Develop Bugs

Rockin' a case, or running naked?

Was just wondering if you guys are or are not using a case, holster, ect. for your phone.
if your are using one if you could say which one and maybe some pros/cons, how you like it type of stuff.
I'm currently waiting on the otter box commuter to arrive, I had the incipio case much like the commuter and loved it but felt the commuter would add the extra protection I need.

Naked. I can't find a good case for my Dinc2 with ext battery.
Sent from my ADR6350 using XDA Premium App

Case. Really like the new kickstand Verizon case. Sits the phone up AND awesome holder for the finger when using it. Doesnt protect the whole phone though so Im going with the eBay Griffin Reveal look alike for now.

Boogersugar83 said:
Naked. I can't find a good case for my Dinc2 with ext battery.
Sent from my ADR6350 using XDA Premium App
Click to expand...
Click to collapse
Naked, for the same reason.

I'm going nude also. I roll with a naked Dinc2 because the slimness was one of the reasons I chose this phone, and since it is on my works company plan, if anything does happen to it I will get a new one no charge (to me that is, my company may get hit with a bill).

Has anybody tried the body glove for the Inc2.
Sent from my incredible 2 using XDA Premium App

Running naked. I don't like how cases bulk up the phone. Haven't run with a case for many years now across several devices without incident, and my devices have survived numerous drops.

I have the silicone one from the verizon store naked feels too slippery to me i'm afraid its going to slip out of my hand on the subway. Its doing pretty good. dropped it once on the stairs in the subway and its still fine. the only thing that bothers me is sometimes i have to take the case off to use the headphones jack. can anyone recommend another one? (i like silicone cause it lets me get a good grip on it. too afraid i'd drop it otherwise)

Anybody check out the TPU cases for this phone? I also admire the slimness of the DInc2 and was thinking about this as an alternative to both hard and silicone cases.
Cheap on Amazon too.
EDIT...nvm saw the TPU thread down below. Definitely getting one!

Using the Incipio two piece case half the time, the other half running naked just for the slimness of the phone

Naked.
Look at this phone. It's basically already wearing a case. I mean, I know accidents happen but I feel like this phone was designed to not need one.

I have the otterbox defender series and love it. Adds a lot of bulk if your not into that.
Would love to get there extended battery if they would get a case to fit it.
Sent 2 u via Incredible 2

thenickisme said:
Naked.
Look at this phone. It's basically already wearing a case. I mean, I know accidents happen but I feel like this phone was designed to not need one.
Click to expand...
Click to collapse
once you scratch that aluminum in the front though you will be sorry. even WITH a case I dropped my phone in between my dashboard in my car and my seat and it scratched the aluminum so I had a nice long scratch of the aluminum. sucks.

ACD168 said:
once you scratch that aluminum in the front though you will be sorry. even WITH a case I dropped my phone in between my dashboard in my car and my seat and it scratched the aluminum so I had a nice long scratch of the aluminum. sucks.
Click to expand...
Click to collapse
Aluminum? On the earpiece grill? That's the only part I can think of that you're referring to...

the whole front is aluminum from what i saw from the scratch. it sure isn't plastic..
the entire casing besides the back case,, give it a run with ur finger nail, once that starts chipping, or you scratch it you will see what i mean, i could be way off with the aluminum but it sure isnt plastic like inc1

ACD168 said:
the whole front is aluminum from what i saw from the scratch. it sure isn't plastic..
the entire casing besides the back case,, give it a run with ur finger nail, once that starts chipping, or you scratch it you will see what i mean, i could be way off with the aluminum but it sure isnt plastic like inc1
Click to expand...
Click to collapse
It is something close to aluminum or other soft metal, at least that's what I thought. I also scratched the edge of mine just taking off a mobi hard plastic case I bought. Didn't take much at all to make a scratch.
Now, the back is plastic but made to feel the same as the front but I'm pretty sure it's not.

mountaineerndixie said:
It is something close to aluminum or other soft metal, at least that's what I thought. I also scratched the edge of mine just taking off a mobi hard plastic case I bought. Didn't take much at all to make a scratch.
Now, the back is plastic but made to feel the same as the front but I'm pretty sure it's not.
Click to expand...
Click to collapse
I agree 100%.
if it's the hard gel case from verizon, I bought mine the day it came out, it was the only gel case they had, but they gave me a full refund as there was a Tech Bulliten out fromm what I read here on the forusms, no receipt or anything and it was a diff store and got my money back so I was happy, cmae home and ordered an ottterbox. sucks just from a case the potential for damage is there. hopefully in a few months we don't have a bunch of complaints about this. I returned my scratched device for a refurb. no charge. told them it happened with a case on it. they had no prblem with refurbing it.

Using a cheap TPU case off Amazon for now. Waiting to find that "perfect" case for my prem-case.
I wish they made these for the DInc2. I would pay big bucks for that.

TheAtheistReverend said:
Using a cheap TPU case off Amazon for now. Waiting to find that "perfect" case for my prem-case.
I wish they made these for the DInc2. I would pay big bucks for that.
Click to expand...
Click to collapse
wood? I wonder how well that would protect that. personally I would never put that on my phone. but it's cool. I am awaiting on the otter box commuter to arrive on Tuesday, and I can say from experience, that otter box is very well made cases, and come with a screen protector if you're into that.. I don't use them, but I will give pictures and a review once the case comes and I use it for a day or two. high quality case, can get it cheap on amazon, and great brand name, that isn't bulky. they also make a defender case, which isn't my style but looks like a truck could run over it and be fine lol.
links
commuter - LINK
defender - LINK

Yeah, I used the Seidio for my Eris, and I am considering it for my DInc2. Never been real hot on the Otterbox look, though I haven't seen one in person. I like my cases low profile and simple looking. Maybe I'll meet an Otterbox one day and fall in love.
I don't even care if the wood case broke the first time I dropped it. If I could find a good one I would rock that thing like hobos rock trench coats and buy another if it broke.
I wood pay more for the case than I would the phone.

[Q] Best SGS2 Cases Available

Hi,
I'm waiting for my Samsung Galaxy S II to arrive in the mail that I just bought on Ebay for $770 CAD. I was wondering what were the best cases available that won't detract from the phone's, 'sexyness'. Here are a few cases I thought looked nice on Ebay:
Barely There Case:
http://cgi.ebay.ca/ws/eBayISAPI.dll...00292&ssPageName=STRK:MEWAX:IT#ht_2449wt_1115
Leather 'Wallet' Case:
http://cgi.ebay.ca/ws/eBayISAPI.dll...58999&ssPageName=STRK:MEWAX:IT#ht_3824wt_1115
Mesh Case:
http://cgi.ebay.ca/Samsung-Genuine-...Accessories&hash=item2a119b4aec#ht_4050wt_957
Does anyone know what would be the best case for what I'm looking for? I'm focused on quality and looks rather than the price.
UPDATE: I just read the thread rules that stated "no advertising of any kind". Please note that I am not advertising these products. I am only posting them here for comparative purposes, with no intention to sell any products.
UPDATE 2: I bought the "barely there TOUGH" case. It was a little more expensive than the average case (I think it's going for 30 on ebay as of dec 16) but let me tell you, it is probably the only case you'll ever need for this phone. It feels like my phone is wearing a badass suit while still lookin fresh. Buy this case. You'll love it.
Jamie

DJ_Junkee said:
Hi,
I'm waiting for my Samsung Galaxy S II to arrive in the mail that I just bought on Ebay for $770 CAD. I was wondering what were the best cases available that won't detract from the phone's, 'sexyness'. Here are a few cases I thought looked nice on Ebay:
Space Case:
http://cgi.ebay.ca/ws/eBayISAPI.dll...00292&ssPageName=STRK:MEWAX:IT#ht_2449wt_1115
Leather 'Wallet' Case:
http://cgi.ebay.ca/ws/eBayISAPI.dll...58999&ssPageName=STRK:MEWAX:IT#ht_3824wt_1115
Mesh Case:
http://cgi.ebay.ca/Samsung-Genuine-...Accessories&hash=item2a119b4aec#ht_4050wt_957
Does anyone know what would be the best case for what I'm looking for? I'm focused on quality and looks rather than the price.
UPDATE: I just read the thread rules that stated "no advertising of any kind". Please note that I am not advertising these products. I am only posting them here for comparative purposes, with no intention to sell any products.
Jamie
Click to expand...
Click to collapse
barely there and mesh case are similar..both are slim ,light.. both look perfect..
mesh case has holes that might help on heat transfer from the phone,and can be removed much easier than the barely there case..
both do not cover top and bottom of the phone(barely there protects about 0.5cm more)..
in terms of the two in my opinion mesh case is better,,
the other case protects much more..but makes your phone extra large..
its a matter of personal taste

I like the mesh case, but I doubt these cases will protect the phone from any falls. I really like the Rearth case, and the mesh case. I'm waiting now for a Case-Mate Pop case I'm going to review, which will be out in august or september as I was told from CM. The best thin cases? I really REALLY like the Rearth case. I reviewed it just yesterday, check out my sig for that. The Mesh case, which I also own, are very good, and leave the phone all sexy ... The CM cases, I don't like the barely there case series. I don't know why. It makes it look too plain.

ive got the mesh case in black look great on the phone and as already stated really easy to take on and off but it does collect dust and dirty under it like a magnet. plus probably not much protection if dropped

I've got the casemate tough n it is nice, stops dust n grease, would defiantly protect from a fall. However the phone gets stupidly hot n stays hot for ages. Just ordered a mesh case to see how that goes
Sent from my GT-I9100 using XDA Premium App

I have the samsung mesh in white and it collected dust under it like nobodys business! It looks sooo sexy though! Solution? I ordered a Zagg maximum protection and installed it on the back and sides... Like stated before, the case is so easy to put on it wrapped right around it perfect and you cant even tell its there. So i am totally protected (from scratches) and still look sexy and slim.
Sent from my GT-I9100 using XDA App

daddymatt said:
I have the samsung mesh in white and it collected dust under it like nobodys business! It looks sooo sexy though! Solution? I ordered a Zagg maximum protection and installed it on the back and sides... Like stated before, the case is so easy to put on it wrapped right around it perfect and you cant even tell its there. So i am totally protected (from scratches) and still look sexy and slim.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
this is the best solution..zagg for the corners and mesh case..

coming soon
http://www.otterbox.com/Samung-Galaxy-S-II-Commuter-Series-Case/SAM4-I9100,default,pd.html

Don't care for the mesh case... tops and bottoms are completely exposed.
I'm using the SGP Ultra Capsule in Soul Black, fantastic case.

I'm waiting for this case to be back in stock: http://www.senacases.com/samsung-cases/galaxy-s-2/ultraslim/
I love how thin this phone is and I dont want to ruin it with something bulky.

Check these out, not yet available but seems to be really good
http://www.otterbox.com/samsung-cases/samsung-cases,default,sc.html

Could someone please recommend a good slip-in pouch for the GS2?
I don't feel comfortable with the hard plastic cases, as they tend to harm the phone body after sometime..

anti-derivative said:
coming soon
http://www.otterbox.com/Samung-Galaxy-S-II-Commuter-Series-Case/SAM4-I9100,default,pd.html
Click to expand...
Click to collapse
niketshah11 said:
Check these out, not yet available but seems to be really good
http://www.otterbox.com/samsung-cases/samsung-cases,default,sc.html
Click to expand...
Click to collapse
Thanks guys,
I think the Ottercase looks the best so far, as it seems to have the most protection. My only concern is that it may make the phone look too bulky.
Any experience with these cases?
Jamie

I bought this one... cheap and great
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=120702657798&ssPageName=STRK:MEWNX:IT

I've got both the Casemate barely there and the genuine mesh case (black with italic S character).
Both are thin, lightweight and adds a better grip without making it difficult to put the phone in and out of your pocket (I use tight pants ). In fact they are very similar, but the barely there has a bit more matte color, and is a tad more gray when compared to the completely black mesh case. Also the mesh case feels a tad better in the hand, and is easier to take on and off (it still sits firmly on the phone).
As you are talking about keeping the sexiness of the phone, I would recommend the mesh case But they both are good, so you won't be disappointed either way.

nicpol7 said:
barely there and mesh case are similar..both are slim ,light.. both look perfect..
mesh case has holes that might help on heat transfer from the phone,and can be removed much easier than the barely there case..
both do not cover top and bottom of the phone(barely there protects about 0.5cm more)..
in terms of the two in my opinion mesh case is better,,
the other case protects much more..but makes your phone extra large..
its a matter of personal taste
Click to expand...
Click to collapse
Hrti said:
I've got both the Casemate barely there and the genuine mesh case (black with italic S character).
Both are thin, lightweight and adds a better grip without making it difficult to put the phone in and out of your pocket (I use tight pants ). In fact they are very similar, but the barely there has a bit more matte color, and is a tad more gray when compared to the completely black mesh case. Also the mesh case feels a tad better in the hand, and is easier to take on and off (it still sits firmly on the phone).
As you are talking about keeping the sexiness of the phone, I would recommend the mesh case But they both are good, so you won't be disappointed either way.
Click to expand...
Click to collapse
Thanks for your input Hrti!
I heard a few other people saying that the mesh case doesn't quite cover the whole entire phone. And while the 'sexyness' is a huge factor, I am more concerned about keeping the phone completely protected. Cuz I'd be devastated if anything ever happened to my baby. lol.
Keep the suggestions coming!
Jamie

see my thread:
http://forum.xda-developers.com/showthread.php?t=1096459
i think these will be the best, D3O FTW

mucury case?
Has anyone had any experience with these?
It's called the "Mucury" case, I can only find it on ebay.
http://cgi.ebay.ca/i9100-samsung-ga...Accessories&hash=item2a10785213#ht_3691wt_957
Is it a good quality case? i.e. will it protect the phone from a fall at waist height?
Jamie

bassmonkey said:
I've got the casemate tough n it is nice, stops dust n grease, would defiantly protect from a fall. However the phone gets stupidly hot n stays hot for ages. Just ordered a mesh case to see how that goes
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Got mesh case, now back using the case mate tough. Not sure what the mesh cases point is, top n bottom completely exposed, its a dust magnet. My phone dropped from the arm of the sofa and it came clean off. I suppose it does look nice but if that's the main concern and you're not bothered about the non protection it provides you may as well not have a case. That's just my opinion anyway
Sent from my GT-I9100 using XDA Premium App

bassmonkey said:
Got mesh case, now back using the case mate tough. Not sure what the mesh cases point is, top n bottom completely exposed, its a dust magnet. My phone dropped from the arm of the sofa and it came clean off. I suppose it does look nice but if that's the main concern and you're not bothered about the non protection it provides you may as well not have a case. That's just my opinion anyway
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Thanks for writing that - I dropped my phone last night indoors on a carpet, and I've always used the mesh case - but it popped straight off and the phone and the case were about a meter apart when they settled.... (phone was fine btw). It got me thinking if I dropped that on concrete or something it'd be pretty badly damaged!
Was looking at the case mate tough - and it's not till I just read your post now that it's convinced me to get one!

Finally, a protective case by Ballistic!!

get it here
http://www.goballisticcase.com/prod...c-4g-touch-ballistic-shell-gel-sg-series-case
here's a 20% off coupon; not sure if it will work for you..
SURVEY921

nice
does it come in black/red?
and once you get this case,how do you carry around?
i need a holster

it comes in black/black, and black pink..
No holster, just stuff it in your pocket...
its not as gigantic as their HC cases are; those you can drop from a rooftop and the phone won't crack...
this one should survive any drop from 7 feet or less...they have a video of them testing it on the webpage listed above..

wase4711 said:
it comes in black/black, and black pink..
No holster, just stuff it in your pocket...
its not as gigantic as their HC cases are; those you can drop from a rooftop and the phone won't crack...
this one should survive any drop from 7 feet or less...they have a video of them testing it on the webpage listed above..
Click to expand...
Click to collapse
thread posted earlier with pic, order site, video review link, and colors.
everything but coupon code
http://forum.xda-developers.com/showthread.php?t=1330028

Can anyone tell me--how does this compare to the TPU case?

babyqtangel said:
Can anyone tell me--how does this compare to the TPU case?
Click to expand...
Click to collapse
i will tell ya in a few days to a week when mine comes in. i have this on it now - http://www.amazon.com/gp/product/B005MGUTW6

babyqtangel said:
Can anyone tell me--how does this compare to the TPU case?
Click to expand...
Click to collapse
its about 10 times more protective than any tpu case..
its bigger and bulkier, so, if you don't want that, then don't get one...

Nice find. Thanks. Will be ordering one.
Sent from my GT-P7510

looks like it adds extra grip on the phone but kinda makes the phone look a little bulky imo.

looks good!!

has anyone received theirs yet?
I ordered mine first day, but, I am in chicago, so its probably a couple more days

Anyone know if/when they are going to have the HC case? Had one for my Evo, and I would love to have one for the E4GT.
Sent from my SPH-D710 using Tapatalk

they told me awhile ago that they were, but some have reported that they were told they were not...
I'd prefer the HC case as well, but, something is better than nothing...

That looks nice. I'll have to get that. The phone is actually too light for me.
I had the G2 before and that was pretty heavy. I think I'll have to pick one of these up.
Hmm... I need to go thank the OP.

Holy Cr$P!!
This thing is awesome.
It puts the case mate tough to shame!!!!
I retruned the case mate and got this.
Extremely happy!!!
WEEEEE

yea, this is the toughest case out, for now, for this phone..
Hoping the ballistic hc comes out for this, so I can feel 100 confident that the phone is protected..

wase4711 said:
yea, this is the toughest case out, for now, for this phone..
Hoping the ballistic hc comes out for this, so I can feel 100 confident that the phone is protected..
Click to expand...
Click to collapse
What is the diff. between SG and HC? is the HC phone/polycarbonate/silicon?
It's quiet comforting knowing my phone will no longer be at risk.
I've already done a 7 ft. drop test with it and am impressed.
I like how the feel is on the power button and volume as well (much easier to press than on the TPU case.
-RR

Here is what the hc cases are all about..
http://www.goballisticcase.com/products/iphone-4-4s-ballistic-hc-series-case
I dont understand why so many people like the TPU cases; the're just a cheap piece of vinyl, and do nothing to protect your phone from a drop on a hard surface, like concrete..they are super cheap, I guess, considering there is only a few pennies in vinyl to make them, so maybe its the price that makes them so attractive..

wase4711 said:
Here is what the hc cases are all about..
http://www.goballisticcase.com/products/iphone-4-4s-ballistic-hc-series-case
I dont understand why so many people like the TPU cases; the're just a cheap piece of vinyl, and do nothing to protect your phone from a drop on a hard surface, like concrete..they are super cheap, I guess, considering there is only a few pennies in vinyl to make them, so maybe its the price that makes them so attractive..
Click to expand...
Click to collapse
For me it was keeping the camera from scratching while on a table... It protected that.
Also, it kept the phone from having direct contact with surfaces (to avoid scratch)... yah it would probably break if dropped, but if you rubbed up on a hard surface, at least the phone wouldn't scratch

We just got the all black ones in store today
I work at a corporate storestore
Sent from my SPH-D710 using xda premium

Case-Mate S3 Case(s) - Got Mine

So Pre-Ordered Sprint GSIII,
Unlike some, I need some light protection, i never drop a phone but overall I am pretty rough.
Started looking for cases and I came across case-mate who i have gotten cases for in the past for my iPhone2G and EVO4G.
http://www.case-mate.com/Samsung-Galaxy-S-III-Cases/Samsung-Galaxy-S-III-Cases.asp
The Barely There Brushed Aluminum one caught my eye
I thought to myself should i pay $40 (absolutely overpriced mind you) or buy a $5-10 eBay Snap or TPU case. I decided **** it, if you got it--smoke it.
Got the case in presumably almost a week before i got the phone!
Do I think the money was well spent? No but Ill see when i get the phone. I can say the case is lighter than any case i've owned, and the real metal backing is a cool touch, hopefully it doesn't peel off
pics attached, decided to throw my old Evo and Photon into the photos to show just how big this phone is.

crap wont forum!
sorry!!!!!!!!!!!!!!
Edit: Thanks for the move

att is gonna sell the EXACT same thing for 50% off, $20. 40 bucks for an accessory that prolly cost 3.00..

whiting for tough case

I bought a white, plastic Case mate barely there case for my white S3 last week. To be honest i'm not too keen on it and have been using the other cheap TPU case instead.
I find that the button openings and the curved sides of the phone and the glossy/slippery plastic of the case don't go too well together. It seems when I hold the phone and use either the power/unlock or volume buttons it feels like it's going to slip out of my hand.
I'm sure some people will like it but it's really not for me. Plus i've changed to the blue version and it doesn't match as nicely

http://www.ebay.com/itm/New-Deluxe-...cessories&hash=item3f18abac2f#ht_11310wt_1014
http://www.ebay.com/itm/New-Sliver-...893360?pt=PDA_Accessories&hash=item4166ff7ab0

knarfl1 said:
http://www.ebay.com/itm/New-Deluxe-...cessories&hash=item3f18abac2f#ht_11310wt_1014
http://www.ebay.com/itm/New-Sliver-...893360?pt=PDA_Accessories&hash=item4166ff7ab0
Click to expand...
Click to collapse
I saw some like this before i bought mine, and the other snap on cases and TPU ones. they Look really thick,
Like i said, its probably not worth the money i spent ($11 vs $40 ... im pretty sure which way most people are going to go) but there is some quality in the build at least. I don't know how much i can stress how thin and light the barely there brushed aluminum is.

Could you please provide a link for that case?
Definitely interested in picking it up at that price!
EDIT. Tried quoting but failed.
Could someone post the link for the case mate at 50% off? Please and ty!
Sent from my Galaxy Nexus using xda premium

kyan~ said:
att is gonna sell the EXACT same thing for 50% off, $20. 40 bucks for an accessory that prolly cost 3.00..
Click to expand...
Click to collapse
what the.. I'm totally getting this!

I wonder if it would reduce to the phone signal when you put it on.

wings76 said:
I wonder if it would reduce to the phone signal when you put it on.
Click to expand...
Click to collapse
only the flat back part is aluminum, the rest is a thin plastic material, its glued onn so I doubt it. Not sure why the ATT description says faux when im holding the case right now and there is a real aluminum backing on it.
but when i have both the phone and case ill find out. If it does affect the signal then that is money down the drain!

Glod said:
only the flat back part is aluminum, the rest is a thin plastic material, its glued onn so I doubt it. Not sure why the ATT description says faux when im holding the case right now and there is a real aluminum backing on it.
but when i have both the phone and case ill find out. If it does affect the signal then that is money down the drain!
Click to expand...
Click to collapse
Had one on my SII and it didn't affect it at all

Glod said:
only the flat back part is aluminum, the rest is a thin plastic material, its glued onn so I doubt it. Not sure why the ATT description says faux when im holding the case right now and there is a real aluminum backing on it.
but when i have both the phone and case ill find out. If it does affect the signal then that is money down the drain!
Click to expand...
Click to collapse
LOL.
http://www.case-mate.com/Samsung-Ga...xy-S3-Brushed-Aluminum-Barely-There-Cases.asp
you think its real aluminum. LOL. its called brushed aluminum for a reason

Does NFC still work? That would be an absolute deal breaker for me. I live on NFC.
Sent from my GT-I9300 using Tapatalk 2

"the brushed aluminum effect makes a solid statement. "
From their description

X-Level clear TPU case, for the minimalist case user! (Pixel 2 XL)

Just received some of the Clear X-Level TPU case I found and ordered, it is .78mm with clear matte edges all around that feel great in hand.
https://photos.app.goo.gl/YNDccnTmGaIv250z1
The case is similar to the 'MNML' case in that it does not provide a lip for the screen, but it does hug the screens curves to provide a bit more protection in case of accidental drops since it is made of TPU. Dont get me wrong, it is not not a drop proof case at all, but even thin TPU material can absorb more of an impact than hard plastic, and with a good screen protector you're set. The camera is also ever so recessed enough that it wont hit flat surfaces when placed on them. The buttons are also feel great and tactile.
The only thing that may bother some, but doesn't bother me since it isnt that noticeable from afar, is that even though it has the "dot buffer" most clear tpu cases have, it still shows some "water markings" where the case meets the back glass. This is likely because of how thin the case is, and how the back glass curves and melts into the 2 XL's corners. The case will also likely yellow and scratch over time, but that is why I got a small supply lol. I'll be able to swap them out as needed since it will be my daily for a while.
(On a side note) If anyone is interested I would also be wiling to sell some of the extra I have. I know it sounds like an ad for me to sell... but I just feel I got more than I needed.. and it seems these are hard to get in the US for some reason. So if you are just let me know, id do $12 shipped, first class, US. If you want more than one Id do a deal cause of shipping as well! If I have more than one left i want to sell that is lol

I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.

scottjal said:
I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.
Click to expand...
Click to collapse
It actually does. The L&K is about as thick as the Ringke Bevel. I had the "Pleson" version of it (theyre both the same just rebranded) and that is how thick it felt. The X-Level is .78mm thin.

Have a link for where you got it?
Sent from my iPhone using Tapatalk

zaydaboss said:
Have a link for where you got it?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.

Nocturnal86 said:
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.
Click to expand...
Click to collapse
Check your PayPal

zaydaboss said:
Check your PayPal
Click to expand...
Click to collapse
Check your PM's, need your address

Nocturnal86 said:
Check your PM's, need your address
Click to expand...
Click to collapse
Loving this case. Was concerned it would crack like the mnml ones it's tpu so that won't be a issue this will keep me from going commando I hate cases

You have a spare case to sell me?

rfuser said:
You have a spare case to sell me?
Click to expand...
Click to collapse
Just saw this, sent you a PM

What about sending one up north to Canada, eh?

evanwier said:
What about sending one up north to Canada, eh?
Click to expand...
Click to collapse
If you pay for shipping along with the case lol

eBay got the hook-up: https://www.ebay.com/itm/X-Level-Pu...-Slim-Armor-Clear-Soft-TPU-Cover/222698641914
It took 23 days to reach me in Los Angeles from China.
Just got mine yesterday and I love it. I've been on the hunt for a good clear case to show off the phone. I first had the Spigen Liquid Crystal but it added a bit too much bulk for my liking. This one is just thick enough to protect the rear camera lens when the device is resting face-up. My only complaints are that:
1. there is no lip to protect the screen if I want to set the phone face-down (seems to be common amongst slim cases), and
2. the cut-outs are a bit sharp from being unfinished (though really this is not a big deal for me).
The fingerprint reader cut-out is a bit off-center but at a glance it isn't noticeable for me.

Unfortunately after some time (2 weeks) case has weird bluish discoloration.
I'm assuming this came from holding my phone in pocket (jeans).
I have also Ringke clear case and same story, same discoloration.

been using this for more than half year, same as other tpu case, it will turn yellow as time goes by.