Develop Bugs

Rockin' a case, or running naked?

Was just wondering if you guys are or are not using a case, holster, ect. for your phone.
if your are using one if you could say which one and maybe some pros/cons, how you like it type of stuff.
I'm currently waiting on the otter box commuter to arrive, I had the incipio case much like the commuter and loved it but felt the commuter would add the extra protection I need.

Naked. I can't find a good case for my Dinc2 with ext battery.
Sent from my ADR6350 using XDA Premium App

Case. Really like the new kickstand Verizon case. Sits the phone up AND awesome holder for the finger when using it. Doesnt protect the whole phone though so Im going with the eBay Griffin Reveal look alike for now.

Boogersugar83 said:
Naked. I can't find a good case for my Dinc2 with ext battery.
Sent from my ADR6350 using XDA Premium App
Click to expand...
Click to collapse
Naked, for the same reason.

I'm going nude also. I roll with a naked Dinc2 because the slimness was one of the reasons I chose this phone, and since it is on my works company plan, if anything does happen to it I will get a new one no charge (to me that is, my company may get hit with a bill).

Has anybody tried the body glove for the Inc2.
Sent from my incredible 2 using XDA Premium App

Running naked. I don't like how cases bulk up the phone. Haven't run with a case for many years now across several devices without incident, and my devices have survived numerous drops.

I have the silicone one from the verizon store naked feels too slippery to me i'm afraid its going to slip out of my hand on the subway. Its doing pretty good. dropped it once on the stairs in the subway and its still fine. the only thing that bothers me is sometimes i have to take the case off to use the headphones jack. can anyone recommend another one? (i like silicone cause it lets me get a good grip on it. too afraid i'd drop it otherwise)

Anybody check out the TPU cases for this phone? I also admire the slimness of the DInc2 and was thinking about this as an alternative to both hard and silicone cases.
Cheap on Amazon too.
EDIT...nvm saw the TPU thread down below. Definitely getting one!

Using the Incipio two piece case half the time, the other half running naked just for the slimness of the phone

Naked.
Look at this phone. It's basically already wearing a case. I mean, I know accidents happen but I feel like this phone was designed to not need one.

I have the otterbox defender series and love it. Adds a lot of bulk if your not into that.
Would love to get there extended battery if they would get a case to fit it.
Sent 2 u via Incredible 2

thenickisme said:
Naked.
Look at this phone. It's basically already wearing a case. I mean, I know accidents happen but I feel like this phone was designed to not need one.
Click to expand...
Click to collapse
once you scratch that aluminum in the front though you will be sorry. even WITH a case I dropped my phone in between my dashboard in my car and my seat and it scratched the aluminum so I had a nice long scratch of the aluminum. sucks.

ACD168 said:
once you scratch that aluminum in the front though you will be sorry. even WITH a case I dropped my phone in between my dashboard in my car and my seat and it scratched the aluminum so I had a nice long scratch of the aluminum. sucks.
Click to expand...
Click to collapse
Aluminum? On the earpiece grill? That's the only part I can think of that you're referring to...

the whole front is aluminum from what i saw from the scratch. it sure isn't plastic..
the entire casing besides the back case,, give it a run with ur finger nail, once that starts chipping, or you scratch it you will see what i mean, i could be way off with the aluminum but it sure isnt plastic like inc1

ACD168 said:
the whole front is aluminum from what i saw from the scratch. it sure isn't plastic..
the entire casing besides the back case,, give it a run with ur finger nail, once that starts chipping, or you scratch it you will see what i mean, i could be way off with the aluminum but it sure isnt plastic like inc1
Click to expand...
Click to collapse
It is something close to aluminum or other soft metal, at least that's what I thought. I also scratched the edge of mine just taking off a mobi hard plastic case I bought. Didn't take much at all to make a scratch.
Now, the back is plastic but made to feel the same as the front but I'm pretty sure it's not.

mountaineerndixie said:
It is something close to aluminum or other soft metal, at least that's what I thought. I also scratched the edge of mine just taking off a mobi hard plastic case I bought. Didn't take much at all to make a scratch.
Now, the back is plastic but made to feel the same as the front but I'm pretty sure it's not.
Click to expand...
Click to collapse
I agree 100%.
if it's the hard gel case from verizon, I bought mine the day it came out, it was the only gel case they had, but they gave me a full refund as there was a Tech Bulliten out fromm what I read here on the forusms, no receipt or anything and it was a diff store and got my money back so I was happy, cmae home and ordered an ottterbox. sucks just from a case the potential for damage is there. hopefully in a few months we don't have a bunch of complaints about this. I returned my scratched device for a refurb. no charge. told them it happened with a case on it. they had no prblem with refurbing it.

Using a cheap TPU case off Amazon for now. Waiting to find that "perfect" case for my prem-case.
I wish they made these for the DInc2. I would pay big bucks for that.

TheAtheistReverend said:
Using a cheap TPU case off Amazon for now. Waiting to find that "perfect" case for my prem-case.
I wish they made these for the DInc2. I would pay big bucks for that.
Click to expand...
Click to collapse
wood? I wonder how well that would protect that. personally I would never put that on my phone. but it's cool. I am awaiting on the otter box commuter to arrive on Tuesday, and I can say from experience, that otter box is very well made cases, and come with a screen protector if you're into that.. I don't use them, but I will give pictures and a review once the case comes and I use it for a day or two. high quality case, can get it cheap on amazon, and great brand name, that isn't bulky. they also make a defender case, which isn't my style but looks like a truck could run over it and be fine lol.
links
commuter - LINK
defender - LINK

Yeah, I used the Seidio for my Eris, and I am considering it for my DInc2. Never been real hot on the Otterbox look, though I haven't seen one in person. I like my cases low profile and simple looking. Maybe I'll meet an Otterbox one day and fall in love.
I don't even care if the wood case broke the first time I dropped it. If I could find a good one I would rock that thing like hobos rock trench coats and buy another if it broke.
I wood pay more for the case than I would the phone.

Great case.

Just got this in the mail. It covers all of my buttons (volume rocker, and power) and leaves everything lined up perfectly for the plugs. It fits like a glove, and it has a perfect silicone feel to it. I paid 7.95, and the shipping was very fast. From CA to MI, I got it in 4 days with no extra shipping charges.
Link: http://www.ebay.com/itm/Silicone-So...se-Samsung-Epic-4G-Touch-Sprint-/190577624793
I would strongly recommend this case because it helps conserve your hardware buttons.
EDIT: I just realized the sale has ended, and I am sure people sell the same exact case. Just look around Ebay and Amazon.
Great alternative to the TPU cases everyone is talking about.
Sent from my Galaxy S II

Can you upload some pix of the case?
Sent from my SPH-D710 using XDA App

Yea I got one from ebay as well for..$5.95 I believe. It's not the best case but it fits like a glove and is raised above the screen and camera to prevent you from setting it down straight on them. It adds a little bit of width but truthfully this is just an In-between until the casemate barely there, and it's a cheap way to protect your phone until then!
Sent from my SPH-D710 using XDA App

Nyckrs said:
Can you upload some pix of the case?
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Yeah man I will when I get a chance. I'm currently on my phone right now lol.
Sent from my Galaxy S II

the description says Anti Dust Silicone Material, do you get any lint/dust on the case? My last silicone case for the Evo4G is a dust magnet, it pretty much picks up all the pocket lint I've in my jeans.
thanks

Silicone can stretch, tear and become loose over time.
TPU does none of those and will always return to the original shape.

akak1997 said:
the description says Anti Dust Silicone Material, do you get any lint/dust on the case? My last silicone case for the Evo4G is a dust magnet, it pretty much picks up all the pocket lint I've in my jeans.
thanks
Click to expand...
Click to collapse
I honestly haven't had any problems, and I have had it in my pocket almost the entire day. No stretching, loose ends, I can't really verify it is anti-dust, because I have had the phone for a day lol. It feels great.
I'm glad I don't have to be paranoid of my phone all of the time now.
Sent from my Galaxy S II

BenKranged said:
Silicone can stretch, tear and become loose over time.
TPU does none of those and will always return to the original shape.
Click to expand...
Click to collapse
How would you know? You don't have the case?
I couldn't rip this case, unless I was literally trying to. And the case makes a "lip" over the screen, in case you want to set it on the table screen first. As far as stretching goes, I paid 8 dollars for an awesome case. If I need to replace it (2 years would be my guess), I will do so.
The great thing about Silicone, is that it looks clean and never gets scratches, looks cheap, and fits great on the phones.
Take my word for it or pay 24.99 at the Sprint store lol. The case didn't even cover the entire outside of my phone, and I broke the kickstands on it almost immediately. Complete garbage.
Sent from my Galaxy S II

Not a very good case... long term
In my experience, silicone cases are a temporary fix at best. I have bought several and always end up replacing them within a few weeks. But for the price, it's probably not a bad temp case until you find the best one for your needs. I ordered a TPU case for $9 and hope to get it today as I just got my phone from letstalk yesterday.

mrpickem said:
In my experience, silicone cases are a temporary fix at best. I have bought several and always end up replacing them within a few weeks. But for the price, it's probably not a bad temp case until you find the best one for your needs. I ordered a TPU case for $9 and hope to get it today as I just got my phone from letstalk yesterday.
Click to expand...
Click to collapse
Cool man let me know how you like it! I was so close to buying one, but they were out of stock.
Sent from my Galaxy S II

akak1997 said:
the description says Anti Dust Silicone Material, do you get any lint/dust on the case? My last silicone case for the Evo4G is a dust magnet, it pretty much picks up all the pocket lint I've in my jeans.
thanks
Click to expand...
Click to collapse
love mine feels like a rearth. dont think it will stretch feels great in the pocket. doesnt stick like others i have had with other phones. but feels great in the hand im in hot weather so i have sweaty hands from time to time. so the tpu get kinds slippery. this gel i like a lot. recommend def till you find what you like a hard case. or like me a case with a kickstand. and i found it for like 5 dollars on ebay or amazon.
remember now its from the accessory geeks on ebay.

Black Bumper for S3 (HQ pics) Recommend!!

Let me start this review just by saying that i love bumper cases. I
have been looking over the internet to find the best bumper case for
our Galaxy s3. I came across this case. Its a STRONG silicone bumper
that completes me in every aspect.
First of all. Its cheap. I think that everyone can try a cheap case
and if they dont like it, they throw it to their dog. (hehehe) Guys,
seriously. this is the best bumper case i have seen over the internet.
Why? It has a nice touch when you are holding your
phone. VERY nice touch. You will want to just hold your phone because
it has a nice feel Second of all: PROTECTION. And i mean it. Front,
back and sides are fully protected.
Front side (screen): the case has a slight bump on the edges so if the
phone drops the floor, its still protected (floor not the road hehe).
Back: Again, the case has a bump on the edges. So if your phone drops
on the back, protected!!! if you want to lay down your phone on a
table: PROTECTED.
Sides: Full protection, which is obvious why: its the case hehe.
Buttons: FULLy accessible button, both power and volume buttons. They
are covered by a soft silicone so there are very easy to press
(compare to the other tpu case i have reviewed)
I dont know if there are more colours available. You must check on
sellers ebay site.
Rating: If this case would be rated its a rock solid 5/5. Believe me
on this. It defenently worths every peny guys. I even compare it with
a TPU bumper case, that i have reviewed last week, amd this is by far
better.
Enjoy the pictures. I tried to take as many as possible.
I will review more bumper cases in the near future so stay tuned.
You can buy this on this link:
http://www.ebay.com/itm/Simple-Blac...620863?pt=PDA_Accessories&hash=item3f1b0aa03f
if you find this review helpful, hit thanks

Nice review! Around the volume rocker it might need a little work but I've already ordered one of these.. 4$ shipped to Canada and it looks decent.
Thanks for the review!

You will like the case mate, i guarantee you that. Feedback when you get it so everyone knows from you too

Good review, I have the white one. Easily the best case.
Owned a casemate brushed aluminum and SGP neo case
Sent from my Nexus 7 using Tapatalk 2

i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app

Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.

I have this case on my phone for a while and feels very steady guys. Note that i am snaping batteries daily, so the case comes on and off (by me i mean) and I havent got a problem so far.

Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Click to expand...
Click to collapse
davpel said:
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
Click to expand...
Click to collapse
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.

Its a single piece mate. Plus you dont lose any signal plus its a snap in snap out plus its veryyy cheap

How does this fit with a zag shield?
Galaxy S3 Paranoid ROM.

I think that with the zagg shield you will be ok. The case has already a tight fit so its better not to use extra protection underneeth. I dont think you need zagf shield for the back cover because its already protected from the case.

ponyboy82 said:
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Click to expand...
Click to collapse
If it is anything like the one for the Galaxy Nexus (and it appears to be the same), there is a hard plastic material used on the rear portions of the bumper, while the piece which surrounds the screen is flexible rubber. With the GN, the two materials separated.

is it easy to take it in and out of your pant pocket

denny_1986 said:
is it easy to take it in and out of your pant pocket
Click to expand...
Click to collapse
yes its very easy dont worry.

Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity

PaulQ602 said:
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
Click to expand...
Click to collapse
i dont know for sure, but i think that it is going to work because the case is thin on the bottom. :good:

Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.

Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.

rlatjs17 said:
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
Click to expand...
Click to collapse
if your phone hits a straight floor, then its protected. if ur phone hits the road it might be scratched. try to avoid the roads hahahaha :laugh:

dunderball said:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Click to expand...
Click to collapse
i got mine in less than 3 weeks becuase the seller shipped the case in an envelope (like a mail). for three bucks its a bargain.

HHI Clear flexible TPU case for $.99

So, I went on a limb and ordered this:
http://www.handhelditems.com/matte-back-clear-flexible-case-p-201349.html
I would say I hope I don't regret it, but it was $.99 + about $3 for shipping. It hasn't shipped yet, but they provided a tracking number last night.
It's clear, has a cutout for the power button it appears, and I hope it works well. Just worried about it stretching out like the silicone on my current phone did. I'm not that familiar with TPU, so hoping that's not an issue.
Edit: I just got this case. It shipped in about 5 days by ups. It very thin but also makes me unsure if it'll absorb any impact at all. The first thing I noticed I think back is frosted, not completely clear. It's also not curved, but flat all around. I'm curious how well this will fit. The frosted back has a subtle texture to I as well, make it comfortable to hold and not slippery. The power button and all ports are exposed, only the volume buttons are covered and they feel stiff.

gk1984 said:
Just worried about it stretching out like the silicone on my current phone did. I'm not that familiar with TPU, so hoping that's not an issue.
Click to expand...
Click to collapse
The TPU case on my Galaxy S Captivate is still fine after almost 3 years. No stretching whatsoever. I don't take it on/off often though, so that may shorten the life. It is certainly not like the silicone I have seen on other cases (specifically a GS3 Defender case that a friend has) which is very loose and has already been replaced once or even twice.

Dazrin said:
The TPU case on my Galaxy S Captivate is still fine after almost 3 years. No stretching whatsoever. I don't take it on/off often though, so that may shorten the life. It is certainly not like the silicone I have seen on other cases (specifically a GS3 Defender case that a friend has) which is very loose and has already been replaced once or even twice.
Click to expand...
Click to collapse
This is encouraging. Could be a dollar well spent.

It's definitely not a bad purchase for $1. The only thing you need to be aware of with TPU cases like that is they retain heat, which can be really crappy if you're doing some hardcore gaming or have the phone sitting on your dash. As far as protection goes, my requirement is that the case has a lip that comes out a bit from the face of the phone. That way if I drop it face down my screen (hopefully) won't get scratched.

Does anyone know if AT&T stores have any HTC One cases / screen protectors yet.
OP - thanks for the case link. I picked one up also.

Now they gave me $1 store credit. I bought this case and only paid shipping if I decide to spend my 1 on something else.
Sent from my Evo 3D CDMA using xda app-developers app

gk1984 said:
Now they gave me $1 store credit. I bought this case and only paid shipping if I decide to spend my 1 on something else.
Sent from my Evo 3D CDMA using xda app-developers app
Click to expand...
Click to collapse
Damn...you could have bought mine...LOL.

iFalcon said:
Damn...you could have bought mine...LOL.
Click to expand...
Click to collapse
Well... I'm not saying yes, but I looked at the rest of their accessories and don't want/need anything else...

gk1984 said:
Well... I'm not saying yes, but I looked at the rest of their accessories and don't want/need anything else...
Click to expand...
Click to collapse
Agree completely...nothing else interests me.

This case came today, but I won't have time for a day or more to show it off or describe it.
But I did want to let everyone know I isn't completely clear. The back I will frosted clear. This is misleading from their page. We'll see how I looks when I get the phone.
Sent from my Evo 3D CDMA using xda app-developers app

I haven't been using this case much because I preferred my Speck clear case - well, the rubber/silicone trim around the volume buttons and usb port are streatching badly... so I put this $1 tpu case on instead finally. Dropped my phone on the asphalt last night from just below my shoulders. Phone landed on a corner and did a few flips. No damage what-so-ever. Not even a dent on a corner. Also have a Rhino Shield MK II on too, so if there would have been any screen damage, the shield did it's job well too.

Aluminum Bumper Mini-Review

Got my silver aluminum bumper from AliExpress today and it looks great for the price. When I came back from lunch with my boss, this thing was waiting for me in my mail box. It was extremely well packaged from China and you can tell the package was beat up in it's week's journey. Shipping to me in TX from China only took a week and that is extremely fast for me. I was expecting a two week delivery time.
To the case: To quell any questions on call quality; I have placed one call with the bumper on since I installed it. And it works. No noticeable drops that I can initially tell. I'll update if anything changes.
My bumper came with a generic N5 screen protector, which I will not use, because I already have a spigen one installed. I proceeded in taking the included bag which had a philips type of screw driver and upon further inspection, the bag also have a few spare screws, which is always welcomed IMO.
I removed my tpu bumper and slapped this one on immediately. I first came across the bumper looking like it may not fit due to my dbrand cf skin. Being a bit thick, I was a bit worried. But with a little more wrapping the case closer to the outer bezel, the screw openings aligned up better than before. The reason is because of the little foam pads on the interior. Once you work it down a bit, you should be able to screw in the teeeny tiny screws with the included screwdriver.
Will it work on my orb charger? Yes! It holds up as I thought it would.
Does the little screw tab that reminds me of Florida really bad looking? No, when looking at the phone at its entirety, I honestly can say, I like it.
Does it protect the back camera? Uhhhh that's a no. There are ridges on the bottom of the micro USB port and where the headphone port is, but it is not enough to keep the camera lens to sit on the table. This will detract quite a few people. But keep in mind, this is a MINIMALIST case, not a Seidio or Otterbox or whatever bomb proof case that's out there now lol. All the openings are nice and big, except for the headphone port. If you have anything like a Shure E215 plug, you will need to use an adapter to extend the port or use another headset/headphone all together. Another issue, I kinda dislike is the opening for the power button. You have to really search for the button because of it being a cut out compared to buttons on top. I just got to get used to that feeling.
However saying that, I am 100% comfortable placing my phone flat down because I have a dbrand carbon fiber skin on my Nexus 5 backside.
Another bonus is that this aluminum bumper fits in my Seidio Dilex Holster for the Nexus 5 without any issue. The little tab on the bottom plays nice and I am one happy camper. :highfive:
Do I recommend this? For now I say yes aesthetic wise. Everything seems to work thus far so I really don't have anything too bad to say about it.
Pros:
It's thin
Aluminum color is sleek and sexy with my cf white dbrands skin
Ok with wireless charging orb (will test out Tylt Vu later on as well as the Nexus Wireless charger in my truck)
Cons:
It's thin
This bumper will not protect the camera lens when laying it on it's backside.
The lil "Florida" tab where the screws are. Even though not a dealbreaker for me, it's still a slight 'con' in my book.
Pics below. Please let me know if you have any questions. I'll field them if I am not working

Thanks for the review, I will probably buy one. Does it seem like the metal would be able to scratch the screen where or makes contact?
Sent from my Nexus 5 using Tapatalk

Does it actually feel like metal?
I feel like getting silver or blue.
Sent from my Nexus 5 using xda app-developers app

Thanks for the thorough review and photos! I am thinking about getting this as well.
Have you used it on the Nexus Wireless Charger yet? I currently have a TPU case but just bought the new charger but noticed the case was too thick for the magnets so I'm looking at getting a bumper like this.

wow that looks awesome

Could you take a photo of the hole for the headphone jack when the case is on the Nexus 5 or measure the diameter of the hole?

GavinMazey said:
Thanks for the review, I will probably buy one. Does it seem like the metal would be able to scratch the screen where or makes contact?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
No it doesn't seem to scratch or do anything to the screen. I have a Spigen protector on it and the bumper did not peel it up. I was more worried about the dbrand backing.
honeybunchie said:
Does it actually feel like metal?
I feel like getting silver or blue.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
It feels like...aluminum. It does not feel like plastic to me anyways.
youngjediboy said:
Thanks for the thorough review and photos! I am thinking about getting this as well.
Have you used it on the Nexus Wireless Charger yet? I currently have a TPU case but just bought the new charger but noticed the case was too thick for the magnets so I'm looking at getting a bumper like this.
Click to expand...
Click to collapse
Yes I have used the Nexus wireless charger. I have it installed in my truck in conjunction of a Kenu Airframe that mounts to the vents. It clears Kenu Airframe so that the magnets can catch without much issue. And bumpy Texas roads and highways are no match thus far. But don't go off roading lol.
kaboose786 said:
wow that looks awesome
Click to expand...
Click to collapse
Thanks!
[Headcrash] said:
Could you take a photo of the hole for the headphone jack when the case is on the Nexus 5 or measure the diameter of the hole?
Click to expand...
Click to collapse
Not too good with measurements with that size, I'll try lol. To me and my ruler, it looks like 6mm? I'll attach a pic.

Reporting on a half day of full use of the Aluminum bumper. I really do like the look of it and fits in my Seidio Dilex holster securely. However, I have to report in that if one has a dbrands back like me, I have a white carbon fiber back, it may bubble up a bit depending on how you put on your back and if you used a blow dryer on the edges like dbrand suggested. I did do that, but I did find a slight bubble/rise on the corner where the screws go in. Also, you can see that the bumper does not fully wrap around like a tpu would because, this is really not that flexible. I'll post some pics and hopefully you can see what my OCD eyes can see. As for the lil bubble, I'll need to do a follow up blow dryer event when I go home for lunch and see if that makes it go away or not. Not really all concerned with the bubble, I can hardly see it and I can learn to live with it if it doesn't go away lol.

looks great!! but in the back is a bit to thin imho

ava1191 said:
looks great!! but in the back is a bit to thin imho
Click to expand...
Click to collapse
I agree, but I am ok with it. I mean if it was naked it would have the same issue. However the dbrand back is protecting it from scratches so I am ok with that.Drop protection, I don't know, even though the box does mention drop protection on corners lol.

Can you comment on your cellular connection with it on.
Have you done any speed tests with and without it.
I mentioned in another thread that I had one on an iPhone and it did not do well, but the iPhone antenna is around the device, different than the Nex 5.

OnYourKnees said:
Can you comment on your cellular connection with it on.
Have you done any speed tests with and without it.
I mentioned in another thread that I had one on an iPhone and it did not do well, but the iPhone antenna is around the device, different than the Nex 5.
Click to expand...
Click to collapse
No I haven't done speedtests on it. But I am getting full bars LTE right outside my office, which is pretty much on par with what I normally get. I have to admit, I do think it affects the antenna slightly, but not to the point of dropped calls. However, I do not have anything to back up this theory.
I'll report back later on to see if my wife said she called me and I didn't answer or what have you.

can you do a signal test w/o case and w/ case?
(Settings, About Phone, Status, Signal strength)
Thanks!!

khanh1289 said:
can you do a signal test w/o case and w/ case?
(Settings, About Phone, Status, Signal strength)
Thanks!!
Click to expand...
Click to collapse
Because you asked and I don't feel like working on my next project right now lol...
Without the bumper on, the phone went to lowest LTE at -112dBm
With bumper on, the phone went to H and jumps here and there, but didn't stick and settled on 3g (or UMTS) at -101dBm.
So my initial feelings are correct that it does hinder reception but I am still connected. Well in the office anyway. But I used my phone at lunch with co workers without issue. I was getting emails and notifications while I was out.

unfortunately, I barely get signal in my office so I can't really get this :/ I wish there was a good looking bumper that has same look/feel as this one but made of a different material that would not jeopardize the signal quality.

khanh1289 said:
unfortunately, I barely get signal in my office so I can't really get this :/ I wish there was a good looking bumper that has same look/feel as this one but made of a different material that would not jeopardize the signal quality.
Click to expand...
Click to collapse
Sorry man. I wish I had better news. But I will continue to use the bumper for myself until something happens or if I get fed up with it for whatever reason.

Ohhh looks good!! Link please!!
Sent from my Franco'd Nexus 5

That looks extremely sexy. Also looks like it wouldnt offer to much protection.
Sent from my Nexus 5

hello
thank for your time .who do this case.or do you have the link to the case?

reeco said:
Ohhh looks good!! Link please!!
Sent from my Franco'd Nexus 5
Click to expand...
Click to collapse
http://www.aliexpress.com/item/New-...-protective-sleeve-for-Google/1566805230.html
ibramadhan said:
That looks extremely sexy. Also looks like it wouldnt offer to much protection.
Sent from my Nexus 5
Click to expand...
Click to collapse
No not so much, but after my first Seidio Holster broke, I have been running it naked and got used to its slim design. This was minimal bulk that still showed off the back dbrand skin goodness and also helps with any corner bumps. Which I have to say it did do its job the other day when I knocked it off my charger in my truck.
josedecuba said:
thank for your time .who do this case.or do you have the link to the case?
Click to expand...
Click to collapse
http://www.aliexpress.com/item/New-...-protective-sleeve-for-Google/1566805230.html
I have to add, which I didn't in the OP, is that I did add a bit more for a tracking number. I think the extra shipping cost less than 3 bucks.