Bricked GIO "setupConnetion" - Samsung Galaxy Gio GT-S5660

So I rooted the device and for some reason recovery didn't work anymore. So I tried flashing a new one which didn't work because of Odin getting stuck at setup connection. Now I get a phone, a triangle and computer. It seems I can get the phone into download mode but it will still give me the same error message.
I have tried with 2 computers, different versions of odin as well as different cables. Samsung drivers have been installed on both computers, kies is not installed.
Any ideas how to unbrick?

Had wrong version of Odin. 4.42 needs to be used.

Related

Stuck recovery

I was preparing to flash the stock EC05 rom with odin and did a full wipe of everything. But it seems I can't get odin to recognize the phone is plugged in (I can get to download mode, but it never shows up in Odin).
Not I'm stuck in recovery with no backup, and can't do anything.
I also can't get windows7 or adb to recognize the device.
I have the drivers I used when rooting the phone, and they don't seem to work.
Windows says "usb device not reconized... the device has malfunctioned" etc.
I have tried many cables and many computers, and nothing seems to work.
My last resort is to buy yet another cable, one recommended in another thread, but I have already bought a few cables designed for this phone, blackberry, and one just for data.
Is there anything I could flash from recovery to at least allow me to boot?
Souzhi said:
I was preparing to flash the stock EC05 rom with odin and did a full wipe of everything. But it seems I can't get odin to recognize the phone is plugged in (I can get to download mode, but it never shows up in Odin).
Not I'm stuck in recovery with no backup, and can't do anything.
I also can't get windows7 or adb to recognize the device.
I have the drivers I used when rooting the phone, and they don't seem to work.
Windows says "usb device not reconized... the device has malfunctioned" etc.
I have tried many cables and many computers, and nothing seems to work.
My last resort is to buy yet another cable, one recommended in another thread, but I have already bought a few cables designed for this phone, blackberry, and one just for data.
Is there anything I could flash from recovery to at least allow me to boot?
Click to expand...
Click to collapse
Have you tried downloading the drivers fresh from Samsung? How about different USB ports? Sounds like bad drivers though. The first time I used Odin, Windows used the drivers I installed plus got some others from Windows update. Took about 10 minutes for it to find my phone.
Which version of Clockwork are you on? If not stock you can go here and flash the EC05 stock ROMS:
http://forum.xda-developers.com/showthread.php?t=1027904
Classic sign of bad drivers or a bad cable. Don't waste your time on the stock cable - get another, and plug it into a different port. Reinstall the drivers if you need to.

[Q] Odin flash doesn't work

Hi, I have an N7105 running android 4.2.2 latest version in my country. Recently, my phone got semi bricked, not sure why, and wouldn't get past the logo. I flashed the stock rom (N7105XXUFNJ1_N7105OLBFNJ1_MM1) for the first time via ODIN 3.07 and ODIN failed. However, I still manage to get into download mode. So i decided to update the samusng mobile phone drivers via kies, used a different USB port and charged the battery for awhile before trying again. I flashed the same firmware with the same ODIN version (3.07) and unfortunately, it failed again. As in it didn't even managed to inject the system successfully. Now, I have a bricked device that neither will boot into download/recovery mode. May I know what's the cause of the issue? Is there any way to revive it? Thanks so much.

stuck in a boot loop

my galaxy note 2 phone got stuck in a boot loop and i wanted to flash a new stock rom for it
the problem is that no matter what i do odin won't be able to recognize my device even at download mode
i've tried reinstalling samsung usb drivers, running odin as admin, trying older versions of odin, trying different usb cables
nothing worked
before soft break the phone had a stock rom on it and was not rooted
USB DEBUGGING WAS NOT ENABLED
if i've missed anything or doing anything wrong please help
try different PC or Odin version, for me only 3.09 worked for the first time
try odin and download the right file for odin

odin

Trying to flash different recoveries with different versions of Odin but it keeps getting stuck. Get stuck on setup connection and also stuck on sbl2. I have uninstalled and reinstalled kies. I have also deleted drivers and reinstall them. Nothing is working. Anyone know a good Odin version to use? Maybe that's the culprit
Twrp 3.0.1 is best. Used Odin 3.09. Had to go buy a new USB cord. Data capable.

Boot loop after SD card problem - can't reinstall stock firmware

Turning to this forum in desperation after many failed attempts to use Odin to reinstall the stock firmware for my SM-T830.
Like others, my previously perfectly-functioning Galaxy Tab S4 got stuck in a boot loop after attempting to move apps to the microSD card. Unlike many others, I have never tried to root the tablet or do anything with TWRP, custom firmware and the like.
I have got the tablet into download mode and tried using various versions of Odin to attempt to reinstall the stock firmware files (BL, AP and CSC successfully downloaded by Frija - no CP file exists for this device), but Odin always gets stuck at the "SetupConnection" stage and then eventually fails with a "Complete(Write) operation failed" error. Possibly an FRP lock issue?
I've tried several different USB cables for this. Any help appreciated.
Hi, did you find a solution to this?
Have you installed the Samsung USB drivers?
simmo1221 said:
Hi, did you find a solution to this?
Have you installed the Samsung USB drivers?
Click to expand...
Click to collapse
Nope, no solution yet. Yes I had the drivers installed and the tablet was showing up fine in Odin.
I've taken it into a shop to see if they can fix it.

Categories

Resources