ROM REMOD V2R G3 Look Alike E980 - LG Optimus G Pro

This is REMOD V2R G3 based off SphinX PRO V2.0 is was getting boot loops with the original Rom(http://lgviet.com/forum/threads/rom...-port-cho-gpro-f240l-fake-giao-dien-g3.24062/) so I took the E980 files from SphinX V2.0 and added the to one zip, DON'T KNOW IF IT WILL WORK ON OTHER MODELS[/
PLEASE READ BEFORE FLASHING- THIS IS FOR E980
Am using Cm-6.0.4.5 without any problems(http://www.mediafire.com/download/rrslaf7yynb0bsi/CWM-6.0.4.5-Recovery.zip)
Always do a backup for safe keeping
Wipe Data/Factory Reset
Flash Rom
Wipe Cache & Dalvik
Reboot System i think it asks something about Superuser Select Yes
Boot up takes awhile, so relax
Link- https://drive.google.com/file/d/0Bz0uff7h6sPxVGxmd1ExSWdaR1E/edit?usp=sharing
Thanks to the guys over at lgviet.com
PLEASE READ BEFORE FLASHING- THIS IS FOR E980
Bugs
In call speaker Doesn't Work, am trying to figure out what files is needed

Thank you, but Perhaps you should fix the in call speaker begore posting it
Sent from my LG-E988 using XDA Free mobile app

I flashed the LG viet version along with the patch, but i removed the recovery image from the rom before installing. The phone booted but it did not recognize my sd car. Tried booting into recovery and phone got stuck on LG logo. Tried using tot to go back to stock, lg flashtools didn't recognize my phone. had to install panama KDZ to revive my phone.

marcini said:
Thank you, but Perhaps you should fix the in call speaker begore posting it
Sent from my LG-E988 using XDA Free mobile app
Click to expand...
Click to collapse
am not a dev so iT will take some trail and error will upload for those who want to use it :good:

sorry for a noob question here. any lg g3 setting UI included in this ROM? eagerly to see this ported.

johnclarkson said:
sorry for a noob question here. any lg g3 setting UI included in this ROM? eagerly to see this ported.
Click to expand...
Click to collapse
yes

ki11aprime said:
This is REMOD V2R G3 based off SphinX PRO V2.0 is was getting boot loops with the original Rom(http://lgviet.com/forum/threads/rom...-port-cho-gpro-f240l-fake-giao-dien-g3.24062/) so I took the E980 files from SphinX V2.0 and added the to one zip, DON'T KNOW IF IT WILL WORK ON OTHER MODELS[/
PLEASE READ BEFORE FLASHING- THIS IS FOR E980
Am using Cm-6.0.4.5 without any problems(http://www.mediafire.com/download/rrslaf7yynb0bsi/CWM-6.0.4.5-Recovery.zip)
Always do a backup for safe keeping
Wipe Data/Factory Reset
Flash Rom
Wipe Cache & Dalvik
Reboot System i think it asks something about Superuser Select Yes
Boot up takes awhile, so relax
Link- https://drive.google.com/file/d/0Bz0uff7h6sPxVGxmd1ExSWdaR1E/edit?usp=sharing
Thanks to the guys over at lgviet.com
PLEASE READ BEFORE FLASHING- THIS IS FOR E980
Bugs
In call speaker Doesn't Work, am trying to figure out what files is needed
Click to expand...
Click to collapse
what does that Multitasking feature menu i am seeing on the screenshot do?

Tambuyeye said:
what does that Multitasking feature menu i am seeing on the screenshot do?
Click to expand...
Click to collapse
Slide aside and multi window

Looks awesome been waiting for this. Ty
Sent from my LG-E980 using XDA Free mobile app

..
---------- Post added at 02:07 AM ---------- Previous post was at 02:05 AM ----------
ki11aprime said:
Slide aside and multi window
Click to expand...
Click to collapse
OK thanks for quick reply. I'm gonna flash tonight and see what awesomeness maybe awaiting me!
Sent from my LG-E980 using XDA Premium 4 mobile app

The LGVIET rom also had a patch for the e980 which we are supposed to flash after flashing the main rom. did you do anything with the patch?

Tambuyeye said:
what does that Multitasking feature menu i am seeing on the screenshot do?
Click to expand...
Click to collapse
ok flashed and its not looking bad. as u stated in call speaker phone not working. i cant get my multiwindow to work. options are turned on but when i try to activate it my screen only quints like its trying to launch but crashing. some assistance please....thank you.
---------- Post added at 07:43 AM ---------- Previous post was at 07:40 AM ----------
Tambuyeye said:
what does that Multitasking feature menu i am seeing on the screenshot do?
Click to expand...
Click to collapse
Tambuyeye said:
ok flashed and its not looking bad. as u stated in call speaker phone not working. i cant get my multiwindow to work. options are turned on but when i try to activate it my screen only quints like its trying to launch but crashing. some assistance please....thank you.
Click to expand...
Click to collapse
ki11aprime said:
This is REMOD V2R G3 based off SphinX PRO V2.0 is was getting boot loops with the original Rom(http://lgviet.com/forum/threads/rom...-port-cho-gpro-f240l-fake-giao-dien-g3.24062/) so I took the E980 files from SphinX V2.0 and added the to one zip, DON'T KNOW IF IT WILL WORK ON OTHER MODELS[/
PLEASE READ BEFORE FLASHING- THIS IS FOR E980
Am using Cm-6.0.4.5 without any problems(http://www.mediafire.com/download/rrslaf7yynb0bsi/CWM-6.0.4.5-Recovery.zip)
Always do a backup for safe keeping
Wipe Data/Factory Reset
Flash Rom
Wipe Cache & Dalvik
Reboot System i think it asks something about Superuser Select Yes
Boot up takes awhile, so relax
Link- https://drive.google.com/file/d/0Bz0uff7h6sPxVGxmd1ExSWdaR1E/edit?usp=sharing
Thanks to the guys over at lgviet.com
PLEASE READ BEFORE FLASHING- THIS IS FOR E980
Bugs
In call speaker Doesn't Work, am trying to figure out what files is needed
Click to expand...
Click to collapse
ok flashed and its not looking bad. as u stated in call speaker phone not working. i cant get my multiwindow to work. options are turned on but when i try to activate it my screen only quints like its trying to launch but crashing. some assistance please....thank you.

Tambuyeye said:
ok flashed and its not looking bad. as u stated in call speaker phone not working. i cant get my multiwindow to work. options are turned on but when i try to activate it my screen only quints like its trying to launch but crashing. some assistance please....thank you.
---------- Post added at 07:43 AM ---------- Previous post was at 07:40 AM ----------
ok flashed and its not looking bad. as u stated in call speaker phone not working. i cant get my multiwindow to work. options are turned on but when i try to activate it my screen only quints like its trying to launch but crashing. some assistance please....thank you.
Click to expand...
Click to collapse
ok nevermind i sorted that out. thank you.

luisoman2000 said:
The LGVIET rom also had a patch for the e980 which we are supposed to flash after flashing the main rom. did you do anything with the patch?
Click to expand...
Click to collapse
normally i don't flash patches, but ill download it to see whats there to avoid bricking

ki11aprime said:
normally i don't flash patches, but ill download it to see whats there to avoid bricking
Click to expand...
Click to collapse
I'm really liking what you have done with this rom. No bootloops, no bricks, recovery works as it should. Viperfx won't work with this rom but the sony apps make up for it nicely. I don't mind not having a loudspeaker for calls, got used to it with the other sphinx roms and i rarely use the feature much. Great work man.

ki11aprime said:
This is REMOD V2R G3 based off SphinX PRO V2.0 is was getting boot loops with the original Rom(http://lgviet.com/forum/threads/rom...-port-cho-gpro-f240l-fake-giao-dien-g3.24062/) so I took the E980 files from SphinX V2.0 and added the to one zip, DON'T KNOW IF IT WILL WORK ON OTHER MODELS[/
PLEASE READ BEFORE FLASHING- THIS IS FOR E980
Am using Cm-6.0.4.5 without any problems(http://www.mediafire.com/download/rrslaf7yynb0bsi/CWM-6.0.4.5-Recovery.zip)
Always do a backup for safe keeping
Wipe Data/Factory Reset
Flash Rom
Wipe Cache & Dalvik
Reboot System i think it asks something about Superuser Select Yes
Boot up takes awhile, so relax
Link- https://drive.google.com/file/d/0Bz0uff7h6sPxVGxmd1ExSWdaR1E/edit?usp=sharing
Thanks to the guys over at lgviet.com
PLEASE READ BEFORE FLASHING- THIS IS FOR E980
Bugs
In call speaker Doesn't Work, am trying to figure out what files is needed
Click to expand...
Click to collapse
how do i clean up my notification bar???? id like to remove that data counter and put the clock back to the right hand corner please.
thank you.

know how u feel
went thru samething it took me three days to figure it out I read I had to use a windows 7 labtop and not windows 8 and it finally worked I was about to buy a new phone glad it worked gessshhhh lol I flashed the tot
luisoman2000 said:
I flashed the LG viet version along with the patch, but i removed the recovery image from the rom before installing. The phone booted but it did not recognize my sd car. Tried booting into recovery and phone got stuck on LG logo. Tried using tot to go back to stock, lg flashtools didn't recognize my phone. had to install panama KDZ to revive my phone.
Click to expand...
Click to collapse

Speaker will never work this ROM is GX Base same as F3xx series E988 ROMS are same for E980 plus speaker phone works
Sent from my LG-E980 using Tapatalk

hi
Mervingio said:
Speaker will never work this ROM is GX Base same as F3xx series E988 ROMS are same for E980 plus speaker phone works
Sent from my LG-E980 using Tapatalk
Click to expand...
Click to collapse
Is there a
g3 rom with all working

lg-sony-htc-samsung-apple said:
Is there a
g3 rom with all working
Click to expand...
Click to collapse
Still looking

Related

Latest korean LG G2 F320K11a firmware new hide navbar feature

There is a new firmware out that I'm running on my F320 now. Its F320K11a completely stock. However its a update.zip flash, so you need to install recovery and then flash it. I have flashed this over a F320S and L Model no problems. So its safe to say it will work on all F320's make a CWM backup first and place in on your hard drive just incase.
Changes include now in the menu nav settings you can now high the menu buttons for most apps.
Source and download
Its a 2.1GB download
Thanks for that my friend,we do need some love for our korean variants also lol
The download is 1.9gb for me and the name file is F320_11A_CUSTOM_ROM.rar
I hope im not downloading a wrong one...
But is this a Stock update from LG Korea or a custom rom ?
Sent from my LG-F320K using XDA Premium 4 mobile app
wolfgart said:
But is this a Stock update from LG Korea or a custom rom ?
Sent from my LG-F320K using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes the korean model needs some love, really its the best version with a removable battery and mircosd support
Its not a custom rom, I've installed its stock carrier F32oK Olleh firmware 11A, it just installed like a custom rom as its not a KDZ but a update.zip
You need the CWM touch mod apk installer here to install it. You should make a cwm backup to an external source before flashing the update zip. And later factory reset if your coming from F320L or F320S to stop and errors.
Hendrickson said:
Its not a custom rom, I've installed its stock Olleh firmware 11A, it just installed like a custom rom as its not a KDZ but a update.zip
Click to expand...
Click to collapse
Greaaaat !!!!
I love so much Korean variant F320K. Is the best variant of others in the world !!!!
Sent from my LG-F320K using XDA Premium 4 mobile app
I already have the touch recover on the phone.Will i need to reinstall it again after the flashing?
woof123 said:
I already have the touch recover on the phone.Will i need to reinstall it again after the flashing?
Click to expand...
Click to collapse
Not sure, which recovery are you using? I can test for you. If I install it I loose my mircosd card paths and can access my sd.
Open recovery,its ok tho i did it already now i need to see how it goes lol
There was no need of a clean set up tho,it s an otan so its supposed to go above any firmware.No problems or errors so far and i kept all my files and setting intact.
guys , i 've installed .11a from TWRP recovery , this is fully compatible .
Use TWRP http://techerrata.com/browse/twrp2/g2kor
woof123 said:
Open recovery,its ok tho i did it already now i need to see how it goes lol
There was no need of a clean set up tho,it s an otan so its supposed to go above any firmware.No problems or errors so far and i kept all my files and setting intact.
Click to expand...
Click to collapse
Any tips on how you installed Open recovery? I tried to install it with the info here. When I reboot into recovery its a blank screen and if i connect a usb cable windows wants to format various drives
Looks like a nice feature but if the button's are hidden how do we go back or press menu ??
Hendrickson said:
Any tips on how you installed Open recovery? I tried to install it with the info here. When I reboot into recovery its a blank screen and if i connect a usb cable windows wants to format various drives
Click to expand...
Click to collapse
My friend its super easy i just used flashify....And i opened the file with the recovery image tab.Thats it it only took 2 sec max...
varunkumars said:
Looks like a nice feature but if the button's are hidden how do we go back or press menu ??
Click to expand...
Click to collapse
There is a little tab in the middle you click to bring up the menu again.....
woof123 said:
My friend its super easy i just used flashify....And i opened the file with the recovery image tab.Thats it it only took 2 sec max...
Click to expand...
Click to collapse
Also tried this and same result. My phone is a F320L originally, I take it yours is a F320K?
Hendrickson said:
There is a little tab in the middle you click to bring up the menu again.....
Also tried this and same result. My phone is a F320L originally, I take it yours is a F320K?
Click to expand...
Click to collapse
No Its the S model that its practicaly the same with L or so i think...Cause inside when i open the case it says F320s/l
custom rom
did anyone else notice the link to the flashable custom rom foe f320
http://optimusforums.com/threads/first-custom-rom-for-lg-g2-f320.9029/
I am going to try it.
This rom is older than this one tho...
woof123 said:
This rom is older than this one tho...
Click to expand...
Click to collapse
FYI there is a new leaked rom now 11c http://optimusforums.com/threads/new-firmware-f320k11c-update-zip-for-twrp-or-cwm.9146/unread
Hendrickson said:
FYI there is a new leaked rom now 11c http://optimusforums.com/threads/new-firmware-f320k11c-update-zip-for-twrp-or-cwm.9146/unread
Click to expand...
Click to collapse
Installed and running 11C on my F320K ...
wolfgart said:
Installed and running 11C on my F320K ...
Click to expand...
Click to collapse
Hi I am using G2 f320k however the firmwire was still 10M and try to update the stock rom through thr OTA but it can't. Are there any method to upgrade it ?
ericj said:
Hi I am using G2 f320k however the firmwire was still 10M and try to update the stock rom through thr OTA but it can't. Are there any method to upgrade it ?
Click to expand...
Click to collapse
The latest K11C firmware leaked release dated 24th of Sept. Its an update.zip within the rar file so flash via twrp or cwm and remember to wipe/factory reset to stop any errors. (Always backup too)
Mirror: Google docs https://docs.google.com/file/d/0BwkUUmb8s5kQQnZ2STJWNWJzc0k/edit?usp=sharing

[ROM] Cyanogen Mod 10.2

I have not personally tried to flash this file but i did some digging to find out and it seems as if this is the unofficial cyanogen mod release for the ls980. i personally am not a big cyanogen mod fan so I wont be flashing this but if someone is a fan and wants to give it a shot you can let the others know how it worked for you.
as with any rom please make sure you create a NAND before you attempt to flash anything
As before I am not the creator of this rom or of any programs I post I am simply finding the information for you guys. I have not tested this ROM so i can not confirm that it is working. Flashing this ROM could brick your phone yadda yadda.
Known issues
Auto rotate screen gets stuck in landscape
GPS won't lock on
Dl now... will post resulta shortly
THE SPRINT LG G2
stafly17 said:
Dl now... will post resulta shortly
THE SPRINT LG G2
Click to expand...
Click to collapse
awesome thanks
Flashing now!!!!
THE SPRINT LG G2
stafly17 said:
Flashing now!!!!
THE SPRINT LG G2
Click to expand...
Click to collapse
\o/
question
so. when i am wiping the phone to flash the zip file for cm10.2..... i use the wipe all method and its taking forever... is this normal?
its been stuck at formatting cashe using make_ext4fs function
any clue
stafly17 said:
so. when i am wiping the phone to flash the zip file for cm10.2..... i use the wipe all method and its taking forever... is this normal?
its been stuck at formatting cashe using make_ext4fs function
any clue
Click to expand...
Click to collapse
im not 100% sure but i did find this http://forum.xda-developers.com/showpost.php?p=45918007&postcount=61
and this http://forum.xda-developers.com/showpost.php?p=46028807&postcount=86
and here is the fix http://forum.xda-developers.com/showpost.php?p=46020723&postcount=4
Univsoldur said:
im not 100% sure but i did find this http://forum.xda-developers.com/showpost.php?p=45918007&postcount=61
and this http://forum.xda-developers.com/showpost.php?p=46028807&postcount=86
and here is the fix http://forum.xda-developers.com/showpost.php?p=46020723&postcount=4
Click to expand...
Click to collapse
I guess we have to flash gapps as well right?
jcaicedo82 said:
I guess we have to flash gapps as well right?
Click to expand...
Click to collapse
i believe so cwm i dont believe comes with gapps ever just please be sure you guys create a nand like i said i have not tried to flash this rom and i dont know what the hang ups might be ill see if i can find the gapps package
should be 4.3gapps these but again i can not confirm flash at ur own risk etc http://goo.im/gapps/gapps-jb-20130813-signed.zip
Univsoldur said:
i believe so cwm i dont believe comes with gapps ever just please be sure you guys create a nand like i said i have not tried to flash this rom and i dont know what the hang ups might be ill see if i can find the gapps package
should be 4.3gapps these but again i can not confirm flash at ur own risk etc http://goo.im/gapps/gapps-jb-20130813-signed.zip
Click to expand...
Click to collapse
jcaicedo82 said:
I guess we have to flash gapps as well right?
Click to expand...
Click to collapse
Univsoldur said:
im not 100% sure but i did find this http://forum.xda-developers.com/showpost.php?p=45918007&postcount=61
and this http://forum.xda-developers.com/showpost.php?p=46028807&postcount=86
and here is the fix http://forum.xda-developers.com/showpost.php?p=46020723&postcount=4
Click to expand...
Click to collapse
so i tried that and it Fails, i will just let it sit with the regular...
AND YES WE NEED GAPPS! lol. i forgot about that.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO getting closer
Shweeeeet
Sent from my LG-LS980 using xda app-developers app
o0adam0o said:
Shweeeeet
Sent from my LG-LS980 using xda app-developers app
Click to expand...
Click to collapse
So far everything work, calls, data, mms, sms..the issue is GPs is not locking
stafly17 said:
so i tried that and it Fails, i will just let it sit with the regular...
AND YES WE NEED GAPPS! lol. i forgot about that.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO getting closer
Click to expand...
Click to collapse
did u ever get it to flash
stafly17 said:
so i tried that and it Fails, i will just let it sit with the regular...
AND YES WE NEED GAPPS! lol. i forgot about that.
OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO getting closer
Click to expand...
Click to collapse
jcaicedo82 said:
I guess we have to flash gapps as well right?
Click to expand...
Click to collapse
Guys the gapps should be the same for all variants of CM 10.2 including the Verizon, Tmobile and ATT version. There is nothing specific about those gapps that are carrier specific.
I am sure if you go to the Verizon, ATT or Tmobile development pages you can find out which gapps they are using for CM 10.2 and use the same one.
ericdabbs said:
Guys the gapps should be the same for all variants of CM 10.2 including the Verizon, Tmobile and ATT version. There is nothing specific about those gapps that are carrier specific.
I am sure if you go to the Verizon, ATT or Tmobile development pages you can find out which gapps they are using for CM 10.2 and use the same one.
Click to expand...
Click to collapse
they are using 4.3 i already looked it up thats how i found that gapps package
yeah so i got it flashed as as said before everything works except GPS. Im flashing back to lock my gps and then ill flash back and see what happens... will report asap\
Yea my rotation is messed up i flashed and flashed back bc no gapps. rotation would stay in landscape while holding it in portrait.
chris0160 said:
Yea my rotation is messed up i flashed and flashed back bc no gapps. rotation would stay in landscape while holding it in portrait.
Click to expand...
Click to collapse
I posted the gapps package. On the first page i think. Yea should be 4.3 gapps
Sent from my LG-LS980 using Tapatalk
Univsoldur said:
I posted the gapps package. On the first page i think. Yea should be 4.3 gapps
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Does this fix the ratoation issue and is there a fix for the GPS lock?
Fedtheincred said:
Does this fix the ratoation issue and is there a fix for the GPS lock?
Click to expand...
Click to collapse
It wont fix rotation and not gps either.
Sent from my LG-LS980 using Tapatalk

E980 doesn't go past Splash Screen after flash rom

So, I was looking at the thread for the Sphinx Mod and i decided to download v1.2.
I did a restore to stock V10k, rooted, installed cwm for freegee
Went into CWM and flashed the Sphinx zip first
Then flashed the patch for F240s and i read somewhere in that thread s patch worked
I successfully booted but then i did not have a signal so i though i needed to reflash baseband
So i did but now it does not boot up and only stays at the lg splash screen
I tried to restore back but it says the phone is now a different model
I tried using the LG mobile support tool to flash the kdz panama or telecel but i get an error
I need some assistance.
same here brother
---------- Post added at 04:06 AM ---------- Previous post was at 04:02 AM ----------
sorry u have to go through this i did exactly what u did the rom then the spatch now phone is a diff model cant flash back to stock like the times before, im glad its not just me hopefully someone can help us ive already made a thread but ur description is perfect of what I did.
overclocked636 said:
same here brother
---------- Post added at 04:06 AM ---------- Previous post was at 04:02 AM ----------
sorry u have to go through this i did exactly what u did the rom then the spatch now phone is a diff model cant flash back to stock like the times before, im glad its not me hopefully someone can help us ive already made a thread but u description is perfect of what I did.
Click to expand...
Click to collapse
Im trying to use the lg mobile support to to flash kdz of telecel but i cant click start upgrade
kdz of telecel what country is that will that work for me here in america and ive had no luck with lg mobile support tool lg flash tool has always worked before but now it says its a different model.
overclocked636 said:
kdz of telecel what country is that will that work for me here in america and ive had no luck with lg mobile support tool lg flash tool has always worked before but now it says its a different model.
Click to expand...
Click to collapse
I too live in America but i can only get up to the lg mobile support tool and nothing else happens
Hell i cant even get that far do you by chance have a link for where u got that tot
overclocked636 said:
Hell i cant even get that far do you by chance have a link for where u got that tot
Click to expand...
Click to collapse
lol i dont post much so i need 10 posts to give u the link
i got them from the storagecow
ya i had to make another account cause i guess i was inactive for to long. our phones will be fixed soon man the devs here are amazing.
overclocked636 said:
ya i had to make another account cause i guess i was inactive for to long. our phones will be fixed soon man the devs here are amazing.
Click to expand...
Click to collapse
just a question, do LG phones have the most problems compared to others like samsung, sony, motorola?
You both have e980?
Sent from my LG-E980 using XDA Premium 4 mobile app
i do and i believe he does as well
stulzerl said:
You both have e980?
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes we do, we both flashed the sphinx 1.2 and f240s patch
really hope we can get this resolved we both can get into download mode but thats it well atleast for me
overclocked636 said:
really hope we can get this resolved we both can get into download mode but thats it well atleast for me
Click to expand...
Click to collapse
u should try g or k instead of p tot to see if it works
happened to me too and saved it.
stanleylam24 said:
So, I was looking at the thread for the Sphinx Mod and i decided to download v1.2.
I did a restore to stock V10k, rooted, installed cwm for freegee
Went into CWM and flashed the Sphinx zip first
Then flashed the patch for F240s and i read somewhere in that thread s patch worked
I successfully booted but then i did not have a signal so i though i needed to reflash baseband
So i did but now it does not boot up and only stays at the lg splash screen
I tried to restore back but it says the phone is now a different model
I tried using the LG mobile support tool to flash the kdz panama or telecel but i get an error
I need some assistance.
Click to expand...
Click to collapse
If you can still get into recovery, wipe everything and format system. then flash without flashing baseband.(GET IT TO BOOT). charge it and then flash back to stock with lg flash tool. download the tot file for the E980. I hope this helps
ive tried g and it does the same thing havent tried the last one but assumed it wont matter
---------- Post added at 05:29 AM ---------- Previous post was at 05:27 AM ----------
idk about him but i can not get into recovery no matter how many times i try the words that are usually there in the top left are gone if i had a recovery i could flash the back up i have but with no recovery i cant
match
overclocked636 said:
really hope we can get this resolved we both can get into download mode but thats it well atleast for me
Click to expand...
Click to collapse
this is the DDL file that i have for my E980 and it reads: LGE980_20130314_LGFLASHv151. just wondering if it matches...
LGE980_20130314_LGFLASHv151 yes sir same dll here idk about him though.
For the instructions for the Sphinx mod, it said to do a 3 wipe which means dalvik cache and system
so i don't have the files anymore but i am able to get to recovery
have you....
overclocked636 said:
LGE980_20130314_LGFLASHv151 yes sir same dll here idk about him though.
Click to expand...
Click to collapse
have you tried:1) pulling the battery out
2) hold the power and volume button until hard reset menu apears.
3) if it does shows push the power button three times to get to recovery?(thats how i usually get to recovery).

[ROM][d802] Recovery Flashable STOCK 80220B Vodafone DE (+root)

Made this from the new 80220B Vodafone DE kdz.
This is the complete LG KK 20B ROM - nothing missing or messed with.
If you follow the method below exactly, no Audio glitches, no Touchscreen problems.
You can flash SuperSU and get root if you wish - your choice.
I provide this assuming you have an understanding of the terminology used below and appreciate that any flashing activity has some risk.
I strongly advise against using any form of restore from previous backups, such as TB or Nandroid.
Once the process is complete, custom recovery will be lost.
Method:
Download both the ROM zip file linked below and SuperSU zip file (if you want root) and copy to your SD card.
You need to be already on Rooted JB or PURE CM11 with either TWRP 2.6.3.3 or 2.6.3.4 or TWRP 2.7.0.0 (nothing else).
Reboot to TWRP recovery
Wipe: System, Data, Cache. Dalvik (nothing else)
Flash the ROM zip - ignore any "FAIL" warnings.
Wipe Cache and Dalvik (nothing else)
Go to the Mount page in TWRP and select System (leave the other defaults alone)
Flash the SuperSU zip - ignore any "FAIL" warnings
Reboot
Done
Don't use AutoRec to flash TWRP - you will lose Knock code.
Alternatively - if you have flashed TWRP on another KK Stock ROM (using AutoRec), you can full wipe (not SDCard) and flash this directly without going back to JB.
Download from here:
https://mega.co.nz/#!7EB0URZI!aYN6pBx9v7duPm2IaYFS0x_QEY89f0rhR66P9WP1EUc
Hey, you mentioned in this thread that you were going to upload a flashable ROM with knockcode.
Is this what you were talking about? You don't mention Knockcode in the OP. Also at the moment I'm running Stock Kitkat, rooted and with custom recovery. Do I just go into recovery and flash this? (Assuming I have the right TWRP and I wipe Cache and Davlik) You have said its okay to be on rooted JB, just wondering if being on rooted KK changes anything.
Yes this is the latest with Knock code. It would be fine to flash from any other KitKat ROM with custom recovery. Make sure you make the correct wipes.
You forgot download link!
Also PrimaryGPT.bin is partition table so may have issues with phone storage size after flash... I could be wrong and it could be fine...
Sent from my LG-D802 using Tapatalk
ephumuris said:
Yes this is the latest with Knock code. It would be fine to flash from any other KitKat ROM with custom recovery. Make sure you make the correct wipes.
You forgot download link!
Also PrimaryGPT.bin is partition table so may have issues with phone storage size after flash... I could be wrong and it could be fine...
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Download link on its way - uploading to G Drive this time not effing Mega.
I'm not testing this build - I don't want Voda bloat and 80220C Open is perfectly fine for me in all ways - I cannot for the life of me understand the hankering for Kock code.
Tried knock code and its awful...seems like its basically a pattern/number pin with invisible buttons...
Sent from my LG-D802 using Tapatalk
ephumuris said:
Tried knock code and its awful...seems like its basically a pattern/number pin with invisible buttons...
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Quite! lol
I did this on request from a couple of members.
Link now live
Thanks. Personally I like knock code. It is easier to unlock while driving. . What could those two binaries do?
If anyone has a Pioneering Spirit, or the necessary cajones to try it, please report back!
You are scaring me to try it.
PrimaryGPT.bin
is for the partition( 16gb or 32gb)
and it can be excluded from the rom
albsat said:
You are scaring me to try it.
Click to expand...
Click to collapse
well... of course the 2 additional .bin files could be excluded together or one by one... or left there.
Vodafone DE have both 16GB and 32GB variants, IIRC. Which may be why those files are there. So in theory it shouldn't matter if the whole ROM is flashed.
ROM wouldn't be stock if those files were removed.
Sent from my LG-D802 using Tapatalk
ephumuris said:
ROM wouldn't be stock if those files were removed.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Anyone who has flashed the kdz itself would have had the 2 files anyway, and it works.
Just need some feedback from those who have downloaded my flashable ROM and flashed in its entirety.
Hi, i have a stock 80220A and AutoRec installed. Do i need to go back to JB, or i can flash dirctly?
Sent from my LG-D802 using XDA Premium 4 mobile app
hristo2000 said:
Hi, i have a stock 80220A and AutoRec installed. Do i need to go back to JB, or i can flash dirctly?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This info is in the OP...
Wipe everything except SDCard and flash.
I will give this rom a try in the afternoon. I have a 32 gb version. Hope no bad surprises for Easter.
Hi flash this as per instruction from open. I was previously on cloudystock rom so all I did was install twrp recovery and then flash rom then flash supersu. ....Rom is running smooth on a UK d802. ... plus knock code is working as it should. But I don't particularly like it but it's working ..
Will run this rom for rest of day to see if any problems
Thanks
Sent from my LG-D802 using XDA Premium 4 mobile app
Been running rom for about 5 hours
Just installed myself too. So far so good... Later on I will report for issues, if any. Installed recovery as well... Thanks for the rom.
---------- Post added at 04:04 PM ---------- Previous post was at 03:33 PM ----------
I think I got my first issue. Double touch to waken the screen and knock code do not respond while I am charging. Don't know why.
leegreggs said:
Hi flash this as per instruction from open. I was previously on cloudystock rom so all I did was install twrp recovery and then flash rom then flash supersu. ....Rom is running smooth on a UK d802. ... plus knock code is working as it should. But I don't particularly like it but it's working ..
Will run this rom for rest of day to see if any problems
Thanks
Sent from my LG-D802 using XDA Premium 4 mobile app
Been running rom for about 5 hours
Click to expand...
Click to collapse
Thanks!
albsat said:
Just installed myself too. So far so good... Later on I will report for issues, if any. Installed recovery as well... Thanks for the rom.
---------- Post added at 04:04 PM ---------- Previous post was at 03:33 PM ----------
I think I got my first issue. Double touch to waken the screen and knock code do not respond while I am charging. Don't know why.
Click to expand...
Click to collapse
Thanks

[Q] Twrp on Lg G3 lollipop how

Hello. I have looked at the forum for how to install twrp on my Lg G3 D855 lollipop.
First I have rooted my phone withh this tool http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951, that worked fine now I read that I have to go to this http://forum.xda-developers.com/lg-g3/general/guide-update-to-lollipop-root-bumpd-twrp-t3048845 tread to install twrp, but I can't seams to figure this out.
1: Shuld I first unroot my phone and then use that other guide insted of the first one I used.
2: will the other guide then reset my phone so it will be like a new rom installation or what.
if some could clarify for me in "how to" install twrp on my phone or maby have a link where it already says how to.
SFMBE
I will try this, http://forum.xda-developers.com/showthread.php?t=3072767 seams to be the thing I looked fore, can any confirm this.
Thomaslje said:
Hello. I have looked at the forum for how to install twrp on my Lg G3 D855 lollipop.
First I have rooted my phone withh this tool http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951, that worked fine now I read that I have to go to this http://forum.xda-developers.com/lg-g3/general/guide-update-to-lollipop-root-bumpd-twrp-t3048845 tread to install twrp, but I can't seams to figure this out.
1: Shuld I first unroot my phone and then use that other guide insted of the first one I used.
2: will the other guide then reset my phone so it will be like a new rom installation or what.
if some could clarify for me in "how to" install twrp on my phone or maby have a link where it already says how to.
SFMBE
Click to expand...
Click to collapse
this is what I used
http://forum.xda-developers.com/showpost.php?p=59287063&postcount=1
BR7fan said:
this is what I used
http://forum.xda-developers.com/showpost.php?p=59287063&postcount=1
Click to expand...
Click to collapse
yes I have seen that but I dont know how to use this.
Will this reset my phone like a new rom or what, I tried the one i Linked earlier but that only gave me root but not the recovery, as what I can see when I try to enter recovery is says if I want to factory reset my phone and I was affraid to click yes there.
I'm also trying to figure out how to instal TWRP onto a LG G3 I'm coming from a LG G2 and it was a whole lot simple. So do I download the script onto my sd card then launch the exe from there? Thanks for the help!!
Thomaslje said:
yes I have seen that but I dont know how to use this.
Will this reset my phone like a new rom or what, I tried the one i Linked earlier but that only gave me root but not the recovery, as what I can see when I try to enter recovery is says if I want to factory reset my phone and I was affraid to click yes there.
Click to expand...
Click to collapse
it will only install recovery, it will not reset it like new. Its a very simple one click script.
Ok, I ran the one click that I linked and that seemed to install recovery, I didn't know how to enter it the correct way.
So I ran the script on my D852 all went good but when I try to boot into recovery mode by holding down button and power button all I get is red light blue light. Then pull the battery and it boots back into stock. Weird...does it hurt anything to try to run the script again?
Thanks for the help!
@beaver5963, seems like you missed something and got a secure boot error. It would be nice if you could provide more details. Did you get the correct kk firmware for your model? Appropriate custom recovery image (twrp)? Rest of the stuff looks quite automated... I used the previous version of imageprep btw.
Sent from my LG-D855 using Tapatalk
---------- Post added at 09:58 AM ---------- Previous post was at 09:21 AM ----------
[/COLOR @beaver5963, in case you do run the script again... It would be great if you log the messages produced.
Sent from my LG-D855 using Tapatalk
the link in OP's second post has worked like a charm for me.
also, just and fyi: http://forum.xda-developers.com/lg-g3/development/stock-t2961073 has up-to-date firmware releases
Hello Again,
So I downloaded a kitkat firmware for my d852 that came in TOT format. Does anyone have instructions on how to use the automatic script with a TOT file versus the KDZ file as it is different. Sorry for all the questions but I am just trying to learn all this stuff. Thanks for the help!
beaver5963 said:
Hello Again,
So I downloaded a kitkat firmware for my d852 that came in TOT format. Does anyone have instructions on how to use the automatic script with a TOT file versus the KDZ file as it is different. Sorry for all the questions but I am just trying to learn all this stuff. Thanks for the help!
Click to expand...
Click to collapse
@beaver5963, maybe you can look for a tot to kdz converter... Not sure if one exists.
Sent from my LG-D855 using Tapatalk
I got similar errors
ravi.vydianathan said:
@beaver5963, seems like you missed something and got a secure boot error. It would be nice if you could provide more details. Did you get the correct kk firmware for your model? Appropriate custom recovery image (twrp)? Rest of the stuff looks quite automated... I used the previous version of imageprep btw.
Sent from my LG-D855 using Tapatalk
---------- Post added at 09:58 AM ---------- Previous post was at 09:21 AM ----------
[/COLOR @beaver5963, in case you do run the script again... It would be great if you log the messages produced.
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
I also got red and blue lights when I tried to go into recovery and then got a boot configuration error. Anyway to fix this? I just updated to lollipop on verizon. If I can't get this to work, I'm going to say screw it.
...I guess you've tried https://play.google.com/store/apps/details?id=b007.autorecd855
currently for 855, 850, 852, ls990
Man are you kidding me? you resolved my problem with one link of an app? :highfive::highfive::highfive::highfive::highfive::highfive:
Miyagki said:
Man are you kidding me? you resolved my problem with one link of an app? :highfive::highfive::highfive::highfive::highfive::highfive:
Click to expand...
Click to collapse
haha...sad isn't it?
Gerhard.M said:
haha...sad isn't it?
Click to expand...
Click to collapse
rather beautiful than sad, isn't it ?
I guess you want me to put more complicated (more buttons etc? ) hehe
bender_007 said:
rather beautiful than sad, isn't it ?
I guess you want me to put more complicated (more buttons etc? ) hehe
Click to expand...
Click to collapse
complicated ?....missing the commodore era, sir? :laugh:
Gerhard.M said:
complicated ?....missing the commodore era, sir? :laugh:
Click to expand...
Click to collapse
Hehe, was asking because you said it's too simple
I hope you guys like it
bender_007 said:
Hehe, was asking because you said it's too simple
I hope you guys like it
Click to expand...
Click to collapse
....tnx but I don't use it.
btw never wrote 'simple'. However in the tangle of threads I apparently "helped" someone out, pointing a link. To me felt kinda sad, just like explaining what I meant........
have a nice day

Categories

Resources