Related
Hello all,
I have an unbranded desire (GSM), rooted with the latest unrevoked, and an official ROM.Today I have received a new update OTA… something with Android Market in size of 28.87 MB. I’ve tried to install but I have not succeeded. For more info about my phone see the attached pictures.
Now the details: I saw that the update was not working , so I decided to “force “ the install process using the install update.zip from clockwork mode (2.5.0.7) and toggle signature option (it was a message about some signature error). Everything looked fine, all the process and then a message tells me to restart. Since then a loop started: white screen with green letters for HTC logo and after that a restart. And again, and again…
I have a backup on sd card. But when I try to access, the recovery menu shows me a dark screen with a phone and a red triangle with “!” sign in it. I have also the official RUU but my computer refuses now to see my phone despite of a very good link between them. Two days ago I have installed the official RUU and the connection was ok. Maybe it is because my phone is not loading all of the starting process.
Help me please with some ideas, advices. Thank you.
You can't apply an OTA to a rooted Desire without issues - how many more poeple are going to do this before reading threads and realising this!!!
You'll have to hard reset and if that doesn't work flash a stock RUU and root again
PLease tell me how to hard reset or how to flash a stock RUU. please remember i can't connect to the computer because it's not loading all the starting process
You can either:
1. Download the 2.29.405.2 RUU from shipped-roms.com and flash it via FASTBOOT
or
2. Download the 2.29.405.2 PB99IMG from shipped-roms.com and flash it via HBOOT after renaming it PB99IMG.zip instead of the long file name I used, copying it to the root of your SD card and booting into HBOOT and following the instructions
Thank you very much for your quick answer.
But please be more specific
1. How to flash it via FASTBOOT?
2.Please give me step by step instructions on how to boot the zip file.
Sorry for being annoying. And sorry for my english
For RUU:
1. Download RUU from this link
http://www.multiupload.com/UOWLL86GVB
2. Turn off your phone
3. Turn it on again whilst holding the back button
4. Once the white screen with the 3 Androids at the bottom says FASTBOOT connect to PC with USB cable and it will change to say FASTBOOT USB
5. Run the RUU
6. All being good you'll be on stock 2.29.405.2
To flash the PB99IMG.zip:
1. Download the ZIP file from here:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.zip
2. Turn off phone
3. Remove SD card from phone and connect to PC using a card reader and a micro to normal adapter
4. Rename the ZIP file to PB99IMG.zip (not PB99IMG.zip.zip) and copy it to the root of your SD card (root = not in any folders)
5. Put SD card back in your phone
6. Turn it on whilst holding volume down
7. Follow instructions on the phone
8. Once done you should be on stock 2.29.405.2
BOTH OF THESE WILL NEED YOUR GOLD CARD TO COMPLETE
thanks. Starting now...
JOB DONE... SMOOTHLY
You do it by RUU OR PB99IMG btw - NOT both
JOB DONE SMOOTHLY. Thanks a lot.
No probs, keep the RUU or PB99IMG to hand in case you need them in future
My P3300 is without a rom. I had problems previously and had to install the original rom via bootloader mode. It worked for a while then began to freeze and automatically restart at times. tried to upgrade the rom to a different version but was not successful. it gave me the restore mode but was also not successful. Now my phone is without a rom and i cannot install any rom to it as well. it gives me Invalid vendor id error or corrupt image for all the previous working roms i tried. it begins the update then the phone reboots at 2%. need help desperately.
You can try to flash your device with the SD_Card Flash method look for it here:
http://forum.xda-developers.com/wiki/index.php?title=Artemis_SD_Card_Flashing
1. Download the original rom for your device that was installed at the beginnig you bought the device with.
2. Extract all the contents of the installer file (winrar or a similar prog.)
3. navigate to the extracted original rom (RUU_signed.nbh)
4. Rename the file to ARTEIMG.nbh and put it in the root of your storage card
5. put the card back in to your device and hold down the voice button after you press the power button.
6. Now your bootloader should show up and check for the ARTEIMG.nbh on your storage card.
7. Slide down the volume button and it should begin to flash your device.
8. After flashing process is finished. Power device off and do a hard reset.
If your device is working again and you need further help for unlocking your device (Super-CID) to flash custom roms pm me or post in this topic.
i followed following steps
**********************************************
S-OFF + root with flashing method
New mothod of rooting HTC WildFire (buzz) - credits go out to androidybloidy from xda.
Full topic over to xda: Rooting HTC Wildfire (BUZZ) 2.2.1 with HBOOT 1.01.0002 !! FULL GUIDE (28/6/2011) - xda-developers (sorry for copy/paste, but i really don't have the time and i wanted to save the thread somewhere else besides xda)
S-OFFing the Device
Downgrade to HTC Froyo WWE for AlphaRevX (HBOOT 1.01.0001)
You can't s-off HBOOT 1.01.0002 !
Therefore, downgrading the HBOOT to 1.01.0001 is must for the meantime, to get an efficient S-OFF.
So, here’s a small package to help you do this.
click here.
Extract this package somewhere you can find it, like your “Desktop” for example.
Step 1: run step1.bat from the package. This will downgrade your MISC partition to allow for the RUU downgrade.
At the end, GoldCardTool will start up, to allow you to create a goldcard which you will need before starting Step 2.
How to deal with Gold-Card Tool:
1. Switch off your phone, remove your microSD card.
2. Insert the microSD card into your card reader, connect it to your computer and format the card to FAT32 file system.
3. Insert the card into your HTC Wildfire and power it on.
4. Make sure USB Debugging is enabled on your phone in Menu > Settings > Applications > Development.
5. Connect the phone to your computer via USB and set the mode to charge only.
6. Launch Gold-Card Tool on your computer and click ‘GetCID’.
7. Copy the CID code from the text box and click the link shown below that text box to open it in your browser window.
8. In the browser window, enter all the details required and submit that form.
9. You should now get an email from PSAS in a few minutes. Open it and download the ‘GoldCard.img’ attachment.
10. Now set your phone’s USB mode to Mass Storage.
11. In Gold-Card Tool, click ‘Refresh’.
12. Select your mounted SD card from the drop-down menu saying “HTC MMC:”
13. Click ‘Load Goldcard.img’ and select the file downloaded in Step 11.
14. Click ‘Patch MMC’ and your Gold Card will be created. You may exit Gold Card Tool once done.
After you've made the goldcard, and patched it, continue with step 2.
Step 2: run step2.bat from the package. This will downgrade your ROM version to HTC WWE Froyo for Wildfire (unbranded).
If you get a Customer ID error while doing this, your goldcard is not working!
Create a new goldcard and re-run step2.
AlphaRevX
* Steps:
1st You need to get to: alpharev.nl/x/beta/ to download the tool, and to get your “beta key” which you’ll get in a pop-up window in the same download page after you click the download link for (windows version).
The “beta key” is a must; the tool won’t work without it!
You’ll be asked to provide your phone “serial no.”, typically it should be something like HTXXETDXXXXX, and you can get it from:
Settings --> about phone --> phone identity.
Now, do the following:
1. Run latest version of HTC Sync on your PC and connect phone in HTC Sync mode and sync all your files. Remove HTC Sync and not the drivers.
2. Reboot phone.
3. Settings->Applications->Development->Check “USB Debugging”.
4. Run AlphaRevX and connect phone to PC in “Charge Only mode”.
5. AlphaRevX should recognize your phone and show your Device Serial number.
7. Type out the “key” in the AlphaRevX software, keeping in mind the upper and lower case letters and press enter (you can copy / paste the key).
8. AlphaRevX should start doing its job and you’ll get S-OFF in less than 90 seconds.
9. If it takes longer, just wait for the 15 minutes mark, if nothing, then reboot phone and retry.
(Some members got S-OFF after multiple tries)
Rooting the device:
Step 1 - Installing the USB drivers
Download USB drivers (here) and extract them on desktop. Turn off your wildfire and boot into HBOOT by holding the VOLUME DOWN + POWER button. Connect your phone to your PC and it will show "drivers installing" or similar there for Android device. When prompted, install the drivers by going to device manager and browsing to the folder where you extracted the drivers. Once installed, disconnect and reboot your phone normally.
Now you need to install the “Android bootloader interface”.
Connect your HTC wildfire to the PC and it will ask for drivers again, now go to device manager, click on unknown device “other devices”.
Click on update driver -> install from specific location -> No i will choose to install -> choose Android phone and click on “adb interface” -> click next -> when asked to install click on continue anyway, just install them.
Once done you will see your phone recognized as "Android bootloader interface".
Now disconnect your phone and go into:
Settings -> applications - > development - > enable USB Debugging.
Step 2 - Downgrading from Android 2.2.1 Froyo to Android 2.1 Éclair
Download the RUU rom (here) which is an original stock rom. Plug your phone into the PC and set it to "Charge through USB". Double click RUU rom .exe
Follow the on screen instructions and then let it install. Your phone will reboot into stock HTC 2.1
This will be the last time you will be seeing it though.
A little extra here by me: if you download that RUU and notice after you've completed this step your touch doesn't work, don't panic. Just get a different RUU and flash again. I can't remember if i used RUU_Buzz_hTC_Asia_India_1.25.720.1_Radio_13.45.55. 24_3.35.15.31_release_142213_signed or RUU_Buzz_hTC_Asia_WWE_1.25.707.1_Radio_13.45.55.24 _3.35.15.31_release_142190_signed
but you can find more over at Shipped ROMs
Step 3 - Gaining root using Unrevoked, get ClockworkMod and set your phone free
Download the test version of unrevoked (here). Let me repeat, DO NOT USE UNREVOKED 3.32 as it will lead to CID errors or to be precise this error
"Validation error, backup CID is missing"
This may be caused as the 3.32 does not support the HBOOT. Hence you need specific test version of Unrevoked 3.2 to do the job. Download it, save it on desktop, and run it. Now connect your phone and the rooting will start. Once done, you will have ClockworkMod recovery installed on your phone.
Reboot your phone now (using the VOLUME UP/DOWN key for navigation and clicking using TRACKBALL, the POWER button takes you back in menus). Once rebooted, you will see the “Superuser” app in your phone and.... done.
Now you can download and flash cm-7 or whatever.
*********************************************
After step 2 touch screen is dead and can't put usb debugging ON.
After rebooting my phone is receiving calls but can't attend.
my HBOOT screen showing..
-Revolutionary-
BUZZ PVT SHIP S-OFF
HBOOT-6.01.1002
MICROP-0622
TOUCH PANEL-SYN3KY_01
RADIO-3.3515.31
please help me..
Install a RUU then retry the steps for rooting.
Sent from my HTC Wildfire using XDA App
but i cant on usb debugging
you shouldnt need usb debugging for a ruu.
Try to get an update file wich you can flash in Hboot. There are ones, but i dont now where... Take a sdcard reader and put the file on it.
firstly can you still get into recovery by your bootloader? if you can then flash this.
http://download.cyanogenmod.com/get/update-cm-7.1.0.1-buzz-signed.zip
then this http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
but remember to wipe your cache, dalvick cache and factory reset the phone. (all done in recovery) if that works you should be on cyanogenmod 7 and that will hopefully fix your issue.
hello there..same problem with me but resolved, successfull CM7 nightly..
try to flash with the
RUU_Buzz_HTC_WWE_1.37.405.1_Radio_13.53.55.24H_3.3 5.19.25_release_151892_signed.exe
find it in the web, run, and then you got your touchscreen works
Go to an S-ON and Unrooted state, from this guide I made.
Then use this guide I made to start over again without touchscreen problems. Quite a few people have had touchscreen problems using the other guide.
Post 1: How to unlock your bootloader, flash a recovery and root
Post 2: How to flash a custom ROM and kernel (boot.img)
Post 3: How to reverse everything and go back to stock
Post 4: How to ADB Sideload a ROM
Alright. This is for everyone who wants to root their phone. I've seen MULTIPLE threads of the same question "Can I root my phone and How do I do it". So I hope I never have to see it again! In this tutorial, I use use my toolkit as the way to root. Doing it manually takes forever and that is why I made my toolkit.
Requirements:
HTC One X (charged to at least 70%)
Windows XP,Vista,7 (8 is not officially supported since I don't have the drivers)
USB cable
Ability to read and follow step-by-step
Understanding that I am no way guaranteeing anything. If you screw up your phone, you probably didn't follow my steps and made a foolish mistake.
Let's begin.
Download my toolkit from here.
Link 1 and Link 2
Extract the FOLDER to your C: drive or to your desktop.
MAKE SURE YOUR DIRECTORY DOES NOT HAVE A PERIOD OR SPACE.
Open One X.exe
So now you have my program open. Great.
On your phone, go to Settings -> Developer Options and Enable USB Debugging.
From my toolkit, Click 1. Install HTC Drivers.
After the drivers install, restart your computer.
After your computer loads up, open my toolkit and connect your phone to the computer. Your phone should now be recognized.
Now, click 2. Register at HTCDev. Register with a VALID email address and LEAVE the web browser open.
Now, under the commands section of my toolkit, press Boot into Bootloader.
You should have a nice, white, shiny screen that says FASTBOOT USB.
Click 3. Get Token ID. Look at the pop up and it will tell you how to get the Token ID.
Highlight where it says < < < < Identifier Token Start > > > > all the way to < < < < < Identifier Token End > > > > > and right click and it will automatically copy it.
Now, click Submit Token ID. Your web browser should now open a new tab. Scroll down and in the empty box, paste your Token ID. Press submit. HTCDev now emailed you your unlock token.
Your phone should still be in the bootloader. Now, go to the email address you registered to HTCDev and DOWNLOAD your unlock_code.bin. Press 5. Unlock Bootloader. Locate your unlock_code.bin and it will flash it to your phone.
READ the warning. THIS WILL WIPE ALL YOUR DATA FROM THE PHONE.
When you agree to it, press the volume up button and press the power button to accept it. Your phone will now restart.
When your phone loads up, go through the set up wizard. Then, on your phone, go to Settings -> Developer Options and Enable USB Debugging.
Under the Extras section, press Perm Root. It will push SuperSU.zip to your phone.
Under commands, press Boot into Bootloader once again.
Now, it is time to flash a recovery.
TWRP (Team Win Recovery Project) is a custom recovery that will allow you to flash custom ROMs, Mods, etc.
CWM (ClockWorkMod) is a custom recovery that will allow you to flash custom ROMs, Mods, etc.
I recommend TWRP and we will use it for this tutorial,
Select TWRP and press Flash Recovery.
After it flashes, remove the USB cable and have HBOOT selected in bootloader. Press the power button and it will reload to another screen. Press the Volume Down button until you get to Recovery. Press the power button to select it.
Go to Backup and back up your boot and system partition. Always have a back up before you flash or do anything.
After that, go to Install and locate SuperSU.zip. Click it and slide the screen on the bottom to flash it. After it flashes, reboot the phone.
In your app drawer (your menu with all the apps), open SuperSU. If it says the binary needs to be updated, then update it. If it doesn't, then you are fully rooted!
Post 2: How to flash a custom ROM and kernel (boot.img)
The fun part! Now, I will teach you how to flash a ROM and boot.img
Find a ROM you like, the first thing you should do is make sure it is COMPATIBLE with your phone. If you find a ROM that is for AT&T (Evita) and you have the International model (Tegra3), don't be an idiot and flash it. I will not help you with that since you already agreed to my warning from the first post.
International models won't work on an AT&T HOX and Vice Versa.
Also, DO NOT ASK IF YOU CAN FLASH A ROM FROM ANOTHER DEVICE!
Will it work? NO! Will it ever work? NO! Can I flash it anyways? Brick your device, I don't care. I warned you.
Let's get back on task. So you found the ROM you want to try, so go ahead and download it. KEEP THE THREAD OPEN! MAKE SURE YOU READ EVERYTHING AND REREAD IT AGAIN! READ WHAT USERS SAID ABOUT IT AND ABOUT BUGS! GO AHEAD AND READ THE WHOLE ENTIRE THREAD! GAIN KNOWLEDGE!!
Connect your USB cable to your phone. View the folders on your phone. I like to make a folder called ROMs on my phone and transfer it in there.
After you transfer it, open my toolkit and press Boot into Recovery. When you are in TWRP, MAKE A BACKUP!!!
After you make a backup AKA a Nandroid, click Wipe. Wipe Cache, Dalvik, Factory Reset and System. NOTHING ELSE! If you click anything else, IT WILL WIPE YOUR SD CARD AND YOU WILL HAVE MORE ISSUES ON YOUR HEAD!
So you wiped everything. Great. Your phone is ROMless, Yay!
Now go back and press install. Go to the folder where the ROM you downloaded, is located in. Select the ROM and slide the screen to flash it. After it flashes, press the back button. Press Reboot and Reboot into bootloader. Open the ROM you downloaded from your computer. You should see boot.img. Extract it to your computer. Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it.
After it flashes, press reboot from the phone.
Congrats! Enjoy your fully working or borked ROM! Remember, DO NOT ASK FOR ETAs, DO NOT BUG/PM A DEV ABOUT UPDATES, and BE RESPECTFUL TO THE DEVELOPERS!
Post 3: How to reverse everything and go back to stock
Now, let's talk about getting back to stock. There are 2 ways to do this.
1. Flash the stock RUU (If available) (Recommended)
2. Restore your Nandroid (backup that I told you to make earlier)
1. I'll talk about flashing the stock RUU first.
Go here and download the RUU.
http://forum.xda-developers.com/showthread.php?t=1543604
Download the correct RUU for your phone.
Now, back up all your data (pictures, contacts, etc) since this will put your phone back to complete stock.
Connect the USB cable to your phone. Press Boot into Bootloader.
It should now say FASTBOOT USB on your screen.
Press Relock bootloader. It may give you a security warning error or it may say failed. Who cares, ignore it. It's normal.
Your phone will boot up normally.
When the phone is fully loaded. Unplug and replug the USB cable back in the phone. Now,run the RUU you downloaded and follow the instructions.
Your phone will be back to stock.
2. Now, we will talk about restoring your nandroid backup.
Connect your phone to the computer. Open up the folder to view the files on your phone.
From your computer, Go to TWRP -> BACKUPS -> (Your hardware Serial Number) -> (Folder you wish to restore to) -> and copy boot.emmc.win to your computer. Rename boot..emmc.win to boot.img
Open my toolkit and press boot into recovery.
Click Wipe. Wipe Cache, Dalvik, Factory Reset and System. NOTHING ELSE! If you click anything else, IT WILL WIPE YOUR SD CARD AND YOU WILL HAVE MORE ISSUES ON YOUR HEAD!
Press back and press Restore. Choose the backup to restore to.
After it finishes, press the back button. Press Reboot and select bootloader.
Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it.
You are now back to your stock Nandroid.
4. How to use ADB Sideload
You may have seen what ADB Sideload around the forums but have no idea what it is. Since the HOX does not have an SD card, it makes things harder when you have to flash a ROM.
Here's a scenario when we need to use ADB Sideload.
1. You accidentally wiped your internal SD and have no ROM on your phone
2. You wiped your ROM and forgot to transfer a custom ROM/have no backups(Nandroid) available.
3, You have none of the above and there is no available RUU for your phone. <----- This is a real bummer.
Here are the steps to load on a ROM
I placed TWRP in my toolkit for a reason. CWM does not support ADB Sideload (as far as I know) and TWRP does.
Boot into recovery manually. Turn your device off and hold the VOLUME DOWN + POWER button together until the BOOTLOADER pops up. Press the VOLUME DOWN button until you have selected RECOVERY. Press the POWER button to get into RECOVERY.
Connect the USB Cable to your phone and computer.
In TWRP, click "Advanced" and select ADB Sideload.
Download a ROM to your computer (if you haven't already done so). Rename it as one word. For example CM10.zip, QX.zip, ARHD.zip, etc.
In my toolkit, under the extras section, press ADB Sideload a ROM. Press "Yes" when it asks you if you are in recovery. Then select the ROM you want to install. It will then sideload it to your phone and flash it.
After it finishes, press the back button. Press Reboot and select bootloader.
Pull the boot.img from the zip file and extract it.
Open my toolkit and press Flash a Kernel. Locate the boot.img and it will flash it.
You now have a ROM on your phone!
1 more, just in case.
and yes, i know. Wrong section. posted here by accident.
thanksss
Thanks for the info you provided.
Hasoon, quick suggestion.
As much as I think your info is quality, I think you should add some screenshots.
If anyone's like me I hate reading massive paragraphs of instructions.
Remember - A picture can speak 1000 words
Thanks though.
Dear hasoon2000
Nice tutorial.. help me alot thx..
worked very fine for me, thanks a lot !! :good:
Is it working with Jelly Beam? And will i be able to get OTA updates after?
Thanx
Sent from my HTC One X using xda app-developers app
OTA
uguaanga said:
Is it working with Jelly Beam? And will i be able to get OTA updates after?
Thanx
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
You won't be able to get official OTA updates after you have flashed a custom rom.
My experience is that even rooting is tricky for official Firmware upgrades.
Even tough there are some ROM's on XDA that have OTA support!
Thanks! Works fine for me!
When you say THIS WILL WIPE ALL YOUR DATA FROM THE PHONE in post 1, does that include sdcard data, photos, music etc?
Since USB mass storage is not available, I've tried using android file transfer to backup my files before unlocking boot loader. Its not working though. Any way to do this?
Sent from my HTC One X using xda premium
nevermind
When acquainted with my HTC this thread helped me. thanks
Htc one x stuck on htc one logo
please help meee
i have an htc one x running jelly bean 4.1.1 and i rooted it ...everything worked finee ... until i installed an app from the play store called font installer after i installed it i changed the font and installed the font ... the notification bar was gone ... i was able to use the device but without the notification bar so i turned it off and on again ... and i get stuck on the htc one logo ... PLEASE ANYONEEE PLEASE HELP MEE ... did i brick the device or what?? pleasee again hellpp and thank you
Nice guide. Thanks.:victory:
Hey all,
So, my smart self was attempting to flash Marshmallow 6.0 from 4.3 (rooted)...I did the same thing that was here on this THREAD and now my tab can only go into TWRP, but there's no OS installed because I wiped (and didn't make a darn backup....), but there are a few differences from the thread I referred to:
- I can get into my Bootloader
- I can get into TWRP
- I have the current TWRP 2.8.7
- I've tried the Nexus Toolkit from HERE, my device serial is recognized, but it states that I'm offline
- Because I'm offline, I can't push any files to my device through the tool
- When I'm in TWRP, my computer will recognize my tablet and I can actually get into folders and what not, but I can't copy/paste any files to flash within TWRP and I get an error
- Anytime I power down or reboot within TWRP, it tells me that I have No OS installed
- I can't use ADB (as far as I know) because my device shows that it's offline
Is there any hope that I can recover even back to 4.3?
Any guidance would really be appreciated. I have to step away because I'm frustrated and am angry at myself that I didn't make a nandroid.
Thanks in advance.
kevs888 said:
Hey all,
So, my smart self was attempting to flash Marshmallow 6.0 from 4.3 (rooted)...I did the same thing that was here on this THREAD and now my tab can only go into TWRP, but there's no OS installed because I wiped (and didn't make a darn backup....), but there are a few differences from the thread I referred to:
- I can get into my Bootloader
- I can get into TWRP
- I have the current TWRP 2.8.7
- I've tried the Nexus Toolkit from HERE, my device serial is recognized, but it states that I'm offline
- Because I'm offline, I can't push any files to my device through the tool
- When I'm in TWRP, my computer will recognize my tablet and I can actually get into folders and what not, but I can't copy/paste any files to flash within TWRP and I get an error
- Anytime I power down or reboot within TWRP, it tells me that I have No OS installed
- I can't use ADB (as far as I know) because my device shows that it's offline
Is there any hope that I can recover even back to 4.3?
Any guidance would really be appreciated. I have to step away because I'm frustrated and am angry at myself that I didn't make a nandroid.
Thanks in advance.
Click to expand...
Click to collapse
Are you using stock rom? Because if you are, I wouldn't even try. What with the widespread knowledge that stock might brick, some people insist on it. Otherwise, if you can get to the bootloader:
(1) Make sure it's unlocked (if you're not familiar, connect tab to PC, make sure fastboot works, then enter "fastboot oem unlocked" without the quotes then follow instructions on your tab);
(2) Flash bootloader 4.05 if you haven't already;
(3) Get a USB OTG thumb drive (you might need an OTG adapter for this); and download a Marshmallow-based custom rom in the Android Development section;
(4) Get into TWRP and mount USB OTG. You should see all the files on your thumb drive;
(5) Copy all data you care about to your PC;
(6) Wipe everything except USB OTG twice. Then go to Format and do it twice too. If yours is 32GB, it will take a while (30 Mins average depending on how much data);
(7) Flash rom, then Gapps.
You should be able to boot after that. Good luck.
(4)
graphdarnell said:
Are you using stock rom? Because if you are, I wouldn't even try. What with the widespread knowledge that stock might brick, some people insist on it. Otherwise, if you can get to the bootloader:
(1) Make sure it's unlocked (if you're not familiar, connect tab to PC, make sure fastboot works, then enter "fastboot oem unlocked" without the quotes then follow instructions on your tab);
(2) Flash bootloader 4.05 if you haven't already;
(3) Get a USB OTG thumb drive (you might need an OTG adapter for this); and download a Marshmallow-based custom rom in the Android Development section;
(4) Get into TWRP and mount USB OTG. You should see all the files on your thumb drive;
(5) Copy all data you care about to your PC;
(6) Wipe everything except USB OTG twice. Then go to Format and do it twice too. If yours is 32GB, it will take a while (30 Mins average depending on how much data);
(7) Flash rom, then Gapps.
You should be able to boot after that. Good luck.
(4)
Click to expand...
Click to collapse
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
kevs888 said:
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
Click to expand...
Click to collapse
It shouldn't make a difference what rom you flash now so long as you wipe and format everything inside TWRP. But you must make sure you have bootloader 4.05. 4.02 will not allow you to flash LL or MM successfully, and the system does not upgrade on its own no matter what rom you're flashing now.
Since you said you couldn't get TWRP to copy anything, I suggested that you use a thumb drive. Basically, if you turn the tab totally off, hold power + volume down for a few seconds, it should take you to the fastboot page (pic). Look to see what bootloader version you have there.
From here, you can basically flash anything. I recommended that you wipe and format first with TWRP because it happened to me a few times when for some reason, wiping alone still left some residual data that interfered with flashing newer roms.
Stay away from anything stock for the moment. God knows it has bricked more than a few devices. Download SkipsoftToolKit and flash from the fastboot page if you want an automated process. It has worked wonderfully in my experience. Ask if you have more questions. Have fun.
kevs888 said:
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
Click to expand...
Click to collapse
Fastboot page
graphdarnell said:
It shouldn't make a difference what rom you flash now so long as you wipe and format everything inside TWRP. But you must make sure you have bootloader 4.05. 4.02 will not allow you to flash LL or MM successfully, and the system does not upgrade on its own no matter what rom you're flashing now.
Since you said you couldn't get TWRP to copy anything, I suggested that you use a thumb drive. Basically, if you turn the tab totally off, hold power + volume down for a few seconds, it should take you to the fastboot page (pic). Look to see what bootloader version you have there.
From here, you can basically flash anything. I recommended that you wipe and format first with TWRP because it happened to me a few times when for some reason, wiping alone still left some residual data that interfered with flashing newer roms.
Stay away from anything stock for the moment. God knows it has bricked more than a few devices. Download SkipsoftToolKit and flash from the fastboot page if you want an automated process. It has worked wonderfully in my experience. Ask if you have more questions. Have fun.
Click to expand...
Click to collapse
This is really helpful...I think I'm almost there.
I'm on a super old Bootloader (see attachment) so I'll need to update. I downloaded the update from this XDA Thread
More questions:
- Would I be able to push the 4.05 bootloader update and custom whatever Marshmallow ROM via the toolkit instead of from a USB OTG?
- If I was rooted on 4.3, am I still rooted so that I would be able to flash the custom ROM? I don't want to risk doing further damage, lol.
- I'm not home at the moment, so I can't test this out -- I'm thinking I couldn't put anything into my tablet last night because it was running TWRP and I didn't have it on the Fastboot screen. Would being in the Fastboot screen possibly allow me to copy/paste the zip files into my tablet?
- If there's nothing I need to copy from the tablet, would I still need the USB OTG? Or could I just use the Toolkit to push everything into my tablet and flash via TWRP?
Based on your answers to the above would this be the correct order:
1. Push 4.05 bootloader update and custom ROM via toolkit to my tablet
2. Flash 4.05 bootloader update within TWRP
3. *Per your earlier advice* Wipe everything except USB OTG twice. Is this cache, dalvik, system, and data? Or literally there's an option for "wipe everything" (I don't remember what I saw)?
4. Then go to Format and do it twice, too. I have a 32GB, so I'm expecting it to take awhile for the format
5. Flash ROM, then Gapps. I don't have any apps I need to put back so much as I need an OS to load, so I can add later.
Thanks again for everything!
EDIT:
Okay, so I came home and was able to use the Toolkit to recognize the device in fastboot mode. However, I wasn't able to push anything into the phone because the Toolkit said that I needed to be booted into Android.
The last thing I saw when I was in TWRP poking around was that I saw that I could install .zip files from USB OTG. Are either of these alright for me to connect my flash drive to and be recognized inside TWRP?
Example 1
Example 2
kevs888 said:
This is really helpful...I think I'm almost there.
I'm on a super old Bootloader (see attachment) so I'll need to update. I downloaded the update from this XDA Thread
More questions:
- Would I be able to push the 4.05 bootloader update and custom whatever Marshmallow ROM via the toolkit instead of from a USB OTG?
- If I was rooted on 4.3, am I still rooted so that I would be able to flash the custom ROM? I don't want to risk doing further damage, lol.
- I'm not home at the moment, so I can't test this out -- I'm thinking I couldn't put anything into my tablet last night because it was running TWRP and I didn't have it on the Fastboot screen. Would being in the Fastboot screen possibly allow me to copy/paste the zip files into my tablet?
- If there's nothing I need to copy from the tablet, would I still need the USB OTG? Or could I just use the Toolkit to push everything into my tablet and flash via TWRP?
Based on your answers to the above would this be the correct order:
1. Push 4.05 bootloader update and custom ROM via toolkit to my tablet
2. Flash 4.05 bootloader update within TWRP
3. *Per your earlier advice* Wipe everything except USB OTG twice. Is this cache, dalvik, system, and data? Or literally there's an option for "wipe everything" (I don't remember what I saw)?
4. Then go to Format and do it twice, too. I have a 32GB, so I'm expecting it to take awhile for the format
5. Flash ROM, then Gapps. I don't have any apps I need to put back so much as I need an OS to load, so I can add later.
Thanks again for everything!
EDIT:
Okay, so I came home and was able to use the Toolkit to recognize the device in fastboot mode. However, I wasn't able to push anything into the phone because the Toolkit said that I needed to be booted into Android.
The last thing I saw when I was in TWRP poking around was that I saw that I could install .zip files from USB OTG. Are either of these alright for me to connect my flash drive to and be recognized inside TWRP?
Example 1
Example 2
Click to expand...
Click to collapse
If you're comfortable using the ToolKit, you don't need an OTG cable. Connect your tab to PC, fire up ToolKit, complete all the prelim BS, then flash the bootloader from TK. Do not use TWRP for this. To do this, open the ToolKit folder in drive C:, locate the folder therein for zips, place the zip files (4.05 bootloader; TWRP; or custom roms) in there, and start to install. I am talking off the top of my head. But give me a few minutes to check the Kit again, and I'll give specific instructions. Bear with me, as I'm on Linux at the moment and therefore cannot start ToolKit (which is in Windows).
Things to do in order:
1. Download bootloader 4.05 (flashable zip HERE); and custom rom of your choice (zip format)
2. Locate the Unified Android ToolKit on drive C: on your PC and open it;
3. Locate the folder “put zip file to sideload here” → “Nexus 7 2013” then paste
bootloader zip and Rom zip in there;
4. Fire up Toolkit with tab connected; complete all the prelim questions;
5. Follow all the steps to install TWR 2870 (pic 8, choice 6);
6. Go to TWRP, wipe and format.
7. Go back to TWRP main page → “Advanced” → “ADB sideload”;
8 Go to ToolKit (pic 8) enter choice 16 (Look at the pics that follow for the correct choices) to
sideload Bootloader;
9. Flash Bootloader.
10. Go back to TWRP main page → Reboot → Bootloader. Once there check bootloader version 4.05;
11. Get into TWRP to sideload Rom; flash it.
graphdarnell said:
Things to do in order:
1. Download bootloader 4.05 (flashable zip HERE); and custom rom of your choice (zip format)
2. Locate the Unified Android ToolKit on drive C: on your PC and open it;
3. Locate the folder “put zip file to sideload here” → “Nexus 7 2013” then paste
bootloader zip and Rom zip in there;
4. Fire up Toolkit with tab connected; complete all the prelim questions;
5. Follow all the steps to install TWR 2870 (pic 8, choice 6);
6. Go to TWRP, wipe and format.
7. Go back to TWRP main page → “Advanced” → “ADB sideload”;
8 Go to ToolKit (pic 8) enter choice 16 (Look at the pics that follow for the correct choices) to
sideload Bootloader;
9. Flash Bootloader.
10. Go back to TWRP main page → Reboot → Bootloader. Once there check bootloader version 4.05;
11. Get into TWRP to sideload Rom; flash it.
Click to expand...
Click to collapse
Wow, this is awesome. Thank you so much.
I had already flashed TWRP 2870 before I wiped the OS, but I figured I'd try again using the Toolkit, but I got an error. I stopped here just in case.
Earlier, I tried flashing the zip for the bootloader the same way you just instructed, but my serial number turned into question marks?
Please see attachments. My pics are on the right side of the comparisons and I blacked out some of my serial number just in case for the TWRP pic.
Thanks again for the continued support!
kevs888 said:
Wow, this is awesome. Thank you so much.
I had already flashed TWRP 2870 before I wiped the OS, but I figured I'd try again using the Toolkit, but I got an error. I stopped here just in case.
Earlier, I tried flashing the zip for the bootloader the same way you just instructed, but my serial number turned into question marks?
Please see attachments. My pics are on the right side of the comparisons and I blacked out some of my serial number just in case for the TWRP pic.
Thanks again for the continued support!
Click to expand...
Click to collapse
Ok. One step at a time. Since you don't have an OS installed, ToolKit cannot complete the process of sideloading because it normally would have to use ADB from within the OS (which is absent) to restart the tab into recovery mode (TWRP). But if you're already in sideload mode within TWRP, it would detect it and transfer the file over to your tab. Let's go back.
(1) Fire up ToolKit (TK), go to sideload step, type the file name and stop. Get to fastboot page on your tab. Go back to TK and hit enter. TK should detect fastboot mode, download TWRP 2.7.1.1, take the tab into TWRP, tell you to go to sideload mode. Thereafter, it should detect this mode and transfer the file over. Then TWRP would flash the bootloader 4.05 automatically. If successful, sideload the rom the same way to flash it. Then upgrade TWRP back to 2870 with TK.
(2) Failing the above (because TWRP somehow doesn't function correctly), put the tab in fastboot mode, go to TK and follow the steps to flash TWRP anew. TK should detect fastboot and begin to flash the recovery. That done, go back and restart (1) above.
(3) If that still doesn't work, we have to resort to fastboot.exe and do it by command lines. But that's far ahead. Try the above first. We'll cross that bridge if we get to it.
I can send you an automated package that would upgrade the bootloader to 4.04 that I downloaded a year ago from Scott's Roms (thanks to him). It's good enough for Lollipop 5.1. The file is about 4MB and I'm not sure how we can do this through XDA. But if we ever get there, I'm certain we'll find a way. And smile, it's only a lousy tab.
graphdarnell said:
Ok. One step at a time. Since you don't have an OS installed, ToolKit cannot complete the process of sideloading because it normally would have to use ADB from within the OS (which is absent) to restart the tab into recovery mode (TWRP). But if you're already in sideload mode within TWRP, it would detect it and transfer the file over to your tab. Let's go back.
(1) Fire up ToolKit (TK), go to sideload step, type the file name and stop. Get to fastboot page on your tab. Go back to TK and hit enter. TK should detect fastboot mode, download TWRP 2.7.1.1, take the tab into TWRP, tell you to go to sideload mode. Thereafter, it should detect this mode and transfer the file over. Then TWRP would flash the bootloader 4.05 automatically. If successful, sideload the rom the same way to flash it. Then upgrade TWRP back to 2870 with TK.
(2) Failing the above (because TWRP somehow doesn't function correctly), put the tab in fastboot mode, go to TK and follow the steps to flash TWRP anew. TK should detect fastboot and begin to flash the recovery. That done, go back and restart (1) above.
(3) If that still doesn't work, we have to resort to fastboot.exe and do it by command lines. But that's far ahead. Try the above first. We'll cross that bridge if we get to it.
I can send you an automated package that would upgrade the bootloader to 4.04 that I downloaded a year ago from Scott's Roms (thanks to him). It's good enough for Lollipop 5.1. The file is about 4MB and I'm not sure how we can do this through XDA. But if we ever get there, I'm certain we'll find a way. And smile, it's only a lousy tab.
Click to expand...
Click to collapse
Let me just say, I'm so thankful for your help in all of this. Seriously. Thank you.
I kept on tinkering with the ToolKit and Fastboot kept on stopping everytime I switched to TWRP. I got to the point where TWRP showed 2.7.1 but the ADB Sideload kept getting stuck at the "Starting Sideload" prompt.
I went out and bought a $3 OTB USG cable and figured I'd give it a go since this sounded easier (theoretically). At first, I couldn't understand why the OTG wasn't recognized within TWRP. Then, I realized I needed to mount it within TWRP.
Once it mounted, I wiped and flashed the 4.05 bootloader zip. Success.
I went back into the Fastboot screen to verify 4.05. Success.
Went back into TWRP 2.8.7 and flashed a 6.0 ROM from these boards. Success.
Flashed Gapps. Success.
Rebooted. I'm now running a custom Marshmallow ROM and it runs so smoothly now.
Seriously. Thank you.
kevs888 said:
Let me just say, I'm so thankful for your help in all of this. Seriously. Thank you.
I kept on tinkering with the ToolKit and Fastboot kept on stopping everytime I switched to TWRP. I got to the point where TWRP showed 2.7.1 but the ADB Sideload kept getting stuck at the "Starting Sideload" prompt.
I went out and bought a $3 OTB USG cable and figured I'd give it a go since this sounded easier (theoretically). At first, I couldn't understand why the OTG wasn't recognized within TWRP. Then, I realized I needed to mount it within TWRP.
Once it mounted, I wiped and flashed the 4.05 bootloader zip. Success.
I went back into the Fastboot screen to verify 4.05. Success.
Went back into TWRP 2.8.7 and flashed a 6.0 ROM from these boards. Success.
Flashed Gapps. Success.
Rebooted. I'm now running a custom Marshmallow ROM and it runs so smoothly now.
Seriously. Thank you.
Click to expand...
Click to collapse
I'm glad you got it working again. Sorry you had to make a trip to the store. You should've waited for KT to switch the tab to TWRP 2711 for you. But it was not a waste of time anyway.