Kindle Fire rebooting - trying to go back to stock with TWRP - Kindle Fire Q&A, Help & Troubleshooting

My Kindle fire kept shutting down and rebooting so I am trying to erase and go back to stock with the latest Kindle Fire update.
I have TWRP v2.5.0.0 installed and downloaded the kindle fire update from the Amazon website:
http://www.amazon.com/gp/help/customer/display.html?nodeId=200790620
I renamed the file to update.zip and placed on the kindle fire via USB port. I get "error executing updater binary in zip '/sdcard/update.zip' . I made sure there were no hidden extensions on the update.zip when I renamed the Amazon update bin file.
what should I try next? I did a 'factor reset' from TWRP and it will no longer boot into the Kindle OS (which is fine as it rebooting all the time automatically anyways). However, I can not flash the Amazon rom to get working again.
Can anyone please help? I have spent many hours with no success so far.
Thank you

eebuckeye said:
My Kindle fire kept shutting down and rebooting so I am trying to erase and go back to stock with the latest Kindle Fire update.
I have TWRP v2.5.0.0 installed and downloaded the kindle fire update from the Amazon website:
http://www.amazon.com/gp/help/customer/display.html?nodeId=200790620
I renamed the file to update.zip and placed on the kindle fire via USB port. I get "error executing updater binary in zip '/sdcard/update.zip' . I made sure there were no hidden extensions on the update.zip when I renamed the Amazon update bin file.
what should I try next? I did a 'factor reset' from TWRP and it will no longer boot into the Kindle OS (which is fine as it rebooting all the time automatically anyways). However, I can not flash the Amazon rom to get working again.
Can anyone please help? I have spent many hours with no success so far.
Thank you
Click to expand...
Click to collapse
Let me understand this it loads to the system momentarily then crashes and reboots or never makes it to system boot?
If it makes it to system boot race the device as fast as you can to factory reset and reset it if it never boots to system for even 20 seconds or so you need a factory cable http://forum.xda-developers.com/showthread.php?t=1392693 post #9. in order to install TWRP and fff again .
Once in recovery you will do a factory reset and wipe everything except your sdcard prior to flashing stock. At that point you are better off flashing prerooted stock there is a new 6.3.3 available.

Thepooch said:
Let me understand this it loads to the system momentarily then crashes and reboots or never makes it to system boot?
If it makes it to system boot race the device as fast as you can to factory reset and reset it if it never boots to system for even 20 seconds or so you need a factory cable http://forum.xda-developers.com/showthread.php?t=1392693 post #9. in order to install TWRP and fff again .
Once in recovery you will do a factory reset and wipe everything except your sdcard prior to flashing stock. At that point you are better off flashing prerooted stock there is a new 6.3.3 available.
Click to expand...
Click to collapse
I can no longer boot to the Amazon Kindle OS because I used 'factory reset' in TWRP 2.5 which appears to have erased it. If there is a way to restore from this point please let me know.
I can still boot fine to TWRP so I should be able to work with it still, correct? I installed the Android SDK and use 'adb devices' which says:
Lists of devices attached
0123456789ABCDEF recovery
If TWRP would use my bin file that I changed to update.zip then I think I could reinstall the factory image with no problem.
What other things can I try?
Thanks!

eebuckeye said:
I can no longer boot to the Amazon Kindle OS because I used 'factory reset' in TWRP 2.5 which appears to have erased it. If there is a way to restore from this point please let me know.
I can still boot fine to TWRP so I should be able to work with it still, correct? I installed the Android SDK and use 'adb devices' which says:
Lists of devices attached
0123456789ABCDEF recovery
If TWRP would use my bin file that I changed to update.zip then I think I could reinstall the factory image with no problem.
What other things can I try?
Thanks!
Click to expand...
Click to collapse
Since adb works use adb to push another Rom to the device. Look at general section kinfaun's Kindle Fire for beginners and how to flash a ROM if not in awhile I will help you push one to the device.

eebuckeye said:
My Kindle fire kept shutting down and rebooting so I am trying to erase and go back to stock with the latest Kindle Fire update.
I have TWRP v2.5.0.0 installed and downloaded the kindle fire update from the Amazon website:
http://www.amazon.com/gp/help/customer/display.html?nodeId=200790620
I renamed the file to update.zip and placed on the kindle fire via USB port. I get "error executing updater binary in zip '/sdcard/update.zip' . I made sure there were no hidden extensions on the update.zip when I renamed the Amazon update bin file.
what should I try next? I did a 'factor reset' from TWRP and it will no longer boot into the Kindle OS (which is fine as it rebooting all the time automatically anyways). However, I can not flash the Amazon rom to get working again.
Can anyone please help? I have spent many hours with no success so far.
Thank you
Click to expand...
Click to collapse
you need TWRP 2.2.2.1 or lower to install an unmodified Stock update.zip
but you can install my [2014][Pre-Rooted][Stock]System Version 6.3.3-Original Kindle Fire Only
just download to pc> connect kindle to pc>
in TWRP select mount>check sd card>select mount usb
copy preroot.6.3.3.zip to sd card folder
unmount sd card>select install

When you go to mount make sure system and Data have no checks in the box either.

Holy crap that worked!!! Very easy!!
Thank you very much!!

eebuckeye said:
Holy crap that worked!!! Very easy!!
Thank you very much!!
Click to expand...
Click to collapse
Your out of the woods stay there make a backup for emergency recovery.

eebuckeye said:
Holy crap that worked!!! Very easy!!
Thank you very much!!
Click to expand...
Click to collapse
Great, glad it worked.
Sent from my Amazon OtterX using Tapatalk

I did a factory reset too, as I was interested in going back to stock. Now mine won't boot to Kindle OS, just to TWRP. I tried the 6.3.3 pre-rooted and Modaco, but it still won't boot. Seems like a similar issue but I can't figure it out. I appreciate any help!

gherman222 said:
I did a factory reset too, as I was interested in going back to stock. Now mine won't boot to Kindle OS, just to TWRP. I tried the 6.3.3 pre-rooted and Modaco, but it still won't boot. Seems like a similar issue but I can't figure it out. I appreciate any help!
Click to expand...
Click to collapse
Which twrp and bootloader?
Sent from my Amazon OtterX using Tapatalk

sd_shadow said:
Which twrp and bootloader?
Sent from my Amazon OtterX using Tapatalk
Click to expand...
Click to collapse
My guess is otterx or old.

Related

Kindle fire

I rooted my kindle fire. Then i wanted to resize my partition on kindle fire. So i used fireparted. When i rebooted my kindle it didnt load completely. So i installed it back to stock. When i rebooted it it said kindle fire has to restore back to factory settings or something. My root got deleted. Any ideas??
nesteaz said:
I rooted my kindle fire. Then i wanted to resize my partition on kindle fire. So i used fireparted. When i rebooted my kindle it didnt load completely. So i installed it back to stock. When i rebooted it it said kindle fire has to restore back to factory settings or something. My root got deleted. Any ideas??
Click to expand...
Click to collapse
yeah when you restore to stock it wipes out fff and twrp and your root so use kfu to install twrp and fff again no need to root if your gonna flash a rom just make sure you allow installation from unknown sources under device once you can access twrp make a backup that you will later rename noroot631 then flash to you liking
It says on KFU ADB Statusnline Boot Status: Unknown, and when i try to install twrp it doesnt do anything And when i try to reset it to factory it says failed to mount /cache(no such file directory) At the end.
nesteaz said:
It says on KFU ADB Statusnline Boot Status: Unknown, and when i try to install twrp it doesnt do anything And when i try to reset it to factory it says failed to mount /cache(no such file directory) At the end.
Click to expand...
Click to collapse
Keep working with your drivers It says online
What????
He means, make sure your drivers are installed correctly. You can check out tutorials and stuff on YouTube.
My kindle fire doesnt even boot up to the home screen. It says "Your Kindle has detected a problem and must clear App storage. The recovery process will erase applications and data from your debice. Apps from the appstore are stored in the cloud and can be reinstalled later. This will reset your kindit to its orgional factory settings. You will need to re-register your Kindle prior to downloading items from you Amazon account. Please press the power button to proceed." So when i press the power button it says reseting then is said "failed to mount /cache."
It doesn't reset back to factory. WHy is that??
any ideas?
Bump...
Cause you messed up your partitions using parted and then flashed stock who knows what you broke if I had to guess I bet something isn't mounting like your cache or SD card

[Q] Bootloop Freeze No FFF

i rooted my kindle fire yesterday and tried putting a custom rom on it. I did not update or install the FFF from the kindle fire utility , now im stuck on a bootloop an when i try to restore from my backup it says md5 sum incorrect and i cant restore it.. any idea on how to get my kindle fire working again.. TY
fresh329 said:
i rooted my kindle fire yesterday and tried putting a custom rom on it. I did not update or install the FFF from the kindle fire utility , now im stuck on a bootloop an when i try to restore from my backup it says md5 sum incorrect and i cant restore it.. any idea on how to get my kindle fire working again.. TY
Click to expand...
Click to collapse
Yeah in twrp settings when you go to restore set it to skip md5 check and signature verification. Also go to mount and make sure there are no checks I'm the boxes of system and data if there are unchecked them and try a reboot as for fff when you get it running use kfu to send that to your kindle kinda hard to access recovery without it
Edit: a couple of side notes did you wipe? What did you wipe? What rom did you use? If it was a rom with the gapps pre baked in IMO when the gapps are added in there are often mounting issues . If gapps were not added did you flash the proper gapps?
i use cwm recovery because that was what ive always used.. i can connect my kindle to computer an kfu recognizes it online but it freezes whenever i try to use twrp recovery or cliclk fff any backdoor way of switching recoveries without using kfu?
Make sure your driver is android adb composite interface if it says android adb interface this driver is incorrect . Twrp really is the standard for the kindle. If your having trouble booting to the system then mount your sdcard transfer this bootloader to your card unmount and flash it http://forum.xda-developers.com/showthread.php?t=1632375 only download it from this link. Then transfer this rom http://forum.xda-developers.com/showthread.php?t=1390773 and the gingerbread gapps provided on this page to your sdcard wipe factory reset wipe cache wipe dalvik wipe system flash rom flash gapps reboot system if prompted . Should boot fine for you then the rest can get sorted out when you have a running system use this http://forum.xda-developers.com/showthread.php?t=1500935 to replace cwmr with twrp when you reach that point good luck
Thank you worked like a charm

I need help to fix my kindle fire

Hello i need some help to fix my kindle fire. I was using the kf utility to try and root my fire and some how deleted my system files so when it reboots it goes to the twrp screen and when I try to reboot from there it says there is an error and system wont boot. I just got my kf a week ago and I am perplexed with fixing it, being I am used to Android 4.0, I would be thankfull for any help i could get.
Thanks very much racerx....
Download a rom on your computer. Hook the fire up to the usb port. In twrp, mount the sdcard and push the rom to the kindle. Unmount and install the rom from twrp. Reboot and enjoy.
Sent from my Amazon Kindle Fire using xda app-developers app
racerx4468 said:
Hello i need some help to fix my kindle fire. I was using the kf utility to try and root my fire and some how deleted my system files so when it reboots it goes to the twrp screen and when I try to reboot from there it says there is an error and system wont boot. I just got my kf a week ago and I am perplexed with fixing it, being I am used to Android 4.0, I would be thankfull for any help i could get.
Thanks very much racerx....
Click to expand...
Click to collapse
In TWRP go to mount, and mount as a USB drive. Then side-load a rom into any of the sd card folders. Custom rom or if you want to return to stock Kindle, download the latest update, change it from a bin to a .zip file, and load that.
Then, still in TWRP, choose to install the rom you loaded, and let it go from there.
Hah, didn't see Ixthusdan's reply, or else I wouldn't have posted dup info, sorry!
Install this Jelly Bean ROM. Sweetest thing ever.
http://forum.xda-developers.com/showthread.php?t=1778010

[Q] Unable to install stock ROM on Kindle Fire

Hi.So I used to have Cyanogenmod installed on my rooted Kindle Fire, along with FFF and TWRP recovery. I was not satisfied with the performance of Cyangogenmod, so I wanted to install the Stock Amazon ROM back onto the Fire. First, I booted into TWRP, and erased everything with the 'wipe' option (might not have been a good idea). I have downloaded the Amazon ROM from here: http://kindle-fire-updates.s3.amazonaws.com/update-kindle-6.3_D01E_4019920.bin, and renamed the file 'update.zip'. I mount the Fire, and drag over the update.zip, and then I go to 'install' in TWRP and select the update.zip, but after I start it, the install just fails, seconds after it's started. There are a couple errors, such as "Error executing updater binary in zip '/sdcard/update.zip'". I have ADB installed, and Kindle Fire Utility, which detects the device as 'online', boot status 4000. I have tried install COTR recovery with KFU, but it hangs at 'Activating Fastboot (4002)'. I would really appreciate any help with this, because it would really suck if it turns out that I bricked my Fire. Thanks!
Also having trouble taking my KF back to factory...
I am also having trouble taking my KF back to factory specs.
I am using TWRP recovery.
Wipes go just fine.
Install gives me this error...
Skipping MD5 check: no MD5 file found.
assert failed: getprop ("ro.product.device") == "blaze" ||
E:unknown command [err_string]
getprop("ro.build.product") == "blaze"
E:unknown command [err_string]
E:Error executing updater binary in zip '/sdcard/kindle/update.zip'
Error flashing zip '/sdcard/kindle/update.zip'
Updating partition details...
I am trying to go back to stock because I am now having TONS of trouble keeping files running without them crashing. Also, every time I try to read a book now, the Kindle app crashes before it ever really opens. I have tried uninstalling that app, then reinstalling even. No help at all.
Any help in this matter would be HUGELY APPRECIATED!!!!
Thanks,
me
BriteLeaf said:
I am also having trouble taking my KF back to factory specs.
I am using TWRP recovery.
Wipes go just fine.
Install gives me this error...
Skipping MD5 check: no MD5 file found.
assert failed: getprop ("ro.product.device") == "blaze" ||
E:unknown command [err_string]
getprop("ro.build.product") == "blaze"
E:unknown command [err_string]
E:Error executing updater binary in zip '/sdcard/kindle/update.zip'
Error flashing zip '/sdcard/kindle/update.zip'
Updating partition details...
I am trying to go back to stock because I am now having TONS of trouble keeping files running without them crashing. Also, every time I try to read a book now, the Kindle app crashes before it ever really opens. I have tried uninstalling that app, then reinstalling even. No help at all.
Any help in this matter would be HUGELY APPRECIATED!!!!
Thanks,
me
Click to expand...
Click to collapse
Yes I am getting almost the exact same error. I would really like a solution to this.
Ethanzh said:
Yes I am getting almost the exact same error. I would really like a solution to this.
Click to expand...
Click to collapse
So would I. I am glad that I am not the only one.
I am guessing...
I am guessing either us 3 are the only ones with this problem, or just no one wants to, or knows how to fix this problem =(
If a flash does not complete, it has to be a bad download. Get the file again and push it to the sdcard via twrp. But if you are having trouble, why flash factory? If it is some corruption, flash a rom. Kindle store and reader fail because of the app, generally. Notice my device says Nexus 7? That is how to fool the kindle apps on a fully functioning kindle fire.
Sent from my Nexus 7 using xda app-developers app
Ixthusdan said:
If a flash does not complete, it has to be a bad download. Get the file again and push it to the sdcard via twrp. But if you are having trouble, why flash factory? If it is some corruption, flash a rom. Kindle store and reader fail because of the app, generally. Notice my device says Nexus 7? That is how to fool the kindle apps on a fully functioning kindle fire.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I have redownloaded the flash from Amazon at least five times, all with the same results.
As far as pushing it to the sdcard via twrp, I guess I for one don't know how to do that.
As to why I would want to go back to factory with it, I guess for me, it is what I prefer.
Thank you for answering though. I do appreciate it.
Same here, fixed!
Ethanzh said:
Hi.So I used to have Cyanogenmod installed on my rooted Kindle Fire, along with FFF and TWRP recovery. I was not satisfied with the performance of Cyangogenmod, so I wanted to install the Stock Amazon ROM back onto the Fire. First, I booted into TWRP, and erased everything with the 'wipe' option (might not have been a good idea). I have downloaded the Amazon ROM from here: , and renamed the file 'update.zip'. I mount the Fire, and drag over the update.zip, and then I go to 'install' in TWRP and select the update.zip, but after I start it, the install just fails, seconds after it's started. There are a couple errors, such as "Error executing updater binary in zip '/sdcard/update.zip'". I have ADB installed, and Kindle Fire Utility, which detects the device as 'online', boot status 4000. I have tried install COTR recovery with KFU, but it hangs at 'Activating Fastboot (4002)'. I would really appreciate any help with this, because it would really suck if it turns out that I bricked my Fire. Thanks!
Click to expand...
Click to collapse
I had the same problem. I ended up reverting back to TWRP 2.2.2.1, which can read the update.zip properly.
I downloaded the older version from techerrata dot com --> twrp2 -->blaze-->openrecovery-twrp-2.2.2.1-blaze.img
I then used my fastboot cable and ran fastboot -i 0x1949 boot openrecovery-twrp-2.2.2.1-blaze.img.
This allowed me to run the older twrp, clear out my /system, and get back to stock.
mpeterso said:
I had the same problem. I ended up reverting back to TWRP 2.2.2.1, which can read the update.zip properly.
I downloaded the older version from techerrata dot com --> twrp2 -->blaze-->openrecovery-twrp-2.2.2.1-blaze.img
I then used my fastboot cable and ran fastboot -i 0x1949 boot openrecovery-twrp-2.2.2.1-blaze.img.
This allowed me to run the older twrp, clear out my /system, and get back to stock.
Click to expand...
Click to collapse
Thanks, trying this now.
TWRP 2.2.2.1 Worked
mpeterso said:
I had the same problem. I ended up reverting back to TWRP 2.2.2.1, which can read the update.zip properly.
I downloaded the older version from techerrata dot com --> twrp2 -->blaze-->openrecovery-twrp-2.2.2.1-blaze.img
I then used my fastboot cable and ran fastboot -i 0x1949 boot openrecovery-twrp-2.2.2.1-blaze.img.
This allowed me to run the older twrp, clear out my /system, and get back to stock.
Click to expand...
Click to collapse
Thanks for the tip. Worked like a champ.
mpeterso said:
I had the same problem. I ended up reverting back to TWRP 2.2.2.1, which can read the update.zip properly.
I downloaded the older version from techerrata dot com --> twrp2 -->blaze-->openrecovery-twrp-2.2.2.1-blaze.img
I then used my fastboot cable and ran fastboot -i 0x1949 boot openrecovery-twrp-2.2.2.1-blaze.img.
This allowed me to run the older twrp, clear out my /system, and get back to stock.
Click to expand...
Click to collapse
I just get stuck at < waiting for device > on my command prompt. Where am I supposed to open the cmd?
I just wanted to say, after several hours of searching through Google and messing with my Kindle, this thread finally helped me fix it.
My biggest issue was, I was unable to flash any thing, even the twrp. So what I had to do was this,
I googled the twrp 2.2.2.1 blaze img as mentioned here, then I renamed it to twrp.img and put it in the folder inside KFU -> Recovery
My other issue was with my Kindle being stuck at the Boot Logo saying, "Booting" and I noticed through trial and error, before the kindle goes to try to boot (When you can select Normal, Recovery, Reset Boot) that if I kept pressing the power button to cycle through the options, I could keep the Kindle in a Fastboot mode so I could use the KFU to install the TWRP 2.2.2.1
After that it was simple, booted into twrp, mounted the drive and stuck the Stock Rom from Amazon on there and installed it.
So I really just wanted to say thank you to this thread and hopefully I can contribute a small bit to someone if they have my issue.
Bump
Having the exact same issue when using KFU it just hangs there on activating fast boot
Cronus3166 said:
I just wanted to say, after several hours of searching through Google and messing with my Kindle, this thread finally helped me fix it.
My biggest issue was, I was unable to flash any thing, even the twrp. So what I had to do was this,
I googled the twrp 2.2.2.1 blaze img as mentioned here, then I renamed it to twrp.img and put it in the folder inside KFU -> Recovery
My other issue was with my Kindle being stuck at the Boot Logo saying, "Booting" and I noticed through trial and error, before the kindle goes to try to boot (When you can select Normal, Recovery, Reset Boot) that if I kept pressing the power button to cycle through the options, I could keep the Kindle in a Fastboot mode so I could use the KFU to install the TWRP 2.2.2.1
After that it was simple, booted into twrp, mounted the drive and stuck the Stock Rom from Amazon on there and installed it.
So I really just wanted to say thank you to this thread and hopefully I can contribute a small bit to someone if they have my issue.
Click to expand...
Click to collapse
This worked perfectly for me. Felt a little weird sitting there repeatedly pressing the power button as KFU searched for my device, but it worked. Thanks.

[Q] A real brick? Can not mount system

Hello all -
I have been toying with this gen 1 (maybe 2... not sure) off and on for about half a year now.
The device used to work great and was running stock OS. One day it just gave up the ghost. My daughter was using it and it would not start up into the OS. When starting the device, it would load the yellow Kindle Fire screen and just hang indefinitely.
Using a factory USB cable, I was able to use KFU and get TWRP loaded.
Within TWRP I can see the SD card (contains ".android" and "TWRP" folders) and even load files from the PC to the SD card.
When I go up levels, I can see what I think to be the OS directories, but none of them seem to contain any files.
One of the folders is named 'system' so I have a good feeling this is the OS.
However, I am not able to mount the system nor the data partitions within TWRP.
On my PC I can explore the device and I can see the SDcard perfectly fine, but no system or data.
What I would like to do is just reload the stock OS back on.
I have loaded the latest Amazon update to the SD card and tried to install it.
Near instantly, the TWRP screen says that it can't find directories and it fails/stops.
I have tried every button in TWRP for fixing permissions, wiped system, cache, etc. (everything cleared), resetting everything etc etc.
To no avail, I still can't get the system to mount.
I do encounter an error when fixing permissions as it fails every time. It says it can't fix permissions and wants me to try again after booting a ROM. (whatever that means?).
.
I have also tried using adb shell to force the device to reboot into fastload and then load the OS update.
I was able to get the latest TWRP loaded this way, but could not get the OS to go.... again, it can't find the directories.
Currently, when I start up the device I get a blue logo screen and can get into TWRP. If I go to boot normally, it continues to the stock yellow logo, dims, and freezes.
Try my http://forum.xda-developers.com/showthread.php?p=53650481
[2014][Pre-Rooted][Stock]System Version 6.3.3-Original Kindle Fire Only
Sent from my Amazon OtterX using Tapatalk
JamesShall said:
Hello all -
I have been toying with this gen 1 (maybe 2... not sure) off and on for about half a year now.
The device used to work great and was running stock OS. One day it just gave up the ghost. My daughter was using it and it would not start up into the OS. When starting the device, it would load the yellow Kindle Fire screen and just hang indefinitely.
Using a factory USB cable, I was able to use KFU and get TWRP loaded.
Within TWRP I can see the SD card (contains ".android" and "TWRP" folders) and even load files from the PC to the SD card.
When I go up levels, I can see what I think to be the OS directories, but none of them seem to contain any files.
One of the folders is named 'system' so I have a good feeling this is the OS.
However, I am not able to mount the system nor the data partitions within TWRP.
On my PC I can explore the device and I can see the SDcard perfectly fine, but no system or data.
What I would like to do is just reload the stock OS back on.
I have loaded the latest Amazon update to the SD card and tried to install it.
Near instantly, the TWRP screen says that it can't find directories and it fails/stops.
I have tried every button in TWRP for fixing permissions, wiped system, cache, etc. (everything cleared), resetting everything etc etc.
To no avail, I still can't get the system to mount.
I do encounter an error when fixing permissions as it fails every time. It says it can't fix permissions and wants me to try again after booting a ROM. (whatever that means?).
.
I have also tried using adb shell to force the device to reboot into fastload and then load the OS update.
I was able to get the latest TWRP loaded this way, but could not get the OS to go.... again, it can't find the directories.
Currently, when I start up the device I get a blue logo screen and can get into TWRP. If I go to boot normally, it continues to the stock yellow logo, dims, and freezes.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1949372
Also I dont think mounting system and data to pc from recovery actually works. Just drop a Rom on to your sdcard do a full wipe and flash it. Before you reboot select mount you dont have to be connected to pc make sure there are no checks in the boxes of system and data if so uncheck them then select reboot system.
Thepooch said:
http://forum.xda-developers.com/showthread.php?t=1949372
Click to expand...
Click to collapse
I give this a try. I wasn't able to do the first part with resetting the partition tables so wend to where it gets set it into recovery mode and moved on.
Everything worked from adb shell.
I went back to the KF, mounted the SD card.
Downloaded a new update for the KF from Amazon and renamed it from bin to zip.
Copied it to the KF SDcard. Verified the KF was in bootmode 5000 and tried to install.
No dice - errors.
I tried downloading the update through KFU. Pushing that update through ADB to the SDcard. TWRP factory reset and tried install.
No dice - errors.
Skips MD5 check.and then rattles this out:
assert failed: getprop("ro.product.device") == "blaze" | |
E:unknown command [err_string]
getprop("ro.product.device") == "blaze" | |
E: unknown command [err_string]
E:Error executing updated binary in zip '/sdcard/update.zip'
If it's a kindle fire 2, it maybe bricked.
How is it listed in device manager?
Sent from my Amazon OtterX using Tapatalk
---------- Post added at 11:18 PM ---------- Previous post was at 11:15 PM ----------
if it is a kindle Fire 1, TRWP 2.2.2.1 or lower is needed to install a stock update.zip
---------- Post added at 11:31 PM ---------- Previous post was at 11:18 PM ----------
just try my [2014][Pre-Rooted][Stock]System Version 6.3.3-Original Kindle Fire Only
with the twrp you have.
download update-kindle-prerooted.6.3.3.v1.zip
mount>sd card>check sd card>mount usb
copy update-kindle-prerooted.6.3.3.v1.zip to sd card
unmount sdcard
select install> select update-kindle-prerooted.6.3.3.v1.zip >swipe to confirm
wipe cache>back>reboot
JamesShall said:
I give this a try. I wasn't able to do the first part with resetting the partition tables so wend to where it gets set it into recovery mode and moved on.
Everything worked from adb shell.
I went back to the KF, mounted the SD card.
Downloaded a new update for the KF from Amazon and renamed it from bin to zip.
Copied it to the KF SDcard. Verified the KF was in bootmode 5000 and tried to install.
No dice - errors.
I tried downloading the update through KFU. Pushing that update through ADB to the SDcard. TWRP factory reset and tried install.
No dice - errors.
Skips MD5 check.and then rattles this out:
assert failed: getprop("ro.product.device") == "blaze" | |
E:unknown command [err_string]
getprop("ro.product.device") == "blaze" | |
E: unknown command [err_string]
E:Error executing updated binary in zip '/sdcard/update.zip'
Click to expand...
Click to collapse
Your error is due to the fact that your trying to flash blaze with an otter recovery it's totally normal new recoveries don't like old updater scripts.
The updater script in sd_shadow 's zip is modified to avoid that error. When flashing stock use cannibal open touch recovery it will not give you this error just make sure you wipe cache, dalvik, data and system prior to flashing update.zip. It's not a good idea anyway wipes your recovery and bootloader anyway, I would choose to keep those intact.
sd_shadow said:
Try my http://forum.xda-developers.com/showthread.php?p=53650481
Click to expand...
Click to collapse
So I've tried this 3 times now with no luck.
The first time I tried, I got through the TWRP text saying it was doing some stuff, doing more stuff, thanks to 2 people.
Then it went to the Teamwin screen and every few seconds that screen would blink. Eventually the screen went to sleep and pressed the power button once and the teamwin screen was still there.... so I left it alone for about 5 minutes.
After waiting, I held down the power button and restarted the KF.
Round 2.
Wiped everything and sent over a new copy of the ROM.
This time it got to the teamwin screen and after about 30 seconds of blinking, it went black - completely off. Seconds later the blinking teamwin screen came back in all of it's glory. After more blinking, the screen turned black, not off because pixels were still lit up, but black. Power button was blinking red very slowly. Waited... waited... held down the power button and restarted. Still operated with no OS booting up.
Round 3 - exactly like round 1.
Round 4 - Everything the same, but this time I noticed the lit black screen turned off and came back on. Then it just stays lit.... no power button color either.
OK back to how is it listed in device manager?
What version of twrp?
Sent from my Amazon OtterX using Tapatalk
sd_shadow said:
OK back to how is it listed in device manager?
What version of twrp?
Sent from my Amazon OtterX using Tapatalk
Click to expand...
Click to collapse
Device Manger has it listed as 'Android Phone' > 'Android Composite ADB Interface'
TWRP is 2.7.1.0 as your install instructions ask for (was 2.6.something-something before)
Are you verifying md5 checksums after downloading files?
Sent from my Amazon OtterX using Tapatalk
When you enter recovery go to setting disable screen timeout that will save you some hassle.
sd_shadow said:
Are you verifying md5 checksums after downloading files?
Sent from my Amazon OtterX using Tapatalk
Click to expand...
Click to collapse
I did for TWRP
"d9020f2d50985683cdf10693c8ac5dc9"
Matched!
Thepooch said:
When you enter recovery go to setting disable screen timeout that will save you some hassle.
Click to expand...
Click to collapse
Thanks - I had the slider adjusted, but totally overlooked the button for disable.
I downloaded COT
Cannibal Open Touch Recovery 2.1.3
for 600 X 1024.
I found the recovery and boot img files it needs from an unpacked update.
Does it really need CWM installed? Or will TWRP get the job done?
JamesShall said:
Thanks - I had the slider adjusted, but totally overlooked the button for disable.
I downloaded COT
Cannibal Open Touch Recovery 2.1.3
for 600 X 1024.
I found the recovery and boot img files it needs from an unpacked update.
Does it really need CWM installed? Or will TWRP get the job done?
Click to expand...
Click to collapse
I'm pretty sure that is not the COTR you want.
JamesShall said:
Thanks - I had the slider adjusted, but totally overlooked the button for disable.
I downloaded COT
Cannibal Open Touch Recovery 2.1.3
for 600 X 1024.
I found the recovery and boot img files it needs from an unpacked update.
Does it really need CWM installed? Or will TWRP get the job done?
Click to expand...
Click to collapse
If your gonna flash update.zip make sure it's not update.zip.zip cotr will flash it wipe everything except your sdcard first. If your gonna flash sd_shadow zip the twrp you are using will work.
This http://forum.xda-developers.com/showthread.php?t=2025793 Use kfu to download it fast boot to install or just select reboot bootloader and use kfu to send it.
download cotr.img for kindle fire 1 http://d-h.st/XWy
verify md5
reboot to bootloader
in command prompt
fastboot flash recovery cotr.img
fastboot reboot
sd_shadow said:
download cotr.img for kindle fire 1 http://d-h.st/XWy
verify md5
reboot to bootloader
in command prompt
fastboot flash recovery cotr.img
fastboot reboot
Click to expand...
Click to collapse
Thanks! Got it on there. I tried it from KFU, but it didn't take. The img you provided worked!
That link for COT wasn't COTR and I got absolutely nowhere with it. Waste of time.
JamesShall said:
Thanks! Got it on there. I tried it from KFU, but it didn't take.
I believe that the link KFU used is dead.
Click to expand...
Click to collapse
The img you provided worked!
That link for COT wasn't COTR and I got absolutely nowhere with it. Waste of time.
Click to expand...
Click to collapse
Great
For the future i made a zip version of COTR that can b installed from TWRP zip-Cannibal-Open-Touch-Recovery-2.1.zip and I verified that my update-kindle-prerooted.6.3.3.v1.zip installs correctlly in COTR also.
sd_shadow said:
Great
For the future i made a zip version of COTR that can b installed from TWRP zip-Cannibal-Open-Touch-Recovery-2.1.zip and I verified that my update-kindle-prerooted.6.3.3.v1.zip installs correctlly in COTR also.
Click to expand...
Click to collapse
Well...
windows no longer allows me to look at the SD card after changing over to COTR.
Same goes with KFU and ADB devices.
I verified the driver and SDK files are still edited correctly.
Device manager still sees when the KF is attached and I get the sound of connect and disconnecting from Windows.
In storage management I have tried everything.
So, I can't send over another 'update.zip' of Amazon image.
I still have the prerooted 6.3.3.zip on the SD - so I tried to install it.
COTR has a status bar fr the installation.
When it gets about 1/4 of the way, it errors saying it can't find some signatures. I get the option to continue anyway so I go ahead.
does stuff.
does more stuff.
- takes a long nap
Thanks 2 people.
- status bar goes to about 3/4 of the way and.... stops doing anything.
Round 2!
Same thing, but this time it made it. Install complete!
Only thing different is that I unplugged from the PC while it was taking it's nap after doing more stuff.
KF is now looking for a WiFi network.
THANK YOU BOTH FOR THE HELP!!!! :good::good::good:

Categories

Resources