Develop Bugs

how to install stock recovery img

hi guys
i have installed custom rom and then again installed stock rom
now i can see ACE PVT SHIP S-ON in bootloader first line
i am permrooted using visionary and installed rom manager
and also radio s-on
i have a fota update
but i am unable to update because i still have clockwork mod recovery
if i press recovery in bootloader then clockworkmod recovery will be opened
how to go to stock recovery i,e a picture of cellphone and a red traingle
i think update will only work only if there is stock recovery
i have tried many ways but i have not succeded
like
---------------
adb shell
su (if you get permission denied, you have to do Visionary temproot)
getprop ro.cid (this will tell you your stock CID, we will use that later, so write it down. It has eight digits.)
busybox dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p21 (it will replace clockworkmod with original recovery)
sync (wait 10 secs after that, then you can close the adb shell window)
i see 7490+files in
7490+files out
and i type sync and wait for 1 min but no use
------------------
from terminal emulator
su
flash_image recovery recovery.img
i see "flash_image" not found
------------------
i have used fastboot method
downloaded fastboot.zip and extracted
and placed recovery.img in extracted folder and in run cmd as admin
and type c:\fastboot
flash recovery recovery.img
but i got fastboot.exe is not valid win32 application
---------------------
please guide me
thank u

Try this link, it might prove to be useful, especially the link by dr.m0x he has outlined some steps, I found it useful for myself. You will find the post at the end of the thread.
How to completely remove clockwork

Tried as said by.Dr.m0xd but I am getting an error "fastboot.exe is not a valid win32 application" I am using win 7 64bit home premium
Please some.one guide me
Thank-you0

Pls some one help me

karthik_vit07 said:
Pls some one help me
Click to expand...
Click to collapse
I assume you have the SDK installed.
From where you downloaded the fastboot.exe, Download it from http://developer.htc.com/adp.html
It is working fine for me on the same setup...copy the file on to the tools folder in the SDK...

Fastboot will not work because you have SHIP bootloader.
Busybox DD does not work because you do not have S-OFF. So get Radio S-OFF, reboot, replace the recovery using that dd command and then go back to S-ON.

[Q] How to flash an hboot with fastboot/adb

Clockworkmod recovery doesn't work(only get a blank screen after I make my selection), and my phone wont boot. I'm trying to flash a rom via fastboot or adb.
I installed fastboot and adb using this guide:
fastboot adb guide
I downloaded htc sync to install the drivers.
I'm trying to follow this guide for flashing a new rom
xda flashing guide
when i try "fastboot -w" the command prompt returns "erasing 'userdata'... FAILED <remote: not allowed>"
it seems the sollution for this is posted here. but i don't know how to flash an hboot. Can anyone point me in the right direction? I've been searching and all i could find was fastboot commander, but when I try to flash a new Hboot or my recovery image it returns "flash FAILURE"

sombomb said:
Clockworkmod recovery doesn't work(only get a blank screen after I make my selection), and my phone wont boot. I'm trying to flash a rom via fastboot or adb.
I installed fastboot and adb using this guide:
fastboot adb guide
I downloaded htc sync to install the drivers.
I'm trying to follow this guide for flashing a new rom
xda flashing guide
when i try "fastboot -w" the command prompt returns "erasing 'userdata'... FAILED <remote: not allowed>"
it seems the sollution for this is posted here. but i don't know how to flash an hboot. Can anyone point me in the right direction? I've been searching and all i could find was fastboot commander, but when I try to flash a new Hboot or my recovery image it returns "flash FAILURE"
Click to expand...
Click to collapse
In clockwork use the trackball to select items, not the power button.
To use most fastboot commands you need an unlocked bootloader, or the engineering bootloader. To chanhe your bootloader you need to be s-off, or do an entire ruu.

cmlusco said:
In clockwork use the trackball to select items, not the power button.
To use most fastboot commands you need an unlocked bootloader, or the engineering bootloader. To chanhe your bootloader you need to be s-off, or do an entire ruu.
Click to expand...
Click to collapse
Wasn't using the trackball. This is embarrassing. Thanks for all the helpful info, you're awesome.

=X
wow this is funny, but sadly it helped me also

In case you'd still like to know how to do it via fastboot, here are some steps:
Place the .zip in the same directory as the adb and fastboot executables
Double check the md5 of the .zip before proceeding to prevent bricking the device
Run the following commands in command prompt:
fastboot devices //Verify that the device is detected
fastboot erase cache //Not sure if this is completely necessary, but the guide I followed included it as a step
fastboot oem rebootRUU //Boot into RUU, which lets you flash HBOOT, radio, etc.
fastboot flash zip [zipname.zip] //Replace zipname.zip with the actual name of the file you are flashing
fastboot reboot-bootloader //The guide I pulled this info from didn't specifically say that you should reboot to bootloader rather than to Android, but I have seen others mention that you should always reboot to the bootloader first after flashing an HBOOT or radio. I would do this just in case

thehiggins you saved the day

Thanks You
Didn't know I had to be in RUU. When do I need to be in RUU, when flashing the boot or any boot related img/zip ?

Help a Newbie to rid GPE RUU

Hi folks
I have recently bought a HTC One M8 on ebay which was converted to play edition by the seller using GPE RUU. I know very little about this but would like to attempt to return to stock whilst ensuring no flagged messages are left on.
I have searched and only come across guides that are specific to specific circumstances. Does anyone have or know of a general and safe guide that would work in my case?
Any help greatly appreciated.
Thanks in Advance
Sid

Do you have any idea what version the phone was running before GPe? Can you see the model number at the bottom of the back of the phone?

EddyOS said:
Do you have any idea what version the phone was running before GPe? Can you see the model number at the bottom of the back of the phone?
Click to expand...
Click to collapse
model: OP6B100
No idea what it was running before.

OK, going by that ID we can assume it's an EU unbranded handset. Or we can at least we can treat it as such. So, assuming you want to go back to 100% stock Sense (but keep S-OFF) do the following:
First, download the following to your fastboot folder:
4.16.401.10 RUU ZIP - https://drive.google.com/file/d/0B17smFr95pleU2NqcVB3NWxoNnM/view (rename it ruu.zip - not ruu.zip.zip)
htc_fastboot.exe - https://www.androidfilehost.com/?fid=95897840722646249
1.54.401.5 FW ZIP - http://www.androidfilehost.com/?fid=23329332407589439 (rename it firmware.zip)
TWRP - http://techerrata.com/file/twrp2/m8/openrecovery-twrp-2.8.4.0-m8.img (rename it to recovery.img)
HTC Sync Manager (for the drivers) - http://www.htc.com/uk/support/software/htc-sync-manager.aspx (install it and then uninstall Sync Manager but leave the drivers)
1. First things first, change the CID to Super CID - fastboot oem writecid 11111111
2. Once done, reboot the bootloader to confirm it's showing the Super CID - fastboot reboot-bootloader
3. Once confirmed it's set, we now need to set the right MID in case this was changed by the seller. To do this, we can use TWRP. Flash TWRP (downloaded earlier) - fastboot flash recovery recovery.img
4. Once flashed, boot into TWRP and connect the phone to your PC
5. Once the drivers are installed, make sure the PC sees the phone by typing adb devices
6. So long as it's been shown as a connected device, type adb shell
7. We can now change the MID to the EU unbranded one by using the following command (copy/paste this as it has to be exact)
Code:
echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x31\x00\x30\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384
8. Once done, we can now 'lock' the bootloader using the following command (whilst still in adb shell)
Code:
echo -ne '\x00\x00\x00\x00' | dd of=/dev/block/mmcblk0p2 bs=1 seek=33796
9. And we can also reset the tamper flag at the same time
Code:
echo -ne '\x00' | dd of=/dev/block/mmcblk0p6 bs=1 seek=5314564
10. Once all that is done, type exit to leave adb shell and then reboot the phone into the bootloader through the reboot menu in TWRP
11. Once back at the bootloader, you should find the phone is now 'LOCKED' and it shouldn't say 'TAMPERED' at the top either but should still have the black bootloader interface that the GPe has. We can now set it all back to Sense
12. Reboot the phone into RUU mode - fastboot oem rebootRUU
13. Once in RUU mode, flash the firmware ZIP - fastboot flash zip firmware.zip
14. The process will fail the first time and reboot. Run the same command again once it's rebooted - fastboot flash zip firmware.zip
15. Once finished, reboot the phone to the bootloader to confirm you now have the white 'Sense' bootloader - fastboot reboot-bootloader
16. Assuming it's correctly flashed, reboot back into RUU mode - fastboot oem rebootRUU
17. We can now flash the RUU using the htc_fastboot package - htc_fastboot flash zip ruu.zip
18. Once finished, reboot back to the bootloader one last time - fastboot reboot-bootloader
19. Once back in the bootloader, change the CID to HTC__001 - fastboot oem writecid HTC__001
20. Reboot the bootloader to confirm the change has been successful - fastboot reboot-bootloader
21. Once back at the boot loader, disconnect the phone and boot into recovery and do a factory reset
22. Once the reset finishes, reboot the phone
That should get it all working but any issues obviously let us know

Fastboot folder? I did say i was a newbie! thanks

OK, perhaps it might be worth reading up on fastboot/adb before doing anything as the above isn't for the faint-hearted!
EDIT: I've attached my 'fastboot' folder. Extract it to the root of your C: drive so it's easy to get to. All the commands in my guide are done through a command prompt in Windows starting in that folder, e.g. C:\platform-tools\fastboot oem rebootRUU
https://drive.google.com/file/d/0B8L4pkbzdlR3Z3dsNGZfSWhCeTA/view

ok, I have installed fastboot adb andi have a folder called adb in my c:. I am now downloading all the items listed above and renaming as appropriate and moving to the folder named adb. am I on the right track?

Getting there. You could've just downloaded/extracted the folder I linked to on your C: drive but as long as the contents is somewhere you can easily find you should be OK

i have the same problem but mine is in a loop.... my htc m8 is an 0P6B700, ive tried to convert it to a lollipop GOOGL001 but it didnt work... and i am stuck in bootloader.... i have already installed the twrp 2.8... and i have the working the fastboot in my pc... but i dont know what to do....
i want to install a lollipop rom.. but its ok if i need back to stock.
Any help will be appreciated
thanks.

tonytdc1000 said:
i have the same problem but mine is in a loop.... my htc m8 is an 0P6B700, ive tried to convert it to a lollipop GOOGL001 but it didnt work... and i am stuck in bootloader.... i have already installed the twrp 2.8... and i have the working the fastboot in my pc... but i dont know what to do....
i want to install a lollipop rom.. but its ok if i need back to stock.
Any help will be appreciated
thanks.
Click to expand...
Click to collapse
Please start your own thread rather than hijacking someone else's, and also post your output from fastboot getvar all so we can work out what's best to get you back up and running

I know your getting help here, but...Can I ask..
When you bought the One M8 on eBay, did the ad or photos say you were buying an M8 unlocked and Converted from Sense to GPE.
If Not, you do know youve been sold an incorrect product and you have a case against the seller for false advertising, so save yoursewlf the issues, exersize your rights and send it back.
Plus, you say you are new to flashing / unlocking, so if you brick this M8, you dont have any returns room.
Just wanted to say that and hope it helps. Good Luck

EddyOS said:
Please start your own thread rather than hijacking someone else's, and also post your output from fastboot getvar all so we can work out what's best to get you back up and running
Click to expand...
Click to collapse
Ok i will... thanks

EddyOS said:
Getting there. You could've just downloaded/extracted the folder I linked to on your C: drive but as long as the contents is somewhere you can easily find you should be OK
Click to expand...
Click to collapse
Hi Eddy
Thanks for all your support, i have successfuly completed step 1, 2 and 3. Now I need some assistance in flashing TWRP. How do i do this and what do i use?
regards

3 was flashing TWRP so if you've done that you now enter recovery via the bootloader.

Need bootloader partition dump

I hard bricked my device few days back with custom rom installed somehow I recovered using blank flash but the problem is that now the bootloader is locked with custom rom i cannot boot into the system neither i can flash stock rom.(preflash validation failed)
I think i can get through this if i flash unlocked bootloader ie. aboot partition from another device.
So i request if some one can provide me with the dump to resolve this issue. I need oreo bootloader C1.81 version or above
Just run this command on terminal emulator or adb shell
dd if=/dev/block/bootdevice/by-name/aboot of=/sdcard/aboot.img
dd if=/dev/block/bootdevice/by-name/abootbak of=/sdcard/abootbak.img

ronyroy said:
I hard bricked my device few days back with custom rom installed somehow I recovered using blank flash but the problem is that now the bootloader is locked with custom rom i cannot boot into the system neither i can flash stock rom.(preflash validation failed)
I think i can get through this if i flash unlocked bootloader ie. aboot partition from another device.
So i request if some one can provide me with the dump to resolve this issue. I need oreo bootloader C1.81 version or above
Just run this command on terminal emulator or adb shell
dd if=/dev/block/bootdevice/by-name/aboot of=/sdcard/aboot.img
dd if=/dev/block/bootdevice/by-name/abootbak of=/sdcard/abootbak.img
Click to expand...
Click to collapse
What is your model no of device

Bootloader version is MBm-2.1-albus_retail-b625135-190911

XT1955-5 bootloader unlock install TWRP & Root with Magisk

So when I got this device I went to root it and found there's not very good documentation on what to do to get root and recovery installed so after many boot loops and reinstall of firmware here is what I did to gain root and TWRP and have a stable environment. You will need to use ADB & Fastboot commands please install either this : https://forum.xda-developers.com/showthread.php?t=2317790 or https://forum.xda-developers.com/showthread.php?t=2588979 or you can install from here: https://developer.android.com/studio/releases/platform-tools. you will also need the Motorola drivers located here: https://support.motorola.com/us/en/solution/MS88481. Once you have obtained these you can proceed with the bootloader unlock. I have the unlocked version of the Motorola G7 Power so I was able to fallow the sets here: https://support.motorola.com/us/en/bootloader/unlockyourdeviceb. If you have a different variant I'm not sure if your able to unlock your bootloader please try and let me know in this thread. I AM NOT RESPONSIBLE IF YOU SCREW YOUR DEVICE UP OR FOR ANY DAMAGE TO YOUR DEVICE
Bootloader unlock steps:
1. On your device go to Settings and to System, Then About phone and click " Build Number " until you unlock developer options.
2. Back out one step and click the Advanced tab and then click " Developer Options ".
3. Once in developer options " OEM Unlocking " turn off " Automatic Updates " and enable "USB Debugging".
4. Once you have done USB Debugging open the start button type "CMD" and open a command prompt.
5. Once in command prompt type " adb devices " make sure you authorize the pc on the phone. then type in command prompt " adb reboot bootloader "
6. Once in bootloader type in command prompt " fastboot oem get_unlock_data " from here fallow the directions on the Motorola Bootloader Unlocking page: https://support.motorola.com/us/en/bootloader/unlockyourdevice
7. Take the number given to you by Motorola and type in command prompt " fastboot oem unlock CODE FROM MOTO " then enter the same command again and your device will be bootloader unlocked.
TWRP & Magisk install:
This is where I found it to be difficult to get things right either I would bootloop or I wouldn't be able to unencrypt my sd card in TWRP so I couldn't read things right all sorts of dumb issues. All the files I used are attached so please let me know if this works as well as it did for me. Please download the TWRP .img file it was too large to attach: https://dl.twrp.me/ocean/ Also make sure that your command prompt is in the directory of your stored files.
Here are a list of commands to get TWRP and install Root please be in bootloader mode to start this process.
1. fastboot boot twrp-3.3.1-2-ocean.img
2. In TWRP go to the wipe option and select the format and type " yes " once it has done that go back to the main TWRP page by hitting the home bottom and select Reboot and select Reboot Bootloader.
3. fastboot boot twrp-3.3.1-2-ocean.img
4. Once in TWRP adb push twrp-installer-3.3.1-2-ocean.zip /tmp/ then click install and navigate to the /tmp folder and install the TWRP .zip file
5. After you install TWRP do this : adb push Magisk-v20.1(20100).zip /tmp/ then navigate to your /tmp folder and install Magisk .zip file
6. After you install magisk you can reboot the system and let it sit it might loop once or twice but it will boot. I did the force encrypt disable with the attached zip file then i rebooted.
Also I found it best to do this with a fresh installed firmware that hasn't been booted yet I downloaded the firmware/ROM from here: https://mirrors.lolinet.com/firmware/moto/ocean/official/RETUS/ here is a list of commands to copy and paste into command prompt please make sure your device is in bootloader/ fastboot mode.
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear

Well i messed it up some how. my phone would boot loop three times and then go back to the twrp screen. after 30 minutes of messing with it i gave up and factory reset it via the adb platform tools.

Got it to work but had to start fresh as said at very bottom using retus version, I did all that then step by step but i booted once just to enable usb debugging of course, already had oem unlock but then right back into recovery flashed magisk and disable dm verity both back to back before reboot and all went fine cant get ota ofc but surely better roms will start showing up soon and I wont give a crap about stock anymore.
---------- Post added at 08:30 PM ---------- Previous post was at 08:29 PM ----------
toxinburn said:
Got it to work but had to start fresh as said at very bottom using retus version, I did all that then step by step but i booted once just to enable usb debugging of course, already had oem unlock but then right back into recovery flashed magisk and disable dm verity both back to back before reboot and all went fine cant get ota ofc but surely better roms will start showing up soon and I wont give a crap about stock anymore.
Click to expand...
Click to collapse
I am gonna check one thing I had it all working another method before but after installing something thru magisk it soft bricked I think it was vanced youtube maybe also cant seem to find a way to get vipre to work sadly.

Question
Does this method bypass the screen lock password on the phone? I have this phone that is locked with a passcode, so I can't easily get it into developer mode. Sorry, I'm a total newbie to this but am trying to learn. Thanks in advance!

A tip for linux users. If you are getting "< waiting for any device >" after the "fastboot oem get_unlock_data". Ctrl-c to exit the command. Su to root and then "fastboot oem get_unlock_data".

I give up, SIM stopped working after multiple failed attempts at installing Custom ROMs, even so much as installing Magisk+force encrypt disable brings up Factory data reset screen. Now my SIM doesn't even work on another stock phone for some reason, since the ban that apparently exists, if applied, should be IMEI-only, and somehow it works on a Custom ROM+Magisk device of mine. Going back to stock with locked bootloader I guess
SIM stopped working on G7 Power = neither SIM from two different carriers, one that's never been on a rooted/unlocked bootloader phone, don't even show up as a grey signal icon, tried both slots.
My SIM not working on another stock phone (G7 Play) = not recognized at all, but at least it recognizes there's a SIM card in there, grey signal.
Working fine on G5 with Magisk, Xposed and OmniROM
So maybe I banned both the chip (?) and IMEI, but still for some reason it works on another bootloader unlocked phone

Hyoretsu said:
I give up, SIM stopped working after multiple failed attempts at installing Custom ROMs, even so much as installing Magisk+force encrypt disable brings up Factory data reset screen. Now my SIM doesn't even work on another stock phone for some reason, since the ban that apparently exists, if applied, should be IMEI-only, and somehow it works on a Custom ROM+Magisk device of mine. Going back to stock with locked bootloader I guess
SIM stopped working on G7 Power = neither SIM from two different carriers, one that's never been on a rooted/unlocked bootloader phone, don't even show up as a grey signal icon, tried both slots.
My SIM not working on another stock phone (G7 Play) = not recognized at all, but at least it recognizes there's a SIM card in there, grey signal.
Working fine on G5 with Magisk, Xposed and OmniROM
So maybe I banned both the chip (?) and IMEI, but still for some reason it works on another bootloader unlocked phone
Click to expand...
Click to collapse
From what I've been able to tell, the SIM cards are locked via IMEI (from MetroPCS I assume?, cause that's what they do), and will appear invalid, but should show the phone number in the settings. It should also say out of service, unless inserted into the phone that it originally belonged to.
I have an E5 Play, and unlocked it using the device unlock app built-in from MetroPCS, after 3 months of service (maybe 6 I forget). After that, I could throw in other SIMs. But the phones those SIMs would come out of, they couldn't read the metro card. They said invalid. But it still recognized it was a card, and showed phone number in settings. Said out of service.
After realizing this, I found out you can change devices in the website real quick, and that should solve the "invalid SIM" issue.
Possibly some custom ROMs lack what restricts all this in the first place, and the Sim must be valid because it's a SIM, in service, and the proper network. No clue there. What carrier are you on?

Linux-Lord said:
From what I've been able to tell, the SIM cards are locked via IMEI (from MetroPCS I assume?, cause that's what they do), and will appear invalid, but should show the phone number in the settings. It should also say out of service, unless inserted into the phone that it originally belonged to.
Click to expand...
Click to collapse
The thing is, "stopped working" literally, it doesn't have out of service, phone number, no signal, not even the "emergency calls only", heck I can't even find my IMEI in settings nor *#0606#, I think that's what's causing the problem. This SIM also came from that Custom ROM device (originally inserted there, but bought as a standalone data plan)
Linux-Lord said:
and will appear invalid, but should show the phone number in the settings. It should also say out of service, unless inserted into the phone that it originally belonged to.
Click to expand...
Click to collapse
If you're talking about how it showed up like that on the G7 Play it used to work just fine in there, and no, that's not the original phone, it's just a phone I used to test if my SIM was still working
Linux-Lord said:
I have an E5 Play, and unlocked it using the device unlock app built-in from MetroPCS, after 3 months of service (maybe 6 I forget). After that, I could throw in other SIMs. But the phones those SIMs would come out of, they couldn't read the metro card. They said invalid. But it still recognized it was a card, and showed phone number in settings. Said out of service.
Click to expand...
Click to collapse
In this phone, G7 Power, it doesn't even recognize a card is in the tray anymore (unlike the G7 Play which at least knows there's one and G5+Custom ROM, in which it works)
Linux-Lord said:
After realizing this, I found out you can change devices in the website real quick, and that should solve the "invalid SIM" issue.
Possibly some custom ROMs lack what restricts all this in the first place, and the Sim must be valid because it's a SIM, in service, and the proper network. No clue there. What carrier are you on?
Click to expand...
Click to collapse
Not that it's gonna help much but OI (Brazil), and if that's on Motorola support page my G7 Power is main phone already.

Is the force encrypt disable necessary? And what does it do?

So, I have successfully rooted my Moto G7 Power by using the method above, but i tried not doing the "format data" and fortunately, I have rooted my phone. For the 1st attempt, I kinda soft-bricked my device by doing the steps briefly, my phone would always bootloop back to recovery mode, but after not doing the "format data" step, it led to a success. So for anyone who are currently experiencing bootloop, flash the stock firmware to your phone and root it again by using the method above but don't do the "format data" step. (flashing the stock firmware would not re-lock the bootloader, so you can try to root your phone again easily.)

error
I get this error
C:\Program Files (x86)\Minimal ADB and Fastboot> adb push magisk adb push Magisk-v20.1(20100).zip /tmp/
adb: error: cannot stat 'magisk': No such file or directory
adb: error: cannot stat 'adb': No such file or directory
adb: error: cannot stat 'push': No such file or directory
adb: error: cannot stat 'Magisk-v20.1(20100).zip': No such file or directory
---------- Post added at 08:07 AM ---------- Previous post was at 07:49 AM ----------
gladiatorbong said:
Well i messed it up some how. my phone would boot loop three times and then go back to the twrp screen. after 30 minutes of messing with it i gave up and factory reset it via the adb platform tools.
Click to expand...
Click to collapse
same here

brokenlocked22 said:
I get this error
C:\Program Files (x86)\Minimal ADB and Fastboot> adb push magisk adb push Magisk-v20.1(20100).zip /tmp/
adb: error: cannot stat 'magisk': No such file or directory
adb: error: cannot stat 'adb': No such file or directory
adb: error: cannot stat 'push': No such file or directory
adb: error: cannot stat 'Magisk-v20.1(20100).zip': No such file or directory
Click to expand...
Click to collapse
I mean, that's entirely on you, the command is wrong. Remove the first 3 words. And check the name of your Magisk ZIP (and location)

Hyoretsu said:
I mean, that's entirely on you, the command is wrong. Remove the first 3 words. And check the name of your Magisk ZIP (and location)
Click to expand...
Click to collapse
same thing as always.. no matter what lol

brokenlocked22 said:
same thing as always.. no matter what lol
Click to expand...
Click to collapse
If it's same thing as always then you're still using "adb push magisk adb push Magisk-v20.1(20100).zip /tmp/". There's no "but I'm not", if it's indeed the same error as before you're messing up on the syntax. Make sure you've put Magisk inside Minimal ADB folder, rename it to magisk.zip and run "adb push magisk.zip /tmp/"

why is magisk pushed to tmp and not to internal storage . Why not just push magisk to internal sotrage and just install that way through twrp or that wont work. just wondering.

Anyone tried this on XT1955-4?

dirtyscout said:
So when I got this device I went to root it and found there's not very good documentation on what to do to get root and recovery installed so after many boot loops and reinstall of firmware here is what I did to gain root and TWRP and have a stable environment. You will need to use ADB & Fastboot commands please install either this : https://forum.xda-developers.com/showthread.php?t=2317790 or https://forum.xda-developers.com/showthread.php?t=2588979 or you can install from here: https://developer.android.com/studio/releases/platform-tools. you will also need the Motorola drivers located here: https://support.motorola.com/us/en/solution/MS88481. Once you have obtained these you can proceed with the bootloader unlock. I have the unlocked version of the Motorola G7 Power so I was able to fallow the sets here: https://support.motorola.com/us/en/bootloader/unlockyourdeviceb. If you have a different variant I'm not sure if your able to unlock your bootloader please try and let me know in this thread. I AM NOT RESPONSIBLE IF YOU SCREW YOUR DEVICE UP OR FOR ANY DAMAGE TO YOUR DEVICE
Bootloader unlock steps:
1. On your device go to Settings and to System, Then About phone and click " Build Number " until you unlock developer options.
2. Back out one step and click the Advanced tab and then click " Developer Options ".
3. Once in developer options " OEM Unlocking " turn off " Automatic Updates " and enable "USB Debugging".
4. Once you have done USB Debugging open the start button type "CMD" and open a command prompt.
5. Once in command prompt type " adb devices " make sure you authorize the pc on the phone. then type in command prompt " adb reboot bootloader "
6. Once in bootloader type in command prompt " fastboot oem get_unlock_data " from here fallow the directions on the Motorola Bootloader Unlocking page: https://support.motorola.com/us/en/bootloader/unlockyourdevice
7. Take the number given to you by Motorola and type in command prompt " fastboot oem unlock CODE FROM MOTO " then enter the same command again and your device will be bootloader unlocked.
TWRP & Magisk install:
This is where I found it to be difficult to get things right either I would bootloop or I wouldn't be able to unencrypt my sd card in TWRP so I couldn't read things right all sorts of dumb issues. All the files I used are attached so please let me know if this works as well as it did for me. Please download the TWRP .img file it was too large to attach: https://dl.twrp.me/ocean/ Also make sure that your command prompt is in the directory of your stored files.
Here are a list of commands to get TWRP and install Root please be in bootloader mode to start this process.
1. fastboot boot twrp-3.3.1-2-ocean.img
2. In TWRP go to the wipe option and select the format and type " yes " once it has done that go back to the main TWRP page by hitting the home bottom and select Reboot and select Reboot Bootloader.
3. fastboot boot twrp-3.3.1-2-ocean.img
4. Once in TWRP adb push twrp-installer-3.3.1-2-ocean.zip /tmp/ then click install and navigate to the /tmp folder and install the TWRP .zip file
5. After you install TWRP do this : adb push Magisk-v20.1(20100).zip /tmp/ then navigate to your /tmp folder and install Magisk .zip file
6. After you install magisk you can reboot the system and let it sit it might loop once or twice but it will boot. I did the force encrypt disable with the attached zip file then i rebooted.
Also I found it best to do this with a fresh installed firmware that hasn't been booted yet I downloaded the firmware/ROM from here: https://mirrors.lolinet.com/firmware/moto/ocean/official/RETUS/ here is a list of commands to copy and paste into command prompt please make sure your device is in bootloader/ fastboot mode.
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
Click to expand...
Click to collapse
IM a bit confused should I flash a fresh installed firmware first right after i unlock the boot loader?
Also I found it best to do this with a fresh installed firmware that hasn't been booted yet I downloaded the firmware/ROM from here: https://mirrors.lolinet.com/firmware/moto/ocean/official/RETUS/ here is a list of commands to copy and paste into command prompt please make sure your device is in bootloader/ fastboot mode.

[Redacted]

Excellent guide, rooted my Moto G7 from Metro PCS.

brokenlocked22 said:
same thing as always.. no matter what lol
Click to expand...
Click to collapse
I LOVE IT!!! :good: