I've been thinking about creating my own wireless car dock. Basically I was thinking of using a case protector and trimming the edge off that locks the phone into the case to provide for easy insertion/removal from the "dock". On the back of the case I was going to cut an opening for the wireless charging transmitter...preferably one with magnets to assist with keeping the phone in place. Not sure if I'll just buy/use the Nexus 5 charger I currently have build my own. On the back of the charger I was going to attach one of the swiveling mounts which can then attach to one of the mounts similar to what the Pro.Fit mounting brackets and such use.
Any comments, concerns, better ideas?
sorry bro its been done.
The Air Dock
and the official website
http://www.theairdock.com/
undivide said:
sorry bro its been done.
The Air Dock
and the official website
http://www.theairdock.com/
Click to expand...
Click to collapse
Not really the same thing at all. The OP is looking for a solution that uses magnets. You could get a random car dock, trim any plastics past the ball joint to fit, epoxy a nexus wireless charger to it, and be done. That would work nicely.
did you even read anything about the air dock ?
you probably skipped over this part...
"Inside the Air Dock are magnets that pull the phone tightly into the foam face"
the FAQ also covers the nexus 5 & 7 + magnets
only reason I bothered posting the product is because the price seems reasonable when you consider how much it would cost to "rig up" something hack style which, in the end, would probably not function as well nor look as nice as the air dock does.
I realize the air dock exists...and it's $69. I already have numerous cases and Qi chargers I can use to do this. The only thing I really need is the swivel adapter and the bracket to install in the car. I think the air dock is great but I feel like I can create something very similar that would work just as good if not better and for less money. The way I look at it, the air dock is missing one thing that I would like just for my own piece of mind, especially since I drive in Pennsylvania a lot (and if you ever have driven in PA, you know you can practically lose your car in the potholes there). I like the idea of a case/surround that doesn't require it to "snap in" to but provides just enough support for a solid hit so it doesn't pop out/off. Basically my idea is very similar to the air dock except it includes a case around the charger part. The way I look at it, even if I were to buy everything to make this, I can still make it cheaper than the air dock. The "case" I would hack apart I can get as cheap as $10 or less, and I already have 3 spares. The charger can be had for around $12 (even if I want to buy just the coil and PCB) unless I want to spend a lot and get another nexus charger which is $50. The only other thing I need is the adapter and mount which is about $9-15. So I can make the same thing for as little as $31-$37.
hey man thanks for writing back ! yes I used to live in PA near philly, now I live south of wilmington DE, this winter has been hell ! my rearview mirror fell off 2 weeks ago from hitting a pothole so I see your concern. one of the reasons why I stopped mounting my phone in my car (used to have an iphone 5) I bought a cheap mount from walmart as you can see here they say the stickiness lasts awhile as long as you wet it when it starts to dry out however mine will no longer get its stick back so its worthless to me.
are you going to fix mount this to your dash, or suction cup it to your window ? the latter I would not recommend
I'm sure you've seen the ram mounts x-grip, it looks top notch and I think if I ever upgrade from the cupholder recess in my scion my phone would be so lucky to find its place there.
sometimes I rest it in front of my stereo so I dont have to look at the word "aux" while the music's on!
Pandages said:
Not really the same thing at all. The OP is looking for a solution that uses magnets. You could get a random car dock, trim any plastics past the ball joint to fit, epoxy a nexus wireless charger to it, and be done. That would work nicely.
Click to expand...
Click to collapse
That's exactly what I did just yesterday lol.. iMagnet dock with the Qi Nexus charger. The iMagnet dock has 4 strong mangets on the end, well I took those and put them on the plates that you're supposed to put in between a case and phone and glued them together to create a flat surface for the nexus charger.
It works perfect for me. Also had to order a charger to support the nexus charger.
iMagnet Dock
Car Charger
Truck is dirty, shhhh waiting for a nice day to clean it, damn you Michigan!
I know what I'm getting with my next paycheck
I just hope the magnet on that dock is strong enough to hold my phone through its fairly thick silicone case
ilikethepenkils said:
That's exactly what I did just yesterday lol.. iMagnet dock with the Qi Nexus charger. The iMagnet dock has 4 strong mangets on the end, well I took those and put them on the plates that you're supposed to put in between a case and phone and glued them together to create a flat surface for the nexus charger.
It works perfect for me. Also had to order a charger to support the nexus charger.
iMagnet Dock
Car Charger
Truck is dirty, shhhh waiting for a nice day to clean it, damn you Michigan!
Click to expand...
Click to collapse
That's pretty similar to what I want to do, although I was thinking of taking a Nexus 5 case and cutting a hole in the back and epoxying it to the charger two allow 2 things. One is to provide a little extra support for severe potholes and also to allow the wireless charger to sit directly on the phone maximizing the charge rate. I was going to cut the lip off around the edge of the case so the phone can just be placed into the case instead of snapping it in since the magnets will take care of the bulk of keeping the phone in place while the sides of the case will just provide extra support. Just an idea. If anything I'll start off with the same/similar thing as what you have and possibly add the case idea if I notice issues of slipping or popping off with pot holes.
As for how/where I was going to mount it (2009 Scion XB), I was thinking of either mounting near the stick shift or possibly to the right of the stereo. Either way I'd rather have something relatively close to the top of the dash. The stick shift would be too low but at least it's accessible if I need to take a quick glance at it.
undivide said:
I know what I'm getting with my next paycheck
I just hope the magnet on that dock is strong enough to hold my phone through its fairly thick silicone case
Click to expand...
Click to collapse
I have the Cruzerlite TPU cases. They've always served their purpose well for me at least. The magnets on the Nexus 5 Qi charger are pretty strong without a case. With the cruzerlite cases it's not quite as strong but it does hold a bit. Probably wouldn't hold well hitting a series of potholes though. I guess it also depends on how vertical it would be to. I would imagine it would have a better chance of breaking loose completely vertical as opposed to some angle to it.
ParadingLunatic said:
That's pretty similar to what I want to do, although I was thinking of taking a Nexus 5 case and cutting a hole in the back and epoxying it to the charger two allow 2 things. One is to provide a little extra support for severe potholes and also to allow the wireless charger to sit directly on the phone maximizing the charge rate. I was going to cut the lip off around the edge of the case so the phone can just be placed into the case instead of snapping it in since the magnets will take care of the bulk of keeping the phone in place while the sides of the case will just provide extra support. Just an idea. If anything I'll start off with the same/similar thing as what you have and possibly add the case idea if I notice issues of slipping or popping off with pot holes..
Click to expand...
Click to collapse
I live in an apartment complex with speedbumps.. Made the truck go about 40-ish and the phone didn't even budge.. so you should be good. lol
I know what I'm getting with my next paycheck
I just hope the magnet on that dock is strong enough to hold my phone through its fairly thick silicone case
Click to expand...
Click to collapse
My N5 is without case currently. Every case I have is too bulky and just eh, thinking about trying the poetic bumper one Ive seen on amazon..
I Made this
DIY wireless car charger: http://youtu.be/dDH2_auNWVs
It would actually be nice if there were a thread specifically for DIY Qi charger projects which included pics/plans etc. I guess creativity and the search feature will have to suffice for now.
I was also thinking of building my own Qi charger. I'd like my case to be much smaller though, similar to the Nexus 5 Qi charger. I was thinking of stacking the coil on top of the PCB but I'm not sure what shielding if any is required between the coil and the PCB.
If only that new NXP semiconductor solution were available right now. Check it out here. https://www.youtube.com/watch?v=50hjojLLDww. Nothing much you can do about the size of the coil, but that tiny PCB is freaking sweet.
ilikethepenkils said:
That's exactly what I did just yesterday lol.. iMagnet dock with the Qi Nexus charger. The iMagnet dock has 4 strong mangets on the end, well I took those and put them on the plates that you're supposed to put in between a case and phone and glued them together to create a flat surface for the nexus charger.
It works perfect for me. Also had to order a charger to support the nexus charger.
Click to expand...
Click to collapse
Bingo! This is exactly what I was suggesting. I think I'll wind up doing the same. I've got one of the CHOE Qi chargers at home, but it is magnet-less. I'm also picking up a PowerBot unit to throw on my desk at the office.
I think you'll find that using a case to hold the phone snugly is not only overkill but also a hassle. Magnets work great on their own, but having a rubbery surface makes it even better.
I have the Air Dock (see here) myself but am considering downsizing to an official Nexus 5 charger fixed to a ProClip (see here) This would not only be smaller but also sturdier. First I might affix the Air Dock itself to the ProClip and see if that satisfies me.
Definitely happy with the Air Dock, though. Great product. The guy making them is great as well.
active nfc, Qi & bluetooth car dock
Hi all, I''ve been messing about with different versions of this for months now, since i had my Nexus 4. When i changed my car last year, the new one came fitted with an active, adjustable Brodit/Proclip iPod dock and a Parrot bluetooth system
The first thing i did was removed the active ipod plug from the bottom of the mount and replaced it with a standard micro usb for the Nexus.
Then i added an nfc tag to trigger a LLama event to switch on bluetooth and start music playback when connected
I decided i didn't like the Parrot system so i removed it and went back to the Belkin Aircast Auto i had from my last car and routed all the cables behind the dash to the lighter socket
Then i thought i'd try a cheap "puck" Qi charger. The jaws on the old ipod mount are very deep and the puck fitted in behind the phone nicely, with the nfc tag on top (first pic). The phone charged well even while streaming bluetooth, but would only maintain charge while using bluetooth and Sat Nav. together, so i kept the option to unplug the Qi and use wired charging when i needed more juice. The charger was a little wider than the phone, hence the foam and slight "v" angle on the mount jaws to hold it firmly
So last week i ordered a new pull tab slip case for my phone and the one that arrived was too small, so i thought it was time to break the guts out of the Qi charger (unclip the 2 halves and remove 4 screws to release a one piece coil and circuit board) and tidy the mount up a bit.
I made a taller plastic backplate for the brodit mount, stuck the circuit board to it with mounting tape and stuck the nfc tag directly to the centre of the coil. Then i added packing to even out the thickness of the whole piece and altered the slip case so it would slide over everything while leaving an access flap so i can still use the wired charger cable when necessary (pics 2 & 3)
If this works well i'll rebuild the charging "sandwich" from better plastic to decrease the thickness a little, then i'll fit an extra lighter socket behind the stereo for the charger
Related
I use an OtterBox commuter case and it is awesome. The case is larger and heavier, but also stays on the phone properly unlike all lighter ones I have tried.
My only issue is there us no freaking way that it will fit in the genuine samsung vehicle dock.
Currently I'm gathering pieces to fabricate my own dock that uses the genuine suction cup arm. You would need the samsung kit plus my dock, or will have an extension so it will stay standing upright on a desk, all while using the case. I'm thinking any smaller case could also use it with the addition of stick-on rubber spacers to make it fit snug.
I figure there may be a small market for it, prototype will like be made from aluminium on a cnc, but would wear out the case going in/out so will use a plastic injection moulder once finalised. May cnc plastic initially if can get my hands on a block.
So far the plan is for a dock that it slides into, like the samsung desk dock, but with the fittings to attach to vehicle kit arm.
Thoughts/comments? Foreseeable demand?
Pricing I anticipate to be roughly half to cost if the genuine vehicle dock.. So by the time you buy both it adds up. I think would be worth it, and would buy one myself if available.
At least, so far have found nothing similar...
Sent from my GT-I9100T using xda premium
I had a similar problem for a different reason, my SGS2 has no case but is quite fat due to the Momax 2700 mAh battery I use.
I ordered an "EXOMOUNT exogear" car holder as it has some sort of claw-lock mechanism that appears to work well with really fat phones. I have not received it yet so can't comment. 25€ on ebay.
It has no lighter-charger, but you can get one of those for peanuts.
Your plan sounds pretty interesting tho, nothing like a well-built custom product.
Exogear's Exomount
Yes I can vouch for Exogears' Exomount.
I've had it for 3 months on my S2 with CaseMate Pop, and works like a charm.
Exomount has a large jaw and can clip just about any smartphone bordering the size of a tablet.
It sticks awesomely on the dashboard. It will stick on any surface, including glass/windshield, but I prefer it on the dash.
If you don't believe me, look at the youtube video demonstration.
Yeah I looked at various mounts, my main motivation is I want it to charge at the same time, and want the charging part built into the dock so I don't have to dock and then plug in a loose cable. Docked and charging in one motion.
Hopefully will get time to draw it up in 3D tonight.
Sent from my GT-I9100T using xda premium
I'm very interested in this project. I'll keep an eye in this thread!
Have started the design. Hopefully will order the MicroUSB for the base this afternoon to measure up that part.
Guys
This may save you some time......
http://www.slipgripcarmounts.com/Sl...2-i9100-Using-OtterBox-Commuter_p_100415.html
You can use it with standard RAM Mount fittings (which come in a wide range of different types and sizes).
http://www.ram-mount.com/
Have fun
Thanks, had a surge of laziness when I saw that haha
I think I'll build mine as a personal project then instead of as a possible commercial project - though mine will have charging built into the dock Will keep posted.
Good news for all you Proclip fans,
I just recieved mine today and it works with the Samsung Extended battery just as well as the standard battery. There is a 1/2 in space behind the phone that should allow for even the most extreme extended batteries to fit as long as the battery cover does not extend beyond where the original battery cover fits (like if it wraps around the side of the phone it will not fit).
I ordered Proclip part number 513331 (Hard wired install).
Proclip doesn't disappoint either, this mount is just as awesome as the one for my old DINC. Nice and sturdy.
I'll post some pics later when I get it installed.
As is typical with proclip mounts, the mount is designed based on the physical dimensions of the phone (specifically the sides of the phone) so cases that change those dimensions will cause the phone to not fit in the grooves correctly.
Pix of the proclip in action
Grabbed a couple of pics for anyone interested.
Looks good, I had the incredible one too, but imo it was a little to hard to get in and out. Unfortunately since I already chipped my phone, I'm too scared to go naked with this phone. Plus their price is just too high for me.
Sent from my Galaxy Nexus using xda premium
T-Keith said:
Looks good, I had the incredible one too, but imo it was a little to hard to get in and out. Unfortunately since I already chipped my phone, I'm too scared to go naked with this phone. Plus their price is just too high for me.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I wont argue that they are spendy - I already had the base part but it's like $100 for both pieces for newbies.
But I do get something that no other mount has been able to offer me - this one is wired into the car, I can use only one hand to put my phone in it, and it doesn't fall or move when I press too hard. Considering the Verizon one is $40 and a POS it seemed worth the extra.
But yea if you have a case it's not so good.
does you phone fall if you turn the screen for navigation ?
I just ordered Proclip's adjustable mount 875214. Hopefully it will work well with my diztronic case. It grips near the bottom of the phone so it shouldn't interfere with any of the buttons or ports. I'll update after it arrives with the results!
roachdabug said:
I just ordered Proclip's adjustable mount 875214. Hopefully it will work well with my diztronic case. It grips near the bottom of the phone so it shouldn't interfere with any of the buttons or ports. I'll update after it arrives with the results!
Click to expand...
Click to collapse
Should be good, as it is adjustable. I wish they made the sides of the powered mount adjustable...
juju2lose said:
does you phone fall if you turn the screen for navigation ?
Click to expand...
Click to collapse
Nope, it stays in there really well.
roachdabug said:
I just ordered Proclip's adjustable mount 875214. Hopefully it will work well with my diztronic case. It grips near the bottom of the phone so it shouldn't interfere with any of the buttons or ports. I'll update after it arrives with the results!
Click to expand...
Click to collapse
Well for those who aren't aware, these Proclip holders come in 2 pieces: The first is a custom-fit bracket for your particular vehicle, and the other is the actual phone holder.
So let me start with the holder. The one I got is adjustable and holds my Galaxy Nexus with Diztronic case extremely well. It's snug but not difficult to remove, and leaves plenty of room behind the phone for the craziest of extended batteries. A+
Then there's the mounting bracket... I selected 853616 for my '07 Impreza. It hooked in behind the panel just fine and it is made of the same plastic as the holder which was nicer than I expected.
Unfortunately, it goes downhill from here: This particular bracket is a bad fit. All the angles are off, and as a result the adhesive backed sections do not contact the vehicle properly. Even if they did, the adhesive is so weak that I'm not sure it would stick. I'm going to have to pull it all apart and go to work with some thick double-sided adhesive tape of my own in order to deal with the gaps and get it installed properly. Not cool, especially considering the whole kit ended up costing me about $60. Now, there's lots of different brackets for lots of different cars out there, so your mileage may vary.
At any rate, it does a much better job holding the phone than my cupholder did.
Got mine a couple of days ago.
As has been noted, they come in two pieces. The piece that holds the phone is very, very nice and will definitely work with any reasonable extended battery. It's very snug, but not too snug, and the fit is perfect. I got one of the powered versions and it's fantastic.
The car mount piece, for me, is of similar quality. The fit is near stock and the thing is damn near impossible to remove.
As a unit, the two pieces are rock solid.
Highly recommended. I wouldn't hold out for the Samsung three pin holder. I had that same holder (minus the three pins, obviously) for my Nexus S - and this one is far, far, far better.
roachdabug said:
Well for those who aren't aware, these Proclip holders come in 2 pieces: The first is a custom-fit bracket for your particular vehicle, and the other is the actual phone holder.
So let me start with the holder. The one I got is adjustable and holds my Galaxy Nexus with Diztronic case extremely well. It's snug but not difficult to remove, and leaves plenty of room behind the phone for the craziest of extended batteries. A+
Then there's the mounting bracket... I selected 853616 for my '07 Impreza. It hooked in behind the panel just fine and it is made of the same plastic as the holder which was nicer than I expected.
Unfortunately, it goes downhill from here: This particular bracket is a bad fit. All the angles are off, and as a result the adhesive backed sections do not contact the vehicle properly. Even if they did, the adhesive is so weak that I'm not sure it would stick. I'm going to have to pull it all apart and go to work with some thick double-sided adhesive tape of my own in order to deal with the gaps and get it installed properly. Not cool, especially considering the whole kit ended up costing me about $60. Now, there's lots of different brackets for lots of different cars out there, so your mileage may vary.
At any rate, it does a much better job holding the phone than my cupholder did.
Click to expand...
Click to collapse
How snug of a fit is it? I have Verizon galaxy nexus with extended battery and Diztronic case. Does it take quite a bit of pressure to put it in the holder? Also, is the headphone jack open at the bottom?
Sent from my Galaxy Nexus
roachdabug said:
the adhesive backed sections do not contact the vehicle properly. Even if they did, the adhesive is so weak that I'm not sure it would stick. I'm going to have to pull it all apart and go to work with some thick double-sided adhesive tape of my own in order to deal with the gaps and get it installed properly.
Click to expand...
Click to collapse
That's what I had to do for my wife's Civic. She got the car mount that affixes to the center console and that one piece of double sided tape just wasn't cutting it. I used a heat gun to remove the factory tape and then liberally applied tape to all parts contacting the console. It's been holding steady for over a year.
Proclip should probably give people more sticky tape - but I think the reason they only use a single piece is because they tout that the proclip doesn't damage the car and it could be argued that uber liberal amounts of double-sided sticky tape could potentially damage some surfaces. In the civic it’s all plastic so it’s NBD to use a heat gun and remove any residue, but if was a BMW with an oak dash then I could see people complaining.
dgwood12 said:
How snug of a fit is it? I have Verizon galaxy nexus with extended battery and Diztronic case. Does it take quite a bit of pressure to put it in the holder? Also, is the headphone jack open at the bottom?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I don't think any case would work with the proclip because it is a very snug fit and yes it takes a fair amount of pressure to put it in. Not so much that it will move the dock but certainly enough to keep the phone from coming out accidentally.
The only reason the extended battery works is because there is nearly a 1 inch opening behind the phone and the battery cover does not extend to the edge.
Yes the headphone jack is open but you would need a connector that is straight. A 90 degree connector would not work.
I currently have the satatchi tablet cd slot mount in my car:
http://www.amazon.com/gp/product/B00II8JDRM/ref=oh_details_o07_s00_i00?ie=UTF8&psc=1
I also got two nokia dt-900 chargers for $5 each on that att sale.
I am on a tight budget so buying theairdock is out of the question.
The thickness of the dt-900 combined with the space available on the mount make using it in current form impossible, the tablet won't fit at all.
Is it possible to take parts off the dt-900 to make it thinner yet still work correctly?
If not, is there a DIY way to make your own qi wireless charger by taking apart a normal one or building your own from parts?
Or is there an extremely thin qi wireless charger on the market (like 5mm or less in thickness)?
sfetaz said:
I currently have the satatchi tablet cd slot mount in my car:
http://www.amazon.com/gp/product/B00II8JDRM/ref=oh_details_o07_s00_i00?ie=UTF8&psc=1
I also got two nokia dt-900 chargers for $5 each on that att sale.
I am on a tight budget so buying theairdock is out of the question.
The thickness of the dt-900 combined with the space available on the mount make using it in current form impossible, the tablet won't fit at all.
Is it possible to take parts off the dt-900 to make it thinner yet still work correctly?
If not, is there a DIY way to make your own qi wireless charger by taking apart a normal one or building your own from parts?
Or is there an extremely thin qi wireless charger on the market (like 5mm or less in thickness)?
Click to expand...
Click to collapse
I purchased one of these: http://www.ebay.com/itm/271329239542?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT
and even though it looked thin enough between the Tx coil and the phone it's self.. I had to open the charger up and use my Dremel tool to remove as much plastic inside as I could to make it as thin and with less space as possible between the phone and the Qi Charging coil. It worked out pretty well. Depending on the Qi Charging coil, like this one here: http://www.ebay.com/itm/NEW-Qi-Wire...S_Cell_Phone_PDA_Chargers&hash=item43c9a660a3
You can use a rotary tool and Dremel from underneath to fit the PCB and Coil, leaving just enough plastic on the outside, like a thin layer, but strong enough not to break... Place the Coil in first and mount it with a Hotglue gun, then mount the PCB over it, using a smudge of hot glue to hold that in with out making it permanent like if you were using Super Glue so you can make modifications if necessary . You basically have about 5mm of space to work with, anything more than 5mm and your going to have problems... It has to be super thin, but strong enough not to break under pressure. Where you place the coil has EVERYTHING to do with the best type of charge you are going to get. MAKE SURE you have the phone's Rx Coil, and the Qi Tx Charging coil align PERFECTLY.. Experiment a little. Once you find that "Sweet spot", then hot glue everything together, and it should work like a charm.. I wish I had pictures to show you. Good luck!
YouTube is your friend here.. Look at a few DIY videos...
Edit, I have not yet to find a Qi Charger that fits EXACTLY at 5mm, I had to modify mine so that it could get as close to 5mm as possible if not closer.. You will not though be able to charge it with a case on it.. Thats the bad part about all this..
Buy a bare Qi coil very CHEAP, http://www.ebay.com.au/itm/181445605298?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
I just noticed the other ProClip thread and realized that I'd not posted my own solution, which is an Air Dock and ProClip together.
Unfortunately I don't have any photos of my phone on the thing, but check it out. Sorry for the darkness of the photos. And for those wondering, the USB cable (not pictured) plugs into the bottom and I feed it into a hole I made in the air vent, so it's pretty well hidden. Holds the Nexus 5 and anything else I've thrown at it just fine, even a Nexus 7 (although I wouldn't trust that one on a bumpy road). Oh - also forgot to mention, the Air Dock backplate was simply pried off with a knife and the dock attached to the ProClip with automotive adhesive tape (double-sided). Holds so sturdy that you'd swear it was part of the car. My only complaint is the size of the thing, and considered using an official Nexus 5 charger instead.. but I think that'd look somehow more odd.
rewen said:
I just noticed the other ProClip thread and realized that I'd not posted my own solution, which is an Air Dock and ProClip together.
Unfortunately I don't have any photos of my phone on the thing, but check it out. Sorry for the darkness of the photos. And for those wondering, the USB cable (not pictured) plugs into the bottom and I feed it into a hole I made in the air vent, so it's pretty well hidden. Holds the Nexus 5 and anything else I've thrown at it just fine, even a Nexus 7 (although I wouldn't trust that one on a bumpy road). Oh - also forgot to mention, the Air Dock backplate was simply pried off with a knife and the dock attached to the ProClip with automotive adhesive tape (double-sided). Holds so sturdy that you'd swear it was part of the car. My only complaint is the size of the thing, and considered using an official Nexus 5 charger instead.. but I think that'd look somehow more odd.
Click to expand...
Click to collapse
This is awesome! Thanks for posting! I just got my nexus 6 and really like the air dock, but I love my pro clip. Glad to see someone found a solution!
Hey all - has anyone tried a Qi compatible magnetic car mount to see if it would work with our phones? Not really needing the wireless charging, just wondering if those circular magnetic mounts allow the wireless charging feature to still work with our phones. Would be nice to have an actual magnetic mount that charged at the same time, but not a necessity.
Ozark_8125 said:
Hey all - has anyone tried a Qi compatible magnetic car mount to see if it would work with our phones? Not really needing the wireless charging, just wondering if those circular magnetic mounts allow the wireless charging feature to still work with our phones. Would be nice to have an actual magnetic mount that charged at the same time, but not a necessity.
Click to expand...
Click to collapse
Nope it does not work The metal plate stops the wireless charging from working. As I'd rather have magnetic car mount than wireless charging I've just put my Nexus Wireless Charger back to the basement, until I get a car with Android Auto.
Edit: just reread your post and you're asking about a charging mount, which I've not tried. The below still applies.
It works. It all depends where you place the metal plate. I can put mine low enough between the case and phone and still do both. It works fine, but I'd rather have another plate in there to get a better hold on my mount. Sometimes it slides a bit.
What we really need are a couple of metal strips you can put along the sides to reinforce it some more. Take a look at the 3 XL tear down, and you'll see where the charge sensor is. Totally doable. I used https://www.amazon.com/gp/product/B07FZVCPHL/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1 which has a rubber cover and then a hard backing that snaps in. Placed the plate between those and no scratches
If you look at Nato Mounts, they have a circle ring plate. Big thin O. Scosche also have a U shape plate. Those leave a big opening in the middle. You can get one like the Nato Mount for half the price on Amazon. Just don't know about the charging speed.
chrischoi said:
If you look at Nato Mounts, they have a circle ring plate. Big thin O. Scosche also have a U shape plate. Those leave a big opening in the middle. You can get one like the Nato Mount for half the price on Amazon. Just don't know about the charging speed.
Click to expand...
Click to collapse
I'll have to check that out. I experimented in lowering the magnetic plate on my case so that it was able to recognize it was on the pixel stand and charge, but it was only up to 50% by the morning, so it's interfering with the signal still.
Here's another option, look at the last image, comes with two different magnetic plate options.
https://www.amazon.com/Nillkin-Wire...lkin+qi+mount&qid=1554118801&s=gateway&sr=8-5