Brodit in car holder for OnePlus One - your help required - ONE Accessories

Brodit make great in car mounts for all sorts of phones. Custom fit to the phone, and custom fit to the car, the two parts are securely screwed together so that you have a perfect fit. They're really fantastic.
At the moment, I'm not sure if Brodit have plans to build one for the OnePlus One but I would really love this. By far the best in car mounts.
If you're interested in this, please contact them to let them know here:
http://www.brodit.com/contact.html?pn=cont&sm=cont
You can email them directly here: [email protected]
They're pretty good at responding quickly, and I'm sure a little encouragemnt couldn't hurt.
Thanks!
James

I hade brodit for all my phones.
That's for sure the One and only holder :good:

ChefChaudart said:
I hade brodit for all my phones.
That's for sure the One and only holder :good:
Click to expand...
Click to collapse
You are without doubt right. Please email them your interest!

I bought this one yesterday.
Hope it will fit.
http://www.amazon.de/Brodit-511307-passiv-universal-Kfz-Halterung-Schwarz/dp/B009LGLDF0
Gesendet von meinem GT-I9300 mit Tapatalk 2

skodaslx said:
I bought this one yesterday.
Hope it will fit.
http://www.amazon.de/Brodit-511307-passiv-universal-Kfz-Halterung-Schwarz/dp/B009LGLDF0
Click to expand...
Click to collapse
I own that holder and the OPO fits fine
Sent from my OnePlus One on Tapatalk

Nice. What about with a case?

URPREY said:
I own that holder and the OPO fits fine
Sent from my OnePlus One on Tapatalk
Click to expand...
Click to collapse
Sure?? I'm finding a good car mount for my oneplus one, brodit was the best for my nexus 4.
Can you post a photo?
thanks

testy83 said:
Sure?? I'm finding a good car mount for my oneplus one, brodit was the best for my nexus 4.
Can you post a photo?
thanks
Click to expand...
Click to collapse
Sure, I'll grab a few pictures when I get some time.

testy83 said:
Sure?? I'm finding a good car mount for my oneplus one, brodit was the best for my nexus 4.
Can you post a photo?
thanks
Click to expand...
Click to collapse
Sorry for the delay. I have both the medium and the large adjustable holders so here's pics of each mounted in my cars.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my OnePlus One on Tapatalk

jamesking420 said:
Brodit make great in car mounts for all sorts of phones. Custom fit to the phone, and custom fit to the car, the two parts are securely screwed together so that you have a perfect fit. They're really fantastic.
At the moment, I'm not sure if Brodit have plans to build one for the OnePlus One but I would really love this. By far the best in car mounts.
If you're interested in this, please contact them to let them know here:
http://www.brodit.com/contact.html?pn=cont&sm=cont
You can email them directly here: [email protected]
They're pretty good at responding quickly, and I'm sure a little encouragemnt couldn't hurt.
Thanks!
James
Click to expand...
Click to collapse
Hi There.
I have a brodit holder and was looking for a similar solution for another device (Nexus 7 2012) a couple of years back.
Ended up getting a flexible Gel case for the Nexus 7 and screwed it onto the Brodit holder. Works perfectly and gives great options for mounting. When well screwed on it is a great solution.
I am adapting a OnePlusOne gel case for this and will post some pictures...
And here it is...

I've bought this http://www.amazon.de/gp/product/B00D901B4W/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 Kenu Airframe, cut off the round holder and screwed it on top of my brodit car adapter and it's perfect.
It looks like the brodit universal adapter is hard plastic and could destroy the sandstone black finish.
sent from my iPhone 7s

FormelLMS said:
.
It looks like the brodit universal adapter is hard plastic and could destroy the sandstone black finish.
Click to expand...
Click to collapse
It's not and hasn't. YMMV

Ok, thanks. Looked like on the pictures.
What means YMMV?

http://www.amazon.es/Soporte-soport...07075356&sr=8-26&keywords=soporte+coche+movil
I bought this

FormelLMS said:
Ok, thanks. Looked like on the pictures.
What means YMMV?
Click to expand...
Click to collapse
Your mileage may vary.

Ah. So these are very similar to ProClip here in the US.
http://www.proclipusa.com/dashboard-mounts/car-dash-mounts.aspx

Proclip are a brodit reseller.

URPREY said:
Sorry for the delay. I have both the medium and the large adjustable holders so here's pics of each mounted in my cars.
Sent from my OnePlus One on Tapatalk
Click to expand...
Click to collapse
CTS-V!!!!!!
Love those.

Kyle C said:
CTS-V!!!!!!
Love those.
Click to expand...
Click to collapse
Thanks. Me too!

I also have the one plus one. And searching for a brodit ProClip holder. There are two 62-77 mm and 75-89 mm. Want to use it with an bumper. The one plus one is 75 mm width + bumper width..... Should ill go for the large one? Does it fit in the large one without any bumper?
Thx
Gesendet von meinem One mit Tapatalk

Related

Car Mount that works with a case?

I purchased one of these car mounts from ebay.
http://cgi.ebay.com/HTC-Droid-Incre...ccessories&hash=item3a686ca880#ht_1208wt_1352
Along with a cheap hard plastic case:
http://cgi.ebay.com/CARBON-FIBER-Ha...ccessories&hash=item1e65042f17#ht_2488wt_1352
Sadly the car mount wont work with this case as it makes the phone too big to fit. Do you guys have any recommendations on either a case that is slim enough to work with the car mount or another car mount that would work well with a case?
I have another generic car mount in my car that I have been using for years with Ipods and other cell phones, but sadly it covers the side charging port on the Inc2, leaving me to look for another solution.
This is the one I use:
http://www.amazon.com/Arkon-Univers..._1_3?s=wireless&ie=UTF8&qid=1305654075&sr=1-3
Works wonderfully with my Otterbox Defender... Should have picked up another one when I bought mine though.. Was around $12 when I bought it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Incredible 2 using XDA App
Don't know if you found what your looking for, but found this company while looking for a bike mount.
WWW.slipgripcarmounts.com/HTC_c_21365.html
the arkon universal seems a bit bulky but it always seems the most..well..univeral. haha.
for the price, i'll give it a try since i dont like taking my case off and on!
ps: price on amazon went up to 18.99. get it from newegg for 14.99 and free s/h
Bought every mount possible. By soundgate m2 and use with tetrax xway
Sent from my Incredible 2 using Tapatalk
THIS is the best freaking mount EVER!!!
Under $20. Sold exclusively for Iphone/Itouch, but works perfectly with the DInc2 and case. Snug, super smooth to use, and not bulky at all!!!! Got mine from Amazon. They are readily available.
Kensington K39256US Quick-Release Car Mount for iPhone and iPod touch--Compatible with iPhone 4 (Black)
I will post a pick of my DInc2 w/Case in it tonight. Absolutely LOVE this thing.
post a link tto Kensington mount Ill give it a try
Sent from my Incredible 2 using Tapatalk
SR3TLAW said:
post a link tto Kensington mount Ill give it a try
Sent from my Incredible 2 using Tapatalk
Click to expand...
Click to collapse
http://amzn.com/B0031U1AT6
Watch the video. It works just as the video shows...
bought two arkon universal mounts, one for me and the other for my wife's van, $14 each from amazon, they are great for the price. my phone with ottobox defender fit just fine, this mount can fit much bigger phone too because of the extendability of the side latches.
kmanuel74 said:
Don't know if you found what your looking for, but found this company while looking for a bike mount.
WWW.slipgripcarmounts.com/HTC_c_21365.html
Click to expand...
Click to collapse
+1 for Slipgrip mount with Seidio Active. Custom fit. I modified it to connect to a ProClip dashmount.
kmanuel74 said:
Don't know if you found what your looking for, but found this company while looking for a bike mount.
WWW.slipgripcarmounts.com/HTC_c_21365.html
Click to expand...
Click to collapse
Another vote for slipgrip.
http://www.slipgripcarmounts.com/Droid-Incredible-2_c_21501.html
They make a huge variety on mounts that work with the Otterbox and the Seidio cases. The Otterbox Defender ones I can personally tell you fit like a glove.
buddhafool said:
Another vote for slipgrip.
http://www.slipgripcarmounts.com/Droid-Incredible-2_c_21501.html
They make a huge variety on mounts that work with the Otterbox and the Seidio cases. The Otterbox Defender ones I can personally tell you fit like a glove.
Click to expand...
Click to collapse
I would be remiss if it did not share the other half of my car mount dream team. These guys make clips that are molded to fit into the plastic pieces of your dash. It is customized to your car model. It is amazing.
http://www.proclipusa.com/vehiclemounts/vehiclemounts.aspx
-Paul
Sent by my counterpart r2d2

Searching for car doc for Galaxy Note with Gel Case

Hi,
as you can read in the title, I'm searching a car cradle form my Galaxy Note with / in a Gel Case, which looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My idea is to install a Brodit car holder, so I only need some "universal" mobile-holder.
I've already seen some, for exemple this one from Brodit,
but I don't know, if my Note will fit with the gel case installed.
Does anybody of you got an idea?
Thanky guys (and grils)!
I'm using a universal phone mount from eBay, look for 'Phone CD Mount'. It mounted to the CD opening slot.
chrcad said:
Hi,
as you can read in the title, I'm searching a car cradle form my Galaxy Note with / in a Gel Case, which looks like this:
My idea is to install a Brodit car holder, so I only need some "universal" mobile-holder.
I've already seen some, for exemple this one from Brodit,
but I don't know, if my Note will fit with the gel case installed.
Does anybody of you got an idea?
Thanky guys (and grils)!
Click to expand...
Click to collapse
yes, i am now using case from Nillkin and it fits
AC07 said:
yes, i am now using case from Nillkin and it fits
Click to expand...
Click to collapse
Can you please tell me the exact name of the doc? Or a product number?
Thanks
chrcad said:
Can you please tell me the exact name of the doc? Or a product number?
Thanks
Click to expand...
Click to collapse
http://www.proclipusa.com/brodit-de...ble-holder-with-tilt-swivel-848636-13765.aspx this one
I've bought Herbert Richter car holder:
http://www.amazon.de/Herbert-Richte...=sr_1_2?s=ce-de&ie=UTF8&qid=1323077084&sr=1-2
So far I have no case on the SGN but I'm sure it will fit with any case that is not thicker than 5 mm on sides.
It's made in Germany and you can immediately feel the quality. It's sturdy and seems to be pretty solid, with option to rotate thanks to ball-head.
Capdase Cigarette USB Car Charger for Galaxy Note
I did a lot of research as well for the one that can hold the Note in a case.
Liked the Brodit one for the custom made feel, but it doesn't work for me if I need to take the case on and off everytime in order to put the phone in the holster.
Then I found this Capdase one that is perfect for this Note as it has USB jacks to charge as well.
Just ordered this one. Couldn't wait to get it. Will review soon upon receipt.
http://www.ebay.com/itm/New-Capdase...&otn=5&po=LVI&ps=63&clkid=4700153185929307767
May I suggest the exomount?
http://www.exogear.com/products-exomount-car-mount-holder.html
It's by far the best car mount I used so far.
mfractal said:
May I suggest the exomount?
http://www.exogear.com/products-exomount-car-mount-holder.html
It's by far the best car mount I used so far.
Click to expand...
Click to collapse
that looks awesome, but will it hold the 5.3" PLUS a gel case?
The page says up to a 5" screen
Yeah, it will. It holds a bare note with quite a lot of extra room.
I can take a pic for you if you're interested..
I'll believe you
Thanks
Sent from my GT-N7000 using Tapatalk
I just ordered the official Samsung car dock from Expansys today and even though it says the product ships in two days, I just got an email saying my order had already shipped.
So I should have it either tomorrow or Friday.
I'll let you know how it works.
dr.W said:
I just ordered the official Samsung car dock from Expansys today and even though it says the product ships in two days, I just got an email saying my order had already shipped.
So I should have it either tomorrow or Friday.
I'll let you know how it works.
Click to expand...
Click to collapse
Works well dude. Got it from the Samsung shop at Vodaworld. Got the desktop dock too.
EDIT: The gel case (or any case for that matter) has to come off to use the car dock. I just ordered the Exogear one mentioned above because of this.
dr.W said:
I just ordered the official Samsung car dock from Expansys today and even though it says the product ships in two days, I just got an email saying my order had already shipped.
So I should have it either tomorrow or Friday.
I'll let you know how it works.
Click to expand...
Click to collapse
Thanks for your work, but you're in the wrong thread. Here we're talking about car docs for Note in a case!
I use the Spider Podium, it can be configured to fit any mobile. An additional plus is that it can easily be used as a phone holder in the home too!
I got mine from Mobilefun.co.uk - link
http://www.mobilefun.co.uk/spider-podium-universal-desk-stand-black-p25528.htm
mfractal said:
May I suggest the exomount?
http://www.exogear.com/products-exomount-car-mount-holder.html
It's by far the best car mount I used so far.
Click to expand...
Click to collapse
Looks to be exactly what I need. Ordered 2 for my wife and myself. Thanks for the post dude.
Sent from my Galaxy Note using Tapatalk
I had a brodit adjustable iPhone 3gs holder, that can be adjusted width wise. Works great for my note and can go wider still so should be good for a case too.
hi mfractal
Can you upload some photos please
I have note with case and still have problem to find solution
thx Dariusz
dzygit said:
hi mfractal
Can you upload some photos please
I have note with case and still have problem to find solution
thx Dariusz
Click to expand...
Click to collapse
+1
are we sure that this exomount works with silicon case?
Original poster,
I have the same gel case as you have shown in the pictures. In my vehicle I use the Bracketron PHV-202-BL Grip-iT GPS and Mobile Device Holder. I have two of them. One is mounted to the air duct. The other is mounted on a McAllay adjustable cup holder arm (because I already had that and the Bracketron fits on it). If you want a cup-holder mounted solution then you could probably use the Bracketron UCH-101-BL Universal Cup-iT II Mount with Grip-iT for GPS. Of course, you have to take into consideration your car's cupholder configuration.
I use two docks because for GPS I use the one mounted (up) on the air duct and for all other uses I place the Galaxy Note in the cupholder mount for easy access as my arm sits on the center armrest.

Can Anyone Suggest a Good Stand for Galaxy Note?

Hi guys,
As stated in the thread title, I want to use my Note for movie-watching purposes or for tablet-like orientation, so I'll be needing a stand that can hold the note either vertically or horizontally.
I don't feel using those cases with a built-in kickstand since I prefer just thin cases which can easily be put inside the pocket.
So there, any suggestions of a good stand for Galaxy Note?
Bought this stand for my note few weeks back .. quite solid build and can be used for viewing vertically and horizontally
Belkin stand made for tablet but fit just nice for note .. made of aluminium and rubber to prevent scratch on certain areas in contact with note and most importantly adjustable angles ..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
lawgone said:
Hi guys,
As stated in the thread title, I want to use my Note for movie-watching purposes or for tablet-like orientation, so I'll be needing a stand that can hold the note either vertically or horizontally.
I don't feel using those cases with a built-in kickstand since I prefer just thin cases which can easily be put inside the pocket.
So there, any suggestions of a good stand for Galaxy Note?
Click to expand...
Click to collapse
stjoemail said:
Bought this stand for my note few weeks back .. quite solid build and can be used for viewing vertically and horizontally
Belkin stand made for tablet but fit just nice for note .. made of aluminum and rubber to prevent scratch on certain areas in contact with note and most importantly adjustable angles ..
Click to expand...
Click to collapse
Wow that is just perfect for me. Mind telling the exact name of that stand? I hope Amazon sells them.
Thanks in advance buddy.
Its called the Belkin Flipblade Adjust - I've got one and highly recommend it
http://www.amazon.com/Belkin-FlipBl...RE2O/ref=sr_1_1?ie=UTF8&qid=1338216340&sr=8-1
http://www.amazon.co.uk/Belkin-Adju...NZX0/ref=sr_1_1?ie=UTF8&qid=1338216518&sr=8-1
I'm happy with this one from Ebay
I have the ikross stand which works great and doesn't take up much space when not used. Easy to take with you.
Sent from my GT-N7000 using xda premium
MISSDIVA said:
Its called the Belkin Flipblade Adjust - I've got one and highly recommend it
http://www.amazon.com/Belkin-FlipBl...RE2O/ref=sr_1_1?ie=UTF8&qid=1338216340&sr=8-1
http://www.amazon.co.uk/Belkin-Adju...NZX0/ref=sr_1_1?ie=UTF8&qid=1338216518&sr=8-1
Click to expand...
Click to collapse
Thanks for the links mate.
JHimmelbauer said:
I'm happy with this one from Ebay
Click to expand...
Click to collapse
Taskman said:
I have the ikross stand which works great and doesn't take up much space when not used. Easy to take with you.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Does the iKross stand hold the Note with a casing/housing properly?
What can you say about this?
Just purchased one of these. Looks great value for money. :-
http://www.ebay.co.uk/itm/BLACK-HAR..._MobilePhonesCasesPouches&hash=item46039b1939
got this one @ gamestop. Folds up for easy transport also fits my tablet nicely.
http://www.mobilefun.co.uk/samsung-galaxy-note-dual-desktop-charging-cradle-p34093.htm
lsbe said:
got this one @ gamestop. Folds up for easy transport also fits my tablet nicely.
Click to expand...
Click to collapse
That looks nice as a very portable alternative. I will go by my local Gamestop.
Any part numbers or name so i can look for it?
I have a doc which is nice but it does not fit with the case on so thats lame lol
I got this -
Exogear Exomount Car Windshield Mount Holder
http://www.ebay.com/itm/Exogear-Exo...300322?pt=PDA_Accessories&hash=item231baede22
see video
shaolin95 said:
That looks nice as a very portable alternative. I will go by my local Gamestop.
Any part numbers or name so i can look for it?
I have a doc which is nice but it does not fit with the case on so thats lame lol
Click to expand...
Click to collapse
http://www.gamestop.com/accessories/folding-tablet-stand/99881
I'm using this. Works for Charging the Phone, as well as a Speaker (built in):
http://www.ebay.co.uk/itm/GENUINE-S...UK_Mobiles_Accessories_RL&hash=item19d14476de
+1
also i use this for more portable travels
i also use this found on ebay
"Portable Mini Tripod Phone Stand Holder for Cell Mobile Smartphone"
sorry unable to post link
stjoemail said:
Bought this stand for my note few weeks back .. quite solid build and can be used for viewing vertically and horizontally
Belkin stand made for tablet but fit just nice for note .. made of aluminium and rubber to prevent scratch on certain areas in contact with note and most importantly adjustable angles ..
Click to expand...
Click to collapse
I got this on for 5 bucks on clearance at target -

HTC One Desktop Dock [Link]

How about a really nice looking desktop docking station for the HTC One?
The dock itself is a pre-order item, but it'll ship just on april 15th. Just in time!
http://www.gadgets4geeks.com.au/product/htc_one_m7_cover_mate_desktop_cradle
UPDATED: EBAY LINK (Way cheaper shipping)
http://pages.ebay.com/link/?nav=item.view&id=200912701262
Compatible Ultra Thin Rock Case! http://pages.ebay.com/link/?nav=item.view&id=151012519977
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I've helped you out, please click the "Thank You" button! :good:
Acetherockr said:
How about a really nice looking desktop docking station for the HTC One?
The dock itself is a pre-order item, but it'll ship just on april 15th. Just in time!
http://www.gadgets4geeks.com.au/product/htc_one_m7_cover_mate_desktop_cradle
If I've helped you out, please click the "Thank You" button! :good:
Click to expand...
Click to collapse
There are a bunch available on ebay too:
This one looks the same as the one you posted: http://www.ebay.com/itm/200912701262?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Lower profile (might be tippy?) but cheap and available in black/silver: http://www.ebay.com/itm/26119606923...eName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Other low profile ones, black: http://www.ebay.com/itm/181116629439?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
silver: http://www.ebay.com/itm/181116630617?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Still need something with audio/HDMI out from it though.
Looks awesome. I just bought this horizontal desktop stand for my HTC One XL.
http://www.ebay.ca/itm/221032240252?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I've pre-ordered the HTC One and my wife will be getting my One XL which is only about 8 months old now. Her Blackberry has kicked the bucket and she's sick of them now. Eventually all BB fanatics see the light, just takes some longer than others. LOL!
So looking forward to this phone though! Thanks for sharing the desktop stand. I'll be sure to order one to replace the one I have at work now.
OP hasn't mentioned it, but the dock he linked to is compatible with some cases too, so those of you who like to keep your phones cased up may not have to remove them when docking. I can imagine that's quite a bonus.
r2001uk said:
OP hasn't mentioned it, but the dock he linked to is compatible with some cases too, so those of you who like to keep your phones cased up may not have to remove them when docking. I can imagine that's quite a bonus.
Click to expand...
Click to collapse
It really is a huge plus, providing you like using hard shell/TPU cases. :good: I doubt anything much thicker then that would work.
Oooh, that dock looks nice, but the $36 shipping charge (to USA) is 150% of the price of the gadget itself :crying:
Will check out the e-bay ones though ... thanks!
think i might invest in one of these:good:
eBay links!!
Dartman-x said:
Oooh, that dock looks nice, but the $36 shipping charge (to USA) is 150% of the price of the gadget itself :crying:
Will check out the e-bay ones though ... thanks!
Click to expand...
Click to collapse
I actually just found and ordered the exact same dock from eBay!
Dock >> http://pages.ebay.com/link/?nav=item.view&id=200912701262
Nice Snap-on case I ordered that should work with the dock >> http://pages.ebay.com/link/?nav=item.view&id=151012519977
Thanks ordered one
That dock was shown in an earlier thread but there wasn't anyplace to buy it from. It just showed up on Amazon but it's not setup with a price yet. I bookmarked it so I can check every now and then. My phone is still two weeks away...
http://www.amazon.com/KiDiGi-Cover-..._58?s=wireless&ie=UTF8&qid=1365412054&sr=1-58
Fantastic! Ordered one. Thanks!
Here's a cradle exactly like the Kidigi Cover-Mate one but cheaper (I imagine) and for sale already!
http://www.ebay.co.uk/itm/Genuine-T...ories_MobilePhoneChargers&hash=item53f77380dc
Sent from my GT-I9100 using xda premium
Anybody some experiences with these docks from Ebay already? The micro USB connection on the docks is in the middle where the connection on the One is a bit more to the right. Question: will it fit? (not blend :silly
Desk holder ,looks nice
http://www.ebay.co.uk/itm/151026090132
Darclite said:
Here's a cradle exactly like the Kidigi Cover-Mate one but cheaper (I imagine) and for sale already!
http://www.ebay.co.uk/itm/Genuine-T...ories_MobilePhoneChargers&hash=item53f77380dc
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I ordered this. Hopefully it is worth the money
Sent from my LG-LS970 using xda app-developers app
seems good, just waiting for the HTC one.:victory:
Darclite said:
Here's a cradle exactly like the Kidigi Cover-Mate one but cheaper (I imagine) and for sale already!
http://www.ebay.co.uk/itm/Genuine-T...ories_MobilePhoneChargers&hash=item53f77380dc
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Is it only for charging or it is connected to pc aswell?
Mines just arrived and I can confim that it will work with a pc via the included usb cable or to charge the unit using your phones adapter. It just won't do both simultaneously as it only has one socket.
Sent from my GT-I9100 using xda premium
These are extremely similar to a dock I have for my S3. Very basic, but good.
Sent from my SGH-I747 using Tapatalk 2
Dharkan said:
Is it only for charging or it is connected to pc aswell?
Click to expand...
Click to collapse
Does it fit with a case on? Thanks.
Sent from my HTC One using xda premium

Griffin Car Pod/Dock

Where the heck can I get one? Been out of stock/coming soon for weeks on Motorola site and Griffin site. Think it might have actually been taken off Moto site now.
I really want one, where can I turn?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
They stopped making them, and from what most people say, they were hardware-defective, and not very well made. Your best bet is hoping for Motorola to make their own (which is unfortunately quite doubtful).
Otherwise, try to find a non-****ty universal dock (and do some NFC magic with it), or wait to see if a company like iBolt makes one which supports the phone.
What mounts are people here using? Any recommendations?
Sent from my XT1060 using Tapatalk
I've been using the RAM Mount Universal X Grip - http://www.rammount.com/Products/XGriptradeMounts/tabid/4687/Default.aspx. I found mine on Amazon for $10 less than the official site. It's quite good, and I can obviously use it with my next phone just fine. I really just needed something to hold the phone to my windshield if I want to use navigation, not too worried about built in charging, etc.
I second the RAM mount. Got mine early this week and its the best built mount I have ever used. Ordered mine from Amazon as well.
Sent from my XT1060 using Tapatalk
Back in stock
dems86 said:
Where the heck can I get one? Been out of stock/coming soon for weeks on Motorola site and Griffin site. Think it might have actually been taken off Moto site now.
I really want one, where can I turn?
Click to expand...
Click to collapse
Back in stock today, but is it different? The site does not say it can charge while docked, but the Griffin page does.
http://www.motorola.com/us/accessor...y-Griffin/griffin-navigation-dock-moto-x.html
http://store.griffintechnology.com/moto-x/vehicle-dock-for-moto-x
moosetender8 said:
Back in stock today, but is it different? The site does not say it can charge while docked, but the Griffin page does.
http://www.motorola.com/us/accessor...y-Griffin/griffin-navigation-dock-moto-x.html
http://store.griffintechnology.com/moto-x/vehicle-dock-for-moto-x
Click to expand...
Click to collapse
I ordered two, but yeah it seemed a bit, different from the one they had in stock awhile back?
Sent from my XT1060 using xda app-developers app
Damn missed it again!
Sent from my XT1060 using Tapatalk
This universal mount doesn't charge or turn the device to car mode automatically but while I wait for hopefully ibolt to make one or the griffin one to come in stock I use this one and to be honest it works really really well.
iMagnet
Its obviously made for the iphone but I have used it with my Moto X, S4, and Note 2 and never had a problem. It comes with 3 metal plates to put either in between your case and phone or you can use the adhesive tape and stick it to a case or the phone (I wouldn't do that though). I use the round metal plate and I stick it between the back of the phone and my case and it just sticks up there and it doesn't move around at all.
If you could find a way to stick a piece of thin metal above the camera and another right below the camera and stick it on the imagnet mount it will activate the car mode. The Moto X (like most of the other Motorola phones in the past) use magnets to activate the car mode.
Ive got the dock new in box im gonna sell since i no longer have the X....if anyones interested let me know i also have 2 power docks new in box
Has anyone used the car dock with the otterbox commuter case?
Sent from my XT1060 using Tapatalk
I sold my dock...
FYI...
They're back in stock :victory:
chuckdz3 said:
FYI...
They're back in stock :victory:
Click to expand...
Click to collapse
Just ordered mine. Thx for the heads up.
chuckdz3 said:
FYI...
They're back in stock :victory:
Click to expand...
Click to collapse
Mine arrives tomorrow.
---------- Post added at 02:32 PM ---------- Previous post was at 02:32 PM ----------
mbar9607 said:
Ive got the dock new in box im gonna sell since i no longer have the X....if anyones interested let me know i also have 2 power docks new in box
Click to expand...
Click to collapse
How much are the power docks?

Categories

Resources