Develop Bugs

[Q] Something Completely Strange... Seriously

Ok, So i have been pretty cautious with my GNII, but finally ran into my first issue....
I hate to say it, but im on Jedi X9 (although with custom theme, if that makes a difference) and after having absoulely zero issues thus far... i finally had my first Ohhhh S***** moment. Here is some Background...
After trying for almost an hour to get UPnPlay to read my Laptop (battery readings went from 13% to 6%) and finally deciding that my phone wasn't picking up the Laptop because the Wifi needed to be reset... and of course, after reseting the wifi, UPnPlay read my Laptop like a charm... Anyways, I decided to go smoke a cig and let my phone charge for a sec while i was doing so, and then this happened....
As i go to plug my phone into the stock charger, nothing happens... try to hit the power button.... nothing... unplug and tap power button nothing... try to switch sockets (top to bottom).... Nothing... change wall outlets completely... nothing.... Go into a different room and plug into a different outlet (in a different room)... nothing.... finally (after taking off my Otterbox-Defender Case) and pulling the battery... I put battery back in and plug phone into the wall... It starts to charge....
Still havent turned the phone back on....ok, just did and everything seems to be working fine (no bootloop)... recieved alerts (unread Emails/SMS/MMS)... but wow that was sorta a trip... NOT SURE WHY MY PHONE WASN"T CHARGING FOR THAT LITTLE INSTANCE OR WHY IT WENT FROM ~6% to 0% within what had to be just a few seconds (unless i was just abducted by aliens and had that whole time-lapse issue)....
Anyone else experience anything like this yet... ON ANY PRIOR DEVICE EVER???

I think I did once on my s2. But the phone was really dead and I got scared -_- . Since then I dont like it when the phone reaches 0% on my phone.
Sent from my SGH-T889 using xda app-developers app

Dito
Same thing happen to me on GSII. Long story short I was using my phone while it was charging, but it was still declining. I didn't think much of it until i was on zero for awhile. I wondered stupidly how long it could stay on zero while charging. Whole scenario was probably 20 min. Like an idiot I forgot and pulled the cord out on accident because I had also just put a file on and it instantly shut off. The phone was like vibrating weird. it would flash but turn off. I left it on a charger for hours, waiting waiting. And it just turned on. Lesson learned... Speaking of, just looked over and forgot I came on here because my GNII is stuck in bootloop hahaha. Gotta go

It is a good idea to watch your battery charge on modified ROMs and not allow the phone to go bellow 9 %..
That has always been my rule.
Keep the phone on the charger whenever you can, and also allow the devise to display the percentage battery
on the taskbar. This will allow you to keep an eye on how much energy is left.

maniep said:
It is a good idea to watch your battery charge on modified ROMs and not allow the phone to go bellow 9 %..
That has always been my rule.
Keep the phone on the charger whenever you can, and also allow the devise to display the percentage battery
on the taskbar. This will allow you to keep an eye on how much energy is left.
Click to expand...
Click to collapse
I usually let mine drains till 2-5% and then charge. I've been doing this since HD2 days and I never had any issue + getting great battery life.
Sent from my SGH-T889 using Tapatalk 2

Won't boot or charge

Anyone having problems with it not powering up. It will charge to about 8-12% then shut off. It gets really hot when it's charging but I can't get anywhere with this watch. Getting really frustrated, been trying to get it work for over 5 hrs. Has anyone had this issue?

gshaw1967 said:
Anyone having problems with it not powering up. It will charge to about 8-12% then shut off. It gets really hot when it's charging but I can't get anywhere with this watch. Getting really frustrated, been trying to get it work for over 5 hrs. Has anyone had this issue?
Click to expand...
Click to collapse
Boot it up. Press and hold power button. Chose reset device from menu. When it boots back up don't touch until charged.

Definitely had issues like this. I ultimately exchanged it (got lucky with Best Buy having it in stock) but I read here that you may want to reset it, and charge it while its completely off, to full battery, Before trying to sync and use it. My defective 360 wouldn't even factory reset, so YMMV.

tcollum said:
Definitely had issues like this. I ultimately exchanged it (got lucky with Best Buy having it in stock) but I read here that you may want to reset it, and charge it while its completely off, to full battery, Before trying to sync and use it. My defective 360 wouldn't even factory reset, so YMMV.
Click to expand...
Click to collapse
dottat said:
Boot it up. Press and hold power button. Chose reset device from menu. When it boots back up don't touch until charged.
Click to expand...
Click to collapse
Thanks guys, that worked appreciate it! :good:

Don't pair it to your phone. A service kicks off to do an update but you can't until it's 80% or more charged. As others have said, do the rest then leave it alone.
Same thing happened for me.

reTARDIS said:
Don't pair it to your phone. A service kicks off to do an update but you can't until it's 80% or more charged. As others have said, do the rest then leave it alone.
Same thing happened for me.
Click to expand...
Click to collapse
I'm having the exact same issue. How do you know when it is charged fully? When it is off there is no indicator of charge level. The Galaxy gear and gear live I had both had a battery icon when charging while off. I hope the battery is not a dead since the gear and live watches had awesome battery life for me...

Like a dumbass i tried to pair without fully charging it and was unsuccessful. Now the watch is dead and on the charger. Hopefully it charges or I will have to return this.

It took me about 10 attempted charging cycles over 24 hours before it worked. Usually the watch was off and it would be pretty hot. I noticed the charger was only a .5a so I changed the adapter to a 1.8a one I had. I left the watch on where the blue circle and time was showing and it charged right up from 3 to 100 in about an hour and today I used it from 2pm till 1030 pm with ambient screen and it was down to 39 now on charger for about 20 mins and it is up to 77. So far so good after a nightmarish 1st day...
Sent from my LG-D850 using XDA Free mobile app

yeah, I'm noticing my watch feeling hot while being charged. Sadly, it still won't power on. :crying:

It will, just wait a little while then when it is on the cradle press the power button for 3-5secs then it will come on. On the stock charger you will prob see the power circle start dropping then shut off. Plug in a higher rated Micro USB charger into the dock and it should charge fine.
Sent from my LG-D850 using XDA Free mobile app

bruceo said:
It will, just wait a little while then when it is on the cradle press the power button for 3-5secs then it will come on. On the stock charger you will prob see the power circle start dropping then shut off. Plug in a higher rated Micro USB charger into the dock and it should charge fine.
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah, I was @ 3% and charging using the stock and it powered off my itself. but, now I'm on a higher charger so hope things get better. I'm so impatient right now. I just want to start playing with it. hehehe

bruceo said:
It will, just wait a little while then when it is on the cradle press the power button for 3-5secs then it will come on. On the stock charger you will prob see the power circle start dropping then shut off. Plug in a higher rated Micro USB charger into the dock and it should charge fine.
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
Is this safe for the hardware? My moto 360 keeps floating between two percentages after about 2 hours. I plugged in the charger from my note II, and it seems to charge really quick. But is this higher amperage safe for the moto 360, since the stock is rated at a much lower amperage?

RodrigoKim said:
Is this safe for the hardware? My moto 360 keeps floating between two percentages after about 2 hours. I plugged in the charger from my note II, and it seems to charge really quick. But is this higher amperage safe for the moto 360, since the stock is rated at a much lower amperage?
Click to expand...
Click to collapse
The device will draw what it needs a .5a charger will provide up to that amount of current. a 2a charger will provide up to 2a of current but a device may not pull that much. It is generally thought that for LiIon batteries that providing a low maximum current and taking longer to charge will make the batteries last longer, so if you dont mind a slow charge cycle, which for a watch that should be charged while you are sleeping it doesnt matter then you should go back to the stock adapter to maximize total life.
I went off charger at 7:30am and now at 11 I am at 65%, which is terrible, but I'll wait a week to pass judgement, but my gear live and galaxy gear 1 with tizen both had awesome battery life of 2 full days with more than moderate use.... The Galaxy Gear 1 on Android was lucky to get more than 14 hrs of use.

Thanks everyone for helping me get my Watch up and running. For anyone who is new and reading this, fully charge your watch before pairing it since it will need at least 80% battery so it can update itself. Of course, this has already been stated in the thread and thanks to those folks who stated it already and all the credit goes to them.

I'm having this issue as well. I've been trying to charge it for the past few hours and it never gets past 10%. I kept trying to reset the device and it would never work. It kept coming up in the "Just a minute" mode which seems to eat the battery.
But finally on my last reset attempt, the device rebooted immediately and came back up on the "Select language" screen. I now have the device charging and am hopeful it will work this time.
But my big question is: how do you know when it's fully charged? Without knowing what the current charge level is, I'm afraid to try the update procedure or I may get stuck in the same "Just a minute" loop again. Anyone have any ideas on how to determine the charge level prior to setting up the device?

I killed mine. I tried to pair, got stuck on the "just a minute" screen and then it died. I charged it for a couple of hours and it still would get stuck. Somehow, I got to settings (still don't know how) and did a factory reset. Then, everything seemed ok and it was charged at 100% when I paired and did the update.
However, after the update, I got into a boot loop where it would show the M logo with the marks around the dial, flash to some colored balls, then say "android wear" and then it would reboot. Tech support from Motorola couldn't help me and finally after a few hours the watch died. I put it back on the charger and it would eventually fire back up and go into the bootloop again. It did it all night last night.
Furthermore, my indicator on the charger never lit up either.
I took it back and "exchanged" it for a new one that the store said would ship this week.
As much as I was anticipating this thing showing up, I'm pretty disappointed already.

Finally got mine booted. After successfully resetting the device (back to the "select a language" screen), I had it on the charger for about an hour. Then I tried again and it went through the whole installation successfully.

Ugh! Wish I read this first. Unable to get it to turn on at all, cannot get it charged over 6%

Over Achiever said:
Ugh! Wish I read this first. Unable to get it to turn on at all, cannot get it charged over 6%
Click to expand...
Click to collapse
I was in the same boat. The trick is to get the device reset. When I was trying to do that (via the menu that comes up when you press-and-hold the watch button), it would sit there and do nothing. Then 10 seconds later it would power down. But then as it charged, it would power back up and the "Just a minute" message would appear.
To get it to work, I turned the device off and let it charge. When it powered back on, I turned it off immediately and kept charging it. Then eventually, the charge jumped up to about 13%. I tried the device reset option again and this time it powered down immediately and booted back up with the "select a language" screen. I then turned off the display and let it charge for an hour. After that, I went through the setup and it worked.

DanPLC said:
I was in the same boat. The trick is to get the device reset ... After that, I went through the setup and it worked.
Click to expand...
Click to collapse
Thanks Dan, that did the trick. I see the firmware update added quite a few watch faces but can't customize the colors on those until the Connect app is updated.
Waiting for the watchface contest winner to be released by Motorola!

Moto 360 won't fully charge!

Hey guys,
I just charged my Moto 360 to 100% and it dropped to 99% the second I took it of charger so, I put it back on the charger and it didn't go above 99%, that'why I took it of the charger right now and it instantly droppd to 98% (WTF??) Can anybody tell me what's wrong with my device or if they experienced the same weird bug
Thanks,
Thomas

mine stays at 86% charging....anyone encounter this?

mine does similar.
It'll charge up to 95%, then sit there. I've gotta take it off, wait a bit, then put it back on the charger to keep going.
Doesn't do it alot - just occasionally.

I notice that this happens when the watch gets hot (e.g. extensive use before placing on the charger). Taking it off and letting it cool off for a while, and then putting it back on the charger, will resume normal charging to 100%.

hush66 said:
I notice that this happens when the watch gets hot (e.g. extensive use before placing on the charger). Taking it off and letting it cool off for a while, and then putting it back on the charger, will resume normal charging to 100%.
Click to expand...
Click to collapse
You are correct Sir..that's the remedy..I allow my 360 to cool before charging, and 100% result every time..If I have not used the watch (extensively) before charging..100% every time..I have taken mine off the charger at about 50% before, if I let it get down below 20%..let it cool, then back on charger, batteries take a more complete charge when in a cooler state..
Sent from my:
Jaocagomez Debloated ROM
4.4.4_21.11.21 (Unlocked)
XT1080M Droid Maxx #2
http://waynekent.com/page6.html
"Praise Jah" YOU people.!

Same here, not matter how long you still put it in charger after reaching 100 battery, it goes to 99% several seconds off the charger.
But I think it not impact battery life. Normally mine is 4-5% per hour which is enough for one day.

If you have custom watchfaces (not stock), you might want to disable them and go back to stock while charging. I noticed this and switched the watchface, went up to 100% right after I switched faces.

abuttino said:
If you have custom watchfaces (not stock), you might want to disable them and go back to stock while charging. I noticed this and switched the watchface, went up to 100% right after I switched faces.
Click to expand...
Click to collapse
I currently use the Pilot stock watchface and I'm going to let my watch cool off now before charging it, hope that'll do it
Sent from my GT-I9505G using XDA Free mobile app

Turn the screen off after putting the watch in the charger and it will stay much cooler while charging.

Steve-x said:
Turn the screen off after putting the watch in the charger and it will stay much cooler while charging.
Click to expand...
Click to collapse
How do i do that?
Sent from my GT-I9505G using XDA Free mobile app

As long as ambient mode is off I can always get my screen to turn off by pressing the side button. It doesn't always do it on the first press though. I can't say for certain what the magic is. Sometimes it takes three quick presses, sometimes two. Sometimes I need to repeat the button pushing a few times. Once it turned off all on its own. The dim charging screen is way too bright, so I always turn it off. After feeling the temperature difference in the morning I think it is just a good idea.

Even if I turn the screen off while charging, the watch would drop to 98% the moment it comes off the charger. When I put it back on the charger, it goes down to 96% even...

Similar problem
Mine does not go past 95% and then drops to 94 or 93%. I will try the cooling off thing, I hope that works.

Charging issue, I'm perplexed...

I charge my watch at night and it charges just fine. The problem is, since it isn't connected to my phone at night the battery drains. It was down to 15% when I got up this morning.
Is there a way, via root and and a script for example to have the watch charge to full then turn off? Or maybe even go into airplane mode after a length of time it has no connection?

I actually wish you can true off the watch and still charge it. I tried that but as soon as i put it on the charger it comes back on. I really don't need the watch to be on at night.

Why not keep it connected? Just charge phone & watch, leave them on. There is really no reason for the watch to ever be disconnected.

I charged the watch to full (it was almost full before I went to bed) I went to put it on the next morning and it was drained to 20%. I'd love for there to be a setting to charge to full and turn off. or power off and charge.

You can switch it off and then plug the charger in.
Switch it back on in the morning?

dupajapona said:
You can switch it off and then plug the charger in.
Switch it back on in the morning?
Click to expand...
Click to collapse
That's the issue. You can't turn it off and charge it. As soon as it is connected to the charger it turns on. Best I could say is put it in theater mode which completely shuts off the screen and notifications. But honestly I still don't see how the watch could be burning so much battery that the charger isn't able to keep it charged. But maybe that will fix the issue.
Sent from my Nexus 6 using Tapatalk

I've decided to just wear it at night and charge it when I get up in the morning. It gets charged while I'm getting ready for work.

I don't understand why Huawei didn't make it so the watch can be charged while powered off. It is pretty lame. I charge mine later in the afternoon. When I see that it is 100%, I turn it off then remove it from charger.

Rektifying said:
I don't understand why Huawei didn't make it so the watch can be charged while powered off. It is pretty lame. I charge mine later in the afternoon. When I see that it is 100%, I turn it off then remove it from charger.
Click to expand...
Click to collapse
I agree that it is kind of silly that you don't have that option but it's also not surprising. Look at all of the other watches out that act the same way. Moto 360, LG Urbane, LG G Watch R, Samsung Gear, or maybe just the live, even the iWatch. And that's just the ones I know of. The good news is that the watch has a power button, the crown, so a future update could fix it. And theater mode does solve the issue in my opinion. Just double tap the crown and done. I am going to test mine tonight by shutting down the phone and charging the watch with theater mode off. I would like to see what it does. I just can't imagine any way that it would burn 80 percent of the battery while connected to a charger.
One other option might be to use tasker to shut down everything you don't want when connected to a charger. I know you can do this on a phone but haven't tried on a watch before. But in theory it would work.
Sent from my Nexus 6 using Tapatalk

in my case I THINK it fell off the charger. I haven't had an issue since the first night with it.

gunnyman said:
in my case I THINK it fell off the charger. I haven't had an issue since the first night with it.
Click to expand...
Click to collapse
Ahh ok. That makes more sense. Thanks for the feedback.
Sent from my Nexus 6 using Tapatalk

Yea I dont think this is right because I throw mine on the charge when I get home, tap the button 3 times to turn off the screen, and then disable bluetooth on my phone (wifi is always off on the watch).
Every day I wake up to 100%.

Еxtreme overheating

Hello xda members,
So i will go straight to my problem.
Yesterday I left my Z5 Premium to charge over night (for like 4-5 hours). When i get up for work, I disconnected it from charger and quickly checked my phone (standard route - messenger, line app) those actions didn't take longer than 2 minutes. After that i left my on couch and went to bathroom. When i came back phone was super hot and with black screen. Tried to turn it on and off but nothing happened and decided to don't touch it and wait for it to cool down. Unfortunately it's been over 24 hours since that happened and still phone didn't even vibrate when i try to turn it on.
I started to thinking that battery or cpu is gone (when i put it back to charger again start to get super hot).
Thanks in advance!
Best Regards,
Stanimir Hristov.

Xshad3 said:
Hello xda members,
So i will go straight to my problem.
Yesterday I left my Z5 Premium to charge over night (for like 4-5 hours). When i get up for work, I disconnected it from charger and quickly checked my phone (standard route - messenger, line app) those actions didn't take longer than 2 minutes. After that i left my on couch and went to bathroom. When i came back phone was super hot and with black screen. Tried to turn it on and off but nothing happened and decided to don't touch it and wait for it to cool down. Unfortunately it's been over 24 hours since that happened and still phone didn't even vibrate when i try to turn it on.
I started to thinking that battery or cpu is gone (when i put it back to charger again start to get super hot).
Thanks in advance!
Best Regards,
Stanimir Hristov.
Click to expand...
Click to collapse
Is the phone hot towards the top part (cpu) or bottom/middle (battery)?
Sounds like you have an app that's stuck and running the cpu at max frequency constantly...did you install/update any app before the problem arose? If so, uninstall/downgrade it and see...
Are you using Flat Style Colored Bars by any chance? If you do and are running version 2.1.0 as it's known to cause cpu overheat, if it's the case downgrade to the previous version...
One last thing, have tried to force power down the phone (power button/volume up combo) that might fix a stuck app...

Xshad3 said:
Hello xda members,
So i will go straight to my problem.
Yesterday I left my Z5 Premium to charge over night (for like 4-5 hours). When i get up for work, I disconnected it from charger and quickly checked my phone (standard route - messenger, line app) those actions didn't take longer than 2 minutes. After that i left my on couch and went to bathroom. When i came back phone was super hot and with black screen. Tried to turn it on and off but nothing happened and decided to don't touch it and wait for it to cool down. Unfortunately it's been over 24 hours since that happened and still phone didn't even vibrate when i try to turn it on.
I started to thinking that battery or cpu is gone (when i put it back to charger again start to get super hot).
Thanks in advance!
Best Regards,
Stanimir Hristov.
Click to expand...
Click to collapse
FACEBOOK MESSENGER, and LINE MESSENGER are the worse apps i have observed over the years using mobile resources.
if I were you, i would have done following with my z5p
1. Press and hold the Power button and the Volume Up button at the same time ( FIVE SECONDS MAX). The device will vibrate 3 times, release THE BUTTONS IMMEDIATELY !!!, this will soft reset your phone. leave for few minutes and restart. if it doesn't restart, plug the charger and see if its charging. Once charged, start your device.
2. I would have uninstalled many apps which i don't use. for example bloatware,
3. since my device is rooted, i have installed PURIFY with root access granted and it stops AUTO STARTING apps by default and having notification access panel. the only apps i want to have auto start i have manually screened them. this apps overall HELPS me big time. it works on NON ROOTED phones also! but not to its full potential.

The problem is that i can't make phone to start. Even when i put it to charge still doesnt indicate anything (screen is black, no vibrate, no led indication) thats why i created this thread.

Xshad3 said:
The problem is that i can't make phone to start. Even when i put it to charge still doesnt indicate anything (screen is black, no vibrate, no led indication) thats why i created this thread.
Click to expand...
Click to collapse
if all above what me and DM said isn't helping then you must take the device to SONY TECH SHOP and let them look at your device!

Xshad3 said:
The problem is that i can't make phone to start. Even when i put it to charge still doesnt indicate anything (screen is black, no vibrate, no led indication) thats why i created this thread.
Click to expand...
Click to collapse
You might have soft brick your phone... But you still should be able to recover it...it might take a bit longer though, your battery is completely drained...
Read this thread, it's old but should still be relevant...
You never answered my questions though, did you install or updated or did anything in particular before the phone started to act up?

-DM- said:
You might have soft brick your phone... But you still should be able to recover it...it might take a bit longer though, your battery is completely drained...
Read this thread, it's old but should still be relevant...
You never answered my questions though, did you install or updated or did anything in particular before the phone started to act up?
Click to expand...
Click to collapse
No. I made settings to update only when phone is charging and is connected to wifi. Even made it to disable all data transfer while is locked. Phone itself isn't rooted and im using same apps since i bought phone.

Xshad3 said:
No. I made settings to update only when phone is charging and is connected to wifi. Even made it to disable all data transfer while is locked. Phone itself isn't rooted and im using same apps since i bought phone.
Click to expand...
Click to collapse
Is your phone still completely Unresponsive?
Did you try to leave on a charge to see if it shows any sign of life (led coming up)
Go check that thread that I posted, you'll bring it back to life...
They're hard to brick unless it's an hardware problem otherwise they can take a beating trust me

Hello again.
Just want to leave a quick update:
After finally I got free time I read thread that suggested me to read and started to attempting to revive phone. It's been an hour since I put phone on charger. Still no red led. Only "hot" area is at shell that covers CPU - area that is in red circle.
Everything else is cold. CPU temperature is around 38-42°C pretty normal I would say. So how much time I should leave to charge? Last time when phone was running battery was on 100% (last Friday).
Update 2:
I measured voltage of battery and it's 2.81V
I will leave it to charge till I sleep and tomorrow will need to purchase new battery.
When I bought phone I had problems with battery but with last update from SONY I managed to use phone for 3 days with one charge (normal use - few captured pictures, an hour games, 30 minutes watching Californication on Netflix and FB and Line - less than 10 minutes).
So can you recommend me an site where I can purchase new battery (I want to be original if possible)?
Best Regards,
Stanimir Hristov

Well guys I have bad news. Problem is in hardware.
After I left phone to charge over night when I woke up I unplugged charger and measured voltage of battery. The results was bad: voltage of battery was 0V. Then I unplugged battery and put phone to charge without connected battery to measure what voltage is going to battery and it was 0.61V.
So thanks again for trying to help me and encouraging to fix problem.