Please help as this is my firends phone and i need to flash STOCK recovery on it! or any way to flash OS on it! as he soft bricked it!
ok so i have a samsung galaxy s2 SGH-T989 and downloaded the firware from sammobile! whenever i flash the ROM it says
getting PIT for mapping
There is NO PIT PARTITION!!
PLEASE help me getting PIT file or any other solution!
attachment of screenshot of what is happening! is below
rahul8040 said:
Please help as this is my firends phone and i need to flash STOCK recovery on it! or any way to flash OS on it! as he soft bricked it!
ok so i have a samsung galaxy s2 SGH-T989 and downloaded the firware from sammobile! whenever i flash the ROM it says
getting PIT for mapping
There is NO PIT PARTITION!!
PLEASE help me getting PIT file or any other solution!
attachment of screenshot of what is happening! is below
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1808137
Fasted12 said:
http://forum.xda-developers.com/showthread.php?t=1808137
Click to expand...
Click to collapse
thank you so much but i have downloaded that file! but still ODIN V1.85 says fail!!! pleaseee HELP! i ticked re-partiotioned and auto reboot and tried with and without f reset timer too! and i have downloaded the corresponding firmware of that PIT file still nothing pleaseeee HELP!
rahul8040 said:
thank you so much but i have downloaded that file! but still ODIN V1.85 says fail!!! pleaseee HELP! i ticked re-partiotioned and auto reboot and tried with and without f reset timer too! and i have downloaded the corresponding firmware of that PIT file still nothing pleaseeee HELP!
Click to expand...
Click to collapse
does your uvli4 say home.tar or tmb.tar
you need full flash package (tmb)
so im guessing it wont go to recovery
Fasted12 said:
does your uvli4 say home.tar or tmb.tar
you need full flash package (tmb)
Click to expand...
Click to collapse
i download HOME.tar which has only one file that goes in PDA! but why? did i do something wrong? where can i get tmb.tar? and how to flash that? PLEASE hep! thanks bro u r superman!!!
HELLPP! soft BRICK!
OK! so basically it's like this!
i have the phone i am its going in downloading mode but not in recovery! ok and no OS is installed as it only stucks ar SAMSUNG logo when tirning on normally!
now i have alll the ODIN version but i am using ODIN v1.85V for this! and firstly when i flash that
T989UVMC6_T989TMB_T989UVMC6_HOME.tar
file it says GETTING PIT partiotion something
and then NO PIT found or something like that you can see it in above scrennshot!
now i used other ODIN version V3.04 V3.07 or .09
but all JUST HANGS like ODIN works but nothing righ above [ID:COM] SECTION AND NOTHING ON PHONE OR SOMETHING!!
doesn't even start the process after pressing START!
what the HELL should i doooo even tried PIT file in that but it says FAIL i do tick RE-PARTITION also! ) i also have
T989UVLI4_T989TMBLI4_T989UVLI4_HOME.tar
but same with this and i have this PIT file!
CELOX_USA_0824.PIT
HELLPPPP!
rahul8040 said:
OK! so basically it's like this!
i have the phone i am its going in downloading mode but not in recovery! ok and no OS is installed as it only stucks ar SAMSUNG logo when tirning on normally!
now i have alll the ODIN version but i am using ODIN v1.85V for this! and firstly when i flash that
T989UVMC6_T989TMB_T989UVMC6_HOME.tar
file it says GETTING PIT partiotion something
and then NO PIT found or something like that you can see it in above scrennshot!
now i used other ODIN version V3.04 V3.07 or .09
but all JUST HANGS like ODIN works but nothing righ above [ID:COM] SECTION AND NOTHING ON PHONE OR SOMETHING!!
doesn't even start the process after pressing START!
what the HELL should i doooo even tried PIT file in that but it says FAIL i do tick RE-PARTITION also! ) i also have
T989UVLI4_T989TMBLI4_T989UVLI4_HOME.tar
but same with this and i have this PIT file!
CELOX_USA_0824.PIT
HELLPPPP!
Click to expand...
Click to collapse
sorry, not paying attention, pit is for original t989 rom 2.3.6 uvkl1--not sure where to get it
Fasted12 said:
sorry, not paying attention, pit is for original t989 rom 2.3.6 uvkl1--not sure where to get it
Click to expand...
Click to collapse
when you flash pit, dont check anything, after it says pass-flash firmware with reboot checked
'
if it doesnt work ill pull mine out when i get home and send you the link
Fasted12 said:
when you flash pit, dont check anything, after it says pass-flash firmware with reboot checked
'
if it doesnt work ill pull mine out when i get home and send you the link
Click to expand...
Click to collapse
OK so basically you are saying that i should just FLASH the .PIT file first! not the firmware along with it! ok i will try that...first JUST FLASH the PIT and nothing checked? not even the re-partition option? ok and then i should flash the ROM! ?? am i correct?
Fasted12 said:
sorry, not paying attention, pit is for original t989 rom 2.3.6 uvkl1--not sure where to get it
Click to expand...
Click to collapse
and i cant see any firmware like uvkl1 is that even a firmware? do u mean UVLH1?
rahul8040 said:
OK so basically you are saying that i should just FLASH the .PIT file first! not the firmware along with it! ok i will try that...first JUST FLASH the PIT and nothing checked? not even the re-partition option? ok and then i should flash the ROM! ?? am i correct?
Click to expand...
Click to collapse
thats correct, when flashing .pit file nothing is checked-its not repartioning , after it passes (if) , go ahead and flash firmware, dont disconnect.
uvkl1 was the gingerbread these phone came with, but i was told this would work with ics.(uvli4)
Fasted12 said:
uvkl1 was the gingerbread these phone came with, but i was told this would work with ics.(uvli4)
Click to expand...
Click to collapse
I can confirm it works with GB and ICS, but I had problems with JB (maybe it was just Heimdall, but idk)
Sent from my SGH-T989
thanks to Krebs830 (member) for this
https://www.dropbox.com/s/d0rq3hj8sp6fnrm/SGH-T989.zip
https://www.dropbox.com/s/vxapb57yeuk60ud/T989UVMC6_T989TMBMC6_TMB.zip
in the first download, unzip, click on sgh-t989, twice- pitfile.pit-this one is for jelly bean rom
for this load both files in odin , check repartition and f.reset
original thread http://forum.xda-developers.com/showthread.php?t=2646310&page=11
---------- Post added at 12:17 AM ---------- Previous post was at 12:05 AM ----------
Default Dirt SOFT BRICK SGH-T989!!
OK! SO, basically it's like this!
i have the phone SGH-T989 anf its going in downloading mode but not in recovery! ok and no OS is installed as it only stuck at SAMSUNG logo when turning on normally!
now i have alll the ODIN version but i am using ODIN v1.85V for this! and firstly when i flash that
T989UVMC6_T989TMB_T989UVMC6_HOME.tar
file it says GETTING PIT partiotion something
and then NO PIT found or something like that!!
now i used other ODIN version V3.04 V3.07 or .09
but all JUST HANGS like ODIN works but nothing righ above [ID:COM] SECTION AND NOTHING ON PHONE OR SOMETHING!!
doesn't even start the process after pressing START!
what the HELL should i do even tried PIT file in that but it says FAIL i do tick RE-PARTITION also! ) i also have
T989UVLI4_T989TMBLI4_T989UVLI4_HOME.tar
but same with this and i have this PIT file!
CELOX_USA_0824.PIT
HELLPPPP!
MY WORK
just saw this new post in the general section... if your odin is hanging maybe you need to reinstall drivers and make sure kies is stopped(or delete it, its almost useless)
Fasted12 said:
thanks to Krebs830 (member) for this
https://www.dropbox.com/s/d0rq3hj8sp6fnrm/SGH-T989.zip
https://www.dropbox.com/s/vxapb57yeuk60ud/T989UVMC6_T989TMBMC6_TMB.zip
in the first download, unzip, click on sgh-t989, twice- pitfile.pit-this one is for jelly bean rom
for this load both files in odin , check repartition and f.reset
original thread http://forum.xda-developers.com/showthread.php?t=2646310&page=11
---------- Post added at 12:17 AM ---------- Previous post was at 12:05 AM ----------
Default Dirt SOFT BRICK SGH-T989!!
OK! SO, basically it's like this!
i have the phone SGH-T989 anf its going in downloading mode but not in recovery! ok and no OS is installed as it only stuck at SAMSUNG logo when turning on normally!
now i have alll the ODIN version but i am using ODIN v1.85V for this! and firstly when i flash that
T989UVMC6_T989TMB_T989UVMC6_HOME.tar
file it says GETTING PIT partiotion something
and then NO PIT found or something like that!!
now i used other ODIN version V3.04 V3.07 or .09
but all JUST HANGS like ODIN works but nothing righ above [ID:COM] SECTION AND NOTHING ON PHONE OR SOMETHING!!
doesn't even start the process after pressing START!
what the HELL should i do even tried PIT file in that but it says FAIL i do tick RE-PARTITION also! ) i also have
T989UVLI4_T989TMBLI4_T989UVLI4_HOME.tar
but same with this and i have this PIT file!
CELOX_USA_0824.PIT
HELLPPPP!
MY WORK
just saw this new post in the general section... if your odin is hanging maybe you need to reinstall drivers and make sure kies is stopped(or delete it, its almost useless)
Click to expand...
Click to collapse
okk, thank youuuu so much for a quick and helpful reply! i just wanna say that in thaat folder there are many files...soo, i should only take pitfile.pit with the
T989UVMC6_T989TMB_T989UVMC6_HOME.tar firmware in PDA right? and add them both together with only f.reset timer and re-partition ticked right?? and flash it? right?
ok i tired it but it didn't helped it still says FAIL! i have odin v1.85 and i checked onlt f reset timer and re-partition and placed the pit file in the pit section and ROM in pda section! am i doing something wrong?!
Try using Heimdall. Use this pit file ( http://forum.xda-developers.com/showthread.php?p=53455783) with the 4.0.4 stock ROM from samfirmware.com and flash it using Heimdall with repartition checked. This is what worked for me when nothing else did. I was using Linux, but there is Heimdall for windows. Make sure you install Heimdall and Heimdall frontend as the frontend makes it a lot easier. Run the frontend for the above steps.
Sent from my SGH-T989
jrc2 said:
Try using Heimdall. Use this pit file ( http://forum.xda-developers.com/showthread.php?p=53455783) with the 4.0.4 stock ROM from samfirmware.com and flash it using Heimdall with repartition checked. This is what worked for me when nothing else did. I was using Linux, but there is Heimdall for windows. Make sure you install Heimdall and Heimdall frontend as the frontend makes it a lot easier. Run the frontend for the above steps.
Sent from my SGH-T989
Click to expand...
Click to collapse
thank you so much for the help! but can you provide me the link for heimdall! as i can't find it! and how to use it?
rahul8040 said:
thank you so much for the help! but can you provide me the link for heimdall! as i can't find it! and how to use it?
Click to expand...
Click to collapse
http://glassechidna.com.au/heimdall/
There are good videos on YouTube, but basically decompress the tar file to get more files. All the file names match the names in Heimdall except modem which I believe is amss.bin.
Sent from my SGH-T989
jrc2 said:
http://glassechidna.com.au/heimdall/
There are good videos on YouTube, but basically decompress the tar file to get more files. All the file names match the names in Heimdall except modem which I believe is amss.bin.
Sent from my SGH-T989
Click to expand...
Click to collapse
ok. i downloaded it but i have a new version which does support only 1 file format and that is *.tar.gz but i have *.tar.MD5 and i cant find a software to convert it..and when i did with 7zip heimdall frontend showed me an an error of firmware.xml missing and i saw that it didn't even recognised my device too as in zadig there was no samsung usb composite option there was jsut some other option and i installed drivers there :/ (no, idea why i did that) so, i really want ur help in this please help me revive it i am using win 8.1 ''
so, basically phone not getting detected in frontend
and zadig cant install Samsung usb composite drivers if u can give me a link for that
and software for converting or any other wat for eonverting *.tar.MD5 to *.tar.gz pleaseee HELP!!
rahul8040 said:
ok. i downloaded it but i have a new version which does support only 1 file format and that is *.tar.gz but i have *.tar.MD5 and i cant find a software to convert it..and when i did with 7zip heimdall frontend showed me an an error of firmware.xml missing and i saw that it didn't even recognised my device too as in zadig there was no samsung usb composite option there was jsut some other option and i installed drivers there :/ (no, idea why i did that) so, i really want ur help in this please help me revive it i am using win 8.1 ''
so, basically phone not getting detected in frontend
and zadig cant install Samsung usb composite drivers if u can give me a link for that
and software for converting or any other wat for eonverting *.tar.MD5 to *.tar.gz pleaseee HELP!!
Click to expand...
Click to collapse
I don't have a link for the drivers (I use Linux, so there is no need for drivers,) but a Google search should lead you in the correct direction. Also, make sure you run Heimdall as admin, or the device might not be recognized. To get the individual files, decompress the tar.md5 or .tar file.
You do not want to use "Load Package." Go to the flash tab. First try it without repartition checked. Use 4.0.4 from samfirmware.com with this pit file. I have an image below explaining everything hopefully.
I just saw the Windows 8.1 part. Windows 8 can sometimes cause problems with Odin, but it is worth trying Heimdall. If you have a Linux machine and Windows doesn't work, I would try that.
Related
I've looked through the entire official froyo thread with no luck. I cannot connect to kies no matter what i do, so i would like to use odin instead. Any help?
+1 add me to do list to I just cant connect to the kies no matter what i do...
rocketpaul said:
I've looked through the entire official froyo thread with no luck. I cannot connect to kies no matter what i do, so i would like to use odin instead. Any help?
Click to expand...
Click to collapse
Seems like SamFirmwares will post it tonight.
Check : http://twitter.com/SamFirmware
Do not update JHC with Odin.
If you do, you will never again get straight updates from Kies..
Also current rom will not start properly if updated with Odin (unless "modified").
Working on it.
oh i see, thanks
@Richthofen .. It is safe to do it with Kies ? Do you know the status of JPC ..Is it a near finished Froyo release , or also just antoher early testrelease ?
Richthofen said:
Do not update JHC with Odin.
Click to expand...
Click to collapse
JHC? The froyo one is JPC.
Bandis710 said:
@Richthofen .. It is safe to do it with Kies ? Do you know the status of JPC ..Is it a near finished Froyo release , or also just antoher early testrelease ?
Click to expand...
Click to collapse
Seems to me to be a more stable (however still a beta) firmware. JIT isn't enabled (when it is we'll see real speed boosts).
INeedYourHelp said:
JHC? The froyo one is JPC.
Click to expand...
Click to collapse
JPC sorry
ht*p://forum.xda-developers.com/showpost.php?p=7914733&postcount=525
Released.
shange said:
Seems like SamFirmwares will post it tonight.
Check : http://twitter.com/SamFirmware
Click to expand...
Click to collapse
It seems the samfirmware website is still not working, anybody else get this to work?
did anyone test flashing that with odin yet?
Well I've just looked at and I can't see how this can work with odin... the only file in the archive is an add_jpc.tar, and then when that is opened in winrar, it contains 5 files:-
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
zImage
ETA: OK I can open the cache.rfs and factoryfs.rfs files in 7zip but still they dont contain the files needed AFAICT.
If its anything like older versions you put add_jpc.tar as the PDA file.
EDIT: Like that
Majkysek said:
I have just flashed my i9k via Odin. Just put out SIM, go to dwnld mode, connect to Odin, stock in 512.pit and file add_jpc, which is possible to download few sites later and flash. Everything seem to work fine till now for me
PS: I have 2.2, when i looked in settings and its pretty fast
Click to expand...
Click to collapse
That's a pretty standard layout, all the files are just rolled into one huge tar file. Someone says flashing that tar with 512 pit worked for them
http://forum.xda-developers.com/showpost.php?p=7915986&postcount=578
Richthofen said:
Do not update JHC with Odin.
If you do, you will never again get straight updates from Kies..
Also current rom will not start properly if updated with Odin (unless "modified").
Working on it.
Click to expand...
Click to collapse
don't understand? If it doesn't work, all you need is to flash back older /workable firmware.
Fornowagain said:
If its anything like older versions you put add_jpc.tar as the PDA file.
EDIT: Like that
Click to expand...
Click to collapse
Thats what I am trying now, cheers.
I am always used to there being seperate files in odin.
i just flashed my add_jpc.tar as PDA file , without any pit , with Odin ...all is ok if someone need the rom i can post it , just tell me where and how to upload
reziel73 said:
i just flashed my add_jpc.tar as PDA file , without any pit , with Odin ...all is ok if someone need the rom i can post it , just tell me where and how to upload
Click to expand...
Click to collapse
That's good to know, although I'm going to wait for Richthofen to come back. Btw, the file is already available > http://www.multiupload.com/GEA547U9PT I have the JPD version as well from the FUD server and it's the same.
Okay, tried to update via odin - fail. It seems that firmware flashes, but during boot cant mount DBDATA
Hi,
I am trying to flash stock ROM on GT-n5100 with no success. I will first recap what I did:
1. Tried to flash N5100XXBMD1 EUR version from samsung-updates with odin and it failed with invalid volume size
2. Recovery was not working, I flashed CWM and recovery mode was still not working, only the gt-n5100 logo.
3. Flashed stock recovery, and recovery mode still not accesible, stuck in the same logo.
4. After flashing recovery, device booted in normal android. Tried to root using galaxy note 8.0 toolkit 1.1 and insecure boot method and now the device doesn't boot at all, it gets stuck in gt-n5100 logo.
5. I can enter download mode, but every stock firmware I try to flash fails with invalid volume size message on the tablet.
So, I think I may have a problem with the partitioning. I may have got broken somehow. Does someone have the pit file for N5100XXBMD1 ? or a 3 part stock firmware I can try to flash?
The pit file can be extracted from a working n5100 using Heimdall Suite in download mode. Maybe I can use a .pit file from another n5100 running N5100XXBMD1 ?
Also can you please tell if I'm doing something wrong? I double and triple checked all options in Odin.
Thank you.
aditzu_juice said:
Hi,
I am trying to flash stock ROM on GT-n5100 with no success. I will first recap what I did:
1. Tried to flash N5100XXBMD1 EUR version from samsung-updates with odin and it failed with invalid volume size
2. Recovery was not working, I flashed CWM and recovery mode was still not working, only the gt-n5100 logo.
3. Flashed stock recovery, and recovery mode still not accesible, stuck in the same logo.
4. After flashing recovery, device booted in normal android. Tried to root using galaxy note 8.0 toolkit 1.1 and insecure boot method and now the device doesn't boot at all, it gets stuck in gt-n5100 logo.
5. I can enter download mode, but every stock firmware I try to flash fails with invalid volume size message on the tablet.
So, I think I may have a problem with the partitioning. I may have got broken somehow. Does someone have the pit file for N5100XXBMD1 ? or a 3 part stock firmware I can try to flash?
The pit file can be extracted from a working n5100 using Heimdall Suite in download mode. Maybe I can use a .pit file from another n5100 running N5100XXBMD1 ?
Also can you please tell if I'm doing something wrong? I double and triple checked all options in Odin.
Thank you.
Click to expand...
Click to collapse
i got invalid volume size error on S III by Kies
then i flashed rom by Odin
so i suggest u first update or recover ur phone with kies and then flash another ROM by Odin
however restart PC and phone can help sometimes & also change USB port
:good:
x102x96x said:
i got invalid volume size error on S III by Kies
then i flashed rom by Odin
so i suggest u first update or recover ur phone with kies and then flash another ROM by Odin
however restart PC and phone can help sometimes & also change USB port
:good:
Click to expand...
Click to collapse
I tried to recover from Kies but the device is in download mode and it doesn't appear in kies emergency recovery. I will try from another PC/USB port tomorrow and post the result.
aditzu_juice said:
I tried to recover from Kies but the device is in download mode and it doesn't appear in kies emergency recovery. I will try from another PC/USB port tomorrow and post the result.
Click to expand...
Click to collapse
Tried from a different PC and same problem from Odin "Invalid volume size".I can't seem to find the serial number on the device to use Kies Firmware Initialization, but as I recall, yesterday when Android booted, Kies said that initialization is not supported for this device.
Anyway, can anyone extract the pitfile from their n5100? Or give me a serial number that works in Kies?
Thank you.
aditzu_juice said:
Tried from a different PC and same problem from Odin "Invalid volume size".I can't seem to find the serial number on the device to use Kies Firmware Initialization, but as I recall, yesterday when Android booted, Kies said that initialization is not supported for this device.
Anyway, can anyone extract the pitfile from their n5100? Or give me a serial number that works in Kies?
Thank you.
Click to expand...
Click to collapse
I checked from Kies with the serial number that I got from the box and it says "GT-N5100 does not support initializing".
Can someone with a N5100 extract the .pit file from it's tablet? It would be very helpful. I can guide you through the process using Heimdall 1.3.1. It is done in download mode.
Also if anyone has another idea on how to revive this tablet I would really appreciate it.
aditzu_juice said:
I checked from Kies with the serial number that I got from the box and it says "GT-N5100 does not support initializing".
Can someone with a N5100 extract the .pit file from it's tablet? It would be very helpful. I can guide you through the process using Heimdall 1.3.1. It is done in download mode.
Also if anyone has another idea on how to revive this tablet I would really appreciate it.
Click to expand...
Click to collapse
For anyone that can help me with this .pit file, It will not harm your tablet in any way. The procedure does not write anything to your tablet, You just nee to install Heimdall Suite on your pc, put the tablet in download mode, connect it and the app has a buton that says Download .pit file.
aditzu_juice said:
For anyone that can help me with this .pit file, It will not harm your tablet in any way. The procedure does not write anything to your tablet, You just nee to install Heimdall Suite on your pc, put the tablet in download mode, connect it and the app has a buton that says Download .pit file.
Click to expand...
Click to collapse
I guess no one has a couple of minutes to extract a .pit file from it's N5100
Ok then. I'll look into the option of sending the tablet to Samsung. Too bad I can't get help here, but at least I tried.
aditzu_juice said:
I guess no one has a couple of minutes to extract a .pit file from it's N5100
Ok then. I'll look into the option of sending the tablet to Samsung. Too bad I can't get help here, but at least I tried.
Click to expand...
Click to collapse
If you still need it, am happy to help if you give me your contact details
KXMWM said:
If you still need it, am happy to help if you give me your contact details
Click to expand...
Click to collapse
Thank you. I you have the pit file then I could use it. Can you post it here, maybe if anybody else has this problem will find it in the thread.
Hi,
did anyone send the pit file. I am in same condition and need it desperately.
nevermind, I solved the issue without a pit file
.pit file for gt-n5100 needed
KXMWM said:
If you still need it, am happy to help if you give me your contact details
Click to expand...
Click to collapse
Hello,
few days a go i flashed a new kernel on my note 8.0 and now it is soft bricked. You are my only hope to get that .pit file.
is it possible to get it from you please?
Thanks in advance
---------- Post added at 02:48 PM ---------- Previous post was at 02:42 PM ----------
mrmrmrmr said:
Hi,
did anyone send the pit file. I am in same condition and need it desperately.
nevermind, I solved the issue without a pit file
Click to expand...
Click to collapse
Do you mind telling us how did you solved your problem?? Thanks
useer said:
Hello,
few days a go i flashed a new kernel on my note 8.0 and now it is soft bricked. You are my only hope to get that .pit file.
is it possible to get it from you please?
Thanks in advance
---------- Post added at 02:48 PM ---------- Previous post was at 02:42 PM ----------
Do you mind telling us how did you solved your problem?? Thanks
Click to expand...
Click to collapse
i am uploading pit file and partition output from heimdall, its from version 4.2.2
hi
this img how it works?
I have a samsung galaxy s3 (3 mobile UK).. that is rooted and CWM installed
it was working just fine when it suddenly stuck while running, i pulled out battery and reinserted.... then it started restarting at 3 mobile logo screen but after a while it started to restart just after showing samsung logo..... at first it was going to cwm recovery but now it dont .... i am running icecream sandwich ....
i tried to update it to jelly beans using odin 3.07 with firmware XXEMD2...but NAND failed .... chanding port, restarting computer tried with no success
STUCK .... help..>!!!!!!
aadil.m said:
I have a samsung galaxy s3 (3 mobile UK).. that is rooted and CWM installed
it was working just fine when it suddenly stuck while running, i pulled out battery and reinserted.... then it started restarting at 3 mobile logo screen but after a while it started to restart just after showing samsung logo..... at first it was going to cwm recovery but now it dont .... i am running icecream sandwich ....
i tried to update it to jelly beans using odin 3.07 with firmware XXEMD2...but NAND failed .... chanding port, restarting computer tried with no success
STUCK .... help..>!!!!!!
Click to expand...
Click to collapse
Can the phone still boot into Download mode?
yup
altrikdout21 said:
Can the phone still boot into Download mode?
Click to expand...
Click to collapse
yes.... thats the only thing that my fone goes to
aadil.m said:
yes.... thats the only thing that my fone goes to
Click to expand...
Click to collapse
Download the appropriate zip for your carrier from this link http://forum.xda-developers.com/showthread.php?t=1739426 and then flash with odin. Keep in mind the person that hosted these hosted them on a website with incredibly slow download times. It often cuts out on you too, so make sure at the end of the download the file size is right. You may have gotten a bad download earlier.
If I have helped, slap that thanks button
aeppacher said:
Download the appropriate zip for your carrier from this link http://forum.xda-developers.com/showthread.php?t=1739426 and then flash with odin. Keep in mind the person that hosted these hosted them on a website with incredibly slow download times. It often cuts out on you too, so make sure at the end of the download the file size is right. You may have gotten a bad download earlier.
If I have helped, slap that thanks button
Click to expand...
Click to collapse
but but the link you provided is to root my device ..... and it does not include 3 mobile company
not to flash :-s
Save the phone
aadil.m said:
but but the link you provided is to root my device ..... and it does not include 3 mobile company
not to flash :-s
Click to expand...
Click to collapse
Hi , please go to the sammobile site and choose your exact firm.
Download it and extract it,
Use odin to flash it.
aadil.m said:
but but the link you provided is to root my device ..... and it does not include 3 mobile company
not to flash :-s
Click to expand...
Click to collapse
sorry assumed you wanted root. Just go to sammobile and download a firmware http://www.sammobile.com/firmwares/1/ just put in your phone's info.
Slap that thanks button if I helped
aeppacher said:
sorry assumed you wanted root. Just go to sammobile and download a firmware
Slap that thanks button if I helped
Click to expand...
Click to collapse
it dint work
NAND failed in odin
thaanks for ur help
aadil.m said:
it dint work
NAND failed in odin
thaanks for ur help
Click to expand...
Click to collapse
I would recommend installing kies from samsung and trying to flash the firmware with them. That should fix it no matter what and make sure that you do have the right drivers installed. Also make sure you have the right version of odin running. Here is download link for kies on PC (I assume you have PC) http://downloadcenter.samsung.com/content/SW/201306/20130612104232657/KiesSetup.exe just install, plug your phone in and hopefully it recognizes it. Even if it doesn't, it might install some drivers that make odin work. Let me know if it fixes it
aeppacher said:
I would recommend installing kies from samsung and trying to flash the firmware with them. That should fix it no matter what and make sure that you do have the right drivers installed. Also make sure you have the right version of odin running. Here is download link for kies on PC (I assume you have PC) just install, plug your phone in and hopefully it recognizes it. Even if it doesn't, it might install some drivers that make odin work. Let me know if it fixes it
Click to expand...
Click to collapse
samsung kies dont detect the device... its says device not responding, reboot ur device
odine says same thing ... NAND failed....
went to software specialist shop locally.... even he cannot fix the device
whats wroooooooooooooooong!!!
should i go for re-partition my device with PIT file??
Hhhhheeeeeeeeeeeeeeellllllllllllllpppppppppppppppp!!!
tried to repatition with PIT but failed it says
"there is no pit partition"
aadil.m said:
samsung kies dont detect the device... its says device not responding, reboot ur device
odine says same thing ... NAND failed....
went to software specialist shop locally.... even he cannot fix the device
whats wroooooooooooooooong!!!
should i go for re-partition my device with PIT file??
Click to expand...
Click to collapse
similar issue, last post on first page might help http://forum.xda-developers.com/showthread.php?t=1846867
Hi Everyone,
My phone is bricked : it is stucked in the white samsung LOGO. so I flashed it with its official firmware and still the same probleme
I read a lot of threads and came to this conclusion ... I need to flash it again but with the PIT file this time
My problem is that I don't know where to get it and if there is as many pit files as many firmware version so I need to be carefull wich one to pick.
Any Help is welcome !
hy,
try this link http://forum.xda-developers.com/showthread.php?t=2465460
on the post #6
b0g said:
hy,
try this link http://forum.xda-developers.com/showthread.php?t=2465460
on the post #6
Click to expand...
Click to collapse
Thanks for your reply ... you are telling me that the pit file that worked for the nexus 7 will work for my s4 mini?
b0g said:
hy,
try this link http://forum.xda-developers.com/showthread.php?t=2465460
on the post #6
Click to expand...
Click to collapse
Do I need to download all the archive ? ... you do not have only the PIT file ?
oualibadr said:
Do I need to download all the archive ? ... you do not have only the PIT file ?
Click to expand...
Click to collapse
the arhive is only for s4 mini (i9195),
for only pit file, check attachament
b0g said:
the arhive is only for s4 mini (i9195),
for only pit file, check attachament
Click to expand...
Click to collapse
Thkx BOG ... I just tried the thing and it didn't work : I flashed the sotck firmware supposed to be in my phone with the PIT file you gave and still stucked in the boot screen
Actually I'm not able to enter recovery mode, only download mode.
Any Idea?
oualibadr said:
Thkx BOG ... I just tried the thing and it didn't work : I flashed the sotck firmware supposed to be in my phone with the PIT file you gave and still stucked in the boot screen
Actually I'm not able to enter recovery mode, only download mode.
Any Idea?
Click to expand...
Click to collapse
Flash this file without pit and factory reset.
https://db.tt/1E0VaojE
And try to enter recorvery mode and do the factory reset. And then turn off the phone and flash your offical rom.
Küldve az én GT-I9195-ről Tapatalk 4 használatával
oualibadr said:
Thkx BOG ... I just tried the thing and it didn't work : I flashed the sotck firmware supposed to be in my phone with the PIT file you gave and still stucked in the boot screen
Actually I'm not able to enter recovery mode, only download mode.
Any Idea?
Click to expand...
Click to collapse
Did you resolve your issue???
I have the same issue, my phone stucked in the boot screen with the Samsung logo, but, before this, I have a message up on the left side of the screen: Set warranty bit: kernel
If anybody could help me, I will apreciate a lot!!:good:
marselcj said:
Did you resolve your issue???
I have the same issue, my phone stucked in the boot screen with the Samsung logo, but, before this, I have a message up on the left side of the screen: Set warranty bit: kernel
If anybody could help me, I will apreciate a lot!!:good:
Click to expand...
Click to collapse
Hi,
No it didn't work. I tried to flash a lot of boot files and firmwares ... And inthe last try my phone switched off in te middle of the process without wanting to switch on again: hard brick!!
Since your phone is still able to switch on and enter recovery mode ... I recommand to let the nearest samsung store deal whit it.
Good luck
Hi
Whit cmd on terminal emulator attached #1 we can create the pit file (not good for devices 32 GB). I made it. We have it on Sdcard.
It is out.pit inside out.zip.
The PitMagic is appl to extract the pit file on Windows Pc. Choice PIT file Analysis and open the file. Only to verify if the Pit is alright (this out.pit is) and have a listing if is good.
PIT_Analyses is the listing from the Pit File created on my S4 Mini I9195. The partition number is the "identifier".
I made this but never tried it. If you want try at Your risk, my out.pit created.
WOW
@radicspeter
I actually love you!! You saved my life, It worked straight away for my I9195 and super fast too
Thanks!
User radicspeter save my phone too. Thank You so much!
radicspeter said:
Flash this file without pit and factory reset.
https://db.tt/1E0VaojE
And try to enter recorvery mode and do the factory reset. And then turn off the phone and flash your offical rom.
Küldve az én GT-I9195-ről Tapatalk 4 használatával
Click to expand...
Click to collapse
Thank you so much ! You helped me recovering my phone
NaiNai said:
@radicspeter
I actually love you!! You saved my life, It worked straight away for my I9195 and super fast too
Click to expand...
Click to collapse
I'm happy see you too
mersonfufu said:
User radicspeter save my phone too. Thank You so much!
Click to expand...
Click to collapse
fish72 said:
Thank you so much ! You helped me recovering my phone
Click to expand...
Click to collapse
radicspeter said:
Flash this file without pit and factory reset.
https://db.tt/1E0VaojE
And try to enter recorvery mode and do the factory reset. And then turn off the phone and flash your offical rom.
Küldve az én GT-I9195-ről Tapatalk 4 használatával
Click to expand...
Click to collapse
Can use this on I9195 4.4.2
2010radams said:
Can i use your pit file if i have a I9195 that is on 4.4.2?
Click to expand...
Click to collapse
Of course!
Hi, it is possible to create a pit file to have more space in interial memory? In my second phone Galaxy s2 (16Gb) I "put" pit file with 6GB. And from this time I do not have any problem to install everything i wont. For s4 mini LTE 8GB it is possible?
Hi,
I noticet it was possible through this thread to obtain a pit file for the S4 mini to restore factory settings.
I need a pit file too but modified using the combination of internal storage+SD card.
I created a thread for this:
http://forum.xda-developers.com/gal...5-pit-file-t3199645/post62789202#post62789202
I was told to use pit magic but I do.not know how to use it well.and hot to.combine both media.
Can someone please help me out reaching my goal?
Unfortunately, till I do not get this pit file (proper and reliable) I vlcannot installed/upgrade to Lollipop.
Thank you
Hi!
I'm having the same problem of the first post with my GT-I9195, could someone help me? i've tried a lot of firmwares and nothing helped me, could someone help me?
I created a thread to this: http://forum.xda-developers.com/gal...s-s4-mini-gt-i9195-loop-t3224190#post63283046
Phone is bricked , Samsung S4 mini gt-i9195 LTE (for no reason , its not rooted , and have the official rome) , when connect in pc did not recognised olny as QHSUSB_device , after some search i see the trick with microSD to enter in download mode and know iam stock heare ...
In first try , i download the official rom for my phone (and region) but whet i try to sent it from odin i get error on partision , after that i search and find that i need pit file to re partition , i try diferend filles but nothing work .
Now i get this on odin
odin errror : <ID:0/005> There is no PIT partition.
and on phone screen
SECURE CHECK FAIL : PIT
ODIN: flash read failure
SO i need pit file now....
SOLVED
Hi!
I'm new here. I managed to flash a twrp recovery that didn't play well with my tablet. I tried to flash the stock ROM with Odin, but the operation failed do to fail (size), which I have read is due to need to repartition. DO any of you know how to get hold of the PIT-file for SM-T525? It is not easy to find on the internet.
Any help would be deeply appreciated!
/paunchygent
SOLVED
Found pit file! Now its just not booting properly.
Hi again. Found a working pit file after much ado. Managed to flash the stock rom with the partition table with a couple of % left on the battery. It is still not booting properly, but at least firmware and recovery is back in working order and the boot loop is gone.
If you download a multiple Firmware from Sammy, the PIT file is included in the CSC image.
So you can extracted from there.
bierma32 said:
If you download a multiparty Firmware from Sammy, the PipIT file is included in the CSC image.
So you can extracted from there.
Click to expand...
Click to collapse
Can you please explain this a bit more in detail? Want to flash Stock-FW via ODIN, but get fail because of size of hidden.img.ext4.
From what I read until now - guess I need to flash it with a PIT. But where to get the PID file ?
What do you mean with multiparty FW. I just know source sammobile, where I can download different versions ....
---------- Post added at 02:00 PM ---------- Previous post was at 01:51 PM ----------
paunchygent said:
Hi again. Found a working pit file after much ado. Managed to flash the stock rom with the partition table with a couple of % left on the battery. It is still not booting properly, but at least firmware and recovery is back in working order and the boot loop is gone.
Click to expand...
Click to collapse
Where did you get it from? I need this too.
@starbright_
Here are the link for the Download tool. Fast download from Sammy Servers.
If you check binary nature, you will download a multiple FW with Modem, CSC , Phone and Bootloader file.
Now unzip the CSC .image and you have got the PIT file for this Rom and your Tab.
@starbright_
I forget to add the link : https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Had this tool already, but the hint "binary" was important.
Nevertheless - it still doesn't work. It tried this Odin methods (see below), both fail. No idea what is the problem !?!?
After booting into download I get this message at screen: Is this normal?
Current binary Custom
Current status: Custom
Knox: 0
Warranty: 1
Qualcom Secure Boot: enable
AP SWREV: S1 T1 R1 A1 P1
Write Protection: Enable
UDC Start
starbright_ said:
this Odin methods (see below)
Click to expand...
Click to collapse
I'd try the second method (4 files) again, but:
- No pit is necessary (it's in the CSC and Odin will apply it automatically).
- Uncheck "repartition" and "f. reset time" before flashing.
bbsc said:
I'd try the second method (4 files) again, but:
- No pit is necessary (it's in the CSC and Odin will apply it automatically).
- Uncheck "repartition" and "f. reset time" before flashing.
Click to expand...
Click to collapse
I can't believe - it passes.
What the f... !! I can't see why this works and others not. Anyhow - thank you so much.
starbright_ said:
I can't believe - it passes.
What the f... !! I can't see why this works and others not. Anyhow - thank you so much.
Click to expand...
Click to collapse
I think you was trying to apply a wrong pit.
That "50M_HIDDEN" in the filename stands for something, I guess
bbsc said:
I think you was trying to apply a wrong pit.
That "50M_HIDDEN" in the filename stands for something, I guess
Click to expand...
Click to collapse
Mh, but this is the Pit I could grab out of the binary download. So it has been a part of the image.
starbright_ said:
this is the Pit I could grab out of the binary download
Click to expand...
Click to collapse
Out of that very "binary download" you was trying to flash?
Strange...
It looks like you was trying to flash "EUR" image and the separate pit-file was from "DBT" (German) image.
Isn't that right?