Develop Bugs

Prevention Information ERROR

Hi i have the following error :
When i try to click on WI-FI button comes up the following
prevention information
the device has detected an application attempting unppermitted actions and has stopped loading.To protect your device it is recomended you reboot.
I have rooted my phone using the topic here
http://forum.xda-developers.com/showthread.php?t=2258633
i had to load the
http://k0nane.info/rom/SGH-M919-UVUAMDB-k0nane.7z
file first cos i was getting an failure when installing the superuser using odin 3.0.7
my recovery is TWRP 2.5.0.0 and i am on wicked v1
Anyone else have this issue?

I had the same issue if you check the build number and the baseband version they are not the same. If you re-odin the MDL build http://k0nane.info/rom/M919UVUAMDL_M919TMBAMDL_TMB.zip again then WIFI should work again. I got it rooted after that by doing the following:
1. Load the OUDHS CWM-Based Recovery 1.0.3.3 for T-Mo GS4, via odin uncheck auto reboot and goto to recovery http://k0nane.info/rom/OUDHS-Recovery-jfltetmo-1.0.3.3.tar
2. Install Chainfire's SuperSU http://www.shabbypenguin.com/Android/Scripts/Nexus-Files/Root/SuperSU-v1.25+.zip then
3 Install [KERNEL] Stock Touchwiz MDB - SetUID Restriction Removed http://d-h.st/GcM
Between installs make sure you wipe the cache and davik cache
then you reboot you should be rooted with the newest update MDL minus the kernel lock

yes its not same the build and the baseband
Is it possible to be done using the twrp?
other recovery was little difficult?
can u send me the links i need please i just don't want to mess around and brick my phone
Thanks a lot

kaniebas said:
yes its not same the build and the baseband
Is it possible to be done using the twrp?
other recovery was little difficult?
can u send me the links i need please i just don't want to mess around and brick my phone
Thanks a lot
Click to expand...
Click to collapse
Check my post again, I couldn't get TWRP to work at first but it maybe i did not uncheck the the auto reboot box when I did that. Once the the recovery is loaded via odin you need to pull the battery then do the home-up volume-power to get into the recovery. I notice TWRP was a bit too sensitive and could not scroll down the list of folders to get to the zip files

dhonzik said:
Check my post again, I couldn't get TWRP to work at first but it maybe i did not uncheck the the auto reboot box when I did that. Once the the recovery is loaded via odin you need to pull the battery then do the home-up volume-power to get into the recovery. I notice TWRP was a bit too sensitive and could not scroll down the list of folders to get to the zip files
Click to expand...
Click to collapse
i manage to install CWM using odin and when i rooted it i install goo manager ant now i am on TWRP

I've tried installing all three recoveries using Odin, but for some reason none are working and now when I try and boot into recovery it just restarts the phone. Anyone know what I should do?

oasad92 said:
I've tried installing all three recoveries using Odin, but for some reason none are working and now when I try and boot into recovery it just restarts the phone. Anyone know what I should do?
Click to expand...
Click to collapse
You need to uncheck the auto reboot box in odin, after the recovery transfer is complete pull the battery and unplug from your computer then do a boot into recover by holding the volume up-home-power button. If not rooted follow the instructions in my post above at the very least you need to load the kernel file

dhonzik said:
You need to uncheck the auto reboot box in odin, after the recovery transfer is complete pull the battery and unplug from your computer then do a boot into recover by holding the volume up-home-power button. If not rooted follow the instructions in my post above at the very least you need to load the kernel file
Click to expand...
Click to collapse
So I did that with all 3 recoveries like 2 or 3 times each, nothing was working I unchecked reboot then would just pull battery after reboot and hold vol up and power to try and get into recovery. Sometimes the litlte blue would appear in the top left corner saying "recovery booting" and would just stay there forever other times that would appear and then the phone would just reboot itself.
Anyway finally found instructions that allowed said to try checking auto reboot and f time reset so did that with a TWRP recovery tar and then it finished and rebooted. I then shut the phone off and held power and vol up to get into recovery and it loaded fine. I was then able to flash the chainfire superuser and kernel you posted. So Thanks a bunch man!

Unbricking phone?

So I was installing modaco switch on my phone and it worked for a bit but then when I rebooted it it wouldn't turn on. I've tried flashing it in odin and nothing happened and it still doesn't work. I was wondering if anyone else had any ideas.

Can you access Odin? If so, I recommend flashing back to stock first.

joshua.justice said:
So I was installing modaco switch on my phone and it worked for a bit but then when I rebooted it it wouldn't turn on. I've tried flashing it in odin and nothing happened and it still doesn't work. I was wondering if anyone else had any ideas.
Click to expand...
Click to collapse
Are you able to get your device into ODIN/Download mode?
If so, flash the Samsung Stock Firmware as macboy3000 suggested.
To get your device into ODIN mode:
Power down device
Press Power and Vol down buttons and hold
Device should show an image
Press Vol up and you'll be in ODIN mode
Some helpful tips:
Follow the instructions via the red link in my sig.
Be sure to have enough juice in your battery
Have a good usb cord. This is the reason many ODIN flashes fail.
Check your md5 checksum match between the download file and your download prior to flashing the stock Firmware.

macboy3000 said:
Can you access Odin? If so, I recommend flashing back to stock first.
Click to expand...
Click to collapse
Biker1 said:
Are you able to get your device into ODIN/Download mode?
If so, flash the Samsung Stock Firmware as macboy3000 suggested.
To get your device into ODIN mode:
Power down device
Press Power and Vol down buttons and hold
Device should show an image
Press Vol up and you'll be in ODIN mode
Some helpful tips:
Follow the instructions via the red link in my sig.
Be sure to have enough juice in your battery
Have a good usb cord. This is the reason many ODIN flashes fail.
Check your md5 checksum match between the download file and your download prior to flashing the stock Firmware.
Click to expand...
Click to collapse
I tried flashing it twice and it still said successful when it finished flashing but continued to boot loop.
I'm not sure what would cause think

joshua.justice said:
I tried flashing it twice and it still said successful when it finished flashing but continued to boot loop.
I'm not sure what would cause think
Click to expand...
Click to collapse
After you flashed ODIN, did you go into stock recovery and Factory reset, then reboot, both from within Recovery?

Biker1 said:
After you flashed ODIN, did you go into stock recovery and Factory reset, then reboot, both from within Recovery?
Click to expand...
Click to collapse
No, I don't think it'll boot the stock recovery but I'll try that

If you flash stock and still receive boot loops, try going into recovery and wiping data and cache.

take out your sdcard too just for the hell of it.

I just reread your post, and your device is working fine, it's just that you want to know how to get Modaco Switch to work on your device with stability, because it stops working shortly after it's installed.
I had thought your device stopped working. I don't think ODIN will be your answer, and I don't about Modaco.
Maybe:
See if others have Modaco Switch working with stability, and if so:
try wiping cache & dalvik cache in Recovery, or try wiping first.

Biker1 said:
I just reread your post, and your device is working fine, it's just that you want to know how to get Modaco Switch to work on your device with stability, because it stops working shortly after it's installed.
I had thought your device stopped working. I don't think ODIN will be your answer, and I don't about Modaco.
Maybe:
See if others have Modaco Switch working with stability, and if so:
try wiping cache & dalvik cache in Recovery, or try wiping first.
Click to expand...
Click to collapse
It's not working fine. It doesn't boot at all. I tried going into recovery and it still boot loops even after flashing with odin.

joshua.justice said:
It's not working fine. It doesn't boot at all. I tried going into recovery and it still boot loops even after flashing with odin.
Click to expand...
Click to collapse
Ah, so I did read it right the first time. I saw the title the 1st time but I didn't see it the 2nd time, which is why I thought just Modaco wasn't turning on when I read your post without reading the title the 2nd time.
Plus I missed all the follow up posts. That's what I get for running around on my phone trying to read threads
With that being said, then what I wrote should resolve your issues.
Follow my RED link in my sig, and that should help to resolve your issues. I wrote out the steps previously, but looking at the link may help you

Biker1 said:
Ah, so I did read it right the first time. I saw the title the 1st time but I didn't see it the 2nd time, which is why I thought just Modaco wasn't turning on when I read your post without reading the title the 2nd time.
Plus I missed all the follow up posts. That's what I get for running around on my phone trying to read threads
With that being said, then what I wrote should resolve your issues.
Follow my RED link in my sig, and that should help to resolve your issues. I wrote out the steps previously, but looking at the link may help you
Click to expand...
Click to collapse
It doesn't boot into recovery so how can I wipe those?

joshua.justice said:
It doesn't boot into recovery so how can I wipe those?
Click to expand...
Click to collapse
You mentioned in the op you tried flashing in ODIN.
What exactly is your phone able to do?
Do you see anything on the display?
Does it boot into anything?
Etc...
What does 'tried going into recovery but it still boot loops' mean?
If you go step by step what you did before the issue and after, including Exactly what status your device is in, it will help in attempting to troubleshoot and resolve your issues.

I can get it into download mode but flashing Odin does nothing. When I hit the power button to turn it on it goes all the way until the t mobile logo and stalls. Sometimes it just vibrations off and on with a dark screen. When I try to go into recovery with the volume up and power keys or says 'rebooting recovery' in blue like it always does but then it just goes to booting normally and then hangs there.

joshua.justice said:
I can get it into download mode but flashing Odin does nothing. When I hit the power button to turn it on it goes all the way until the t mobile logo and stalls. Sometimes it just vibrations off and on with a dark screen. When I try to go into recovery with the volume up and power keys or says 'rebooting recovery' in blue like it always does but then it just goes to booting normally and then hangs there.
Click to expand...
Click to collapse
Can you confirm what version of the S4 you have?
The SGH-M919?
Not trying to be stupid or anything, just making sure.
Have you tried this..
1. Flash a recovery image using Heimdall (I'd suggest ClockworkMod)
2. Reboot to recovery. (Hopefully it goes through this time)
3. adb sideload a ROM to your device.
4. Flash the ROM.
5. Win?
Just trying to think of ways you can get your device back up and running.

joshua.justice said:
I can get it into download mode but flashing Odin does nothing. When I hit the power button to turn it on it goes all the way until the t mobile logo and stalls. Sometimes it just vibrations off and on with a dark screen. When I try to go into recovery with the volume up and power keys or says 'rebooting recovery' in blue like it always does but then it just goes to booting normally and then hangs there.
Click to expand...
Click to collapse
You have to:
Power down device
Don't power up
Press Power and Vol down buttons simultaneously
Press Vol up button
You should be in ODIN mode

Biker1 said:
You have to:
Power down device
Don't power up
Press Power and Vol down buttons simultaneously
Press Vol up button
You should be in ODIN mode
Click to expand...
Click to collapse
I did that. It's caked download mode. That's where I flashed Odin off my computer.

I noticed after flashing stock with Odin, I get bootloops, unless I do a factory reset. After stock flashes, it reboots into recovery and wipes cache by itself. When it finishes that and it starts to reboot by itself, I press the volume up button and go into recovery. I do a factory reset and reboot and all is fine, no bootloops.

norml said:
I noticed after flashing stock with Odin, I get bootloops, unless I do a factory reset. After stock flashes, it reboots into recovery and wipes cache by itself. When it finishes that and it starts to reboot by itself, I press the volume up button and go into recovery. I do a factory reset and reboot and all is fine, no bootloops.
Click to expand...
Click to collapse
Mine doesn't do that though. It just boot loops without going into recovery.

joshua.justice said:
Mine doesn't do that though. It just boot loops without going into recovery.
Click to expand...
Click to collapse
I understand that, my post is describing what happens when you flash a stock tar, not bootlooping, I am describing exactly what happens during the process of flashing a stock tar and how to avoid bootlooping, step by step. I guess you weren't paying attention when you flashed a stock tar with Odin, it reboots for the first time by itself and goes into stock recovery and wipes cache by itself, it's a normal process, maybe that part confused you. Any hows, good luck, I have explained step by step what I do to avoid bootloops and my directions are clear and simple. Bye.

stuck on samsuing screen after boot

I installed teh wrong TWRP so i tried to install a different version via odin - but now my phone just goes to teh samsung screen and doesnt boot -
I tried to go throigh this guide http://forum.xda-developers.com/showthread.php?t=2024207 but
but it didnt work I am on the n17100 which is probably why
atm just wanna get back to my stock rom -
can i install a different twrp over this one via odin ? or should I not have done that
essentially I need to install the n7100 twrp then ill be okay - but not sure how from this loop pls help

benben333 said:
I installed teh wrong TWRP so i tried to install a different version via odin - but now my phone just goes to teh samsung screen and doesnt boot -
I tried to go throigh this guide http://forum.xda-developers.com/showthread.php?t=2024207 but
but it didnt work I am on the n17100 which is probably why
atm just wanna get back to my stock rom -
can i install a different twrp over this one via odin ? or should I not have done that
essentially I need to install the n7100 twrp then ill be okay - but not sure how from this loop pls help
Click to expand...
Click to collapse
Install and try Philz Touch recovery.
Installation link: http://forum.xda-developers.com/showthread.php?t=2201860
Instrucions link: http://forum.xda-developers.com/showthread.php?t=2028103

similar issue
Hi, I don't know if I should make a separate post but I have a similar problem.
My Note 2 is stuck on the "Samsung GALAXY Note II GT-N7100" screen at boot. Only by flashing a stock ROM through ODIN can this be fixed. When I try to install a custom recovery and ROM on it, it gets stuck again at that screen.
Can anyone help me?

chinoboy said:
Hi, I don't know if I should make a separate post but I have a similar problem.
My Note 2 is stuck on the "Samsung GALAXY Note II GT-N7100" screen at boot. Only by flashing a stock ROM through ODIN can this be fixed. When I try to install a custom recovery and ROM on it, it gets stuck again at that screen.
Can anyone help me?
Click to expand...
Click to collapse
Hold down power button for 5~10 secs. after it stucks on boot logo, and try if it reboots normally.
Or press Vol. up + Menu key and then power key for 5~10 secs it'd boot your phone into recovery mode.

m.b.jikre said:
Hold down power button for 5~10 secs. after it stucks on boot logo, and try if it reboots normally.
Or press Vol. up + Menu key and then power key for 5~10 secs it'd boot your phone into recovery mode.
Click to expand...
Click to collapse
Please reread my post. It's a persistent issue. Rebooting doesn't do anything. Recovery doesn't do anything.

What you willing to do? so I can guide you through the right way.
Sent from my GT-N7100 using XDA Premium 4 mobile app

m.b.jikre said:
What you willing to do? so I can guide you through the right way.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was wondering if anyone had a similar issue to mine and how to flash a custom rom after that. The only way I've found for the phone to work was to use ODIN to flash the stock firmware on it. After that, if I try to install a custom ROM, it goes back to the SAMSUNG screen at boot.
So if you, jikre, know how to fix this issue, I'm all ears.

This method has fixed numerous problems. Might be worth a try.
http://forum.xda-developers.com/showthread.php?t=2700479
chinoboy said:
I was wondering if anyone had a similar issue to mine and how to flash a custom rom after that. The only way I've found for the phone to work was to use ODIN to flash the stock firmware on it. After that, if I try to install a custom ROM, it goes back to the SAMSUNG screen at boot.
So if you, jikre, know how to fix this issue, I'm all ears.
Click to expand...
Click to collapse
benben333 said:
I installed teh wrong TWRP so i tried to install a different version via odin - but now my phone just goes to teh samsung screen and doesnt boot -
I tried to go throigh this guide http://forum.xda-developers.com/showthread.php?t=2024207 but
but it didnt work I am on the n17100 which is probably why
atm just wanna get back to my stock rom -
can i install a different twrp over this one via odin ? or should I not have done that
essentially I need to install the n7100 twrp then ill be okay - but not sure how from this loop pls help
Click to expand...
Click to collapse

Download a stock firmware and use ODIN v3.09 to flash it onto your phone. It should work.
http://forum.xda-developers.com/showthread.php?t=2499794

chinoboy said:
I was wondering if anyone had a similar issue to mine and how to flash a custom rom after that. The only way I've found for the phone to work was to use ODIN to flash the stock firmware on it. After that, if I try to install a custom ROM, it goes back to the SAMSUNG screen at boot.
So if you, jikre, know how to fix this issue, I'm all ears.
Click to expand...
Click to collapse
>>"Hold down power button for 5~10 secs. after it stucks on boot logo, and try if it reboots normally.
Or press Vol. up + Menu key and then power key for 5~10 secs it'd boot your phone into recovery mode."<<
If you wanted to install custom rom, if so, you can't flash it through Odin (Only for flashing for Official stuff ). Download a custom rom, whichever you wanted(Copy that rom on externel SD), reboot into recovery and by selecting 'wipe data and cache' >> 'clean to install a new rom'.
Then again coming to main menu select Install zip from sd, and redirect it to rom file which you've downloaded. In any custom rom like DN3, SenSonic they've full procedure for flashing the rom, just stick to it to install it perfectly...
Any quest?

m.b.jikre said:
>>"Hold down power button for 5~10 secs. after it stucks on boot logo, and try if it reboots normally.
Or press Vol. up + Menu key and then power key for 5~10 secs it'd boot your phone into recovery mode."<<
If you wanted to install custom rom, if so, you can't flash it through Odin (Only for flashing for Official stuff ). Download a custom rom, whichever you wanted(Copy that rom on externel SD), reboot into recovery and by selecting 'wipe data and cache' >> 'clean to install a new rom'.
Then again coming to main menu select Install zip from sd, and redirect it to rom file which you've downloaded. In any custom rom like DN3, SenSonic they've full procedure for flashing the rom, just stick to it to install it perfectly...
Any quest?
Click to expand...
Click to collapse
Jikre, I've already mentioned several times I know how to flash a recovery and custom ROM. I'm saying that the phone stops working after I try to do so.

chinoboy said:
Jikre, I've already mentioned several times I know how to flash a recovery and custom ROM. I'm saying that the phone stops working after I try to do so.
Click to expand...
Click to collapse
Got you man, i'm just saying that this problem of yours is come with the Andro v4.3 and knox bootloader. First if anyone tried to install custom recovery it get stuck on bootlogo, but that is an another factor you can reboot it manually into recovery menu.
On the end when you attempt to reboot (from recovery) it asks you to disable stock recovery and you reboot your phone normally, that's it!
Sent from my GT-N7100 using XDA Premium 4 mobile app

Ah okay, that makes sense. Unfortunately that doesn't apply to my situation. I had already been on a 4.3 custom rom for several months when the phone just died like that. As of right now, I can only get it to work if I flash a stock ROM on it.

chinoboy said:
Ah okay, that makes sense. Unfortunately that doesn't apply to my situation. I had already been on a 4.3 custom rom for several months when the phone just died like that. As of right now, I can only get it to work if I flash a stock ROM on it.
Click to expand...
Click to collapse
Just try to wipe your phone from custom recovery (Not 'Clean Flash' & It may work). Have you tried to disable to recovery at end when it asks?

m.b.jikre said:
Just try to wipe your phone from custom recovery (Not 'Clean Flash' & It may work). Have you tried to disable to recovery at end when it asks?
Click to expand...
Click to collapse
I have used both CWM and TWRP recoveries. Complete wipe every time before installing a new ROM. Still doesn't work. Only wiping and installing stock firmware through ODIN would the phone start.

chinoboy said:
I have used both CWM and TWRP recoveries. Complete wipe every time before installing a new ROM. Still doesn't work. Only wiping and installing stock firmware through ODIN would the phone start.
Click to expand...
Click to collapse
Which ROM you tried to flash? Can you upload a pic of PC Odin, showing how you flash the phone. Or just enlist the options.
Try flashing your phone by philz touch ('Wipe Data & Cache >> Clean to Install a New ROM" << Maybe your previous installation troubling to set a new one, If persist again try this method):
Instruction: http://forum.xda-developers.com/showthread.php?t=2028103
Downloads: http://goo.im/devs/philz_touch/CWM_Advanced_Edition
For flshing through PC Odin: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.25.0-n7100.tar.md5 (For N7100 Only).

freezed on boot logog
i have tried all the things like wipe the data go to recovery and all but its still stuck

T805 bad flash in Odin and no recovery with button combo

Hi everyone, some help is needed. Mistakenly when rooting my stock T805 with CF autoroot, tired and sleepy, I flashed it in Odin in BL (bootloader) and not in AP box as I should. Soft bricked it, couldn't go back to stock, somehow managed to install recovery, from there to some AOSP rom and finally to Xtrolite (which is great) .Anyhow, all is working now, EXCEPT, i still cannot flash stock rom in Odin, seems i destroyed bootloader but then again, I flashed stock bootloader-only file, i got recovery, any rom etc. Help is needed what to do??
Also, is this normal that VOL UP+ POWER+ HOME wont enter recovery?? I remember this when i bought it, with knox 0x0 and now also, with TWRP, i have to use an app to reboot to recovery?! weird...
Cheers!

If you had trashed the bootloader you wouldn't even have a bootable device, it would be bricked.
Not getting into recovery is purely pilot error.
You need to give more details regarding flashing the stock rom, screen shots etc.

Part of the problem was that i couldn't enter recovery with button combo but needed to have working rom with special app or 4 way reboot mod. When flashing stock rom (either 4.4.2 or 5.0) at the end of the proccess it says: FAIL (red).

domagoj_zg said:
Part of the problem was that i couldn't enter recovery with button combo but needed to have working rom with special app or 4 way reboot mod. When flashing stock rom (either 4.4.2 or 5.0) at the end of the proccess it says: FAIL (red).
Click to expand...
Click to collapse
You need to post a screen shot of the flash process in Odin.
I'll reiterate, regarding entering recovery mode is 99% of times user error.
From power off hold POWER + HOME + VOL UP until recovery boots.

ashyx said:
You need to post a screen shot of the flash process in Odin.
I'll reiterate, regarding entering recovery mode is 99% of times user error.
From power off hold POWER + HOME + VOL UP until recovery boots.
Click to expand...
Click to collapse
Tnx. Finally managed to find some time and clear this one out. It was LP bootloader issue, appareantly you can go back only to some 4.4.2 bootloaders/roms and some not.
I got another brain puzzling issue with my Nexus 10, please share some insight....http://forum.xda-developers.com/nexus-10/help/nexus-10-half-to-bricked-t3210005

Help with rooting (or something) gone wrong on Samsung GT-N5120

Hi!
My neighbors (11-year old) son apparently tried to root their Samsung GT-N5120 with something called King Root(??). I don't know more than that and they asked me to fix it cause (you know computers) -.-.
The problem is that it's stuck in boot loop. It boots up and it shows the screen and all but it doesn't happen anything and then it reboots. Now what i've tried is to start it in recovery mode (Volume Up + menu button + power button) and i've tried to do a factory reset but it didn't work. From what i've read i think he has overwritten those files that the factory reset needs. So what can I do? It doesn't seem to be bricked since it starts and I can start it in both recovery mode and download mode. My computer reacts when I plug it in and tries to install drivers and so forth (but it won't show up on My Computer). So something probably can be done I just don't know what to do. Any ideas?

ffxtidus10 said:
boots up and it shows the screen and all but it doesn't happen anything and then it reboots. Ne
Click to expand...
Click to collapse
when it boot ups can you work with phone (going to menu or sth)
does it reboot immediately or after some time?

darknessd31 said:
when it boot ups can you work with phone (going to menu or sth)
does it reboot immediately or after some time?
Click to expand...
Click to collapse
If I start it normally it gets stuck a while on the animation screen, then it restarts, is stuck a while and so on. If I boot it up in recovery mode (home+power+vol up) I can navigate those menus and if I boot it up in download mode (home+power+vol down) I can navigate in those menus.

ffxtidus10 said:
If I start it normally it gets stuck a while on the animation screen, then it restarts, is stuck a while and so on. If I boot it up in recovery mode (home+power+vol up) I can navigate those menus and if I boot it up in download mode (home+power+vol down) I can navigate in those menus.
Click to expand...
Click to collapse
try installing king root on your computer and unrooting the device if that didn't help you can install a custom ROM through recovery or a stock ROM through Odin.

darknessd31 said:
try installing king root on your computer and unrooting the device if that didn't help you can install a custom ROM through recovery or a stock ROM through Odin.
Click to expand...
Click to collapse
I think I would like to install a custom ROM either through recovery or through Odin (the one that's easiest). The thing is I don't really know where to begin when it comes to tutorials and such, do you have any suggestions of a good tutorial of how to do that? And if you have a link for a custom ROM (or stock ROM) that would work for this device I would reeeally appreciate it!

ffxtidus10 said:
I think I would like to install a custom ROM either through recovery or through Odin (the one that's easiest). The thing is I don't really know where to begin when it comes to tutorials and such, do you have any suggestions of a good tutorial of how to do that? And if you have a link for a custom ROM (or stock ROM) that would work for this device I would reeeally appreciate it!
Click to expand...
Click to collapse
1. try downloading a custom recovery twrp or cwn (i myself use twrp)
2. go into your stock recovery and install the recovery you can also flash the recovery with odin informations are provided where you download the recovery
3. choose a custom rom there are several custom roms on xda choose the one you like read the first page for busgs and information about that rom
4. do a full wipe and flash the rom agian tutrials on flashing the rom should be on the first page of the rom you download
**since i have n5100 not n5120 i cannot recommond you a special rom
** be very careful you should just install the recovery and rom for your device as you said n5120 else you may hard brick the tablet.

darknessd31 said:
1. try downloading a custom recovery twrp or cwn (i myself use twrp)
2. go into your stock recovery and install the recovery you can also flash the recovery with odin informations are provided where you download the recovery
3. choose a custom rom there are several custom roms on xda choose the one you like read the first page for busgs and information about that rom
4. do a full wipe and flash the rom agian tutrials on flashing the rom should be on the first page of the rom you download
**since i have n5100 not n5120 i cannot recommond you a special rom
** be very careful you should just install the recovery and rom for your device as you said n5120 else you may hard brick the tablet.
Click to expand...
Click to collapse
Hi! Thanks for the advice, I will try it out when I have the time. And thanks for your time!