Related
Good news for all you Proclip fans,
I just recieved mine today and it works with the Samsung Extended battery just as well as the standard battery. There is a 1/2 in space behind the phone that should allow for even the most extreme extended batteries to fit as long as the battery cover does not extend beyond where the original battery cover fits (like if it wraps around the side of the phone it will not fit).
I ordered Proclip part number 513331 (Hard wired install).
Proclip doesn't disappoint either, this mount is just as awesome as the one for my old DINC. Nice and sturdy.
I'll post some pics later when I get it installed.
As is typical with proclip mounts, the mount is designed based on the physical dimensions of the phone (specifically the sides of the phone) so cases that change those dimensions will cause the phone to not fit in the grooves correctly.
Pix of the proclip in action
Grabbed a couple of pics for anyone interested.
Looks good, I had the incredible one too, but imo it was a little to hard to get in and out. Unfortunately since I already chipped my phone, I'm too scared to go naked with this phone. Plus their price is just too high for me.
Sent from my Galaxy Nexus using xda premium
T-Keith said:
Looks good, I had the incredible one too, but imo it was a little to hard to get in and out. Unfortunately since I already chipped my phone, I'm too scared to go naked with this phone. Plus their price is just too high for me.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I wont argue that they are spendy - I already had the base part but it's like $100 for both pieces for newbies.
But I do get something that no other mount has been able to offer me - this one is wired into the car, I can use only one hand to put my phone in it, and it doesn't fall or move when I press too hard. Considering the Verizon one is $40 and a POS it seemed worth the extra.
But yea if you have a case it's not so good.
does you phone fall if you turn the screen for navigation ?
I just ordered Proclip's adjustable mount 875214. Hopefully it will work well with my diztronic case. It grips near the bottom of the phone so it shouldn't interfere with any of the buttons or ports. I'll update after it arrives with the results!
roachdabug said:
I just ordered Proclip's adjustable mount 875214. Hopefully it will work well with my diztronic case. It grips near the bottom of the phone so it shouldn't interfere with any of the buttons or ports. I'll update after it arrives with the results!
Click to expand...
Click to collapse
Should be good, as it is adjustable. I wish they made the sides of the powered mount adjustable...
juju2lose said:
does you phone fall if you turn the screen for navigation ?
Click to expand...
Click to collapse
Nope, it stays in there really well.
roachdabug said:
I just ordered Proclip's adjustable mount 875214. Hopefully it will work well with my diztronic case. It grips near the bottom of the phone so it shouldn't interfere with any of the buttons or ports. I'll update after it arrives with the results!
Click to expand...
Click to collapse
Well for those who aren't aware, these Proclip holders come in 2 pieces: The first is a custom-fit bracket for your particular vehicle, and the other is the actual phone holder.
So let me start with the holder. The one I got is adjustable and holds my Galaxy Nexus with Diztronic case extremely well. It's snug but not difficult to remove, and leaves plenty of room behind the phone for the craziest of extended batteries. A+
Then there's the mounting bracket... I selected 853616 for my '07 Impreza. It hooked in behind the panel just fine and it is made of the same plastic as the holder which was nicer than I expected.
Unfortunately, it goes downhill from here: This particular bracket is a bad fit. All the angles are off, and as a result the adhesive backed sections do not contact the vehicle properly. Even if they did, the adhesive is so weak that I'm not sure it would stick. I'm going to have to pull it all apart and go to work with some thick double-sided adhesive tape of my own in order to deal with the gaps and get it installed properly. Not cool, especially considering the whole kit ended up costing me about $60. Now, there's lots of different brackets for lots of different cars out there, so your mileage may vary.
At any rate, it does a much better job holding the phone than my cupholder did.
Got mine a couple of days ago.
As has been noted, they come in two pieces. The piece that holds the phone is very, very nice and will definitely work with any reasonable extended battery. It's very snug, but not too snug, and the fit is perfect. I got one of the powered versions and it's fantastic.
The car mount piece, for me, is of similar quality. The fit is near stock and the thing is damn near impossible to remove.
As a unit, the two pieces are rock solid.
Highly recommended. I wouldn't hold out for the Samsung three pin holder. I had that same holder (minus the three pins, obviously) for my Nexus S - and this one is far, far, far better.
roachdabug said:
Well for those who aren't aware, these Proclip holders come in 2 pieces: The first is a custom-fit bracket for your particular vehicle, and the other is the actual phone holder.
So let me start with the holder. The one I got is adjustable and holds my Galaxy Nexus with Diztronic case extremely well. It's snug but not difficult to remove, and leaves plenty of room behind the phone for the craziest of extended batteries. A+
Then there's the mounting bracket... I selected 853616 for my '07 Impreza. It hooked in behind the panel just fine and it is made of the same plastic as the holder which was nicer than I expected.
Unfortunately, it goes downhill from here: This particular bracket is a bad fit. All the angles are off, and as a result the adhesive backed sections do not contact the vehicle properly. Even if they did, the adhesive is so weak that I'm not sure it would stick. I'm going to have to pull it all apart and go to work with some thick double-sided adhesive tape of my own in order to deal with the gaps and get it installed properly. Not cool, especially considering the whole kit ended up costing me about $60. Now, there's lots of different brackets for lots of different cars out there, so your mileage may vary.
At any rate, it does a much better job holding the phone than my cupholder did.
Click to expand...
Click to collapse
How snug of a fit is it? I have Verizon galaxy nexus with extended battery and Diztronic case. Does it take quite a bit of pressure to put it in the holder? Also, is the headphone jack open at the bottom?
Sent from my Galaxy Nexus
roachdabug said:
the adhesive backed sections do not contact the vehicle properly. Even if they did, the adhesive is so weak that I'm not sure it would stick. I'm going to have to pull it all apart and go to work with some thick double-sided adhesive tape of my own in order to deal with the gaps and get it installed properly.
Click to expand...
Click to collapse
That's what I had to do for my wife's Civic. She got the car mount that affixes to the center console and that one piece of double sided tape just wasn't cutting it. I used a heat gun to remove the factory tape and then liberally applied tape to all parts contacting the console. It's been holding steady for over a year.
Proclip should probably give people more sticky tape - but I think the reason they only use a single piece is because they tout that the proclip doesn't damage the car and it could be argued that uber liberal amounts of double-sided sticky tape could potentially damage some surfaces. In the civic it’s all plastic so it’s NBD to use a heat gun and remove any residue, but if was a BMW with an oak dash then I could see people complaining.
dgwood12 said:
How snug of a fit is it? I have Verizon galaxy nexus with extended battery and Diztronic case. Does it take quite a bit of pressure to put it in the holder? Also, is the headphone jack open at the bottom?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I don't think any case would work with the proclip because it is a very snug fit and yes it takes a fair amount of pressure to put it in. Not so much that it will move the dock but certainly enough to keep the phone from coming out accidentally.
The only reason the extended battery works is because there is nearly a 1 inch opening behind the phone and the battery cover does not extend to the edge.
Yes the headphone jack is open but you would need a connector that is straight. A 90 degree connector would not work.
Recently, I've been getting annoyed with using my Kenu Airframe/Samsung Car Mount having to keep slipping on and off buttons or pushing my mount aside to slip in my phone.
So, I've been reading about the magnetic feature in order to activate the Car Mode/Desktop Mode on our Moto X. So I attempted to build a Magnetic Car Mount this weekend.
I realized that the Moto X itself had a metal band that would activate the Car Mode, however it wasn't strong enough to hold with my Magnet, so I had to place metal plate into a case and put the phone in, which that worked flawlessly. However, the metal plate bulged everywhere so the phone wasn't nice to hold anymore.
Luckily, my dad is a welder, and I worked on molding the metal plate with him, and decided I disliked my Diztronic Frost Case (On the side note, I liked the Matte Black Best). So, I decided to cut a piece out of my Diztronic case that fit with my metal plate. So now the plate curved with the case!
I inserted the metal plate into the cut out, glued it in place, and my roughly build case with a metal plate works like a charm with my Magnetic Mount setup with my Kenu Airframe. I gotta say it's one of the nicest things not to have to fiddle with anything and just take your phone off with a quick snap. This all cost me about $5 + $25 (Which is the Airframe). I'm ordering a new case and Mountek Metal Plating to reduce the thickness hoping that I won't have to cut an insert, but we'll see in the following days. I'll update it when I receive the plates.
I went autocrossing with my car, phone mounted my magnetic mount and at speeds and curves of 60-70 MPH, this thing stuck like glue!
Very pleased overall. Hopefully some of you guys will steer clear from the Griffin Dock for our phones and custom build your own mount
Can you post a pic of it in action?
Sent from my XT1080 using Tapatalk
1454 said:
Can you post a pic of it in action?
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Here a few, sorry they are definitely blurry. Fairly tired for the night, tried to get a quick snaps in for an idea. Can't wait when I get my kit together to make everything look professional.
The Kenu can turn 360 degrees to fit whatever direction you'd like the magnet/a device to face. It's held on your air vent.
https://www.dropbox.com/sh/tmb0izdpeylz41u/cMXKcCgPcO
Kenichi said:
Here a few, sorry they are definitely blurry. Fairly tired for the night, tried to get a quick snaps in for an idea. Can't wait when I get my kit together to make everything look professional.
The Kenu can turn 360 degrees to fit whatever direction you'd like the magnet/a device to face. It's held on your air vent.
https://www.dropbox.com/sh/tmb0izdpeylz41u/cMXKcCgPcO
Click to expand...
Click to collapse
One more question. Any adverse effects from the magnet on the builtin compass or Navi? I've seen other places were people had issues with the magnet setups on those functions. Just wanted to see your thoughts.
Sent from my XT1080 using Tapatalk
1454 said:
One more question. Any adverse effects from the magnet on the builtin compass or Navi? I've seen other places were people had issues with the magnet setups on those functions. Just wanted to see your thoughts.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I use a digital speedometer/Navigation day to day, haven't had any negative affects that I've seen yet. Speedometer/GPS Speed is right on my Digital Odometer's value, so I can't say I have any issues yet. Let me know if you have any other questions! :laugh: Plus the location of my metal plate in the pictures taken, I am still able to do NFC!
Just got my parts in today for thinner pieces of metal, integrated it into a few of my cases. Plus, I made a new magnet. Quite fun!
Kenichi said:
I use a digital speedometer/Navigation day to day, haven't had any negative affects that I've seen yet. Speedometer/GPS Speed is right on my Digital Odometer's value, so I can't say I have any issues yet. Let me know if you have any other questions! :laugh: Plus the location of my metal plate in the pictures taken, I am still able to do NFC!
Just got my parts in today for thinner pieces of metal, integrated it into a few of my cases. Plus, I made a new magnet. Quite fun!
Click to expand...
Click to collapse
Thanks for all the answers and sharing. The community is great because of people like you.
Sent from my XT1080 using Tapatalk
1454 said:
Thanks for all the answers and sharing. The community is great because of people like you.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I have been using magnetic mounts since my OG Droid. It is nice to see Moto reverted back to magnetic activation of dock mode instead of their smartdocks. I have noticed Moto has switched the polarity of the magnet's activation of car/desk dock modes from the OG Droid. I have an RND dock at home that I glued a magnet to. It automatically activates Daydream when docked. My next project is modifying the RND dock to include HDMI out and USB OTG capability.
I've been thinking about creating my own wireless car dock. Basically I was thinking of using a case protector and trimming the edge off that locks the phone into the case to provide for easy insertion/removal from the "dock". On the back of the case I was going to cut an opening for the wireless charging transmitter...preferably one with magnets to assist with keeping the phone in place. Not sure if I'll just buy/use the Nexus 5 charger I currently have build my own. On the back of the charger I was going to attach one of the swiveling mounts which can then attach to one of the mounts similar to what the Pro.Fit mounting brackets and such use.
Any comments, concerns, better ideas?
sorry bro its been done.
The Air Dock
and the official website
http://www.theairdock.com/
undivide said:
sorry bro its been done.
The Air Dock
and the official website
http://www.theairdock.com/
Click to expand...
Click to collapse
Not really the same thing at all. The OP is looking for a solution that uses magnets. You could get a random car dock, trim any plastics past the ball joint to fit, epoxy a nexus wireless charger to it, and be done. That would work nicely.
did you even read anything about the air dock ?
you probably skipped over this part...
"Inside the Air Dock are magnets that pull the phone tightly into the foam face"
the FAQ also covers the nexus 5 & 7 + magnets
only reason I bothered posting the product is because the price seems reasonable when you consider how much it would cost to "rig up" something hack style which, in the end, would probably not function as well nor look as nice as the air dock does.
I realize the air dock exists...and it's $69. I already have numerous cases and Qi chargers I can use to do this. The only thing I really need is the swivel adapter and the bracket to install in the car. I think the air dock is great but I feel like I can create something very similar that would work just as good if not better and for less money. The way I look at it, the air dock is missing one thing that I would like just for my own piece of mind, especially since I drive in Pennsylvania a lot (and if you ever have driven in PA, you know you can practically lose your car in the potholes there). I like the idea of a case/surround that doesn't require it to "snap in" to but provides just enough support for a solid hit so it doesn't pop out/off. Basically my idea is very similar to the air dock except it includes a case around the charger part. The way I look at it, even if I were to buy everything to make this, I can still make it cheaper than the air dock. The "case" I would hack apart I can get as cheap as $10 or less, and I already have 3 spares. The charger can be had for around $12 (even if I want to buy just the coil and PCB) unless I want to spend a lot and get another nexus charger which is $50. The only other thing I need is the adapter and mount which is about $9-15. So I can make the same thing for as little as $31-$37.
hey man thanks for writing back ! yes I used to live in PA near philly, now I live south of wilmington DE, this winter has been hell ! my rearview mirror fell off 2 weeks ago from hitting a pothole so I see your concern. one of the reasons why I stopped mounting my phone in my car (used to have an iphone 5) I bought a cheap mount from walmart as you can see here they say the stickiness lasts awhile as long as you wet it when it starts to dry out however mine will no longer get its stick back so its worthless to me.
are you going to fix mount this to your dash, or suction cup it to your window ? the latter I would not recommend
I'm sure you've seen the ram mounts x-grip, it looks top notch and I think if I ever upgrade from the cupholder recess in my scion my phone would be so lucky to find its place there.
sometimes I rest it in front of my stereo so I dont have to look at the word "aux" while the music's on!
Pandages said:
Not really the same thing at all. The OP is looking for a solution that uses magnets. You could get a random car dock, trim any plastics past the ball joint to fit, epoxy a nexus wireless charger to it, and be done. That would work nicely.
Click to expand...
Click to collapse
That's exactly what I did just yesterday lol.. iMagnet dock with the Qi Nexus charger. The iMagnet dock has 4 strong mangets on the end, well I took those and put them on the plates that you're supposed to put in between a case and phone and glued them together to create a flat surface for the nexus charger.
It works perfect for me. Also had to order a charger to support the nexus charger.
iMagnet Dock
Car Charger
Truck is dirty, shhhh waiting for a nice day to clean it, damn you Michigan!
I know what I'm getting with my next paycheck
I just hope the magnet on that dock is strong enough to hold my phone through its fairly thick silicone case
ilikethepenkils said:
That's exactly what I did just yesterday lol.. iMagnet dock with the Qi Nexus charger. The iMagnet dock has 4 strong mangets on the end, well I took those and put them on the plates that you're supposed to put in between a case and phone and glued them together to create a flat surface for the nexus charger.
It works perfect for me. Also had to order a charger to support the nexus charger.
iMagnet Dock
Car Charger
Truck is dirty, shhhh waiting for a nice day to clean it, damn you Michigan!
Click to expand...
Click to collapse
That's pretty similar to what I want to do, although I was thinking of taking a Nexus 5 case and cutting a hole in the back and epoxying it to the charger two allow 2 things. One is to provide a little extra support for severe potholes and also to allow the wireless charger to sit directly on the phone maximizing the charge rate. I was going to cut the lip off around the edge of the case so the phone can just be placed into the case instead of snapping it in since the magnets will take care of the bulk of keeping the phone in place while the sides of the case will just provide extra support. Just an idea. If anything I'll start off with the same/similar thing as what you have and possibly add the case idea if I notice issues of slipping or popping off with pot holes.
As for how/where I was going to mount it (2009 Scion XB), I was thinking of either mounting near the stick shift or possibly to the right of the stereo. Either way I'd rather have something relatively close to the top of the dash. The stick shift would be too low but at least it's accessible if I need to take a quick glance at it.
undivide said:
I know what I'm getting with my next paycheck
I just hope the magnet on that dock is strong enough to hold my phone through its fairly thick silicone case
Click to expand...
Click to collapse
I have the Cruzerlite TPU cases. They've always served their purpose well for me at least. The magnets on the Nexus 5 Qi charger are pretty strong without a case. With the cruzerlite cases it's not quite as strong but it does hold a bit. Probably wouldn't hold well hitting a series of potholes though. I guess it also depends on how vertical it would be to. I would imagine it would have a better chance of breaking loose completely vertical as opposed to some angle to it.
ParadingLunatic said:
That's pretty similar to what I want to do, although I was thinking of taking a Nexus 5 case and cutting a hole in the back and epoxying it to the charger two allow 2 things. One is to provide a little extra support for severe potholes and also to allow the wireless charger to sit directly on the phone maximizing the charge rate. I was going to cut the lip off around the edge of the case so the phone can just be placed into the case instead of snapping it in since the magnets will take care of the bulk of keeping the phone in place while the sides of the case will just provide extra support. Just an idea. If anything I'll start off with the same/similar thing as what you have and possibly add the case idea if I notice issues of slipping or popping off with pot holes..
Click to expand...
Click to collapse
I live in an apartment complex with speedbumps.. Made the truck go about 40-ish and the phone didn't even budge.. so you should be good. lol
I know what I'm getting with my next paycheck
I just hope the magnet on that dock is strong enough to hold my phone through its fairly thick silicone case
Click to expand...
Click to collapse
My N5 is without case currently. Every case I have is too bulky and just eh, thinking about trying the poetic bumper one Ive seen on amazon..
I Made this
DIY wireless car charger: http://youtu.be/dDH2_auNWVs
It would actually be nice if there were a thread specifically for DIY Qi charger projects which included pics/plans etc. I guess creativity and the search feature will have to suffice for now.
I was also thinking of building my own Qi charger. I'd like my case to be much smaller though, similar to the Nexus 5 Qi charger. I was thinking of stacking the coil on top of the PCB but I'm not sure what shielding if any is required between the coil and the PCB.
If only that new NXP semiconductor solution were available right now. Check it out here. https://www.youtube.com/watch?v=50hjojLLDww. Nothing much you can do about the size of the coil, but that tiny PCB is freaking sweet.
ilikethepenkils said:
That's exactly what I did just yesterday lol.. iMagnet dock with the Qi Nexus charger. The iMagnet dock has 4 strong mangets on the end, well I took those and put them on the plates that you're supposed to put in between a case and phone and glued them together to create a flat surface for the nexus charger.
It works perfect for me. Also had to order a charger to support the nexus charger.
Click to expand...
Click to collapse
Bingo! This is exactly what I was suggesting. I think I'll wind up doing the same. I've got one of the CHOE Qi chargers at home, but it is magnet-less. I'm also picking up a PowerBot unit to throw on my desk at the office.
I think you'll find that using a case to hold the phone snugly is not only overkill but also a hassle. Magnets work great on their own, but having a rubbery surface makes it even better.
I have the Air Dock (see here) myself but am considering downsizing to an official Nexus 5 charger fixed to a ProClip (see here) This would not only be smaller but also sturdier. First I might affix the Air Dock itself to the ProClip and see if that satisfies me.
Definitely happy with the Air Dock, though. Great product. The guy making them is great as well.
active nfc, Qi & bluetooth car dock
Hi all, I''ve been messing about with different versions of this for months now, since i had my Nexus 4. When i changed my car last year, the new one came fitted with an active, adjustable Brodit/Proclip iPod dock and a Parrot bluetooth system
The first thing i did was removed the active ipod plug from the bottom of the mount and replaced it with a standard micro usb for the Nexus.
Then i added an nfc tag to trigger a LLama event to switch on bluetooth and start music playback when connected
I decided i didn't like the Parrot system so i removed it and went back to the Belkin Aircast Auto i had from my last car and routed all the cables behind the dash to the lighter socket
Then i thought i'd try a cheap "puck" Qi charger. The jaws on the old ipod mount are very deep and the puck fitted in behind the phone nicely, with the nfc tag on top (first pic). The phone charged well even while streaming bluetooth, but would only maintain charge while using bluetooth and Sat Nav. together, so i kept the option to unplug the Qi and use wired charging when i needed more juice. The charger was a little wider than the phone, hence the foam and slight "v" angle on the mount jaws to hold it firmly
So last week i ordered a new pull tab slip case for my phone and the one that arrived was too small, so i thought it was time to break the guts out of the Qi charger (unclip the 2 halves and remove 4 screws to release a one piece coil and circuit board) and tidy the mount up a bit.
I made a taller plastic backplate for the brodit mount, stuck the circuit board to it with mounting tape and stuck the nfc tag directly to the centre of the coil. Then i added packing to even out the thickness of the whole piece and altered the slip case so it would slide over everything while leaving an access flap so i can still use the wired charger cable when necessary (pics 2 & 3)
If this works well i'll rebuild the charging "sandwich" from better plastic to decrease the thickness a little, then i'll fit an extra lighter socket behind the stereo for the charger
Can anyone recommend a good car mount?
I just bought some cheesy magnetic thing from Amazon. Will be returning ASAP. Ideally, I think I'm looking for something that can clip into either the air vents or on the dash of my car. I realized there probably aren't many pixel specific accessories made yet, but maybe someone has had good success with a different model for an earlier phone?
Anyway just wondering what you all were planning on using.
I've been using a good magnetic mount for the CD slot in my car since the Nexus 5 days. I like the Koomus brand of them from Amazon.
Sent from my Pixel 2 XL using Tapatalk
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
I've had the third generation iOttie car mount for about a year, and it is excellent. It doesn't have a vent clip, but its suction cup mount is very sturdy. It even comes with a little pad you can use if your dash is textured.
I second the ProClip. You can get a custom mount for your vehicle, and select a separate holder. I've got a custom mount and a universal holder that can be adjusted if you switch phones.
I second the recommendations for iOttie mounts. I bought their wireless charging one back when I got my Galaxy S6, but I still use it with my Pixels because it is incredibly convenient to secure and remove the device. Excellent quality, usability, and adjustability, well worth the purchase.
coolsilver said:
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Looks like a solid product! I have an '09 Kia Spectra and the dash doesn't look like an easy place to put a phone mount. I checked out their custom mount for my car and the only drawback I can see is it completely covers a vent (for a/c) which may or may not be an issues, I won't know until mounted but.. Any experience with that for you?
Yea on my prior vehicle I had it cover the vent. It was out far enough so it still put out air but it wasn't really directional as far as flow as before. Center ones I didn't care as much about being pointed at me to keep cool. It was a solid bracket though
coolsilver said:
Yea on my prior vehicle I had it cover the vent. It was out far enough so it still put out air but it wasn't really directional as far as flow as before. Center ones I didn't care as much about being pointed at me to keep cool. It was a solid bracket though
Click to expand...
Click to collapse
Thanks! They do look solid ...
I have an existing car mount for my S7 before I got the XL, it holds the phone in landscape and squeezes the sides. Little concerned that this may not be good for the squeeze sensors. Anyone think it could affect the sensors over time?
I have this one since May 2016 no issues and easy off and on for various phones..I have vent but they make cd slot and I think window too
iOttie
https://www.amazon.com/gp/product/B017HME9DC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Sent using Tapatalk
Haven't used these myself, but they look pretty sweet...https://www.amazon.com/dp/B01DCSIRG0/ref=cm_sw_r_cp_awdb_KmO7zbB7T3BNE
Anybody used this one before?
Cowbell_Guy said:
Can anyone recommend a good car mount?
I just bought some cheesy magnetic thing from Amazon. Will be returning ASAP. Ideally, I think I'm looking for something that can clip into either the air vents or on the dash of my car. I realized there probably aren't many pixel specific accessories made yet, but maybe someone has had good success with a different model for an earlier phone?
Anyway just wondering what you all were planning on using.
Click to expand...
Click to collapse
Another vote for Proclip's mounting solution. The universal large holder works fine with my Pixel 2 XL with a (Caseology Parallax) case. It's pricey but it works beautifully.
I just ordered the IOAuto magnet holder to use with Proclip's mounting bracket. I'm tired of sliding my phone into the holder. 1st world problems, I know.
Sent from my Pixel 2 XL using Tapatalk
morbidhippy said:
I just ordered the iOttie magnet holder to use with Proclip's mounting bracket. I'm tired of sliding my phone into the holder.
Click to expand...
Click to collapse
How does that work exactly? Which iOttie did you buy, and how does it work with the ProClip bracket?
dberthia said:
How does that work exactly? Which iOttie did you buy, and how does it work with the ProClip bracket?
Click to expand...
Click to collapse
Oops, I meant IOAuto, not iOttie.
https://www.proclipusa.com/product/...xkJK2QwbcDyiiZdeiDsdvqZtMoM3Vg84aAjDOEALw_wcB
I bought the IOAuto Pro. It attaches to the vehicle mount that I purchased previously from Proclip. It comes with small circular metal disks that should be attached to your phone.
I hate the thought of using adhesive to stick anything on my phone so I'm going to try and place the disk between the phone and my TPU case. In think the magnet will still work fine.
Check out YouTube. I've seen a couple of videos of others installing it.
Sent from my Pixel 2 XL using Tapatalk
I like this simple magnetic holder:
Techmatte MagGrip Orbit Universal Air Vent Magnetic Car Mount Holder
It requires a thin metal plate which works fine if you use a TPU case or other case that's not too thick on the back; this way, it doesn't require any permanent application. I bought 3 for family members, and a friend got one after seeing mine. It's easy to mount, secure, very simple in design - it uses a steel ball that mounts to an air vent, and a magnetic piece that connects to the ball, giving easy adjustment in all directions, or complete removal. This magnetic piece connects to the phone's steel plate. My wife has an iphone 6P which works well; I have a nexus 5X.
coolsilver said:
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Adding a :good: for the ProClip. Mine just came yesterday and works perfect.
morbidhippy said:
I hate the thought of using adhesive to stick anything on my phone so I'm going to try and place the disk between the phone and my TPU case. In think the magnet will still work fine.
Click to expand...
Click to collapse
I'm curious to see if that works out for you. I'm intrigued, but it seems like $50 is a bit steep for that mount. If it works well for you with a case, I may consider it though.
I know my solution isn't going to be for everyone, but it works well for my needs. I have a hybrid Proclip/Ram Mount solution. Proclip for the center dash mount, then Ram Mounts for the rest (ball, short arm, and X Grip holder). It's more involved than the common solutions, but it puts my phone right whereIi want it and it's rock solid--which is important for those track days.
As mentioned upthread, this does partially block the vent, but on my Mustang not by too much, and the passenger still gets air flow when it's directed their way. A bonus is the phone stays nice & cool when staying on playing podcasts while commuting, or running the telemetry apps while on track.
I can strongly recommend this one. They're a little pricey but I have them in my truck, car, 4-wheeler and mountain bike. Just the spring clips are strong and when you add the rubber sling it'll hold on to the phone almost no matter what. This one actually fits my P2XL better than my PXL. https://www.amazon.com/gp/product/B0066BWMNU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
What is everyone using?
My old side spring grip style one isn't going to work. I love the thing but it either presses on the volume buttons or activates Assistant. Have any of you found one that works without these issues?
I'm considering one of the magnetic ones but I don't like the idea of having to add a piece of metal to the back of my case.
Any success stories?
I've been using this one since my pixel 1. Love it, the build is ridiculously solid, I'll probably never need to buy a mount ever again. It's only a few solid aluminum pieces. The metal plates you put on your case are very thin. The magnetic pull doesn't start until it literally gets to the plate. The plate doesn't look bad. But that's the only draw back I think. I'm happy with it though. Good luck!
I mounted mine on my window, my wife has hers on the dashboard. It's been about a year and is lasting very well. The mount shows no wear and tear.
https://clutchit.com
Sent from my Pixel 2 using Tapatalk
Izeltokatl said:
I mounted mine on my window, my wife has hers on the dashboard. It's been about a year and is lasting very well. The mount shows no wear and tear.
https://clutchit.com
Click to expand...
Click to collapse
That is pretty cool. Make a good Xmas gift too.
Izeltokatl said:
I've been using this one since my pixel 1. Love it, the build is ridiculously solid, I'll probably never need to buy a mount ever again. It's only a few solid aluminum pieces. The metal plates you put on your case are very thin. The magnetic pull doesn't start until it literally gets to the plate. The plate doesn't look bad. But that's the only draw back I think. I'm happy with it though. Good luck!
I mounted mine on my window, my wife has hers on the dashboard. It's been about a year and is lasting very well. The mount shows no wear and tear.
Sent from my Pixel 2 using Tapatalk
Click to expand...
Click to collapse
I really like the looks of those! Very clean.
Have you had any issues with the phone wanting to spin on the mount?
Thanks,
Jared
I'm waiting for my Pixel 2 to arrive, but I use a Spigen Magnetic Mount for my air vent currently. They offer a windshield/dash mount also. It holds very tight, but not too tight. No issue with the phone falling and/or rotating during driving.
I'm wondering if any of the Spigen cases will work without the need to put the metal plate inside. I currently have the metal plate inside the back cover of my Galaxy S5, but I can tell there is a bulge where it is placed.
I'm on the list to be notified when these release. By far the best holder charger combo I've ever used https://www.proclipusa.com/category/google-pixel-2
Can't tell you how disappointed when I popped my new phone into the dash mount only to watch the volume drop on it's own. The volume rocker placement on the Pixel 2 leaves a lot to be desired. I'm not a huge fan of magnets interfacing with computers to be honest. Hope I can find a decent alternative.
I use the Tetrax, both the Fix and Xway. Most of the time I use the Fix, because I like having my air vents actually blowing air on ME, but in the summer, on a long drive, using the GPS and charging the device, it can sometimes get warm. I just take it off the Fix, and move it to the air vent to let the air conditioner cool it down. I've used this system for nearly a decade, not sure if the Pixel 2 will get warm enough to need the air vent.
The only thing you need to put on the phone is a small metal button. The package comes with several sizes. I adhere this to my Spigen Thin Fit case, so it doesn't have to be attached to the actual phone.
http://store.tetrax.us/en_us/featured/tetrax-fix.html
http://store.tetrax.us/en_us/featured/xway.html
ClutchIT magnetic mount system.
krelvinaz said:
That is pretty cool. Make a good Xmas gift too.
Click to expand...
Click to collapse
I got two of these yesterday, one for me and another for a Xmas gift.
Works great. I have had co-workers, friends and family who have seen it, express interest in getting one for themselves.
I order 6 extra plates to go with each unit. It already comes with several extras. I have only used one plate so far because a allot of places I will use it are metal surfaces.
I put the thin disc on the back of my phone and put my case back on. Nothing to see until I actually use it.
Good mount.
https://clutchit.com
Ok
Brodit
Adjustable active Brodit + ProClip :good:
I started using the Scosche magnetic mount with my Pixel 2 and really like it. The metal plate on the phone is very thin and I can't see it since I have a black TPU case. If you don't use a case or have a transparent one, you'll need to be ok with being able to see that. I already had a mounting surface on my car so I just stuck the magnet to that. I haven't noticed the magnet doing anything funky to my phone.
Shibang said:
I started using the Scosche magnetic mount with my Pixel 2 and really like it. The metal plate on the phone is very thin and I can't see it since I have a black TPU case. If you don't use a case or have a transparent one, you'll need to be ok with being able to see that. I already had a mounting surface on my car so I just stuck the magnet to that. I haven't noticed the magnet doing anything funky to my phone.
Click to expand...
Click to collapse
I second this, I find the magnetic car mount is by far the best I've ever used, the one i previously used, used to activate active edge or turn volume down, which was quite annoying.
Scosche
I was using Scosche before Brodit.
awesome