I flashed TWRP and then Omnirom on my SM-T310. After boot, I get a message: Unfortunatly, NetworkLocation has stopped. Nothing more happens.
Can I rescue the installation or have I to flash a stock rom?
regards
Michael
Related
Stuck on "this package is for "baffin" devices this a "i9082", can't flash custom ROM
Hello Friends,
I am pretty experienced, but I've thrown just about the kitchen sink to this error. Edited scripts, used TWRP, recovery.img, different CWM builds, and all I can do is flash factory ROMS. Anybody have any insight how to solved this?
I tried updating from a CosmicCM to a higher build and got error 7. Couldn't get that error out, so i tried to flash CM11 unoffical and got this more detailed error.
Thanks,
Paul
Hi Guys,
This is my first time working with a custom ROM. I have an old S3 which sucks due to Samsung bloatware. So, I wanted to play and install Cyanogenmod on it.
I have a Rogers Samsung Galaxy S3 (Canada) and the model is SGH-I747M. I was following https://wiki.cyanogenmod.org/w/Install_CM_for_d2att to install the recovery image & Release build (https://download.cyanogenmod.org/?device=d2att&type=snapshot). I am using a Mac.
Steps I followed:
Installed Heimdall Suite on the Mac
Downloaded CM12 build & Google App and transferred it over to my phone's internal storage
Restared in download mode
Transferred recovery image
Restarted in recovery mode
Wiped/Factory settings
Apply Update -> cmbuild.zip file
It tried to install and then gave me a "Install Failed" error. I was then able to re-boot normally and get into the phone.
Any ideas, suggestions on what did I miss and what can I do? Is it ok to install the CM12 release build for my S3? Or do I need to go with CM11 or lower?
Thanks.
Flash twrp via heimdall to the s3. After flashing, boot into twrp and flash cm12.1 and gapps.
audit13 said:
Flash twrp via heimdall to the s3. After flashing, boot into twrp and flash cm12.1 and gapps.
Click to expand...
Click to collapse
Ok, so I tried what you suggested. I am still getting Install failed error.
The error says:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
E: Error executing updater binary in zip '/sdcard/d2att.zip'
UPDATE:
Fixed the problem by Formatting through TWRP and flashing CM12 & GApps again. Worked . Thanks for the help.
Glad you succeeded!
Can't find a loadable Lineage 14.1 rom I can use with odin. Evidently tried to flash the wrong one, now my phone will only
boot into download mode. Alternatively I could use a stock rom for S4 i257 to flash it back and start over, thanx for any help.
Try to follow all the steps found in here, still doesn't work, keep getting error messages, "signature verification failed, etc.
When I try to flash a custom ROM I get this error:
E: unkown command [retry_update]
E1001: Failed to update system image.
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/lineage-16.0-20200411-UNOFFICIAL-mondrianwifi.zip'
I am using the latest version of twrp(v3.3.1).
Any help is appreciated!
[FIXED]
Newsilk said:
When I try to flash a custom ROM I get this error:
E: unkown command [retry_update]
E1001: Failed to update system image.
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/lineage-16.0-20200411-UNOFFICIAL-mondrianwifi.zip'
I am using the latest version of twrp(v3.3.1).
Any help is appreciated!
Click to expand...
Click to collapse
I fixed it by flashing RR(android 7.1.2) and then trying to flash Los.
Sorry for dredging up an old thread, but I believe that this situation applies to me as well.
Today, I have tried multiple times to install the latest LineageOS onto my SM-T700 Samsung tablet using:
twrp-3.5.2_9-0-klimtwifi.img.tar
lineage-17.1-20210902-UNOFFICIAL-klimtwifi.zip
open_gapps-arm-10.0-nano-20210910.zip
[I also tried CrDroid (crDroidAndroid-10.0-20210903-klimtwifi-v6.21-LuisROM.zip) with the same result]
Each time I attempted to do this, I ran into the dreaded 'E1001' error. I had no idea what I was doing wrong, but I stumbled across this thread and successfully installed 'Resurrection Remix' (RR-N-v5.8.5-20201230-klimtwifi-Luis.zip) with the appropriate 17.1 OpenGapps (open_gapps-arm-7.1-nano-20210910.zip). I would much rather have the newest version of Android provided by LineageOS -- but this at least gave me the success I was looking for.
Why would installing Resurrection Remix 5.8.5 (Android 7.1) help in any way to making a subsequent install of LineageOS 17.1 (Android 10) successful?
@darethehair which stock was the latest you had on it?
Perhaps a newer bootloader would help.
I flashed twrp using odin and it worked but thats when the boot loop started, when installing the recovery from twrp it says error 07 I also tried the latest Resurrection remix for J7 6 with android 10 it also displayed the same message error 07.
now the device is unusable need urgent help. And can I flash Resurrection remix using odin tool??
Thanks in advance.
himel5551 said:
I flashed twrp using odin and it worked but thats when the boot loop started, when installing the recovery from twrp it says error 07 I also tried the latest Resurrection remix for J7 6 with android 10 it also displayed the same message error 07.
now the device is unusable need urgent help. And can I flash Resurrection remix using odin tool??
Thanks in advance.
Click to expand...
Click to collapse
As I can not read anything from the display in the attached photo, I can just guess.
Try to flash the correct and newest TWRP recovery with Odin to your phone.
Maybe it was not installed correctly.
If this does not work, you may have to flash back the original/official Samsung firmware with Odin.