Develop Bugs

[Q] Confused on my SM-T210

good day ladies and gentlemen.. i would like to ask about the cases that i have experienced on my SM-T210. i have installed a pre-rooted firmware right away on my SM-T210 to get the root previledges. therefore,i installed FieldRunners 2 games on my tab and i got stucked up on the loading screen when i finish the tutorial part. due to my curiousness, i tried it installing on my sister's galaxy duos and it worked like a charm. no problems at all. also i installed from play store Tech Deck Skateboarding game on my tab and i experienced glitchy graphic environment, again i tried it on my friend's generic and cheap tab. it did also worked like my sister's duos without a problem. i am really confused if the kernel from the pre-rooted firmware that i have flashed has to do with this issues occuring on my SM-T210. should i download a firmware from sammobile and flash it and root with "root unlocker pro"?? or what? please help me out guys.

nykie29 said:
good day ladies and gentlemen.. i would like to ask about the cases that i have experienced on my SM-T210. i have installed a pre-rooted firmware right away on my SM-T210 to get the root previledges. therefore,i installed FieldRunners 2 games on my tab and i got stucked up on the loading screen when i finish the tutorial part. due to my curiousness, i tried it installing on my sister's galaxy duos and it worked like a charm. no problems at all. also i installed from play store Tech Deck Skateboarding game on my tab and i experienced glitchy graphic environment, again i tried it on my friend's generic and cheap tab. it did also worked like my sister's duos without a problem. i am really confused if the kernel from the pre-rooted firmware that i have flashed has to do with this issues occuring on my SM-T210. should i download a firmware from sammobile and flash it and root with "root unlocker pro"?? or what? please help me out guys.
Click to expand...
Click to collapse
What you are experiencing has nothing to do with the pre-rooted firmware. It is the same firmware as stock, with the necessary root files added. The kernel isn't changed at all.
There have been several complaints about the graphic performance of this tab. It just doesn't seem to work well for some games.
Sent from my DROID RAZR MAXX HD

gr8nole said:
What you are experiencing has nothing to do with the pre-rooted firmware. It is the same firmware as stock, with the necessary root files added. The kernel isn't changed at all.
There have been several complaints about the graphic performance of this tab. It just doesn't seem to work well for some games.
Sent from my DROID RAZR MAXX HD
Click to expand...
Click to collapse
thank you sir for your answer, im glad that someone heard me and gave me clarification.. but one more thing sir, thus it mean that it is the tab itself that cant run a cheap/low end kind of game as of now? what im trying to say is that the problem is my SM-T210 itself and there's nothing more i can do to resolve it?

[Q]SM-T520 Rooted for Firewall but no Screen mirroring anymore :(

Hi there Guys
I´m total new on Android.Have my SM-T520 since two Weeks know.My last Boyfriend teached me alot into
the Computer-things.BtW, if you think Im writing stupid ... im from Germany LoL ... My english has
rotten a little bit. So sorry ... have merci please with me.
So ... I was told: Every Computer online needs a Firewall.I searched for an APP for my new Tablet ...
... found one, but it want´s a root? Searched for ROOT and find:
androidpulp.blogspot.de/2014/03/how-to-root-samsung-galaxy-tab-pro-101
I did everything exactly written ... was very nervous " should I? Or better not? Uhhh ... This WARNINGS
My new sweet Tablet! But I did it !! and it WORKS !!! My biggest Computer-thing I ever done. :laugh: :good:
So, I put this CF-Auto-Root-picassowifi-picassowifixx-smt520.tar.md5 File onto my Tablet.The "Root-Test"
was the installing of the AFWall+ Friewall ... It works! Great ! I rooted my Tab! Alone by myself !!
Told everyone from my Adventure the next Days.
But, I brought the Tab for relaxed surfing on my Sofa? (Couch?) and or streaming Movies from Sites to my
Samsung Smart TV.This SCREEN MIRRORING thing.I tested it a little BEFORE my rooting.I worked great.Now
it breaks up with a "Hardware Error" in the end of the connecting process.
So, searched again for that and found out that this Error came from the Root ... from the "Root-Counter",
I think? Searched again ... TRIANGLE AWAY app was found and installed.When I press RESET FLASH COUNTER
the app told me its resseting.But the counter dont go to zero ?? The last message told me
"... make sure you dont running a custom kernel ?? or custom recovery ..." ??
The TRIANGLE AWAY Flash Counter Status show to me:
Cuurent status:
Counter 1
Binary Custom
Device SM-t520
System Offical
When I put my Tab in this Download Mode? It says "ODIN Mode" itself?
ODIN MODE
PRODUCT NAME: SM-T520
CURRENT BINARY: Custom
SYSTEM STATUS: Offical
KNOX WARRENTY VOID: 1
AP SWREV: A1
I searched nearly a week ... landing a lot in this community here ... register on SAMMOBILE ...
thought that this File here is original:
sammobile.com/firmwares/3/?download=32752
Model: SM-T520
Model name: GALAXY TabPRO 10.1 Wi-Fi
Country: Germany
Version: Android 4.4.2
Changelist: 1977750
Build date: Tue, 24 Jun 2014 08:31:35 +0000
Product Code: DBT
PDA: T520XXUANF4
CSC: T520DBTANF1
MODEM: T520XXUANF4
But ... the File CF-Auto-Root-picassowifi ... was 21 MB big the File on SamMobile is 1,2 GB!! big.
I think I not right here.Im totaly confused now.Want to do this thing alone with no help from my Workmates.
It starts so good but now Im out of order.
ROM, Kernel, Firmware, Recovery ... all that I found with Google ?? I think I reached my Limit here.
SO, the Binary is the thing to do? Or ?? Is that a Kernel, ROM, Firmware or Recovery ??? This thing must be
original? Original to be able to reset the Counter to Zero and can do that SCREEN MIORRORING again?
My wish would be:
Keep the Root and the Firewall and also put the Counter to zero to be able to see the picture of my Tab on
my Samsung TV again.
PLEASE ... what kind of File do I need now?What I have to do with that?Is it possible to keep Firewall working
and ScreenMirroring?
Please does someone of you have a LINK that help me? What is a BINARY, please?
I THANK YOU all for reading my looong Story :good::good: Maybe someone knows what I have do do?
Greeting from Germany
Your Nina

too loong ? XD
Hmmmm .... to put it in short ...
Is it possible to have a rooted Tab AND use the
Samsung ScreenMirroring Funktion?
Please, how can I replace the custom BINARY with a stock Binary that
runs with my rooted system?
A Link or a good Searchword for Mrs.Google would help me so much.
Have a nice Evening
Greeting from Nina

AndroidNeuling said:
Hmmmm .... to put it in short ...
Is it possible to have a rooted Tab AND use the
Samsung ScreenMirroring Funktion?
Please, how can I replace the custom BINARY with a stock Binary that
runs with my rooted system?
A Link or a good Searchword for Mrs.Google would help me so much.
Have a nice Evening
Greeting from Nina
Click to expand...
Click to collapse
based on my experience with my other Smasung phones, yes it should work, as long as you are still running Stock firmware.

THANK YOU
xdm9mm said:
based on my experience with my other Smasung phones, yes it should work, as long as you are still running Stock firmware.
Click to expand...
Click to collapse
Thank you for your Answering
So,it may possible to keep root and firewall AND
use the screen-mirroring?
My problem is, what file do i need for that?
LoL ... I dont know the exactly name of and sadly l cant find out what kind of File?
A kernel, a firmware, a recovery or a rom?
I need a binary right? Or not?
What is a binary ... a rom kernel firmware or recovery?
I searched for hours now but cound find a Answer. :crying:
So, you mean I need a Firmware?
Please, do you have a Link? For the file and a how to do,maybe?
The Data is posted in my looong Story in my first post.
It starts so well and ended in a mission impossible for me now.
I thought someone here did it before with a sm-t520 10.0 pro tab.
Maybe ??
Have a Nice Day
your Nina

AndroidNeuling said:
Thank you for your Answering
So,it may possible to keep root and firewall AND
use the screen-mirroring?
My problem is, what file do i need for that?
LoL ... I dont know the exactly name of and sadly l cant find out what kind of File?
A kernel, a firmware, a recovery or a rom?
I need a binary right? Or not?
What is a binary ... a rom kernel firmware or recovery?
I searched for hours now but cound find a Answer. :crying:
So, you mean I need a Firmware?
Please, do you have a Link? For the file and a how to do,maybe?
The Data is posted in my looong Story in my first post.
It starts so well and ended in a mission impossible for me now.
I thought someone here did it before with a sm-t520 10.0 pro tab.
Maybe ??
Have a Nice Day
your Nina
Click to expand...
Click to collapse
1. Unfortunately, the Knox counter cannot be reset at this time.
2. If you have not installed any recovery, or other ROMs, Kernel, then you are running STOCK firmware.
3. Have you tried to reset your device and see if mirroring works? This is what I did with my S4 before and it worked, but I don't really know with the Tab pro because i have not rooted it as I want to use Knox.
4. If after you have reset your device, and screen mirroring does not work, try to download a STOCk firmware from www.samfirmware.com or www.samsung-updates.com and flash it to your device using ODIN - this is run on your COMPUTER with your Tab pro connected via USB cable. This will UNROOT your device. Then try to use screen mirroring again and see if it works. If screen mirroring works, then it means you can't root your devic if you want to use screen mirroring.
5. There are free firewalls on google play, but I have not used any of them so i cannot comment which one is the best.
I suggest before you make changes to your Tab Pro from now on, go and read more about rooting, flashing ROMs, flashing RECOVERY... it is best NOT to RUSH what you want to do as an ERROR on your part might cause more problems.

a lot of THANKS
xdm9mm said:
1. Unfortunately, the Knox counter cannot be reset at this time.
2. If you have not installed any recovery, or other ROMs, Kernel, then you are running STOCK firmware.
3. Have you tried to reset your device and see if mirroring works? This is what I did with my S4 before and it worked, but I don't really know with the Tab pro because i have not rooted it as I want to use Knox.
4. If after you have reset your device, and screen mirroring does not work, try to download a STOCk firmware from or and flash it to your device using ODIN - this is run on your COMPUTER with your Tab pro connected via USB cable. This will UNROOT your device. Then try to use screen mirroring again and see if it works. If screen mirroring works, then it means you can't root your devic if you want to use screen mirroring.
5. There are free firewalls on google play, but I have not used any of them so i cannot comment which one is the best.
I suggest before you make changes to your Tab Pro from now on, go and read more about rooting, flashing ROMs, flashing RECOVERY... it is best NOT to RUSH what you want to do as an ERROR on your part might cause more problems.
Click to expand...
Click to collapse
Thank you !
I will test that RESET with TriangleAway and then test ScreenMirroring this afternoon. Nice Idea :good: Hope it works.
I only put CF-Auto-Root-picassowifi-picassowifixx-smt520.tar.md5 one Time to my Tablet and it was the only
thing I put on with Odin.
My Problem with this Firmware-Download-Sites samfirmwar is, that my File:
Model: SM-T520 PDA: T520XXUANF4
(I cant put a Link in my Postings)
is too big!! It´s 1,2GB big and the File i did (CF-Auto-Root-picassowifi-picassowifixx-smt520.tar.md5) is only
21MB.Could that be right?? My only nonStock-File on my Tab is the BINARY, as TriangleAway and
the Download Page said.
I read a lot last two weeks ... i looked for me like theres no solution at that Time.
Couldn't find a Posting like "rooted SM-T520 WITH SreenMirroring"
Maybe my Tab its to new? Read from Lib-Files that must be changed but not for the SM-T520.
Thanks for your help !! I will test your Point 3 a little later. Hope ...
Have a nice Day
Greetz from Nina

AndroidNeuling said:
Thank you !
I will test that RESET with TriangleAway and then test ScreenMirroring this afternoon. Nice Idea :good: Hope it works.
I only put CF-Auto-Root-picassowifi-picassowifixx-smt520.tar.md5 one Time to my Tablet and it was the only
thing I put on with Odin.
My Problem with this Firmware-Download-Sites samfirmwar is, that my File:
Model: SM-T520 PDA: T520XXUANF4
(I cant put a Link in my Postings)
is too big!! It´s 1,2GB big and the File i did (CF-Auto-Root-picassowifi-picassowifixx-smt520.tar.md5) is only
21MB.Could that be right?? My only nonStock-File on my Tab is the BINARY, as TriangleAway and
the Download Page said.
I read a lot last two weeks ... i looked for me like theres no solution at that Time.
Couldn't find a Posting like "rooted SM-T520 WITH SreenMirroring"
Maybe my Tab its to new? Read from Lib-Files that must be changed but not for the SM-T520.
Thanks for your help !! I will test your Point 3 a little later. Hope ...
Have a nice Day
Greetz from Nina
Click to expand...
Click to collapse
Chainfire doesn't flash a new system. It replaces your recovery, then adds some files to root your existing /system, and then replaces your recovery with a stock version (which may be different than the stock version your started with, but is a Samsung recovery at least).
That's why it is so much smaller.
I'm guessing here because I have not entirely figured out what Samsung has done with their Digital Rights Management stack. But, screen mirroring may have issues because it may require DRM keys (probably hdcp keys) and by tripping Knox it may be going from DRM level 1 for which it has keys to DRM level 3 for which the device may not have usable keys.
I agree with the recommendation to try using Odin to undo everything except tripping the Knox counter. That's your best shot.

crpalmer said:
Chainfire doesn't flash a new system. It replaces your recovery, then adds some files to root your existing /system, and then replaces your recovery with a stock version (which may be different than the stock version your started with, but is a Samsung recovery at least).
That's why it is so much smaller.
I'm guessing here because I have not entirely figured out what Samsung has done with their Digital Rights Management stack. But, screen mirroring may have issues because it may require DRM keys (probably hdcp keys) and by tripping Knox it may be going from DRM level 1 for which it has keys to DRM level 3 for which the device may not have usable keys.
I agree with the recommendation to try using Odin to undo everything except tripping the Knox counter. That's your best shot.
Click to expand...
Click to collapse
LoL
Sounds like you are much into it.
But I understand nearly half what you write about DRM and so. But THANKS for your Time.
Because of you I know now why it is so big.
I started the 1.2GB Download at the End of my last Posting ... still 6 hours left :silly: to finish. 30kb sec
So, when Download is ready and I put it with Odin on my Pad ... is the complete System new then?
The Binary is then Stock or offical and I can put the Counter with TriangleAway to zero?
Read this morning that this wont go because its now Hardware based. a fuse or so.
So I do the big File on my Pad to get the complete stock System back and the ScreenMirroring option running?
Sorry for my stupid ... I read really a lot ... but its also a lot of "ways" and "to do" written out there.
The Test resetting with TriangleAway and test the ScreenMirroring didn't worked here.
The Pad is scanning long Time but couldn't find the TV.Yes ... it´s in the allowed List in Menu.
Did the same as before the root.But the Idea was good.
In all the "how to root" Sites in the Internet should written that some functions wound´t work after root as Warning ... ... maybe ... special for rooters like me
I read we can unroot the Pad with SU.Looked in the Menu ... there´s really a Point called unroot.
But that wound´t bring ScreenMirroring back or? Sounds to easy, or?
So, see you next Time
Bye for now your Nina

This ****ty DownloadSites!
Started the "little" GB-Download ... twice.
After Hours ! the Download interrupted ...
It's so slow and takes so looong.
Hope I will get it together ... maybe the Day will come. :fingers-crossed:
Maybe ....
... someone finds out a HowToDo in this Time. L o L
Have a nice one , Bye,Nina

Wow 350 KB sec
AndroidNeuling said:
This ****ty DownloadSites!
Started the "little" GB-Download ... twice.
After Hours ! the Download interrupted ...
It's so slow and takes so looong.
Hope I will get it together ... maybe the Day will come. :fingers-crossed:
Maybe ....
... someone finds out a HowToDo in this Time. L o L
Have a nice one , Bye,Nina
Click to expand...
Click to collapse
Holla die WaldFee ... now I can download 10 Times faster.
Samsung Tv we come
CU Nina

xdm9mm said:
1. Unfortunately, the Knox counter cannot be reset at this time.
2. If you have not installed any recovery, or other ROMs, Kernel, then you are running STOCK firmware.
3. Have you tried to reset your device and see if mirroring works? This is what I did with my S4 before and it worked, but I don't really know with the Tab pro because i have not rooted it as I want to use Knox.
4. If after you have reset your device, and screen mirroring does not work, try to download a STOCk firm... and flash it to your device using ODIN - this is run on your COMPUTER with your Tab pro connected via USB cable. This will UNROOT your device. Then try to use screen mirroring again and see if it works. If screen mirroring works, then it means you can't root your devic if you want to use screen mirroring.
5. There are free firewalls on google play, but I have not used any of them so i cannot comment which one is the best.
I suggest before you make changes to your Tab Pro from now on, go and read more about rooting, flashing ROMs, flashing RECOVERY... it is best NOT to RUSH what you want to do as an ERROR on your part might cause more problems.
Click to expand...
Click to collapse
totally agree
i think our german girl must have stuffed something up during flashing
flash back it to the original stock rom using odin and keep it as unrooted. my wife has an unrooted p600 and to honest, i cant see any point to root her device at all. based on what she or probably this girl wants to use it for.

[Q] Help !!!!

So, after rooting my tab 3 lite T110, i decided to install chainfire 3d but it's stuck on the reboot. Please Help !!!

AkramGamer01 said:
So, after rooting my tab 3 lite T110, i decided to install chainfire 3d but it's stuck on the reboot. Please Help !!!
Click to expand...
Click to collapse
Re-flash the stock firmware via Odin
Chainfire 3d is not supported by T110 (I think )

Here is another one.
New guy 1 or 2 post.
Claiming that rooting brought him to "stuck reboot"
Soon you will see him claiming he has no Wifi or DATA!
Clearly this is a question for help. I am not complaining about that. Because if you see he got an answer in less than 5 hours. If he did wrote in Tab3 QA it may had pass even days before he got an answer.
My point is to Raise a Flag that this is happening tooo often. Samsung is doing something different in Tab3! Beware.
to AkramGamer01
Agreed, if you do not have a Backup so that you can Restore, your best chance is "Re-flash the stock firmware via Odin"

rooting pro 8.4

Hi,
Im having real trouble trying to root my galaxy tab pro 8.4. I just cant get odin to see the tablet or my friends note 3. I have done everything the tutorials say. but not. It doesnt go blue so i cant flash.
I have rooted before but went back to normal rom from sammobile. I would like to root again but just get odin to work. Can anyone help or is there another way to do it.
Thanks

Remove Factory Reset Protection (FRP) On SM-910A

Hello Everyone,
I have recently update my phone to marshmallow without disabling Reactivation lock So now when i try to log in my samsung account that say "error processing" and can't use my phone :/
any help please ?
(i have tried many trick in (google/youtube) (OTG, Delete Samsung Account, Samsung Tool PRO 24.3, Miracle box 2.27a)

Samy_Wutlol said:
Hello Everyone,
I have recently update my phone to marshmallow without disabling Reactivation lock So now when i try to log in my samsung account that say "error processing" and can't use my phone :/
any help please ?
(i have tried many trick in (google/youtube) (OTG, Delete Samsung Account, Samsung Tool PRO 24.3, Miracle box 2.27a)
Click to expand...
Click to collapse
I have the same problem, I tried to update my Note 4 SM-N910A following the guide from norbarb but there was some red colored text showing some error while trying to install 1 by 1 the firmware and then when booting, it looked like everything was fine but then I got FRP and now I got locked with a useless phone for now and still running 5.1.1, I hope someone can shine some light and help us to get back in track

Jdekik said:
I have the same problem, I tried to update my Note 4 SM-N910A following the guide from norbarb but there was some red colored text showing some error while trying to install 1 by 1 the firmware and then when booting, it looked like everything was fine but then I got FRP and now I got locked with a useless phone for now and still running 5.1.1, I hope someone can shine some light and help us to get back in track
Click to expand...
Click to collapse
i have the solution big Thanks to @trihcpsci
firstly you have to downgrade to 5.1.1 OI2, and you must have an OTG Cable + USB flash drive and put inside the apk of Nova Luncher, install the drivers samsung and ADB in your pc
Than contacte me i can help you for the next step

Samy_Wutlol said:
i have the solution big Thanks to @trihcpsci
firstly you have to downgrade to 5.1.1 OI2, and you must have an OTG Cable + USB flash drive and put inside the apk of Nova Luncher, install the drivers samsung and ADB in your pc
Than contacte me i can help you for the next step
Click to expand...
Click to collapse
I finally installed MM on my Note 4 but still locked :/
I have to buy the OTG cable and I'll contact you as soon as I get the tools needed, thanks @Samy_Wutlol

Jdekik said:
I finally installed MM on my Note 4 but still locked :/
I have to buy the OTG cable and I'll contact you as soon as I get the tools needed, thanks @Samy_Wutlol
Click to expand...
Click to collapse
you must firstly downgrade to 5.1.1 OI2, the otg is not the only way to bypass configuration screen, you can search in youtube, you can also use SideSync, Or the HTTP Methode (youtube)
All that is to activate Debugging Mode In Setting, Than use the adb with some trick

Samy_Wutlol said:
you must firstly downgrade to 5.1.1 OI2, the otg is not the only way to bypass configuration screen, you can search in youtube, you can also use SideSync, Or the HTTP Methode (youtube)
All that is to activate Debugging Mode In Setting, Than use the adb with some trick
Click to expand...
Click to collapse
Well, I did enable the USB Debug mode, put the NOTE 4 on download mode and opened ODIN with the proper files to go back to 5.1.1 OI2, after that, I went back to 5.1.1 OI2 then the same message appeared "Samsung account, This device is locked because of an abnormal factory reset. Sign in to the Samsung account that you have already signed in to on this device that confirms that belongs to you." I've watched several videos for 3 days now and tried the methods shown with no luck, I've tried the SideSync, OTG, Modem, Bluetooth, etc. that is getting me going to a dead end. Also there's no support from Samsung nor AT&T since I'm on Cricket Wireless. Is there any way not patched by Samsung that I can use to get back my Note 4? Everything was good until I decided to update to MM and now I'm without phone :/

Never mind, I found a 100% working solution that got my Note 4 SM-N910A back to a working condition as if I just got it from the store. Anyways thanks mate!

A quick update, like I said, I got my phone back and also updated to 6.0.1 MM and has been working really great!

Jdekik said:
Never mind, I found a 100% working solution that got my Note 4 SM-N910A back to a working condition as if I just got it from the store. Anyways thanks mate!
Click to expand...
Click to collapse
Can you share the solution ?

samcex said:
Can you share the solution ?
Click to expand...
Click to collapse
Sure, I can. Do you have your Note 4 locked? or what's the problem with your phone?

Jdekik said:
Sure, I can. Do you have your Note 4 locked? or what's the problem with your phone?
Click to expand...
Click to collapse
It is Galaxy C5 it is frp locked I forgot my account.

samcex said:
It is Galaxy C5 it is frp locked I forgot my account.
Click to expand...
Click to collapse
There's tons of methods and apk u can sideload . I just put the apk in download folder with pc then used the talk back method and esfile explorer installed through chrome to bypass on galexy prime. U can also use sidesync method or dialer methods . Whatever gets u to a browser really. Good luck youtube and Google are ure friends.