Hi experts,
I had changed my G3 to 530dpi, everything working fine, only one thing is the QuickCircle case, the clock is much more smaller the the hole of the case, i tried to use the xpost app setting, but don't know which app should be modify.
So any guys can help?? Many thanks.
Joe
Com.lge.clock, apply res to widgets (based on G2 running G3 ROM).
ddavtian said:
Com.lge.clock, apply res to widgets (based on G2 running G3 ROM).
Click to expand...
Click to collapse
I dont see that in my list. May i ask where it is
Edit: nvm i found it but what app should be changed for the animation light that goes around the clock when the clock cones out?
Sent from my LG-D850 using XDA Free mobile app
blkghost22 said:
I dont see that in my list. May i ask where it is
Edit: nvm i found it but what app should be changed for the animation light that goes around the clock when the clock cones out?
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, the clock size is fixed, but the animation light not correct, so any expert can advise which apk control it?
thanks a lot.
joechan said:
Yes, the clock size is fixed, but the animation light not correct, so any expert can advise which apk control it?
thanks a lot.
Click to expand...
Click to collapse
I am stuck with the same problem with the clock size and the light animation. I am at dpi 530 from stock value of 640.
You said you were able to fix the clock size.
I have tried various combinations in app settings via xposed for com.lge.clock but the havent been able to fix it yet.
Can you please be kind enough to mention the exact steps with the settings and selections to resolve this issue?
Regards,
Pdash
pdash79 said:
I am stuck with the same problem with the clock size and the light animation. I am at dpi 530 from stock value of 640.
You said you were able to fix the clock size.
I have tried various combinations in app settings via xposed for com.lge.clock but the havent been able to fix it yet.
Can you please be kind enough to mention the exact steps with the settings and selections to resolve this issue?
Regards,
Pdash
Click to expand...
Click to collapse
You need to hit the checkbox that says something about applying the settings to the widget.
My animation is off, but my clock is fine so I'll live with it.
Bluerai said:
You need to hit the checkbox that says something about applying the settings to the widget.
My animation is off, but my clock is fine so I'll live with it.
Click to expand...
Click to collapse
Thanks.
You have said that earlier also.
I presume you are using the app ops settings in xpose.
Please provide a little more detail about the other values that you have filled up.
I have tried using a value of dpi = 530/640 and font scaling of 75/100 including checking the option to resize widgets.
But none of that worked.
Appreciate if you help a little more please.
Regards,
Pdash
pdash79 said:
Thanks.
You have said that earlier also.
I presume you are using the app ops settings in xpose.
Please provide a little more detail about the other values that you have filled up.
I have tried using a value of dpi = 530/640 and font scaling of 75/100 including checking the option to resize widgets.
But none of that worked.
Appreciate if you help a little more please.
Regards,
Pdash
Click to expand...
Click to collapse
I just went over this with a buddy tonight, and it came down to him not having app settings selected in the modules in xposed..
Other than that.. I'm not sure what it could be??
Are you rebooting your phone after you save the settings? It doesn't kill the widget after you hit save.. Some apps it works fine but not this widget that I've seen..
I Have android system (unchanged) and the build.prop at 530, with the clock at 640 (see attached) and my clock looks like normal on the quick circle case.
Running out of ideas if you're doing the above correctly =/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Finally i use the default dpi for system, and use xposed app setting to modify dpi to 530 for other app
Bluerai said:
I just went over this with a buddy tonight, and it came down to him not having app settings selected in the modules in xposed..
Other than that.. I'm not sure what it could be??
Are you rebooting your phone after you save the settings? It doesn't kill the widget after you hit save.. Some apps it works fine but not this widget that I've seen..
I Have android system (unchanged) and the build.prop at 530, with the clock at 640 (see attached) and my clock looks like normal on the quick circle case.
Running out of ideas if you're doing the above correctly =/
View attachment 2873271
Click to expand...
Click to collapse
That was awesome bro. Thanks for the advice.
I was doing everything.
I was just not rebooting Dumb me
Thanks for mentioning it.
Now the clock size fits the hole
The only thing off is the white animation light.
Any luck with that?
Regards,
Prasad
Animation is still off for me.. Haven't figured that one out.
Let me know if you figure it out though haha
Anyway to fix the clock size on the lock screen after changing the DPI? I've changed the clock settings as listed above for fixing the clock with the quick circle, but that doesn't appear to fix the lock screen after a reboot.
Sent from my LG-D851 using Tapatalk
partylikeaninjastar said:
Anyway to fix the clock size on the lock screen after changing the DPI? I've changed the clock settings as listed above for fixing the clock with the quick circle, but that doesn't appear to fix the lock screen after a reboot.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
Mate,
The screenshot posted by Bluerai on page 1 worked for me perfectly.
If you have modified your DPI to 530 for example, make sure you have xposed installed and app op settings installed, check marked and rebooted.
Open app op settings, look up com.lge.clock and open it up.
Modify the settings as mentioned by Bluerai on previous page screenshot. Set to 640 dpi, and check the apply res to widget also.
Then save the settings and press back button once to come back out of com.lge.clock setting page.
Then reboot your mobile and it should work.
It worked for me.
Let us know how it works.
Regards,
Pdash
pdash79 said:
Mate,
The screenshot posted by Bluerai on page 1 worked for me perfectly.
If you have modified your DPI to 530 for example, make sure you have xposed installed and app op settings installed, check marked and rebooted.
Open app op settings, look up com.lge.clock and open it up.
Modify the settings as mentioned by Bluerai on previous page screenshot. Set to 640 dpi, and check the apply res to widget also.
Then save the settings and press back button once to come back out of com.lge.clock setting page.
Then reboot your mobile and it should work.
It worked for me.
Let us know how it works.
Regards,
Pdash
Click to expand...
Click to collapse
No luck. The default circle clock remains unchanged. However, if I turn on lock screen widget and add the digital clock from that, it is scaled properly, but it's the circle clock that I want to use.
Sent from my LG-D851 using Tapatalk
Awesome......That worked for me.......Had to save it after applying to the widgets as well and then reboot.....Worked when everything else failed...Thanks a bunch.....
What I did was I only set LGHomelauncher in App Settings to 530. Then I used G3 tweak box to change the app drawer grid and navigation bar size.
makes the launcher look better but everything else works fine.
i also used app settings to change my most used apps like browser, FB, etc..
What app do you all use??? Ops settings? I cant find it on the market and on google first thing that pops up is this thread... I already changed the dpi with system file edit but I have a quickcircle case and its no where close to fitting. Just need the name of the app thanks
EDIT: Nvm found it
Is there still no solution for the scale of the lighting ring of the circle case when changing the system DPI?
I love my circle case (especially with the great Quick Circle Apps from the play store!) and the lighting animation is just awesome, but the system default DPI of 640 is just unuseable
I tried sevaral configurations and googled a lot but in every case there is something that is not perfect. Is it really true that the scale of the lighting ring depends on the systemUI DPI?
What I've tried: (used apps: textdroider_dpi, app settings from xposed framework)
Scenario 1: Set DPI to 530 with textdroider_dpi and clock / quick circle apps DPI with app settings to default 640
In this scenario the system is great, even the apps of the quick circle case fits perfectly - only the lighting animation is not correct (so small)
Scenario 2: Keep default DPI of 640 for the system, but change the DPI settings of my mostly used apps (like whatsapp, homescreen, launcher) to 530
Here the animation and apps are ok, but some important things like the notification bar is still too big. Also you need to change the DPI of every single app to 530 via app settings, which is really annoying.
Did nobody find out where this specific setting could be changed? For me scenario 1 would be perfect if the scale of lighting animation suited.
Another great idea which I read about in another topic: What abound changing the color of the animation from white to a color of your choice? I love customizing my phone so this would be great as well. Unfortunately I am only a web developer and I'm not really familiar with the android system, otherwise I would try to find a solution in the system on my own
partylikeaninjastar said:
No luck. The default circle clock remains unchanged. However, if I turn on lock screen widget and add the digital clock from that, it is scaled properly, but it's the circle clock that I want to use.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
you have to enable the appsettings-module in xposed-installer -> modules (checkbox). hope that helps!
---------- Post added at 11:53 PM ---------- Previous post was at 11:45 PM ----------
íve set com.lge.clock, com.yoavst.quickapps, com.android.phone, com.android.contact, com.lge.clock to standard 640dpi (with help of xposed appsettings). now everything displays just fine (except of closing animation). hope this helps somebody
But to one has a working solution for the closing animation (lighting ring) with a customized system DPI?
Related
[JB:CM10:HYBRID] PARANOIDANDROID [1.99, True HybridMode, Size & UI on Per App Basis]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More Screenshots
To be honest, this is not tablet mode at all, it has nothing to do with silly build.prop hacks. This is the first and only Android rom to feature true Hybrid mode. This rom lets you scale and project every app, every widget, even systemcomponents individually. Remember, android is modular, everything is an app: Lockscreen, navigationbar, dialogs, popups, keyboards, widgets, and your regular apps of course. Apps have the capability to switch into various designs or layouts according to the device they run on. This can result in a complete new experience as many apps will transform to the better.
Now for every element that you like chose a mode (PhoneUI, Phablet/Nexus-7UI, TabletUI) and/or a size. You are 100% independent of the system DPI which runs nicely in whatever value it has been assigned to. You do not need to boot your phone into a certain DPI. Neither will most of the changes you apply require a reboot. You will not suffer from the myriads of troubles which normally haunt you under build.prop tablet mode. Your market, phone, etc. will all work, apps won't shrink on you unless you shrink them yourself. This project will entirely transform your device, but retain the aesthetics and the feel of your phone.
Donations to CM http://forum.cyanogenmod.com/donate , to molesarecoming http://forum.xda-developers.com/donatetome.php?u=4491046, to D4rKn3sSyS http://forum.xda-developers.com/donatetome.php?u=3484876, to me http://forum.xda-developers.com/donatetome.php?u=1216319
Click to expand...
Click to collapse
Do not report ANYTHING or as moles and D4rkn3sSyS says, I will hunt you
CWM: Wipe Cache / Factory Reset IF you're on any ROM other than AOSP JB (May work without fullwipe from older PA versions if your /data folder is not full of things)
CWM: Install Zip: Rom: Download
CWM: Install Zip: Gapps: Download
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
[*]Video tutorial: http://www.youtube.com/watch?v=72Ow-YQeex4 - Could someone kindly record a video ? thanks
Our webpage: http://betadan.com/paranoid/
You want to port PA? Take a look here: http://forum.xda-developers.com/showthread.php?p=27558806
Themes and other goodies you can find here: http://forum.xda-developers.com/showthread.php?t=1646034
Go to Settings, System, Font size, set it to NORMAL
Check "Auto Hide" in Settings, System, Statusbar, to finally get Fullscreen
Trebuchet Settings: margins:SMALL, show permanent searchbar:YES, Grid: 4x4, resize all widgets:YES, Wallpaper scrolling: OFF
If you have an issue and you want to call our attention, here's what you do:
1. Try everything you can, find solutions for yourself. Wipe caches, revert all your settings you have made, go back to your stock Kernel, factory reset if you have to or reflash the rom. Assume that the issue is on your side and try your best to isolate it.
2. Search this thread and Cyanogenmods aswell (its our base) for possible reoccurences of your issue and hopefully solutions that may have come up.
3. If you think the issue is important enough that we should cease our work and look into it, post your issue, BUT ...
... stay friendly, do not demand anything, do not threaten
... explain your issue as precise as you can, name the exact apps and conditions that cause trouble, help us to replicate the issue right away. If we can't there's no way we can fix it and your post will simply clutter the thread
... collect evidence, keep in mind this is a developer thread so even if you are not one, do us the favor and research how to record logcat. logcat is the single most important help you can give us to resolve your issue.
Tina: http://krebsmilk.de/
Cyanogenmod Team
KaliMochoAz
ParanoidAndroid Team
MichaelCampos (For Testing)
gokussjx
ParanoidAndroid JellyBean - v1.99
v1.99
Officially build from sources
OTA Updates are back via goomanager (incorporated on the ROM)
PA version in Settings > About
Fixes and CM merges
crespo4g: fixed gps and sensors
v1.98
Project butter recents in tabUI (2/2)
Quick access hybrid properties by longpressing a recent app
More refined hybrid algorithm to reveal more layout containers
TabletUI toggles
All recent cm merges (Trebuchet, googles 4.1.1 r4 with a whole bunch of fixes for memory leaks, etc)
v1.97
New option: "large" to trick an app thinking the device has a real big screen. some need it, like amazon kindle to jump into tabUI. some even react on it, gdrive will slightly adapt its layout - makes only sense if you give it a small dpi though.
The algorithm to extract the actual layout containers from apk files works more precise and can reveal more than before. there will still be a few apps left who do that layout stuff in java - we will add an override button for that, but in the meantime you can edit /system/etc/paranoid/properties.conf .layout=360 for phone-like UI, 600 for phablet, 720 = tablet, 1280 = super huge tablet
Several bugfixes from us and cm
v1.96
Breakthrough: We can finally target the actual layout containers inside the apk. If an app brings only phoneUI, you see it right away as you only have one UI option. If it brings ten, you will be able to pick each one of em. We're finally away from this Phone/Phab/Tab nonsense.
Total Hybrid engine revamp, alot less clutter, many bugfixes, apps wont make jumps when you load them up because their actual size is calculated by the engine.
Panel is still growing. It brings new options and new preferences that can even change android system settings.
All recent cm10 patches and fixes
v1.9.5
Finally hardware accelerated recents in TabUI, as fluid as ever. The ugly gradient is gone aswell
Paranoid got its own dir in /system/etc/paranoid - pad.prop is not properties.conf
A clean backup properties file is shipped, you can make a full reset in the panel in case you lost it with all the settings you made
Force option can be activated in the panel, good for widget scaling
The DPI sliders in the panel read min/max props from properties.conf, define them as you like
TabUI Recents are back to a bigger size, this is temporary, i'll look for ways to port the phone implementation as project butter skipped the tabUI code
CM fixed alot of features again, we included them all
v1.9.2
Softkeys toggle
Merged CM's theme engine
Fixed a few unclean sources
HDPI adjustments
Fixed Wifi Supplicant
v1.9.1
Hybrid bugfix, finally keyboard/facebook scaling works on JB again without sideeffects
Layout fix for notificationcenter gap in tabUI
Layout fix for recents in phabUI
Speed prefs ask for reboot
New bootani thx to nasaorc
CM10 patches
How to set the workspace mode
How to change an apps Layout and size
Sick thanks
Sent from my Nexus S 4G using xda premium
YESSSSSSSSSSSSSSSSSSSS My life is complete!!!!
Sent from my Nexus S 4G using Tapatalk 2
Thank you. Love this!
No go on 4g tho
Sent from my Transformer Pad TF300T using Tapatalk 2
DMardroid said:
Thank you. Love this!
No go on 4g tho
Sent from my Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
Damn no 4G. That sucks, I am flashing this now. I need 4G, actually get in around where I live and use it to stream music on my commute.
DMardroid said:
Thank you. Love this!
No go on 4g tho
Sent from my Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
jblazea50 said:
Damn no 4G. That sucks, I am flashing this now. I need 4G, actually get in around where I live and use it to stream music on my commute.
Click to expand...
Click to collapse
No 4G? Hmm, can you guys try to give me logcat when you tried to enable 4G...
How do I get a logcat?
Will try this after some more word on 4G. Looks very very interesting!
jblazea50 said:
How do I get a logcat?
Click to expand...
Click to collapse
You need Android SDK then do this command ''adb logcat > log.txt''
Thanks for bringing this to the Nexus S 4G. I've been using it on my GNex and love it there! It's the only thing I'll run, and I've been hoping to see it here.
Sent from my Nexus S 4G using xda premium
here's the log.txt
log.txt
Is mms working in the stock app?
Sent from my Nexus S 4G using Tapatalk 2
nice!! I've been dying to get my hands on this...hope you get 4g working soon
Does this ROM include this?
Jelly Bean Binaries for Nexus S 4G
https://developers.google.com/android/nexus/drivers#crespo4gjro03h
Switched to tablet mode and the signal and battery icons are almost too tiny to see. Is there a setting I missed somewhere?
EDIT/ Fixed. Didn't realize I could change the density of systemui. >_>
Everything working good so far. MMS works fine for me. No 4G here to test. This is probably my favorite ROM ever.
akabadnews said:
Switched to tablet mode and the signal and battery icons are almost too tiny to see. Is there a setting I missed somewhere?
EDIT/ Fixed. Didn't realize I could change the density of systemui. >_>
Everything working good so far. MMS works fine for me. No 4G here to test. This is probably my favorite ROM ever.
Click to expand...
Click to collapse
Tweak your systemUI dpi
Edit: actually paid attention and saw that you got it...lol
Sent from my Nexus S 4G using xda premium
akabadnews said:
Switched to tablet mode and the signal and battery icons are almost too tiny to see. Is there a setting I missed somewhere?
EDIT/ Fixed. Didn't realize I could change the density of systemui. >_>
Everything working good so far. MMS works fine for me. No 4G here to test. This is probably my favorite ROM ever.
Click to expand...
Click to collapse
Xaelius said:
Tweak your systemUI dpi
Edit: actually paid attention and saw that you got it...lol
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
What did you ultimately set it to? I tried choosing the tablet mode preset, then put the System UI DPI to all the way up to 240 and still have an unuseable notification bar. I tried a couple of times, but no luck. Also looks like I don't have navigation icons. I figured I'd need to turn on the nav bar, but can't find anything for that yet. Any advice would be appreciated.
Edit: Duh! I found the nav bar and turned it on. I'm also using Nova Launcher, which I thought would make a difference. I tried messing with settings of both the stock launcher and Nova with no luck. It looks like I might be actually changing the size of the icons, but the height of the notification bar area does not change.
One more edit: in full disclosure, I'm using lowrider's custom GApps package, so I'm downloading the one in the OP, just to make sure I'm not causing the problem for myself.
have to ask this, but does this have the volume wake feature?
This should work for any 4.1.2 rom for the note 2 that has a working Xposed installer and MULTI-WINDOW capabilities.
THIS IS FAR FROM PERFECT
I have been wanting to make my device float and resize any app. I didn't put too much effort into it until recently. I finally got the settings down to make this possible.
Please keep in mind some apps (especially stock ones) don't like to be resized so they will almost become unusable if they are resized to small, this is one of many reasons why I previously said that this is far from perfect. On the plus side at least it will let you do ANY app !!!!
I used NEXT LAUNCHER PRO for this cause it supports MULTI-DPI a lot better than TW does, but you don't have to it will still work with TW but it makes some of the drawables look weird.
INSTRUCTIONS:
PLEASE PLEASE PLEASE DO A CWM OR TWRP BACKUP AND VERIFY THE BACKUP WAS DONE PROPERLY BEFORE YOU CONTINUE
1: Install XPOSED INSTALLER V. 2.4 from here:
http://forum.xda-developers.com/showthread.php?t=1574401
Thanks to @rovo89
2: Install XPOSED APP SETTINGS V. 1.6 from here:
http://forum.xda-developers.com/showthread.php?t=2072081
Thanks to @Tungstwenty
3: Install XPOSEDMULTIWINDOW240.APK from here:
http://forum.xda-developers.com/showthread.php?t=2048668
Thanks to @Scalee
Thanks to anyone I may have forgotten
MAKE SURE YOU FOLLOW THE INSTRUCTIONS TO PROPERLY INSTALL THE FRAMEWORK, APPSETTINGS.APK, AND MULTIWINDOW240.APK BEFORE YOU CONTINUE
Once the above are installed and working properly as per the instructions in the OP's of the DEV's mentioned above, you can continue:
At this point REBOOT your phone just to be sure all the installations and settings stuck. Open Multi-Window and add an app to it just to make sure everything works properly so far.
Open the App Settings App in your app drawer, should look like the one in this picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Search for and open Android System, should look like the one in this picture:
At the top there is an ON/OFF slider (as seen in picture below), slide to the right to turn ON.
Then, CHANGE the DPI to 240, and the Screen (dp) to 800x1280 (also seen in same picture below).
At the top there is a save button, now is the time to hit that, a pop-up will show that says:
Apply Settings: Also kill the application so when it's relaunched it uses the new settings? Click YES
Immediately press and hold the power button to REBOOT.
After REBOOT open the App Settings App in your app drawer again and search for com.sec.android.app.FlashBarService, should look like the one in this picture:
At the top there is an ON/OFF slider (as seen in picture below), slide to the right to turn ON.
Then, CHANGE the DPI to 240, and the Screen (dp) to 480x854 (also seen in same picture below).
At the top there is a save button, now is the time to hit that, a pop-up will show that says:
Apply Settings: Also kill the application so when it's relaunched it uses the new settings? Click YES
Immediately press and hold the power button to REBOOT.
All done!!!!!!!!!!!!!
Now to learn how to succesfully make any app that is added to your FlashBar, FLOATING, RESIZABLE.
Turn on MULTI-WINDOW and INSTEAD of dragging out the first app, just CLICK on it and it will open in full screen, It doesn"t look like it now but this will be your first floater lol.
Next drag any random app (like settings or something) out of the FlashBar and drop it.
Now you will notice at the top of the first app that was added to the MULTI-WINDOW now has a PIN on the top left.
Click on the PIN to make it GREEN , FLOATING and RESIZABLE now. To move it grab it by top near the center and pull it around. To resize grab the edge of the left, right, or bottom side and resize.
Next, touch the random second app that is now full screen and hit the back button once and it will go away.
Now with the floater at the bottom, open FlashBar again, find the next app you want to FLOAT, and once again just CLICK on it and it will open in full screen,
next drag any random app (like settings or something) out of the FlashBar and drop it again.
Now you will notice at the top of the first app that was added to the MULTI-WINDOW now has a PIN on the top left.
Click on the PIN to make it GREEN , FLOATING and RESIZABLE. To move it grab it by top near the center and pull it around. To resize grab the edge of the left, right, or bottom side and resize.
Next, touch the random second app that is now full screen and hit the back button once and it will go away.
Do you see a pattern now, do for any and as many apps you want open at once.
Also after you make an app floating you can press the pin again and watch the pin turn GREY and the app will stay floating in the background instead of foreground.
GREEN pin = app floating in foreground.
GREY pin = app floating in background.
When all said and done you should be able to do this with any app:
PROFIT!!!!!!!!!!!
The above mentioned module called XPOSED APP SETTINGS is a wonderful tool for changing individual apps to make them visually fit your liking. Everything I talk about in the next few paragraphs is in direct relation to XPOSED APP SETTINGS.
NOW FOR A LITTLE KNOWLEDGE
Screen density
The quantity of pixels within a physical area of the screen; usually referred to as DPI (dots per inch). For example, a "LOW" density screen has fewer pixels within a given physical area, compared to a "NORMAL" or "HIGH" density screen.
Font Scale
The size of the font in the amount of pre-allocated space; measured by percentage.
Resolution
The total number of physical pixels on a screen; usually known as Screen (dp).
Xlarge Resolution
extra large resolution
Locale
This allows you to change the language of any app individually; without changing your whole system to a different language.
Fullscreen
Force the app into fullscreen mode while hiding the status bar that is easily accessible by pulling down on the top of the screen.
Prevent the app from going into fullscreen mode. Keeps status bar on screen while the app is open.
No Title
Removes title bar from app. Every app I chose this for force closes so don't mark my words.
Keep Screen on
This will NOT let your screen turn off while the app is on the screen unless you hit the physical power button.
Show when phone locked
Leaves app open in the foreground of the lock screen while app is open and on the screen
Orientation
The ability to change whether an app opens (portrait or landscape). The dropdown consists of
(default app rotation). Uses whatever the default orientation that is already written into the app
Normal rotation = Will rotate screen normally
Always portrait = The ability to FORCE the app into portrait mode ONLY
Always landscape = The ability to FORCE the app into landscape mode ONLY
Force auto-rotation = The ability to FORCE the app to auto-rotate (will edit after tested).
Resident
Keeps any app in memory (running in background).
Insistent Notifications
Insistent notifications repeat their audio, vibration, and light settings continuously until canceled. These Notifications are typically used for events that require immediate and timely attention; such as an incoming call or the ringing of an alarm clock.
No BIG Notifications
Makes the app notification in the notification dropdown smaller, like a small preview instead of the normal show everything notification.
Permissions
Allows you to revoke permissions from any app of your choice.
If you've come this far than you probably know that some apps look like they might be sized bigger or smaller than other parts of the phone.
That's because the system doesn't change the DPI and Screen (dp) automatically with some/most apps.
After all the changes, the GALLERY app title bar is too big, meaning the DPI did not auto adjust. In order to make everything fit in the title bar you have to lower the DPI to anything lower than 240 for THIS app ONLY.
Every app will need it's own custom setting in order to get it the way you want it. Please DO NOT post that this exact setting did not work for any other app cause it MAY or MAY NOT. Consider yourself warned
AFTER SEEING THIS THREAD IMAGINE THE POSSIBILTIES
Check out this post for more cool settings and results.
http://forum.xda-developers.com/showpost.php?p=45722669&postcount=234
Please, feel free to change your settings up a LITTLE or ALOT and feel free to fill up this thread with awesome pictures and configurations.
PLEASE DO NOT POST A PICTURE WITHOUT A FULL CONFIGURATION LIST LIKE BELOW PLEASE
PHONE MODEL: example T889
ROM:example JEDI MASTER
KERNEL: example SABRE
CONFIG: example dpi=240, screen dp=800X1280, font scale=100, etc..., etc..., etc...
THANK YOU FOR YOUR COOPERATION
HOW TO DISABLE XPOSED APP SETTINGS
Being that this MOD is not perfect, sometimes you might need to disable Xposed App Settings if something goes wrong (example: I made a change to an app that I didn't like, after reboot I went to change the settings back and noticed the app didn't show up in Xposed App Settings, even after several reboots).
TO FIX THIS:
Go to XPOSED INSTALLER in your app drawer (some roms like jedi master have the xposed installer built into a custom app like jedi tricks app that @ptmr3 made for his roms) anyway once in the installer, click on MODULES at the top right corner, then uncheck the box next to XPOSED APP SETTINGS.
NOW REBOOT. You will notice that all the Xposed App Settings aren't enabled anymore.
Then go back to your Xposed App Settings app and find the app you had problems with, that started this disable process.
Now change the settings back to a known good configuration. DON'T FORGET TO SAVE before exit.
Immediately go back to your XPOSED INSTALLER, click on modules and recheck the box next to XPOSED APP SETTINGS to renable it.
NOW REBOOT AGAIN
If you followed the instructions given, properly you should have everything back to the way it was before the problem occurred.
@Fictionles made a HOW-TO make floating Windows minimize. Go check it out and give him thanks here:
http://forum.xda-developers.com/showthread.php?p=46385342#post46385342
PLEASE REMEMBER TO HIT THAT THANKS BUTTON
I'M NOT RESPONSIBLE FOR YOUR DEVICE
Nicely done on the how-to OP! Great layout, good depth of instructions - great share, keep it up!
Works perfectly on Tweaked 2.4.1.
Now to try connecting this via HDMI to a 1080p monitor and, using a bluetooth mouse and KB, make this a portable PC.
ytj87 said:
Works perfectly on Tweaked 2.4.1.
Now to try connecting this via HDMI to a 1080p monitor and, using a bluetooth mouse and KB, make this a portable PC.
Click to expand...
Click to collapse
I'm on master 16 with sabrekernel 35.6 with the ext2 system data and cache mod.
All of this is amazing with these .phones. I will be finally getting an mhl adapter in the near future. They aren't expensive.
I hadn't looked into Master too much because of the lack of multiwindow, but read in the dev thread that it was working past a certain version. So multiwindow (and this thread's particular mod) does indeed work on 16 for you?
ytj87 said:
I hadn't looked into Master too much because of the lack of multiwindow, but read in the dev thread that it was working past a certain version. So multiwindow (and this thread's particular mod) does indeed work on 16 for you?
Click to expand...
Click to collapse
This was done and tested on master 16 with sabrekernel 35.6 and the ext2 system, data, and cache mod. Confirmed. I'm waiting for a response from my brother in law that has an att note 2 with the same set up on whether it worked for him or not.
This is awesome gonna try tonight. Thanks bro. Got this link from the saber 32.2uc kernel thread you posted in.
Sent from my SCH-I605 using Xparent BlueTapatalk 2
sshafranko said:
This is awesome gonna try tonight. Thanks bro. Got this link from the saber 32.2uc kernel thread you posted in.
Sent from my SCH-I605 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
Cool let me know
ytj87 said:
I hadn't looked into Master too much because of the lack of multiwindow, but read in the dev thread that it was working past a certain version. So multiwindow (and this thread's particular mod) does indeed work on 16 for you?
Click to expand...
Click to collapse
I can confirm Master 16 has multi window. As did master 14.
Not to mention those screenshots are proof as well
Sent from my Jedi Master Galaxy Note II
Works great on omega rom v18 ..great work keep it coming. ..
Sent from my GT-N7100 using Tapatalk 2
psycho4us4 said:
This was done and tested on master 16
Click to expand...
Click to collapse
Duh, didn't realize you were the OP!
Works perfect here. Only thing i noticed is on my lockscreen the icons are tiny like in the flashbar. Thanks for this awesome work
Sent from my SCH-I605 using Xparent BlueTapatalk 2
sshafranko said:
Works perfect here. Only thing i noticed is on my lockscreen the icons are tiny like in the flashbar. Thanks for this awesome work
Sent from my SCH-I605 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
I turn my lock screen off. Thanks for the info.
Just saw this too. It changed my power menu. Ill post a ss if you need.
Sent from my SCH-I605 using Xparent BlueTapatalk 2
sshafranko said:
Just saw this too. It changed my power menu. Ill post a ss if you need.
Sent from my SCH-I605 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
Nope mine too. It's definately not perfect as stated in op.
ytj87 said:
Works perfectly on Tweaked 2.4.1.
Now to try connecting this via HDMI to a 1080p monitor and, using a bluetooth mouse and KB, make this a portable PC.
Click to expand...
Click to collapse
What version phone do you have w tweaked rom?
Ash359 said:
I can confirm Master 16 has multi window. As did master 14.
Not to mention those screenshots are proof as well
Sent from my Jedi Master Galaxy Note II
Click to expand...
Click to collapse
Have you tried this? What phone do you have?
sshafranko said:
Just saw this too. It changed my power menu. Ill post a ss if you need.
Sent from my SCH-I605 using Xparent BlueTapatalk 2
Click to expand...
Click to collapse
I'd be curious to see a screenshot
dwitherell said:
I'd be curious to see a screenshot
Click to expand...
Click to collapse
dwitherell said:
I'd be curious to see a screenshot
Click to expand...
Click to collapse
Here u go guys thats the new power menu. With this mod
..
Sent from my GT-N7100 using Tapatalk 2
So far, I have enabled 4 way reboot. everything seems to be fine so far. I'm on the supplied stock rom. Taking this slowly as I do not want to encounter something I can't repair. As knox is tripped, you know the rest...
also I have reduced dpi to 300 from standard 320. Will try 280
Charlie
update, 280 seems fine as well...
obviously root is needed
Reducing the dpi scales the fonts and other ui elements down, right? Could you show a screen shot?
Sent from my SCH-I545 using Tapatalk
Buji said:
Reducing the dpi scales the fonts and other ui elements down, right? Could you show a screen shot?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
It does. However, you need to be careful as to how low (small) you want things to be. Proceed slowly and reboot frequently, as this is a new devise and we do not know the limits of the os. If you crash it, your only recourse will be odin; and sometimes it doesn't work
Can't post a screen shot now as I'm preparing for tomorrow's classes...When I get a chance, I will though
Charlie
PS
What do you want to see in action?
callif said:
It does. However, you need to be careful as to how low (small) you want things to be. Proceed slowly and reboot frequently, as this is a new devise and we do not know the limits of the os. If you crash it, your only recourse will be odin; and sometimes it doesn't work
Can't post a screen shot now as I'm preparing for tomorrow's classes...When I get a chance, I will though
Charlie
PS
What do you want to see in action?
Click to expand...
Click to collapse
What is the default dpi that it comes with?
callif said:
What do you want to see in action?
Click to expand...
Click to collapse
Eh... not sure really as anything you might have wouldn't necessarily be sw that I would have... maybe gmail, the s calendar, or chrome on amazon...
Sent from my SM-P900 using Tapatalk
flipper2006 said:
What is the default dpi that it comes with?
Click to expand...
Click to collapse
320
I've been trying to customize the quick settings section of the notification shade using wanam but haven't had luck getting all components to change colors. The light background of the volume control seems to be tied to a variable not in the theme section as is the green indicators (the color I hate most on the quick settings tiles).
270 DPI is an excellent resolution. See mine below. PLENTY of real estate on that screen now! Oh yeah. And still got room for more.
A good app that I've tested and used is: jrummy app called "ROM toolbox Pro" however only for changing the DPI. Usually I just edit the build.prop file as well too. Xposed installer using the module "App settings" works perfectly to do this.
Here's the link:
https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolboxpro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
Not sure whether or not to start a new thread so I'll post an update here.
This is a short list of Xposed Framework modules that I'm currently running on my Note Pro in addition to Wanam.
Activity Force New Task
App Settings
Boot Manager
CrappaLinks
Custom Share
Disable Clear Defaults Diallog
Disable Location Consent
Enable BatteryStats Permission
Gesture Navigation
Greenify
MinMinGuard
Sansung Alt Symbols
Tinted Status Bar
Xposed Recent Tasks Ram
Youtube Adaway
Really love having Xposed on this thing.
Android.Ninja said:
270 DPI is an excellent resolution. See mine below. PLENTY of real estate on that screen now! Oh yeah. And still got room for more.
A good app that I've tested and used is: jrummy app called "ROM toolbox Pro" however only for changing the DPI. Usually I just edit the build.prop file as well too. Xposed installer using the module "App settings" works perfectly to do this.
Here's the link:
https://play.google.com/store/apps/details?id=com.jrummy.liberty.toolboxpro
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button.
Click to expand...
Click to collapse
Hi, where do I find the setting for dpi in toolbox?
THX
It's in the performance section, build prop editor, near the bottom, ro.sf.lcddensity. stock is 320.
Sent from my SM-P900 using Tapatalk
muzzy996 said:
It's in the performance section, build prop editor, near the bottom, ro.sf.lcddensity. stock is 320.
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
THX! 270 is perfect.
I think you should open a new thread
muzzy996 said:
Not sure whether or not to start a new thread so I'll post an update here.
This is a short list of Xposed Framework modules that I'm currently running on my Note Pro in addition to Wanam.
Activity Force New Task
App Settings
Boot Manager
CrappaLinks
Custom Share
Disable Clear Defaults Diallog
Disable Location Consent
Enable BatteryStats Permission
Gesture Navigation
Greenify
MinMinGuard
Sansung Alt Symbols
Tinted Status Bar
Xposed Recent Tasks Ram
Youtube Adaway
Really love having Xposed on this thing.
Click to expand...
Click to collapse
Hello,
I am a newb in the whole android community (1 month use, but i am a quick learner).
I have already rooted my SGNP and I am trying to research more about what i can and what i can NOT configure in my Note Pro.
For example, thanks to your post here I learned that someone else tried to install Xposed with the Wanam module.
I search a lot for more post of this kind and came up with almost nothing so thats why i think that it will be much appreciated if there will be more sharing of experienced SGNP users of Xposed modules that are safe to use.
I think that my main concern is the lack of understanding about compatibility between other android devices. For example: Can i search for a specific module and find that it works on Galaxy Note 3 and know that it will also work on my Note Pro?
If anyone can help more with links for:
SGNP apps for rooted device
SGNP Xposed modules
SGNP custom ROMs
SGNP Bloatware system apps that can be uninstalled
Thank you for sharing your knowledge
Ray
Primarily what I look for when installing Xposed modules on my Note Pro is feedback in both the description in Xposed Installer for the module and in the XDA support thread for that module on whether or not it's compatible with Touchwiz. If either sources say to stay away I heed that warning.
I'd say if you're unsure of compatibility of a module it doesn't hurt to ask here to see if anyone else has installed it.
As far as bloatware removal I've been hesitant to do so; I've frozen a bunch of things but the only applications/services that I've deleted outright is Knox related ones since freezing those would not stop their services from loading up as cached apps. My issue with trying to uninstall things is I don't want to have to rebuild all of my customizations if I have to factory reset, nor do I want to take the time to do nandroid backups prior to every tweak just to see if the tweak works.
fokus said:
THX! 270 is perfect.
Click to expand...
Click to collapse
Did it cause any serious incompatibilities or bugs with play store or certain apps?
Apparently it breaks the keyboard. [email protected] it, why should I be the last to know?
Apparently the only thing that works is to change dpi to individual apps (like the launcher and and)...
Stevethegreat said:
Apparently it breaks the keyboard. [email protected] it, why should I be the last to know?
Apparently the only thing that works is to change dpi to individual apps (like the launcher and and)...
Click to expand...
Click to collapse
Did u try installing a custom keyboard after dpi change, like smartkeyboard pro or any other?
Question: I've made the DPI 270 and the icons are indeed a bit smaller, however now I have a large dead space at the bottom of the screen and also the homescreen. Is there any way to extend the Grid or something? I know the area is usable because I've used Nova and Apex and can use the entire screen, but I'm trying to use the TW Launcher. Screenshot attached.
tdetroit said:
Question: I've made the DPI 270 and the icons are indeed a bit smaller, however now I have a large dead space at the bottom of the screen and also the homescreen. Is there any way to extend the Grid or something? I know the area is usable because I've used Nova and Apex and can use the entire screen, but I'm trying to use the TW Launcher. Screenshot attached.
Click to expand...
Click to collapse
As the expression goes, you can't teach an old dog new tricks . . TW launcher may have the new magazine UX feature but as far as custom grid sizes to leverage more screen space you're SOL. Switch to Nova or Apex or some other custom launcher.
muzzy996 said:
As the expression goes, you can't teach an old dog new tricks . . TW launcher may have the new magazine UX feature but as far as custom grid sizes to leverage more screen space you're SOL. Switch to Nova or Apex or some other custom launcher.
Click to expand...
Click to collapse
Yeah, I figured as much, but it was worth trying. Back to Nova I go....
After rooting the ATT 810 G4, I figured I'd go ahead and change the DPI settings through the build.prop. This has been a great improvement of the UI experience, however it looks like the QuickCircle app becomes unusable. Just wondering if anyone else has changed the DPI setting and knows how to keep the normal DPI setting for the QuickCircle app. It seems like per app DPI would be the way to go, but I'm not quite sure how to achieve that right now on the G4. Many thanks in advance!
Without xposed, it's quite difficult to change individual app dpi
skeliton lord said:
Without xposed, it's quite difficult to change individual app dpi
Click to expand...
Click to collapse
That seems to be the case. Thanks. I think I'll be waiting until xposed comes out for the G4 until I start using my circle case again.
willmayah said:
That seems to be the case. Thanks. I think I'll be waiting until xposed comes out for the G4 until I start using my circle case again.
Click to expand...
Click to collapse
I've found that if you use a digital clock for it just the white circle is off Center (accuweather one works fine)
The weirdest thing about this is that the call handling part of the quick circle (I.e. if you are on a call, the phone is ringing etc.) fits absolutely fine.
The circle highlight swish (technical term) doesn't line up either, but the call stuff does. Very odd
Has anyone figured out how to get the circle highlight light working the correct way?
I got the clock aligned correctly but i didnt find the app responsible for the light circle.
/edit
Got it
These are the apps which i changed to stock DPI via App Settings:
com.lge.lockscreensettings
com.lge.provider.lockscreensettings
com.lge.sui.widget
com.lge.smartcover
com.lge.clock
in note 9 When you changing the screen size the size of the status bar icons Also change. but in note 10 the status bar is very small and not changed. is there a method to increase it.
Lol, I did everything to get rid of them... never saw any size adjustment for them.
In fact, I increased the dpi value just to make them smaller! Now I can get 12 in the left part!
winol said:
In fact, I increased the dpi value just to make them smaller! Now I can get 12 in the left part!
Click to expand...
Click to collapse
I didn't understand what you mean ... what does this have to do with my topic of making icons bigger
absentsound said:
I didn't understand what you mean ... what does this have to do with my topic of making icons bigger
Click to expand...
Click to collapse
Just pointing out the irony of what is unwanted for someone, it is desirable for others, anyway, good luck
Well start searching Playstore; "big stutus bar icons"
If you do find an app to do it, it may cost you system stability. Backup your data; it's not a good plan to needlessly install/uninstall apps.
I don't think it's easily doable... but who knows?
Lol, I've been trying to kill the page indicator icons for a year. 3rd party launchers can do this, but an unstable one cost me 2 hard resets by causing a boot loop.
Good luck...
Thanks..I found a great app(super status bar gesture) but it has a problem sometimes its notification bar disappears and original notification bar appears. Also icons cannot be moved. It is not possible to increase the size of the icons, but their size is rather large.
You are welcome.
Are there specific function(s) that you need to be able to see?
There may be a better way...
absentsound said:
in note 9 When you changing the screen size the size of the status bar icons Also change. but in note 10 the status bar is very small and not changed. is there a method to increase it.
Click to expand...
Click to collapse
Hi @absentsound
Seems that, as you have already noticed, there is no easy solution for your request.
What I can suggest, that will have a reasonable chance of success, is the "do it yourself" option. This only requires that you are rooted and eager to fly toward new horizons
The system component that draws the statusbar is SystemUI.apk and, inside it, you will find the images (all the "/res/drawable/sec_stat_sys_*.spr" files) and several XML files that coordinate the overall layout.
Rooted or not, to start inspecting it, navigate to and copy the following file to your desktop
Code:
/system/priv-app/SystemUI/SystemUI.apk
Now you can rename it to .zip and extract or just view its contents. You will not be able to edit the files per se as they are "compiled" (don't mind now with this term).
So, as I said, it's doable and just requires will. If you say so, we all may be able to guide you through the process.
Best regards.
Kdio said:
Hi @absentsound
Seems that, as you have already noticed, there is no easy solution for your request.
What I can suggest, that will have a reasonable chance of success, is the "do it yourself" option. This only requires that you are rooted and eager to fly toward new horizons
The system component that draws the statusbar is SystemUI.apk and, inside it, you will find the images (all the "/res/drawable/sec_stat_sys_*.spr" files) and several XML files that coordinate the overall layout.
Rooted or not, to start inspecting it, navigate to and copy the following file to your desktop
Code:
/system/priv-app/SystemUI/SystemUI.apk
Now you can rename it to .zip and extract or just view its contents. You will not be able to edit the files per se as they are "compiled" (don't mind now with this term).
So, as I said, it's doable and just requires will. If you say so, we all may be able to guide you through the process.
Best regards.
Click to expand...
Click to collapse
Thank you very much for your keen interest..Root option I am trying to avoid. I tried it on the Note 9 .. Yes, you get full control and you will be able to install a custom ROM, but you will face a problem with the bank app and the security folder and warranty on the device. I am trying to search for an alternative option, a new Note 10 device since very few days.
There is an inquiry ... my device is still on Android 9 and I do not want to adventure and upgrade to Android 10 sixth security update because I cannot return after that ... because Android 10 does not support programs to change Arabic font such as wings font-gxfont . and the original Arabic fonts from Samsung are very bad.
any one has android 10 sixth security update Did you not notice the increase in the size of the status bar icons when increasing the size of the screen to the maximum? Was this problem solved in the latest update?
absentsound said:
any one has android 10 sixth security update Did you not notice the increase in the size of the status bar icons when increasing the size of the screen to the maximum? Was this problem solved in the latest update?
Click to expand...
Click to collapse
Hi @absentsound
I did try lowering the DPI at Settings / Developer options / Drawing / Minimum width. My default value was 411dp and I've changed, just for fun, to 300dp. Everything got bigger BUT the statusbar ... so it's a no go for your request.
I'm not rooted too but it is, unfortunately, the prerequisite to the only solution I can propose.
Good luck on your quest.
Nice regards.
.
You could use individual apps/widgets to replace them.
I use the Energy Ring to replace the battery indicator..
Other than that my stutus bar is black. Everything else I need is on the pull down notifications.
Like you I'm still running Pie; Q is a downgrade for me.
Kdio said:
Hi @absentsound
I did try lowering the DPI at Settings / Developer options / Drawing / Minimum width. My default value was 411dp and I've changed, just for fun, to 300dp. Everything got bigger BUT the statusbar ... so it's a no go for your request.
I'm not rooted too but it is, unfortunately, the prerequisite to the only solution I can propose.
Good luck on your quest.
Nice regards.
.
Click to expand...
Click to collapse
in my device default DPI is in 320. I try down the number, but is did not accept less
blackhawk said:
You could use individual apps/widgets to replace them.
I use the Energy Ring to replace the battery indicator..
Other than that my stutus bar is black. Everything else I need is on the pull down notifications.
Like you I'm still running Pie; Q is a downgrade for me.
Click to expand...
Click to collapse
only a battery indicator .. Unfortunately, there is no application that displays all indicators (wifi - signal-clock-battery ...).
Thank you, my friends, for trying and suggestions
absentsound said:
in my device default DPI is in 320. I try down the number, but is did not accept less
only a battery indicator .. Unfortunately, there is no application that displays all indicators (wifi - signal-clock-battery ...).
Thank you, my friends, for trying and suggestions
Click to expand...
Click to collapse
Custom widget apps. Here's a write up on one.
https://www.google.com/amp/s/www.androidauthority.com/zooper-widget-tasker-2-386804/amp/
There are more...
I think for make quick setting panel toggle. not for status bar icons
blackhawk said:
Custom widget apps. Here's a write up on one.
https://www.google.com/amp/s/www.androidauthority.com/zooper-widget-tasker-2-386804/amp/
There are more...
Click to expand...
Click to collapse
absentsound said:
in my device default DPI is in 320. I try down the number, but is did not accept less
only a battery indicator .. Unfortunately, there is no application that displays all indicators (wifi - signal-clock-battery ...).
Thank you, my friends, for trying and suggestions
Click to expand...
Click to collapse
absentsound said:
I think for make quick setting panel toggle. not for status bar icons
Click to expand...
Click to collapse
The idea is to use widgets to replace the icons.
There is an app called "time and memo" is a very old one, but works surpringsingly well, it allows to display several things, can be out anywhere on the screen, is of the floating type, can be adjusted in size and color for each indicator, also you can choose when to be shown or not, it might be useful for op, there is another one called "cool tool" which is somewhat alike time and memo, but has some other functions, take a look
Cool Tool looked real promising but can't even run right on Pie.
It was a mess. Played with it for close to 30 minutes.
It couldn't set itself for accessibility permissions, a reboot and 2 data resets didn't help.
It's overlay display was uncontrollable and couldn't show battery current, net bandwidth, cell strength and so on.
Not a prayer for it running on Q...
Thank you for your cooperation ... What do you think about this? I think I have come up with the ideal program ..super status bar. paid
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
blackhawk said:
Cool Tool looked real promising but can't even run right on Pie.
It was a mess. Played with it for close to 30 minutes.
It couldn't set itself for accessibility permissions, a reboot and 2 data resets didn't help.
It's overlay display was uncontrollable and couldn't show battery current, net bandwidth, cell strength and so on.
Not a prayer for it running on Q...
Click to expand...
Click to collapse
, that is really odd, I installed it in my note10+ when running pie, and it keeps working now in Q, I use it to this very day!