to expand...
Click to collapse
thanks bro i appreciate it too much. id send u donation if i had paypal lol
micky14x360 said:
thanks bro i appreciate it too much. id send u donation if i had paypal lol
Click to expand...
Click to collapse
Nah bro don't worry about it. Getting your phone up and running is payment. :laugh:
brian117 said:
Nah bro don't worry about it. Getting your phone up and running is payment. :laugh:
Click to expand...
Click to collapse
thats wats up. is there anything specific i need to do before installing wicked 10? if not thats my last question. couldnt appreciate it more
micky14x360 said:
thats wats up. is there anything specific i need to do before installing wicked 10? if not thats my last question. couldnt appreciate it more
Click to expand...
Click to collapse
Bro ask all the questions you want. This is a community to help other people. The first thing you should do is install a custom recovery such as TWRP or PhilZ Touch Recovery. I prefer TWRP since it gives less installation errors for some ROMs. Once you install TWRP make a nandroid of the stock firmware and wipe everything. System/Data/Cache/Dalvik-Cache etc. and then install Wicked.
brian117 said:
Bro ask all the questions you want. This is a community to help other people. The first thing you should do is install a custom recovery such as TWRP or PhilZ Touch Recovery. I prefer TWRP since it gives less installation errors for some ROMs. Once you install TWRP make a nandroid of the stock firmware and wipe everything. System/Data/Cache/Dalvik-Cache etc. and then install Wicked.
Click to expand...
Click to collapse
bomb bro. ill do the twrp . and nandroid for sure so i never have this problem again lol
micky14x360 said:
bomb bro. ill do the twrp . and nandroid for sure so i never have this problem again lol
Click to expand...
Click to collapse
Definitely! Keep that nandroid safe. :highfive:
I have left my phone off for 2 days and when i go ahead to start it up it is stuck on the "Samsung galaxy s4"
Logo. I cannot enter recovery, only download mode. I flashed .tar stock file and still that doesn't work. Can anyone help me,?
Subzero000 said:
I have left my phone off for 2 days and when i go ahead to start it up it is stuck on the "Samsung galaxy s4"
Logo. I cannot enter recovery, only download mode. I flashed .tar stock file and still that doesn't work. Can anyone help me,?
Click to expand...
Click to collapse
Flash it twice. Boot into download - Flash once. Remove Battery. Boot into download - Flash again. Don't try to boot between flashes.
Also, get your .tar from here:
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Rob
rlichtefeld said:
Flash it twice. Boot into download - Flash once. Remove Battery. Boot into download - Flash again. Don't try to boot between flashes.
Also, get your .tar from here:
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Rob
Click to expand...
Click to collapse
Ive tried this process a million times and ive tried it again. It isnt working, and can only go into download mode. When i try to boot into recovery it just shows the blue saying "recovery booting..." but never goes into recovery, nor does it boot. Maybe a PIT file would work? Even though i think i dont need one, idk
Subzero000 said:
Ive tried this process a million times and ive tried it again. It isnt working, and can only go into download mode. When i try to boot into recovery it just shows the blue saying "recovery booting..." but never goes into recovery, nor does it boot. Maybe a PIT file would work? Even though i think i dont need one, idk
Click to expand...
Click to collapse
Try a different computer to flash it, or it is done for. Does ODIN indicate that there was an error flashing?
There is nothing else we can do for you on this forum, if it won't flash the stock firmware. That is the last resort. The firmware has everything you should need to be able to get it back working, if it is software related. It could be hardware.
Rob
rlichtefeld said:
Try a different computer to flash it, or it is done for. Does ODIN indicate that there was an error flashing?
There is nothing else we can do for you on this forum, if it won't flash the stock firmware. That is the last resort. The firmware has everything you should need to be able to get it back working, if it is software related. It could be hardware.
Rob
Click to expand...
Click to collapse
The stock firmware is what i have been flashing and it Odin does say 'Successful'. Since it has everything i need then i guess the phone is done for i opened the phone to checke the hardware, it seems the battery is a bit swelled, do u think that may play a role in this? And when i plug it in to charge the phone doesnt show battery status picture instead, it just keeps vibrating as if i were to plug in and remove the charger. The charger is brand new btw. I really appreciate ur help Rob.
rlichtefeld said:
Try a different computer to flash it, or it is done for. Does ODIN indicate that there was an error flashing?
There is nothing else we can do for you on this forum, if it won't flash the stock firmware. That is the last resort. The firmware has everything you should need to be able to get it back working, if it is software related. It could be hardware.
Rob
Click to expand...
Click to collapse
I'm getting somewhere, it seems as if only CWM recovery and PhilZ recovery work. Twrp does not work. I installed 3 custom roms and still didnt work, i tried restoring a back up and the phone restarts in the middle of it making as if it crashes. I went into the root of the phone and i realized the only folder that DOES NOT open is the 'boot' which now i am thinking when i flash anything the boot isnt sticking. Do u know if there is a boot tar file or zip that i can flash?
Subzero000 said:
I'm getting somewhere, it seems as if only CWM recovery and PhilZ recovery work. Twrp does not work. I installed 3 custom roms and still didnt work, i tried restoring a back up and the phone restarts in the middle of it making as if it crashes. I went into the root of the phone and i realized the only folder that DOES NOT open is the 'boot' which now i am thinking when i flash anything the boot isnt sticking. Do u know if there is a boot tar file or zip that i can flash?
Click to expand...
Click to collapse
If it is the boot partition, you'll need to update the firmware, not just the ROM. You'll have to do that with ODIN and a PC, not CWM nor PhilZ. TWRP works fine as long as you use v2.8.4.0 or earlier. The v2.8.7.0 has bugs.
If you are flashing different recoveries, you should be able to flash the firmware. Again, you HAVE to flash twice in a row for it to stick. Flash with ODIN. Remove battery. Flash again. Then, boot the phone.
Rob
rlichtefeld said:
If it is the boot partition, you'll need to update the firmware, not just the ROM. You'll have to do that with ODIN and a PC, not CWM nor PhilZ. TWRP works fine as long as you use v2.8.4.0 or earlier. The v2.8.7.0 has bugs.
If you are flashing different recoveries, you should be able to flash the firmware. Again, you HAVE to flash twice in a row for it to stick. Flash with ODIN. Remove battery. Flash again. Then, boot the phone.
Rob
Click to expand...
Click to collapse
I tried the oldest twrp and doesnt work, maybe ill try 2.8.4.0. I did that with odin. As soon as it installs and vibrates and shuts the screen i remove the battery and put it back in and go back into download mode and flashed again. It still did not stick. Or should i flash, then as soon it reboots i hold down volume to enter download mode, rather than remove battery?
Subzero000 said:
I tried the oldest twrp and doesnt work, maybe ill try 2.8.4.0. I did that with odin. As soon as it installs and vibrates and shuts the screen i remove the battery and put it back in and go back into download mode and flashed again. It still did not stick. Or should i flash, then as soon it reboots i hold down volume to enter download mode, rather than remove battery?
Click to expand...
Click to collapse
Uncheck the Reboot box on ODIN. Don't let it reboot. That is the problem. '
In ODIN. Load the .tar. Uncheck Reboot.
Boot into Download mode and Flash. DO NOT REBOOT.
Pull the battery.
Wait a few minutes.
Put the battery back in.
Boot into Download Mode. Flash.
Then reboot.
There are several threads about how to do this on this section of the forum and on the General section.
Rob
rlichtefeld said:
Uncheck the Reboot box on ODIN. Don't let it reboot. That is the problem. '
In ODIN. Load the .tar. Uncheck Reboot.
Boot into Download mode and Flash. DO NOT REBOOT.
Pull the battery.
Wait a few minutes.
Put the battery back in.
Boot into Download Mode. Flash.
Then reboot.
There are several threads about how to do this on this section of the forum and on the General section.
Rob
Click to expand...
Click to collapse
I did exactly that, i waited 10 minutes with the battery removed and redid process again. Not working ? why is it only cwm working and not twrp? I wonder whats making it work...
Subzero000 said:
I did exactly that, i waited 10 minutes with the battery removed and redid process again. Not working ? why is it only cwm working and not twrp? I wonder whats making it work...
Click to expand...
Click to collapse
At this point, I have no idea. But, IIRC when you flash the firmware, it should be replacing your custom Recovery (CWM) with the Stock Recovery.
So, are you flashing CWM after you are flashing the firmware? Or, are you trying to use CWM to flash the firmware? If so, that is the issue. You have to use ODIN with a computer to flash the firmware.
CWM, Philz and TWRP are for flashing ROMs, kernels, etc, not firmware.
Rob
rlichtefeld said:
At this point, I have no idea. But, IIRC when you flash the firmware, it should be replacing your custom Recovery (CWM) with the Stock Recovery.
So, are you flashing CWM after you are flashing the firmware? Or, are you trying to use CWM to flash the firmware? If so, that is the issue. You have to use ODIN with a computer to flash the firmware.
CWM, Philz and TWRP are for flashing ROMs, kernels, etc, not firmware.
Rob
Click to expand...
Click to collapse
No, i am not flashing anything after i flash the firmware. I am using odin to flash the stock firmware. Even stock revovery doesn't work. When u flash and it attempts to boot ,it shows the blue letters 'recovery booting' with the galaxy s4 logo and stays stuck there. At this point i am very lost. Do you think it's a power button issue?
Subzero000 said:
No, i am not flashing anything after i flash the firmware. I am using odin to flash the stock firmware. Even stock revovery doesn't work. When u flash and it attempts to boot ,it shows the blue letters 'recovery booting' with the galaxy s4 logo and stays stuck there. At this point i am very lost. Do you think it's a power button issue?
Click to expand...
Click to collapse
I would not think it is the power button, since you say it does turn on. And, it does seem the Volume rocker works, since it tries to get into Recovery and does get into Download mode.
Which version of the firmware are you trying to flash?
Depending on the version of the bootloader/modems, etc. you can't downgrade versions of the firmware. You can only flash the same version or higher.
Are you flashing the 4.4.4 from here?
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Are you sure you have a SGH-M919 version of the S4? If you look under the battery, it should have a sticker with that model number.
rlichtefeld said:
I would not think it is the power button, since you say it does turn on. And, it does seem the Volume rocker works, since it tries to get into Recovery and does get into Download mode.
Which version of the firmware are you trying to flash?
Depending on the version of the bootloader/modems, etc. you can't downgrade versions of the firmware. You can only flash the same version or higher.
Are you flashing the 4.4.4 from here?
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Are you sure you have a SGH-M919 version of the S4? If you look under the battery, it should have a sticker with that model number.
Click to expand...
Click to collapse
I tried the firmware from that posting and dkd not work so, i went and got it from sammobile.com and still didnt work. I had this phone for 2 years and yes it is Sgh-m919 4.4.4 i had on it. And i flashed a i9505 custom rom on it through twrp and worked flawlessley. The phone was off for 2 days and i turned it on and this happened :/
rlichtefeld said:
I would not think it is the power button, since you say it does turn on. And, it does seem the Volume rocker works, since it tries to get into Recovery and does get into Download mode.
Which version of the firmware are you trying to flash?
Depending on the version of the bootloader/modems, etc. you can't downgrade versions of the firmware. You can only flash the same version or higher.
Are you flashing the 4.4.4 from here?
http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Are you sure you have a SGH-M919 version of the S4? If you look under the battery, it should have a sticker with that model number.
Click to expand...
Click to collapse
Sir, i after following the procedure and didnt work i left the phone battery out and phone off for 3-4 days. I put the battery in today, literally just now and it somehow worked amd booted normally... it instantly sent goosebumps throughout my body because it just seemed so odd and unexpected with no reasoning for it to work now. Do u have any idea of what it may have been?
Subzero000 said:
Sir, i after following the procedure and didnt work i left the phone battery out and phone off for 3-4 days. I put the battery in today, literally just now and it somehow worked amd booted normally... it instantly sent goosebumps throughout my body because it just seemed so odd and unexpected with no reasoning for it to work now. Do u have any idea of what it may have been?
Click to expand...
Click to collapse
I have no idea. Just thank the gods of electronics and carry on.
But, it could be some sort of hardware connection that is sometimes connected and sometimes not. You may want to start looking for a backup or spare.
Rob
rlichtefeld said:
I have no idea. Just thank the gods of electronics and carry on.
But, it could be some sort of hardware connection that is sometimes connected and sometimes not. You may want to start looking for a backup or spare.
Rob
Click to expand...
Click to collapse
Id like to thank you a lot as u are an outstanding helper on xda. I warmly appreciate your kindness to guide me through the issue. Best wishes to you