is it possible to install viper4android in stock based roms
dante_67 said:
is it possible to install viper4android in stock based roms
Click to expand...
Click to collapse
yes it possible but you need to disable LPA
hyperionx7 said:
yes it possible but you need to disable LPA
Click to expand...
Click to collapse
Disabled lpa, but still the driver is not being installed, the sound fx is copied to the sound fx folder but the in app installation is not happening, it does install but even after rebooting the driver version stays 0.0.0.0and the app asks to install the driver again and again
dante_67 said:
Disabled lpa, but still the driver is not being installed, the sound fx is copied to the sound fx folder but the in app installation is not happening, it does install but even after rebooting the driver version stays 0.0.0.0and the app asks to install the driver again and again
Click to expand...
Click to collapse
what rom are you using? I had that issue on one of the sphinx versions, though i can confirm it works with the Stock AT&T and sphinx v1.6 for the E980, as well as sphinx V2.0
Deleted
luisoman2000 said:
what rom are you using? I had that issue on one of the sphinx versions, though i can confirm it works with the Stock AT&T and sphinx v1.6 for the E980, as well as sphinx V2.0
Click to expand...
Click to collapse
I am using sphinx 1.6. have tried every method but could not get this to work, the driver doesnt get installed, although the sound libs are copied right
Please any suggestion
Are you using Sony walkman. I had the same issue before ... I did everything that was suggested but didn't work... found out that v4a didn't like the sound enhancement apk I was using with it ..
Sent from my LG-E980 using XDA Free mobile app
dante_67 said:
Disabled lpa, but still the driver is not being installed, the sound fx is copied to the sound fx folder but the in app installation is not happening, it does install but even after rebooting the driver version stays 0.0.0.0and the app asks to install the driver again and again
Click to expand...
Click to collapse
use latest version from here also please check audio_effects.conf in /system/etc there should be line like this v4a_standard_fx with uuid number
jburgos3 said:
Are you using Sony walkman. I had the same issue before ... I did everything that was suggested but didn't work... found out that v4a didn't like the sound enhancement apk I was using with it ..
Sent from my LG-E980 using XDA Free mobile app
Click to expand...
Click to collapse
Thank You so very much, You helped a lot, and managed to get the damn thing working like a charm
dante_67 said:
Thank You so very much, You helped a lot, and managed to get the damn thing working like a charm
Click to expand...
Click to collapse
You're welcome enjoy!!
Sent from my LG-E980 using XDA Free mobile app
Related
go to the original
Can't download man
Gesendet von meinem GT-I8190 mit Tapatalk
Can you check the download address, gives an error. thanks
sorry guys i forgot to validate my mediafire account so its limited to 150 downloads , Ijust rectified my mistake
link works now
not working
on cm 10.2 by mclaw
loukman said:
not working
on cm 10.2 by mclaw
Click to expand...
Click to collapse
Are you kidding me im using same rom if u r pushing it into system folder dont do it . Just install it as a normal apk and u can grab the widget
which build are u using, try to update the rom
eswarvf said:
Are you kidding me im using same rom if u r pushing it into system folder dont do it . Just install it as a normal apk and u can grab the widget
Click to expand...
Click to collapse
the app is working but i have constant fc for dsp manager and music effects
loukman said:
the app is working but i have constant fc for dsp manager and music effects
Click to expand...
Click to collapse
clear app data for dsp manager and walkman
i removed dsp manager that stop th constant fc now its working
loukman said:
i removed dsp manager that stop th constant fc now its working
Click to expand...
Click to collapse
did u installed any other mods like megabassbeats like that it gives fc for me too everytime
no installed on a fresh rom i didnt install any audio mods
Thanks for the apk:good:
I get "There is a problem parsing the package" when i try to install
Sent from my GT-I8190 using Tapatalk
not installed
when installing says unidentified package
juliàcarax said:
when installing says unidentified package
Click to expand...
Click to collapse
(apk i fine) it doesnt work on touchwiz based roms
Links are dead. Please reupload! Thanks in advance!
Sent from my GT-I8190 using xda app-developers app
where is the download link bro? cant find it in this post :/:crying:
Hienn said:
where is the download link bro? cant find it in this post :/:crying:
Click to expand...
Click to collapse
go here itll work
eswarvf said:
go here itll work
Click to expand...
Click to collapse
did it work for you.
if yes,with which Rom?
I am using PAC man 4.4.4
thank you
samnettt said:
did it work for you.
if yes,with which Rom?
I am using PAC man 4.4.4
thank you
Click to expand...
Click to collapse
It works on any device but only thing that worries me is that empty navigation space in carbon rom i think its rom bug
I have Note 2 running omega 4.1.2 ROm and when i click sound effects in sound>settings i get force close.Plz help
mubeenshahid said:
I have Note 2 running omega 4.1.2 ROm and when i click sound effects in sound>settings i get force close.Plz help
Click to expand...
Click to collapse
have you installed any other sound mods,
like Viper or Beats?
aukhan said:
have you installed any other sound mods,
like Viper or Beats?
Click to expand...
Click to collapse
I have installed viper audio and has not been able to select it in sound effects .plz help
Sent from my GT-N7100
mubeenshahid said:
I have installed viper audio and has not been able to select it in sound effects .plz help
Sent from my GT-N7100
Click to expand...
Click to collapse
You dont have to select it in sound Effects
Do 1 thing
open Viper and go to options click on uninstall driver
go to settings Application manager click on Clear data>then uninstall the app
Then install Busy box
open either do a smart install or normal install
then install Viper FX
then install the driver by launching the app
then reboot instantly once you install the driver.
now launch the Viper and make the settings which suits the best.
Now enjoy.
*You dont have to select it in Sound effects.
aukhan said:
You dont have to select it in sound Effects
Do 1 thing
open Viper and go to options click on uninstall driver
go to settings Application manager click on Clear data>then uninstall the app
Then install Busy box
open either do a smart install or normal install
then install Viper FX
then install the driver by launching the app
then reboot instantly once you install the driver.
now launch the Viper and make the settings which suits the best.
Now enjoy.
*You dont have to select it in Sound effects.
Click to expand...
Click to collapse
it still doesnt work
mubeenshahid said:
it still doesnt work
Click to expand...
Click to collapse
try to restore if there is a backup. or post this query on the same thread someone should be able to help you there.
This is a sound mod for stock Lollipop ROM and is tested on c6906 but should work on c6903 and c6902 models. All scripts and files are not mine. All credits go to their owners, I just made the tutorial for you to enjoy bug free good sound on your z1.
Note: this will set your SElinux to permissive, if you don't know what it means research a little. It's a security lock on your phone to make it more secure and it will disable it.
1. Install busybox on your phone.
2. Install SELinux apk and open it to set kernel to permissive.
3. Boot to recovery and flash "testlolliviper.zip", no need to wipe anything.
4. Open Viper 4 android app on your app drawer and install drivers then reboot.
5. Enjoy your bug free Lollipop improved sound.
Note: SELinux must be kept as permissive for Viper mod to work.
Script credits go to their respective owners, I do not own any of the mods. I just made this tutorial since no one has done one for our z1.
all i need is usb/dac amp option and it still doesn't work, rest are working. and it works on my ZTE v5 redbull but not on my z1 (Shame ).
I lost recovery trying this ,what happened?
SANTUMIL said:
I lost recovery trying this ,what happened?
Click to expand...
Click to collapse
Execute the dual recovery installer from this link on your pc with debugging on your phone.
It's nuts dual recovery, I will look into that. Here's the link
http://nut.xperia-files.com download version 2.8.14 installer zip.
harman_preet72 said:
all i need is usb/dac amp option and it still doesn't work, rest are working. and it works on my ZTE v5 redbull but not on my z1 (Shame ).
Click to expand...
Click to collapse
wait, what's that option for? I think u can use dac without the option?
sorry for my lack of knowledge....
Steps have been re-edited so there are no procedure problems. Everything should go fine now. Comment if there are any troubles, if you like it hit the thanks button.
Follow the new instructions. It should now work. If not comment and I will try to help.
KWOKSFUNG said:
wait, what's that option for? I think u can use dac without the option?
sorry for my lack of knowledge....
Click to expand...
Click to collapse
harman_preet72 said:
all i need is usb/dac amp option and it still doesn't work, rest are working. and it works on my ZTE v5 redbull but not on my z1 (Shame ).
Click to expand...
Click to collapse
It shall now work on your z1 friend. Try the new steps.
AudioSettings FC after i flash it
KWOKSFUNG said:
AudioSettings FC after i flash it
Click to expand...
Click to collapse
That's strange, it doesn't happen to me. Try to clear AudioSettings data and see if it keeps FCing.
grimreaper3439 said:
That's strange, it doesn't happen to me. Try to clear AudioSettings data and see if it keeps FCing.
Click to expand...
Click to collapse
Maybe it cannot be functional with dseehx mod??
Though i found a workaround
Use standard 2.3.4
trigering the dseehx (both enable/disable)will enable v4a to work for few seconds.
Enable DSEE-HX..... some seconds later v4a dead right?
now keep the music playing
now press home to leave music-> enter music again->quit->enter->quit->enter->quit
repeat a few times v4a will suddenly work (forever) when u leave walkman by pressing home = =
KWOKSFUNG said:
AudioSettings FC after i flash it
Click to expand...
Click to collapse
KWOKSFUNG said:
Maybe it cannot be functional with dseehx mod??
Click to expand...
Click to collapse
Yeah, that's the problem. It's barely stable on stock I forgot to mention that.
grimreaper3439 said:
Yeah, that's the problem. It's barely stable on stock I forgot to mention that.
Click to expand...
Click to collapse
^last thread updated
Though with v4a, the effect of dseehx is very obvious
KWOKSFUNG said:
^last thread updated
Though with v4a, the effect of dseehx is very obvious
Click to expand...
Click to collapse
I got it to work too, and I didn't have any problems wei ugh them being both enabled. Might be a file you have or a line that interferes. But it's good you got it to work.
Does doing so re-enable usb audio support?
Closed
Initial Release
Reserved
Phone keeps rebooting after flash walkman and its buildprop mod
Sent from my HM 1SW
aldirudianto said:
Phone keeps rebooting after flash walkman and its buildprop mod
Sent from my HM 1SW
Click to expand...
Click to collapse
Which version of android you are using
flash only for appropriate version
And i personally confirmed it working on all lollipop roms
and follow the instructions delete stock music and audiofx from system/app and system/priv-app
eswarvf said:
Which version of android you are using
flash only for appropriate version
And i personally confirmed it working on all lollipop roms
and follow the instructions delete stock music and audiofx from system/app and system/priv-app
Click to expand...
Click to collapse
I am using cm12.1, i had followed the instructions, i think xposed is behind of it, romracer's version is still buggy, i'll try it later without xposed or with rovo's exposed
One more question, would it work fine with viper4android? Because i really love with the sound production of it
Sent from my HM 1SW
aldirudianto said:
I am using cm12.1, i had followed the instructions, i think xposed is behind of it, romracer's version is still buggy, i'll try it later without xposed or with rovo's exposed
One more question, would it work fine with viper4android? Because i really love with the sound production of it
Sent from my HM 1SW
Click to expand...
Click to collapse
I am using it right now with xposed installed.
Its not the issue and no it wont work with viper4android instead we get clear audio+ which is good and with xb 50ap earphones my phone is rocking with the settings
I have reset the links try again
eswarvf said:
I am using it right now with xposed installed.
Its not the issue and no it wont work with viper4android instead we get clear audio+ which is good and with xb 50ap earphones my phone is rocking with the settings
I have reset the links try again
Click to expand...
Click to collapse
Which xposed version do u use?
Sent from my HM 1SW
aldirudianto said:
Which xposed version do u use?
Sent from my HM 1SW
Click to expand...
Click to collapse
the old super alpha
not by rovo as i am satisfied with alpha
eswarvf said:
Hi there. I want to Share some apps and Sounds here and will update with new apps time to time
its very small right now but in time believe me ill make it a mess
Note:This thread is collection of hard work from different Devs and some of my tweaks.All of these are tested on CM12.1 and Sounds are universally flashable
Samsung and Mi Sounds (Alarms,Ringtones,Notifications)
here
The Beautiful and Powerful the best: Mixplorer ,Trust me the Best Files explorer even better than stock one (Works on every OS)
Here
Walkman (with updates from playstore, If you own a sony earphones like me then you must use this one)
Here
Don't know how it works or may be due to z3 framework but lets begin
Instructions:
1)Go to the link and download it for the appropriate android version
2)Delete AudioFX, DSP Manager, etc before flashing
3)Flash only Walkman player and build prop fix and don't flash addons
4)Now you can get music update from playstore
Quickboot for Snapdragon devices (enable it in developer options)
here
Click to expand...
Click to collapse
First of all thanks for your effort.But the walkman is not working after updating in playstore.It's force closing.
vicky romero said:
First of all thanks for your effort.But the walkman is not working after updating in playstore.It's force closing.
Click to expand...
Click to collapse
which rom buddy and working perfectly on moto e and s iii mini too,just try clearing data and delete audiofx from system/priv-app and even stock music player too (ignore if u did these)
eswarvf said:
which rom buddy and working perfectly on moto e and s iii mini too,just try clearing data and delete audiofx from system/priv-app and even stock music player too (ignore if u did these)
Click to expand...
Click to collapse
Tried everything u have said but no use. Still the app is forseclosing. I'm currently using cm 12.1 on my redmi 1s.
vicky romero said:
Tried everything u have said but no use. Still the app is forseclosing. I'm currently using cm 12.1 on my redmi 1s.
Click to expand...
Click to collapse
It will only happen if u have downloaded and flashed extra addons or using sound mods like dolby or viper or something else
eswarvf said:
It will only happen if u have downloaded and flashed extra addons or using sound mods like dolby or viper or something else
Click to expand...
Click to collapse
No i haven't flashed anything except walkman. I did a clean install of the rom and flashed the zip again but the issue still persists
Sent from my HM 1SW using Tapatalk
vicky romero said:
No i haven't flashed anything except walkman. I did a clean install of the rom and flashed the zip again but the issue still persists
Sent from my HM 1SW using Tapatalk
Click to expand...
Click to collapse
I am sorry for asking this but still i need to get the point
did u flash the z3 build prop fix
If flashed did u do it in order after flashing walkman then z3 build prop fix ?
It working for me look for screen and same on cm12.1
eswarvf said:
I am sorry for asking this but still i need to get the point
did u flash the z3 build prop fix
If flashed did u do it in order after flashing walkman then z3 build prop fix ?
It working for me look for screen and same on cm12.1
Click to expand...
Click to collapse
Yes i have flashed them in order that you have mentioned. But it's still not working
Sent from my HM 1SW using Tapatalk
Finally a working versions!
Thanks to @Oel for finding the one.
Flash the following from TWRP. Set SELinux to permissive.
https://androidfilehost.com/?fid=746010030569951476
I have used this on 8.1 without a problem.
It work in permissive only.
Install clear coche .
https://www.mediafire.com/file/guwy42zujsdy84e/Dolby-Oreo.zip
Sent from my LEX720 using xda premium
mchlbenner said:
I have used this on 8.1 without a problem.
It work in permissive only.
Install clear coche .
https://www.mediafire.com/file/guwy42zujsdy84e/Dolby-Oreo.zip
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
This is Dolby Digital, not Dolby Atmos...
A BIG difference.
The sound is really good do what want!
Sent from my LEX727 using xda premium
mchlbenner said:
The sound is really good do what want!
Sent from my LEX727 using xda premium
Click to expand...
Click to collapse
No.
The sound with Dolby Atmos is a completley different universe. The highs and the basses are more clearer and vivid. Dolby Digital sounds distored snd dump and cheap.
Oel said:
No.
The sound with Dolby Atmos is a completley different universe. The highs and the basses are more clearer and vivid. Dolby Digital sounds distored snd dump and cheap.
Click to expand...
Click to collapse
Sound good to me you will have a long wait for the other what I have heard.
Sent from my LEX727 using xda premium
Finally i found a way to bring Dolby Atmos to work on the AOSIP Oreo rom!
You need permissive Mode. (Selinux Changer)
Download this zip:
*Deleted*
Install the zip trough TWRP and reboot.
After rebooting you see only Viber4Android FX in the App Drawer.
You have to extract the Dolby Atmos App from the Zip, and to install it.
Open Dolby Atmos, it should work now.
Sent from my LEX727 using xda premium
This does not work Bluetooth brakes and then will not boot again.
You are right. After some hours it doesnt work anymore. Its not stable.
But than i found this new version from 2. February:
https://androidfilehost.com/?fid=746010030569951038
I flashed it and it works out of the box.
Testing now.....
Oel said:
You are right. After some hours it doesnt work anymore. Its not stable.
But than i found this new version from 2. February:
https://androidfilehost.com/?fid=746010030569951038
I flashed it and it works out of the box.
Testing now.....
Click to expand...
Click to collapse
You are the only one this has worked post screen shots then.
Until do post I don't believe you.
The link is not for are phone.
DolbyAtmos_Axon7_Oreo_20180202.zip
This not for a phone you will not boot.
Sent from my LEX727 using xda premium
mchlbenner said:
You are the only one this has worked post screen shots then.
Until do post I don't believe you.
The link is not for are phone.
DolbyAtmos_Axon7_Oreo_20180202.zip
This not for a phone you will not boot.
Sent from my LEX727 using xda premium
Click to expand...
Click to collapse
Here, you unbeliever...
Oel said:
Here, you unbeliever...
Click to expand...
Click to collapse
The app is crashing when I try to start it. I'm wondering if it is related to the Arise magisk module, or my Arise install. Did you have any other audio mods installed when doing this?
slgooding said:
The app is crashing when I try to start it. I'm wondering if it is related to the Arise magisk module, or my Arise install. Did you have any other audio mods installed when doing this?
Click to expand...
Click to collapse
No.
I flashed only this mod, unpacked the zip and installed the Dolby Atmos apk. Than i deleted the system partition, flashed the rom and the gapps and magisk, reboot and Fiesta.
Now i installed viber trough as magisk module. Dolby Atmos is still working and viber to.
And i had no arise config in the root!
Oel said:
No.
I flashed only this mod, unpacked the zip and installed the Dolby Atmos apk. Than i deleted the system partition, flashed the rom and the gapps and magisk, reboot and Fiesta.
Now i installed viber trough as magisk module. Dolby Atmos is still working and viber to.
And i had no arise config in the root!
Click to expand...
Click to collapse
Okay, just to make sure I have this correct. You flashed the atmos zip, then booted, installed the apk that is in the zip and then did a clean flash of AICP?
slgooding said:
Okay, just to make sure I have this correct. You flashed the atmos zip, then booted, installed the apk that is in the zip and then did a clean flash of AICP?
Click to expand...
Click to collapse
I found a newer and better Atmos mod.
https://androidfilehost.com/?fid=746010030569951476
Flash it in TWRP, should work normal.
For me it works great.
I have a X720 and i am on AOSIP Oreo 8.1.
Oel said:
I found a newer and better Atmos mod.
https://androidfilehost.com/?fid=746010030569951476
Flash it in TWRP, should work normal.
For me it works great.
I have a X720 and i am on AOSIP Oreo 8.1.
Click to expand...
Click to collapse
Confirmed working with both versions you linked. Great find. Finally!
guitardedhero said:
Standard Edition:
Latest: 20180207
MD5: 312324a14ab6644883b5828cc0bad132
- Various corrections and adjustments.
Click to expand...
Click to collapse
After flashed the dolby zip from twrp I was stuck in the boot ... then I came back in TWRP and I flashed the rom zip without wipe .... then restarted the device and it restarted well ... in the drawer there is the dolby app and it works (with some small interface flaw).
Rom aicp_zl1_o-13.1-WEEKLY-20180207 for Leeco x720
TWRP twrp-3.2.1-0-20180108-codeworkx-zl1
giogio1 said:
After flashed the dolby zip from twrp I was stuck in the boot ... then I came back in TWRP and I flashed the rom zip without wipe .... then restarted the device and it restarted well ... in the drawer there is the dolby app and it works (with some small interface flaw).
Rom aicp_zl1_o-13.1-WEEKLY-20180207 for Leeco x720
TWRP twrp-3.2.1-0-20180108-codeworkx-zl1
Click to expand...
Click to collapse
anything didnt work for me, anyone know how to work in the last version of aicp oreo? any instruction please?
Look ;
https://forum.xda-developers.com/oneplus-5/themes/app-dolby-atmos-axon-7-oreo-port-t3734040
Oel said:
I found a newer and better Atmos mod.
https://androidfilehost.com/?fid=746010030569951476
Flash it in TWRP, should work normal.
For me it works great.
I have a X720 and i am on AOSIP Oreo 8.1.
Click to expand...
Click to collapse
From the same folder https://androidfilehost.com/?fid=890129502657581615 this one worked for me perfectly too and it seems to be the latest one as the file name suggests.
[Mod][AE][GH]DolbyAtmos_Axon7_Oreo_20180207-fixed-Viper's_prepared.zip
my device X727 (Lineage OS 15.1) with magisk for systemless root. It shows up as magisk module after flashing through twrp so it needs root.