I am having an issue, My phone for a while now loses responsiveness along a section of the screen from time to time (see attached image)
Recently it fell and that issue has become more or less permanent with the strip not showing any responsiveness most of the time and the entire screen not responding from time to time.
I was hoping someone can help me decide which of these 2 items I should buy to fix the issues since all the test I've run using screen calibration/testing apps show no signs of dead pixels and the screen itself has no cracks or anything that suggest the LCD is damaged. I'm currently on CM11 M8 and using developers options I've turned on the "show screen touches". this showed that from time to time there are constant touches on the right hand side of the black area between the white shown in the image.
Also if i'm in say whatsapp the send button falls exactly on that (right hand side) resulting in messages/voicenotes being sent before i finish. Do you think I have to buy 1 or 2
1. Full LCD Display + Touch Screen Glass Digitizer Lens Assembly for HTC One X
or
2. Touch Screen Glass Digitizer Lens Replacement for HTC One X
Would post the ebay links but i'm not not being allowed
m.jordan89 said:
I am having an issue, My phone for a while now loses responsiveness along a section of the screen from time to time (see attached image)
Recently it fell and that issue has become more or less permanent with the strip not showing any responsiveness most of the time and the entire screen not responding from time to time.
I was hoping someone can help me decide which of these 2 items I should buy to fix the issues since all the test I've run using screen calibration/testing apps show no signs of dead pixels and the screen itself has no cracks or anything that suggest the LCD is damaged. I'm currently on CM11 M8 and using developers options I've turned on the "show screen touches". this showed that from time to time there are constant touches on the right hand side of the black area between the white shown in the image.
Also if i'm in say whatsapp the send button falls exactly on that (right hand side) resulting in messages/voicenotes being sent before i finish. Do you think I have to buy 1 or 2
1. Full LCD Display + Touch Screen Glass Digitizer Lens Assembly for HTC One X
or
2. Touch Screen Glass Digitizer Lens Replacement for HTC One X
Would post the ebay links but i'm not not being allowed
Click to expand...
Click to collapse
1 is better
Related
Hi everyone.
My One X has screen like this on photos. It is a black spot on the left corner, and it seems like aprox 2mm of the left side is off (there are only small one colored stripes, width of 1px). What can be wrong - a display or maybe only tape connecting display with motherboard? Any other ideas?
Screen is dead. Maybe your phone was place beside laptop so it very hot, or something attack to lcd. Just keep use it or buy a replacement lcd
Sent from my HTC One X using Tapatalk
Hello everyone,
I have a Note 2 which has witnessed frong glass changes twice and whole screen change once (thank you, sister). The problem is, the last time I needed the whole screen replacement, I bought it 2nd hand from a guy who was either using dead phones' working screens or the ones he fixed.
Apperiantly my new screen is coming among those have been fixed. Because the screen is not correctly aligned to the outer glass. As it's a white phone I can easily see black frames (which are the areas of screen but no pixels there) are not equal when the screen is on. One more thing; my front camera is blurry and the notification LED is glowing a "half-circle". Other than that no problems there.
So my intention is; I want to seperate them and clean the adhesive completely so the camera and LED will be clean and I will be able to re-allign the glass to the screen.
My questions are;
1) How can I clean the whole adhessive without harming the screen
2) What can I re-attach the screen with? I think that Optic Clear Adhesives need Otoglav Machines and they are probably more expensive than a brand new Note 2 I am open to any suggestions about this material..
Thanks
No one?
Sent from my GT-N7100 using XDA Free mobile app
EDIT: Someone please move this post to troubleshooting, this is between my first posts on this forum, sorry.
Hello,
I have an issue with my T325, I have a white light bleed spot that is visible only on white or light pages between the two slim slots (in the middle of the screen but a bit to left). They are not dead pixels, many cheap phones have such a brighter spot.
I bought the tablet brand new 5 months ago, I have warranty for one and a half more years but it takes half a month or more until they see, repair and return the device if I send it in. (I haven't paid for premium service)
The spot appeared about 3 months ago but I told myself that I will not change my otherwise perfect screen for a brighter 0.3cm white spot even if it's a little annoying sometimes ( I had already exchanged two tablets until I got one without dead pixels or dirt inside the screen). I haven't dropped, pushed the screen on that point or did anything that could have damaged it.
However, at the beginning of this month i wiped my screen with a cloth that had something very hard on it and I didn't see and managed to get a deep 1 cm scratch (I can actually hook my nail in it) exactly in the middle of my screen and I didn't have a screen protector (who needs one on a tablet ? ). I am thinking on convincing somehow the service to change the screen because of the light bleeding. The two issues are unrelated, there is only one scratch on the screen clearly from a swiping motion.
Does anyone have an idea on whether the screen is defective or there is some strain in that point ?
Did anyone have a similar issue and managed to solve it ? Should I try sending it in ?
My 5 month old htc Desire 610 has encountered some Touch Screen issues. It has two "blank" or "broken" vertical lines where the touch screen does not respond and sometimes momentarily the entire touch screen doesn't work. For the past month, applying pressure to the rear upper right hand corner, behind the front facing camera, seemed to provide a temporary fix until now. I have ordered and replaced the entire touch/display but the problem still occurs. It is driving me MAD.
I think what caused it was a silicon case which I had, and when I was bored I would pull it off and on starting in the upper right corner.
The pictures I attached shows when I drag my finger slowly from left or right, a circle is made and the size depends on how long I left my finger there, my phone thinks I am leaving my finger just left of the two lines before continuing on the other side of the touch-screen-blank lines.
This all sounds confusing but help is very appreciated
I found the problem!!
I took the phone apart and placed a small padding behind the touch screen connector (the one coming from the top) and BANG! It works.
This may solve other touch screen issues out there.
Same Issue - Any Advice?
phcreery said:
I found the problem!!
I took the phone apart and placed a small padding behind the touch screen connector (the one coming from the top) and BANG! It works.
This may solve other touch screen issues out there.
Click to expand...
Click to collapse
I'm having the same issue, also have a silicone BodyGlove case which I also flip on and off when I'm bored and it's started screwing with the touchscreen. How'd you get the case of the phone open, what material (i presume something non-conductive) did you use for the padding, and do you have any pictures? I plan to document this procedure when I do it and post for reference. My phone is just over 7 months old, and I don't want to have to buy a new one just yet.
Thanks,
Thanks worked
Sent from my a3ul using XDA Free mobile app
Sometimes my phone gone blank while I using I have to close the apps and open again
phcreery said:
I found the problem!!
I took the phone apart and placed a small padding behind the touch screen connector (the one coming from the top) and BANG! It works.
This may solve other touch screen issues out there.
Click to expand...
Click to collapse
Works in my case too.
Thanks.
Hi,
Unfortunately for me i dropped my phone and cracked my tempered glass in several places. gladly the screen underneath was perfectly fine after drop however, it has developed a fault as the screen won't turn on at all. I tried turning it off and restarting and although i can hear the boot up logo sound i see no picture at all. i can receive calls but cannot answer due to screen not displaying.
The screen had four main pressure cracks.... one is top left, one on the ear speaker, one bottom middle and one bottom left of phone. hopefully you can see it in picture.
Can you give advice on what to try or do to resolve this? will i need a new screen or disassemble to see what the issue is?
I've only had the phone for 2/3 months at most
Thanks in advance
looks like i will answer my own question....
i bought a replacement lcd & digitiser, one complete unit and swapped the necessary components over to new screen. all is working and good. not sure if the screen is repairable but there are other parts inside this screen worth selling on. it still has a non cracked immaculate screen along with the charging port and other stuff inside old screen.
at a cost of £70, i consider this an expensive fix
Thanks for the input kakawak
cheers