Develop Bugs

GN not starting

hi,
i need help my GN is not starting after I flashed a theme all i can just get into clock mode recovery even i didn't have any back up or any restore point it just shows google logo when i start. Please helppppppppppppppppppp pleaseeeeeee
thankzzz
now i am stuck on below attachment please help thnkzz so much for all reply till now

since you didn't do a Android your basically screwed so all you data is gone you only hope is to transfer a file through fastboot(can you even do that?) Or boot to Odin mode and flash a stock image
Sent from my Galaxy Nexus using XDA App

GSM or LTE Gnex? What ROM were you running?

Golden rule: Do a backup before doing anything to your phone!
Now all you can do is to download EXACTLY same ROM as you were using by now, wipe cache/dalvik-cache, flash this ROM once again and hope that i'll boot. If it won't you'll have to wipe /data is well.

Sleuth255 said:
GSM or LTE Gnex? What ROM were you running?
Click to expand...
Click to collapse
HI
its gsm i tried to flashed the same rom but still the same only i can access is to recovery

cordell507 said:
since you didn't do a Android your basically screwed so all you data is gone you only hope is to transfer a file through fastboot(can you even do that?) Or boot to Odin mode and flash a stock image
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
tnkz bro but i am new to android please help how to do it with Odin

well since you can boot into recovery try searching in your sdcard folders if youve left a ROM .zip there laying around and if this is the case just flash it and youre back on track

nonione said:
well since you can boot into recovery try searching in your sdcard folders if youve left a ROM .zip there laying around and if this is the case just flash it and youre back on track
Click to expand...
Click to collapse
unfortunatly i delete system file and data file also in recovery i tried to flash the zip update but no result helpppppppppppppppp

salym said:
unfortunatly i delete system file and data file also in recovery i tried to flash the zip update but no result helpppppppppppppppp
Click to expand...
Click to collapse
This will help you get back to stock
http://forum.xda-developers.com/showthread.php?t=1392310
Sent from my GNex {GSM} T-Mobile

Change your spark plugs.
Sent from my Nexus in Texas.

spaceman860 said:
This will help you get back to stock
http://forum.xda-developers.com/showthread.php?t=1392310
Sent from my GNex {GSM} T-Mobile
Click to expand...
Click to collapse
Hi bro i tired with Odin but stops on userdata any help thnkzzzz

salym said:
hi,
i need help my GN is not starting after I flashed a theme all i can just get into clock mode recovery even i didn't have any back up or any restore point it just shows google logo when i start. Please helppppppppppppppppppp pleaseeeeeee
thankzzz
Click to expand...
Click to collapse
i am stuck on this now please help

ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!

Sleuth255 said:
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Click to expand...
Click to collapse
Still have a bootloader? Are you serious? You need to learn how to use an android device as well.
To the OP: Do a factory reset in Clockwork and go to mounts
and format /system. Flash the ROM zip. Profit.

Absolutely serious. Have you been reading this thread? The OP needs to start at ground zero and stop just trying every tool he/she sees. My purpose was to get this person to do some research and I was establishing a knowledge baseline. One plan I was considering was to help the OP install the GNex toolkit then locate stock images and obtain a working build. Your cryptic one liner bit should prove vastly more useful to this guy though. I'll let you have at it and go back to my dev work. lol at least this post was a good way to make sure gapps/root capabilities are properly cooked into my latest test build ....
Sent from my Full AOSP on Toro using xda premium

Sleuth255 said:
ouch... softbrick.
put your phone down.
take a deep breath or two.
If you are old enough, grab a beer and relax for a bit. Think calming thoughts.
Now, start learning about how to mod your GNex. We can help.
Here's your First assignment:
find out if you still have a bootloader by booting into fastboot mode. Report back with your findings and a screenshot!
Click to expand...
Click to collapse
U r right i am not good in android but i tried to be and this happens, meanwhile nothing shows after i start the device it shows the !!!! mark with device the PC logo,this happens due to ODin actually the SUMSUNG ADB interface shows ! mark because i cant debug from device even no bootloader works any more thnkz for replying

*facepalm*
OP, you are holding it wrong.
I can think of at least 2 ways to recover from a situation like this. Both are well described in these forums (search works 99% of the time).
....
Oh come on, you don't have the zip of the last rom you flashed, get another one, hey, its free right? **** we dont know nothing about but we'll flash it anyways!
Man...If you have cwm recovery, you're safe. No need to go messing with fastboot (forget odin) just yet. Now stop wasting everybody's time and learn to help yourself.
Here's a few tags to get you started:
cwm, recovery, adb, bootloader, fastboot

bk201doesntexist said:
*facepalm*
OP, you are holding it wrong.
I can think of at least 2 ways to recover from a situation like this. Both are well described in these forums (search works 99% of the time).
....
Oh come on, you don't have the zip of the last rom you flashed, get another one, hey, its free right? **** we dont know nothing about but we'll flash it anyways!
Man...If you have cwm recovery, you're safe. No need to go messing with fastboot (forget odin) just yet. Now stop wasting everybody's time and learn to help yourself.
Here's a few tags to get you started:
cwm, recovery, adb, bootloader, fastboot
Click to expand...
Click to collapse
i tried more than one day on this issue its only starts with !!! mark on it nothing else, i have attached the pic i cant access any bootloader or any cwm or any thing all i did with Odin and stuck to attached pic even i start the device its shows the same pic.
http://www.youtube.com/watch?v=WdM2M8Nz6QQ this I used on Odin
thnkzz

As I suspected earlier, it appears that the OP may have trashed his bootloader partition when he tried using Odin to flash the 4.0.2 factory image (which includes a bootloader). At one point he had CWM but not any more since he can't boot to the recovery partition.
Another possibility is that the Odin tool itself places the device in this mode and it can't be manually reverted by starting up in fastboot mode. Looking at the picture, it literally appears that the phone is saying that a flashing operation is half finished but the phone has lost the PC connection... This would be a lot like what I've experienced with iPhones.
In either case, I can deduce that Odin is the tool to use to clear this softbrick.
Hopefully, it'll be flame-off now Sdobron. Perhaps you might want to help out here since I'm not up to speed on the Odin tool myself and would like to learn more about it.
@salym: I know this may be redundant but I need to establish your problem baseline empirically. Once again, can you verify that when you hold vol down/vol up then press power that you get the image you posted?

Use Fastboot!
Dude, it looks like your problem is with crappy boot sector.
While turning on your phone, hold both volume up and volume down buttons, and long press power button untill you feel single vibrate feedback.
Then connect your phone to the computer via USB, and if it doesn't detect drivers, google "samsung android usb driver". Additionally you can install PDANet application (X64 or x86 depending on you system).
THen download Fastboot - there are plenty of instructions how to flash it, and flash stock images (that come with radio, boot sector, rom itself, etc) - there are also plenty of discussions about how to do it. PM if you have any other questions!

Stuck on Samsung screen

I saw a couple people had the same issue that im now having but none of there solutions solved my problem
i wiped my GS3 for ATT tried to go back to a stock with root rom and when it rebooted it now just hangs at the samsung logo at boot tried re-flashing via odin with no luck also tried flashing a CWM.tar since i cant get into stock or CWM recovery to flash from there is there something im missing i know its late and maybe my brain isnt working like it should

Solved the problem myself.....and rather then just say i figured it out ill share how i did this since i watched countless videos and read endless amounts of threads and since none of them helped mem
First also try t put your phone into stock recovery mode and wipe your phone then flash this should take care of things if it doesnt try what i tried below
and i hope this can help someone else out there who has the same problem that i had all you have to do is the following i did this with obviously an AT&T model should work with others but as always try at your own risk.....
First make sure your battery has a charge even if its stuck on the boot screen its still charging....
then download KIES from samsung update it and make sure you have the latest version.
Next plug in your phone if your stuck at the samsung screen your computer will recognize your phone still at least it did with mine.
Once your done with the above open up KIES goto the top and then TOOLS and Firmware upgrade click on that enter your phone model (ATT SGH-I747) i dont get this part but next it will ask you for your SN and for some reason it doesnt recognize the SN use your IMEI
Now it should ask you a couple questions tell you its wiping your device and you will lose everything etc.....but then it will download the latest FW and begin to install everything and in about 20-25 mins everything will be back to stock

Nvm.. misread.

I'm stuck too...and Kies can't find the phone. Anyone have any other ideas? I can't even get into recovery...only download mode.

dbdynsty25 said:
I'm stuck too...and Kies can't find the phone. Anyone have any other ideas? I can't even get into recovery...only download mode.
Click to expand...
Click to collapse
your computer is not seeing your phone when you plug it in or its just KIES that doesnt see it??
also im guessing you have all the correct drivers installed??

yearziro said:
your computer is not seeing your phone when you plug it in or its just KIES that doesnt see it??
also im guessing you have all the correct drivers installed??
Click to expand...
Click to collapse
Yes, all drivers are installed because that's how I ODIN flashed it in the first place! Just stuck on the damn Samsung screen and I can't get Kies to connect to the phone. Not in Download Mode or when it's just stuck on that screen.

you can just hold VOL UP, HOME , POWER same time enter stock samsung recovery mode and scroll down select wipe data and cache and reboot u should good to go....

whit3gh0szt said:
you can just hold VOL UP, HOME , POWER same time enter stock samsung recovery mode and scroll down select wipe data and cache and reboot u should good to go....
Click to expand...
Click to collapse
Worked, thanks! I appreciate it.

it doesnt work on mine
dbdynsty25 said:
Worked, thanks! I appreciate it.
Click to expand...
Click to collapse
my cellphone reboots by itself on the samsun screen and i cant get on the recovery mode! any ideas!"

me neither
mkstf said:
my cellphone reboots by itself on the samsun screen and i cant get on the recovery mode! any ideas!"
Click to expand...
Click to collapse
Yeah I can't get into recovery either, and its getting really annoying.

indieslap said:
Yeah I can't get into recovery either, and its getting really annoying.
Click to expand...
Click to collapse
With the phone off, hold down VOL UP + HOME + POWER until the phone vibrates. Then let go of the power button. When you see the blue text in the top left corner of the samsung boot screen, let go of the other 2 buttons

xBeerdroiDx said:
With the phone off, hold down VOL UP + HOME + POWER until the phone vibrates. Then let go of the power button. When you see the blue text in the top left corner of the samsung boot screen, let go of the other 2 buttons
Click to expand...
Click to collapse
Okay, this brought the menu up for me, but I removed the data,cache, and reset the phone and it is still not working. Also, my phone just goes black after the Galaxy Samsung S3 logo, but the blue light in the top left is still on. Can anyone help me out?
P.S. Sorry for reviving this thread if it is too old.
Edit: I should also mention that I can still hear the sound of the phone booting up (the sound that typically occurs when the phone is on the white loading screen). However, the screen is black at this point.

cabato said:
Okay, this brought the menu up for me, but I removed the data,cache, and reset the phone and it is still not working. Also, my phone just goes black after the Galaxy Samsung S3 logo, but the blue light in the top left is still on. Can anyone help me out?
P.S. Sorry for reviving this thread if it is too old.
Edit: I should also mention that I can still hear the sound of the phone booting up (the sound that typically occurs when the phone is on the white loading screen). However, the screen is black at this point.
Click to expand...
Click to collapse
You're going to have to tell us what you did (changed, flashed, etc) before all this so that we can help you

xBeerdroiDx said:
You're going to have to tell us what you did (changed, flashed, etc) before all this so that we can help you
Click to expand...
Click to collapse
Ah, sorry about not providing enough information. Please keep in mind that I am very inexperienced and I may get some things incorrect just due to that. To my understanding, I went to try and root my phone, but beforehand I used the guides below to get my phone ready for the root (yes I do realize at this point that using these outdated guides was a clear mistake and I should have come to XDA instead). I flashed my phone to the stock kernel using the file that site provided, and then encountered the problem above. In my panic I have tried to restore the phone through several methods, but every time I try to load anything onto it with Odin, it doesn't complete until my phone restarts (and my phone won't boot up completely) so I can't get the pass message. Interestingly enough I did manage to get clockwork mod installed as that is what shows up when I try a secure boot using the methods that you described.
Ah, I am unfortunately not allowed to post links. The guides were off of Android Authority.
If there is any other information needed to help me please let me know and I will do my best to obtain it.

cabato said:
Ah, sorry about not providing enough information. Please keep in mind that I am very inexperienced and I may get some things incorrect just due to that. To my understanding, I went to try and root my phone, but beforehand I used the guides below to get my phone ready for the root (yes I do realize at this point that using these outdated guides was a clear mistake and I should have come to XDA instead). I flashed my phone to the stock kernel using the file that site provided, and then encountered the problem above. In my panic I have tried to restore the phone through several methods, but every time I try to load anything onto it with Odin, it doesn't complete until my phone restarts (and my phone won't boot up completely) so I can't get the pass message. Interestingly enough I did manage to get clockwork mod installed as that is what shows up when I try a secure boot using the methods that you described.
Ah, I am unfortunately not allowed to post links. The guides were off of Android Authority.
If there is any other information needed to help me please let me know and I will do my best to obtain it.
Click to expand...
Click to collapse
Sounds like you need to clear your cache partition and clear your dalvik cache. There are several guides on this site to help you. Choose the one that is most appropriate to what you are trying to do and follow it EXACTLY. There is one to start. Follow it from the beginning.
http://forum.xda-developers.com/showthread.php?t=2042775

When nothing else works start over from search. You cab use download mode? First make sure you got right drivers as that can mess up Odin. Use one in my Sig if you want. Then flag stock recovery with root someone nice will part a link to it I'm on my phone can't do it. Well fix your phone
Sent from my SGH-I747 using xda premium

allow rldcess
Okay now I am running into another problem. I have tried downloading the drivers from many different places and they always seem to be correctly downloaded. That being said, I can't install the drivers after I plug my phone into the computer (after downloading and installing Samsung USB drivers). Therefore, I cannot access my phone storage to put the root zip file on it. I was still able to download the custom recovery.
Now I have gone to a different computer, and the drivers seem to install correctly, but the phone still does not appear under my computer.
Edit: I do already have a root zip file on my phone from my earlier attempt, but I install it and my phone still doesn't load up. Also, Odin still recognizes the phone.
Edit 2: Windows says that the drivers cannot recognize the device. Edit 3: "Hardware ID Missing"

Bump
Sorry, I really need help for this. I can't install the MTP drivers even through using some of the tips on this site. That seems to be the problem with me accessing the phones storage from my computer. Does anyone have an ideas for what else I could do? Should I just take it to the store and hope they can fix it?

cabato said:
Okay now I am running into another problem. I have tried downloading the drivers from many different places and they always seem to be correctly downloaded. That being said, I can't install the drivers after I plug my phone into the computer (after downloading and installing Samsung USB drivers). Therefore, I cannot access my phone storage to put the root zip file on it. I was still able to download the custom recovery.
Now I have gone to a different computer, and the drivers seem to install correctly, but the phone still does not appear under my computer.
Edit: I do already have a root zip file on my phone from my earlier attempt, but I install it and my phone still doesn't load up. Also, Odin still recognizes the phone.
Edit 2: Windows says that the drivers cannot recognize the device. Edit 3: "Hardware ID Missing"
Click to expand...
Click to collapse
go to your device manager on your computer, locate samsung drivers for your device, uninstall them
restart your computer
then plug in the phone and lets it reinstall by itself

Use my drivers in my signature
They are last good damaging drivers. Don't update them but install them and plug phone in with no internet. after install plug internet in. There good stable drivers
Sent from my SAMSUNG-SGH-I747 using xda premium

Bricked s4

so i tried rooting my phone and it bricked...i had the "recovery in kies " error but now i got the screen blocked in boot ..than i tried to install costum roms using odin but aparently odint doesn't work....i had this same problem on my s2 and i solved it but now i cant solve this anymore...i have read about this on other threads but i couldnt fix it...i can only put my phone on download mode ...i dont know what to do anymore since odin doesnt work at all ( it keeps saying fail) ..i got the drivers installed ..please some1 help me i've spent 5 hours trying to solve this ..and now again i get the firmware upgrade encountred an issue .....but as i said cant solve it with samsung kies

smeen23 said:
so i tried rooting my phone and it bricked...i had the "recovery in kies " error but now i got the screen blocked in boot ..than i tried to install costum roms using odin but aparently odint doesn't work....i had this same problem on my s2 and i solved it but now i cant solve this anymore...i have read about this on other threads but i couldnt fix it...i can only put my phone on download mode ...i dont know what to do anymore since odin doesnt work at all ( it keeps saying fail) ..i got the drivers installed ..please some1 help me i've spent 5 hours trying to solve this ..and now again i get the firmware upgrade encountred an issue .....but as i said cant solve it with samsung kies
Click to expand...
Click to collapse
If you can put your phone in download mode you're not bricked.
Use Odin to get back to stock
http://forum.xda-developers.com/showthread.php?t=2258628
Once that is done use CF Root to root with Odin
http://forum.xda-developers.com/showthread.php?t=2294005

baseballfanz said:
If you can put your phone in download mode you're not bricked.
Use Odin to get back to stock
http://forum.xda-developers.com/showthread.php?t=2258628
Once that is done use CF Root to root with Odin
http://forum.xda-developers.com/showthread.php?t=2294005
Click to expand...
Click to collapse
i still get fail from odin....thats actually the thing i dont get....can it be from drivers?

Are you using the cable that came with the phone? I had the same problem and its because I was using another cable. If Odin isn't working. Kies should work as well. P.m. me if you need more help.
Sent from my SGH-M919 using XDA Premium 4 mobile app

eddies92 said:
Are you using the cable that came with the phone? I had the same problem and its because I was using another cable. If Odin isn't working. Kies should work as well. P.m. me if you need more help.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yes i am using the cable....and my problem keeps switching from firmware issue to stuck at boot....i tried with kies but it doesnt recognize my phone when i try emergency firmware recovery and when i try firmware upgrade and initialisation it says that it need 6gb free and i dont have enough space....i installed kies in another partition where i have 43gb free and still that error

smeen23 said:
yes i am using the cable....and my problem keeps switching from firmware issue to stuck at boot....i tried with kies but it doesnt recognize my phone when i try emergency firmware recovery and when i try firmware upgrade and initialisation it says that it need 6gb free and i dont have enough space....i installed kies in another partition where i have 43gb free and still that error and btw when i connect my phone to kies it says connecting... and i et to troubleshot the error and when i do it replace the driver over and over...thats why i assumed it from drivers..i already inatlled the drivers from different places but still nothing
Click to expand...
Click to collapse

smeen23 said:
yes i am using the cable....and my problem keeps switching from firmware issue to stuck at boot....i tried with kies but it doesnt recognize my phone when i try emergency firmware recovery and when i try firmware upgrade and initialisation it says that it need 6gb free and i dont have enough space....i installed kies in another partition where i have 43gb free and still that error
Click to expand...
Click to collapse
If you are stuck in a bootloop after running the recovery file in odin (it's 1.6 GB unzipped), which is the way things sound, pull the battery and go into stock recovery. Do this by replacing the battery, holding volume up, home, and power button until the ble recovery shows in the upper left then let go. In stock recovery, scroll down 9using volume button) to wipe data/factory reset. Coose that option with the power button. You will lose ALL data on your phone and you will have to go thru setup again. When it's done choose reboot in the menu and let it reboot. Don't freak if it takes a while. In a minute or 2 you will see the screen dim and it will boot. Go thru setup, root again, install custom recovery, and if you were wise enough to have done a backup tp your SD card, you can get it back.
Good luck, there are tutorials on Youtube if you care to search for them. Here's a good one -
http://youtu.be/yEJSv9MrVAg

@getsum
Good suggestion :good:
I think the issue is that he's making things more complicated than he needs to.
A step by step by the op would be helpful if your suggestion doesn't resolve the issue
---------- Post added at 01:51 AM ---------- Previous post was at 01:39 AM ----------
Op, you're a little confusing.
Are you able to successfully use ODIN and flash stock firmware, but get stuck in a boot loop or freeze on Samsung splash?
Or ODIN fails?
From you're posts it sounds like both issues are occurring, but I think it's a posting conflict, and your issue is one or the other, unless I'm wrong, which I've been before

when i try recovery it goes to boot saying loading recovery than it goes full off and after boot screen again...i tried twrp and still nothing but the good thing is that odin passed that ..the only thing it didnt fail....maybe i didnt have the right rom ...i am downloading the official i9505 rom and i hope it will work this time....but plz if any1 can help i would apriciate it

Odin problem
I am also having a odin problem. I have tried jdownloader2 as well. Everything is giving me an error on extraction. My phone is stuck on the pulsing T-Mobile 4G LTE. Please help...my wife is looking at me like I just wasted money on a useless brick :silly:

Make sure you guys ODIN the correct Stock Firmware for your model device.
Make sure you ODIN the correct Custom Recovery for your model device.
And if you're Rooting, for example with CF-AUTO-ROOT by Chain fire, make sure you ODIN the proper version for your device.
In addition, check your USB cable to ensure it's working properly 100% of the time and have enough battery juice to perform the above procedures.

Odin problem
I have double check all the stock firmware. Got the files from 247extreme.com, given to me by DarkMenace. Several downloads of the same files...nothing seems to pass the MD5 check. The USB cable is 100%.
Biker1 said:
Make sure you guys ODIN the correct Stock Firmware for your model device.
Make sure you ODIN the correct Custom Recovery for your model device.
And if you're Rooting, for example with CF-AUTO-ROOT by Chain fire, make sure you ODIN the proper version for your device.
In addition, check your USB cable to ensure it's working properly 100% of the time and have enough battery juice to perform the above procedures.
Click to expand...
Click to collapse

jtcovington said:
I have double check all the stock firmware. Got the files from 247extreme.com, given to me by DarkMenace. Several downloads of the same files...nothing seems to pass the MD5 check. The USB cable is 100%.
Click to expand...
Click to collapse
I used the file from here to Odin back to stock when soft bricked.
http://forum.xda-developers.com/showthread.php?t=2258628
☞Sent from here☜

baseballfanz said:
I used the file from here to Odin back to stock when soft bricked.
http://forum.xda-developers.com/showthread.php?t=2258628
☞Sent from here☜
Click to expand...
Click to collapse
I have tried all of those. Everyone is an MD5 error. I feel like I may be missing something. My recovery screen has a android on his back with a red triangle. I can get to the Tmobile screen, should it stay there longer than 5 minutes?

jtcovington said:
I have tried all of those. Everyone is an MD5 error. I feel like I may be missing something. My recovery screen has a android on his back with a red triangle. I can get to the Tmobile screen, should it stay there longer than 5 minutes?
Click to expand...
Click to collapse
Go into Stock Recovery
Wipe data and Factory Reset option
Boot
And everything will be good
I had the same happen to me regarding the Android on his back with a Red X.
I had to research to find what this mmeant and what to do.
After ODIN, I would freezeion Samsung splash twice.
Pull battery
Install battery
Press Power and Vol up buttons till you see the upper left hand blue script, andtrelease buttons to get into Recovery.
I went into Stock Recovery and chose the option where it says Factory Reset.
I then Booted Successfully.
Afterwards, I ODIN'd Custom Recovery, TWRP 2.5.0.2

Biker1 said:
Go into Stock Recovery
Wipe data and Factory Reset option
Boot
And everything will be good
I had the same happen to me regarding the Android on his back with a Red X.
I had to research to find what this mmeant and what to do.
After ODIN, I would freezeion Samsung splash twice.
I went into Stock Recovery and chose the option where it says Factory Reset.
I then Booted Successfully.
Afterwards, I ODIN'd Custom Recovery, TWRP 2.5.0.2
Click to expand...
Click to collapse
How long should it sit in the Tmobile 4G LTE screen?

jtcovington said:
How long should it sit in the Tmobile 4G LTE screen?
Click to expand...
Click to collapse
Could be several minutes, and a little longer.
Just wait it out after you choose Factory Reset/wipe option and Boot.

Biker1 said:
Could be several minutes, and a little longer.
Just wait it out after you choose Factory Reset/wipe option and Boot.
Click to expand...
Click to collapse
I am now stuck on the samsung logo with the blue writing on the top. What the hell have I done? PLEASE HELP! I probably need instructions like I am 2 years old...at least that is how this process is making me feel. I did read that as long as I can get to download mode it is okay. But I can't seem to get a good file for odin to work with.

jtcovington said:
I am now stuck on the samsung logo with the blue writing on the top. What the hell have I done? PLEASE HELP! I probably need instructions like I am 2 years old...at least that is how this process is making me feel. I did read that as long as I can get to download mode it is okay. But I can't seem to get a good file for odin to work with.
Click to expand...
Click to collapse
Pull battery
Install battery
Press Power and Vol up buttons together
When you see tiny blue script in upper left, immediately release buttons
See if you boot into Recovery.
If you can't boot into recovery and stuck with the tiny blue letters
Then......
Start again.
ODIN Stock Firmware
Make sure only the Auto Reboot and F reset boxes are checked
Click the PDA box and load the tar file
It will take a couple of minutes for the md5 checksum match
Then the file will auto load into the PDA box
Press Start
Will take about 8 minutes to complete
Your will see the upper left ODIN box turn Blue and Pass
Let the device boot
Wait several minutes
If stuck on Samsung Splash
Pull battery
Install battery
Don't power on device
Press Power and Vol up buttons
Enter Recovery
Scroll to Factory Reset/ option with Vol toggle
Press Power once Factory reset is highlighted
Let device Boot
Could take 10 minutes or so
Have Patience
If above successful
ODIN your Custom Recovery
Also Root if needed, but do the ODIN first tossee if it gets done.
Good luck

Biker1 said:
Pull battery
Install battery
Press Power and Vol up buttons together
When you see tiny blue script in upper left, immediately release buttons
See if you boot into Recovery.
If you can't boot into recovery and stuck with the tiny blue letters
Then......
Start again.
ODIN Stock Firmware
Make sure only the Auto Reboot and F reset boxes are checked
Click the PDA box and load the tar file
It will take a couple of minutes for the md5 checksum match
Then the file will auto load into the PDA box
Press Start
Will take about 8 minutes to complete
Your will see the upper left ODIN box turn Blue and Pass
Let the device boot
Wait several minutes
If stuck on Samsung Splash
Pull battery
Install battery
Don't power on device
Press Power and Vol up buttons
Enter Recovery
Scroll to Factory Reset/ option with Vol toggle
Press Power once Factory reset is highlighted
Let device Boot
Could take 10 minutes or so
Have Patience
If above successful
ODIN your Custom Recovery
Also Root if needed, but do the ODIN first tossee if it gets done.
Good luck
Click to expand...
Click to collapse
Okay, I was stuck on the recovery at first followed instructions.
ODIN to PASS...yeah!
Reboots...stuck on Tmobile 4G LTE
Pulled battery...got to recovery
Wipe/factory reset
says complete....reboot now
Stuck on Tmobile 4G LTE screen.
I am following instructions to the letter! I can only think that the file I using for ODIN is wrong.
Wife is getting very suspicious...uh oh!

[Q] And I mannage to soft brick....

Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.

lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, I mannaged to root my device before usb debugging was on all good tablet was perfect etc... And than I did the stupidest thing ever... I installed TWRP Recovery and in order to make a clean back up of my system I selected Wipe out everything.... So the big problem is that after I manually selected every option System etc... can´t remenber but I do know I did wipe out EVERY SINGLE THING, And I did exit even receiving a WARNING you dont have a SYSTEM.... and I did yes quit.... Than to find myself stuck on the samsung logo and being totally blocked since than, I discovered with regret that I actually DIDNT had a Micro SD card and I did wipe out everything including the Restore program if Im getting it right.... I dont know if its already to late and I can go cry on a corner for waisting 500$ in 2 days or is there anything I could do ???, I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use my Zip unofficial downloaded rom and install. And I dont get it why my programm sems so buggy and I can´t select any of those options.
at least I could root my phone easyly.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seryouslly cant thank you enough I googled around and did search a lot on the XDA forums, Im now more scared to go depeer and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Hi have you read this thread. http://forum.xda-developers.com/galaxy-tab-s/help/to-event-soft-brick-disaster-t2838473

maxal said:
Hi have you read this thread.
Click to expand...
Click to collapse
Hey maxal, thx for replying, my English is really not the best, if you think its not understandable I will re edit and try again.

You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Read this too. http://theunlockr.com/2014/08/09/how-to-unroot-the-samsung-galaxy-tab-s-10-5-wifi/
TURNING THE DARNED THING OFF:
Here's the problem. If you are at the Samsung splash screen or boot looping Recovery, you cannot turn your tablet off by just pressing the power button and you can't pull the battery. This prevents you from getting back into Recovery or download mode to restore your nandroid backup or use Odin
So here is what you do:
1) Plug your tablet into your computer (this is important!).
2) Hold down the home, volume down and power buttons until you boot into download mode. Once you are prompted, push the volume up button to enter download mode completely.
3) Now, once in download mode, hold down the power and volume down buttons (not the home button this time) until you screen goes blank (your tablet MUST be plugged into your computer for this to work!). Release the buttons and you will see the battery symbol on your screen. Your tablet is now off - thank god.
4) To enter Recovery mode, hold the home, volume up and power buttons down until Recovery loads.
5) Restore your nandroid backup if you have one.

maxal said:
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Click to expand...
Click to collapse
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?

lleresche said:
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
Click to expand...
Click to collapse
I believe kIes is for stock unrooted devices and Odin is for rooted devices, I may be wrong. I did get my self in a mess and I was stuck on the Samsung logo and with the help of the forum and what I have told you I managed to get my Tab S to turn off, I then boot in to download mode and used Odin to flash stock firmware again

all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again

lleresche said:
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
Click to expand...
Click to collapse
Ok, read my second post I have added a second link for you, follow the unroot instructions.

maxal said:
Ok, read my second post I have added a second link for you, follow the unroot instructions.
Click to expand...
Click to collapse
Got it super cool, wish me luck going for it. I write later if I succeed

Good luck :good:

maxal said:
Good luck :good:
Click to expand...
Click to collapse
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx

lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
I don't know which firmware you should have as I don't know where you are from, but I don't think it should make much difference, the firmware I gave the link for is the UK one.
Maybe someone else can help with a link for the correct firmware for you.

lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s

DUHAsianSKILLZ said:
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
Click to expand...
Click to collapse
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:

lleresche said:
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
Click to expand...
Click to collapse
Well done, and now that you have a copy of your firmware should you have any problems in the future

lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
PS: Sorry, but my this question was asked late. I see that already it isn't actual.

porcelana said:
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
Click to expand...
Click to collapse
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again

lleresche said:
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
Click to expand...
Click to collapse
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards

porcelana said:
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
Click to expand...
Click to collapse
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?

maxal said:
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
Click to expand...
Click to collapse
Hi maxal,
Download via KIES will not check root If you do not connect the tablet to a PC. It only checks the serial number and model type of your Tab for search new updates firmware with determine the correct CSC Region code. You can even download the correct firmware by KIES to your PC without having to connect the tablet and then save the file firmware (this requires some tricks) and flash it via Odin. To do this, you need only enter the serial number and model type of the device in KIES menu Tools -> Firmware Upgrade and Initialisation. More details have here:
http://forum.xda-developers.com/showpost.php?p=58527780&postcount=5
In this case you no need connect the tablet to PC. It also confirms ashyx here:
http://forum.xda-developers.com/showpost.php?p=58535945&postcount=7
Regards

[Q] HELP with S6 Edge Brick/Flash!

Hey guys,
So today, I got a notification saying to update to 5.1 for my T-Mobile Galaxy S6 Edge. There was a error so I plugged it into my computer and used the Smart Switch app they recommended to install the update to my phone. After Smart Switch downloaded the update and installed it onto my phone, my phone is now stuck at the first bootup screen where is just says "Samsung Galaxy S6 Edge, powered by Android"!! I don't know what to do now....I tried downloading the official 5.0.2 ROM for T-Mobile and flashing it using Odin 10.6 but it gives me a NAND Write Start FAIL! every time...I've been reading up on this forum for a couple hours now but my eyes have completely tired out. Was hoping I could get some suggestions/insight on what I might do. I believe there is ONE option which is to type the model # + serial # into the Smart Switch program which factory resets my phone but I was hoping to avoid that since I forgot to back up my photos recently (stupid I know..) Anyways, any help is appreciated.
Thanks!

JERRYHOYO said:
Hey guys,
So today, I got a notification saying to update to 5.1 for my T-Mobile Galaxy S6 Edge. There was a error so I plugged it into my computer and used the Smart Switch app they recommended to install the update to my phone. After Smart Switch downloaded the update and installed it onto my phone, my phone is now stuck at the first bootup screen where is just says "Samsung Galaxy S6 Edge, powered by Android"!! I don't know what to do now....I tried downloading the official 5.0.2 ROM for T-Mobile and flashing it using Odin 10.6 but it gives me a NAND Write Start FAIL! every time...I've been reading up on this forum for a couple hours now but my eyes have completely tired out. Was hoping I could get some suggestions/insight on what I might do. I believe there is ONE option which is to type the model # + serial # into the Smart Switch program which factory resets my phone but I was hoping to avoid that since I forgot to back up my photos recently (stupid I know..) Anyways, any help is appreciated.
Thanks!
Click to expand...
Click to collapse
You need to look into finding the official Odin package (it is likely that only the 5.1.1, or "OF6" version will work now) for your device, and using Odin to restore your phone to the correct firmware version.
One of the places you an get it is from here: http://www.sammobile.com/firmwares/download/48252/G925TUVU2COF6_G925TTMB2COF6_TMB/
But there are alternatives/mirrors around here somewhere that might work better. Good luck.

Aou said:
You need to look into finding the official Odin package (it is likely that only the 5.1.1, or "OF6" version will work now) for your device, and using Odin to restore your phone to the correct firmware version.
But there are alternatives/mirrors around here somewhere that might work better. Good luck.
Click to expand...
Click to collapse
Just downloaded the firmware from that website and was able to flash it using Odin (says PASS!) but it's still stuck at the galaxy s6 Edge screen for the bootup...any insight or suggestions on what I can do?
Thanks

JERRYHOYO said:
Just downloaded the firmware from that website and was able to flash it using Odin (says PASS!) but it's still stuck at the galaxy s6 Edge screen for the bootup...any insight or suggestions on what I can do?
Thanks
Click to expand...
Click to collapse
Ouch, that doesn't sound good. Are you sure your device is the G925T ? To be absolutely certain, you can look on the back of the device, in fine print, it should show the model number (SM-G925T is technically the full model#).
Otherwise, there's some reports around here of this (or similar) problem when they've had their phone carrier-unlocked or otherwise have done anything with their IMEI stuffs in any fashion. I would browse through the forums here to see if there's a good solution. I'm not a good source for "that side of things."
Edit: You might look into this thread or, for another possible fix, this thread.
I can't vouch for the authenticity or safety of flashing anything but official stock firmware, but it sounds like the 2nd link is working for some.

Flash twice in download mode.
After first flash do not let phone reboot.
When phone starts to start up do button combination vol down, power & home button.
Pp.

PanchoPlanet said:
Flash twice in download mode.
After first flash do not let phone reboot.
When phone starts to start up do button combination vol down, power & home button.
Pp.
Click to expand...
Click to collapse
This is good advice. To elaborate, there's two ways to achieve this:
1) Uncheck the "Auto Reboot" option in Odin. It might be greyed out, in which case you can edit your .ini file to achieve the same. Once the stock package is completely finished flashing, you can manually reboot straight into download mode by holding down the buttons until it comes back on into download mode.
2) If you're quick enough, the "easier" way is to wait until the Odin flash is complete, and immediately upon its auto-reboot (goes to black screen on the device), hold down the buttons to force it into download mode.
And then, in either case, flash the package again. It should be taking a few minutes to flash - it's huge. Particularly the SYSTEM partition, which is over 3.5gb.

Aou said:
This is good advice. To elaborate, there's two ways to achieve this:
1) Uncheck the "Auto Reboot" option in Odin. It might be greyed out, in which case you can edit your .ini file to achieve the same. Once the stock package is completely finished flashing, you can manually reboot straight into download mode by holding down the buttons until it comes back on into download mode.
2) If you're quick enough, the "easier" way is to wait until the Odin flash is complete, and immediately upon its auto-reboot (goes to black screen on the device), hold down the buttons to force it into download mode.
And then, in either case, flash the package again. It should be taking a few minutes to flash - it's huge. Particularly the SYSTEM partition, which is over 3.5gb.
Click to expand...
Click to collapse
Just tried to flash it twice with Odin but it's still stuck at the boot screen :\
Hopefully one of the links you posted above will help! Will update back soon.

Aou said:
This is good advice. To elaborate, there's two ways to achieve this:
1) Uncheck the "Auto Reboot" option in Odin. It might be greyed out, in which case you can edit your .ini file to achieve the same. Once the stock package is completely finished flashing, you can manually reboot straight into download mode by holding down the buttons until it comes back on into download mode.
2) If you're quick enough, the "easier" way is to wait until the Odin flash is complete, and immediately upon its auto-reboot (goes to black screen on the device), hold down the buttons to force it into download mode.
And then, in either case, flash the package again. It should be taking a few minutes to flash - it's huge. Particularly the SYSTEM partition, which is over 3.5gb.
Click to expand...
Click to collapse
Well, the second link you posted in a previous post worked!! Thanks!!
Sadly, I wiped the data/factory reset once since it was suggested and I lost all my photos...(sigh) I imagine that there's no way of just getting those back?

Diskdigger, Google for free apk.
Or buy in playstore.
Pp.

Should of installed Google Photos app does automatic backups and has unlimited storage.
Sent from my SM-G925T using Tapatalk

ztmike said:
Should of installed Google Photos app does automatic backups and has unlimited storage.
Sent from my SM-G925T using Tapatalk
Click to expand...
Click to collapse
Google is very invasive with your system, the cloud storage that came pre-installed works great or Dropbox even better.
Pp.

Not sure what your getting at being invasive.. Dropbox doesn't offer unlimited, and didn't even know there was a stock cloud storage app from Samsung pre installed, guessing though that's not unlimited either.
Sent from my SM-G925T using Tapatalk

You get yours unlocked? I know people were having that issue when they got theirs unlocked
Sent from my SM-T337T using XDA Free mobile app

Aou said:
This is good advice. To elaborate, there's two ways to achieve this:
1) Uncheck the "Auto Reboot" option in Odin. It might be greyed out, in which case you can edit your .ini file to achieve the same. Once the stock package is completely finished flashing, you can manually reboot straight into download mode by holding down the buttons until it comes back on into download mode.
2) If you're quick enough, the "easier" way is to wait until the Odin flash is complete, and immediately upon its auto-reboot (goes to black screen on the device), hold down the buttons to force it into download mode.
And then, in either case, flash the package again. It should be taking a few minutes to flash - it's huge. Particularly the SYSTEM partition, which is over 3.5gb.
Click to expand...
Click to collapse
Hey AOU,
I ran into this issue again recently after I tried to factory reset my phone.
It got stuck on the Galaxy S6 Edge screen.
I was going to use the second link like I did before but it seems like the megaupload file isn't available anymore...Do you have any suggestions?
Thanks!