i rooted my kindle fire yesterday and tried putting a custom rom on it. I did not update or install the FFF from the kindle fire utility , now im stuck on a bootloop an when i try to restore from my backup it says md5 sum incorrect and i cant restore it.. any idea on how to get my kindle fire working again.. TY
fresh329 said:
i rooted my kindle fire yesterday and tried putting a custom rom on it. I did not update or install the FFF from the kindle fire utility , now im stuck on a bootloop an when i try to restore from my backup it says md5 sum incorrect and i cant restore it.. any idea on how to get my kindle fire working again.. TY
Click to expand...
Click to collapse
Yeah in twrp settings when you go to restore set it to skip md5 check and signature verification. Also go to mount and make sure there are no checks I'm the boxes of system and data if there are unchecked them and try a reboot as for fff when you get it running use kfu to send that to your kindle kinda hard to access recovery without it
Edit: a couple of side notes did you wipe? What did you wipe? What rom did you use? If it was a rom with the gapps pre baked in IMO when the gapps are added in there are often mounting issues . If gapps were not added did you flash the proper gapps?
i use cwm recovery because that was what ive always used.. i can connect my kindle to computer an kfu recognizes it online but it freezes whenever i try to use twrp recovery or cliclk fff any backdoor way of switching recoveries without using kfu?
Make sure your driver is android adb composite interface if it says android adb interface this driver is incorrect . Twrp really is the standard for the kindle. If your having trouble booting to the system then mount your sdcard transfer this bootloader to your card unmount and flash it http://forum.xda-developers.com/showthread.php?t=1632375 only download it from this link. Then transfer this rom http://forum.xda-developers.com/showthread.php?t=1390773 and the gingerbread gapps provided on this page to your sdcard wipe factory reset wipe cache wipe dalvik wipe system flash rom flash gapps reboot system if prompted . Should boot fine for you then the rest can get sorted out when you have a running system use this http://forum.xda-developers.com/showthread.php?t=1500935 to replace cwmr with twrp when you reach that point good luck
Thank you worked like a charm
Related
I rooted my kindle fire. Then i wanted to resize my partition on kindle fire. So i used fireparted. When i rebooted my kindle it didnt load completely. So i installed it back to stock. When i rebooted it it said kindle fire has to restore back to factory settings or something. My root got deleted. Any ideas??
nesteaz said:
I rooted my kindle fire. Then i wanted to resize my partition on kindle fire. So i used fireparted. When i rebooted my kindle it didnt load completely. So i installed it back to stock. When i rebooted it it said kindle fire has to restore back to factory settings or something. My root got deleted. Any ideas??
Click to expand...
Click to collapse
yeah when you restore to stock it wipes out fff and twrp and your root so use kfu to install twrp and fff again no need to root if your gonna flash a rom just make sure you allow installation from unknown sources under device once you can access twrp make a backup that you will later rename noroot631 then flash to you liking
It says on KFU ADB Statusnline Boot Status: Unknown, and when i try to install twrp it doesnt do anything And when i try to reset it to factory it says failed to mount /cache(no such file directory) At the end.
nesteaz said:
It says on KFU ADB Statusnline Boot Status: Unknown, and when i try to install twrp it doesnt do anything And when i try to reset it to factory it says failed to mount /cache(no such file directory) At the end.
Click to expand...
Click to collapse
Keep working with your drivers It says online
What????
He means, make sure your drivers are installed correctly. You can check out tutorials and stuff on YouTube.
My kindle fire doesnt even boot up to the home screen. It says "Your Kindle has detected a problem and must clear App storage. The recovery process will erase applications and data from your debice. Apps from the appstore are stored in the cloud and can be reinstalled later. This will reset your kindit to its orgional factory settings. You will need to re-register your Kindle prior to downloading items from you Amazon account. Please press the power button to proceed." So when i press the power button it says reseting then is said "failed to mount /cache."
It doesn't reset back to factory. WHy is that??
any ideas?
Bump...
Cause you messed up your partitions using parted and then flashed stock who knows what you broke if I had to guess I bet something isn't mounting like your cache or SD card
Hey guys, trying to root this kindle for my friend. Ive two so far. I dunno what happened but I'm stuck in TWRP. I was using kindle fire utility 0.9.6 did option 2 to install super user, then went to option 3 and it froze up so I powered on and off, now the fire is booting into this TWRP and I have no idea how to install the hellfile rom that I want. the ROM is not on the sd card and I can't get it to mount so I can view it on my computer when plugged in.
i need help!!!
UPDATE*
I just ran # 4 while rebooting and it seemed to install CWR..now I'm back to what appears to be stock kindle software. wtfff is going on
you definately do not want cwmr...
Did the ROM maybe go to a download folder? Once you get into twrp do a backup first thing then factory wipe, wipe(not format) cache and dalvik. Then hit install and browse the files/folders until you find your ROM and install. Reboot system. And yeah...dump cwm.
And you should really try installing su thru the recovery and try your hand at adb..
I rooted my Kindle Fire using KFU 0.9.5 and flashed a custom ROM. It worked fine for a few days and then just crashed -- The options bar located on the bottom disappeared and the error message was: System UI has crashed. (I have attached two pictures for better clarity)
Also, whenever I boot up, there is no yellow flame that appears, it goes to the moving colourful discs straight on.
I tried using terminal emulator and entered many codes in some hope of mounting USB Mass Storage so that I can use KFU and restore my Kindle, but in vain.
I have tried EVERYTHING. I've been at this for 6 days now and am at wits end. :crying: I have read up close to a 100 articles; this was my last resort.
I just want to get the Kindle's stock OS back - no root, nothing.
And the only was is, I suppose, if I am able to mount my Kindle as USB Mass Storage onto my computer.
ANY help is appreciated!
AndroBoss.
I don't have a kindle but did you try wiping it and reinstalling it?
Sent from my SPH-L710 using xda app-developers app
jr71x said:
I don't have a kindle but did you try wiping it and reinstalling it?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
As it now runs on ICS, there is no Gingerbread for Kindle anymore on it. I can't wipe it clean from the device or atleast I don't know how to, please help?
All the wipes you should need to perform can be done in twrp recovery. Wipe factory reset , wipe cache , wipe dalvik and wipe the system. Reflash ROM , reflash gapps , reboot then system if prompted and you should be good to go.
Edit: failing to use the correct method to return to stock will just cause more problems. Rather than trying to go back to pure stock without fff and twrp I suggest you perform the above wipes and flash this instead http://forum.xda-developers.com/showthread.php?t=1439916 its just modified stock with Google play and it will not wipe out your recovery and bootloader.
Thepooch said:
All the wipes you should need to perform can be done in twrp recovery. Wipe factory reset , wipe cache , wipe dalvik and wipe the system. Reflash ROM , reflash gapps , reboot then system if prompted and you should be good to go.
Edit: failing to use the correct method to return to stock will just cause more problems. Rather than trying to go back to pure stock without fff and twrp I suggest you perform the above wipes and flash this instead http://forum.xda-developers.com/showthread.php?t=1439916 its just modified stock with Google play and it will not wipe out your recovery and bootloader.
Click to expand...
Click to collapse
Okay, I will flash what you suggested but that's the problem. I am unable to access TWRP recovery from my Kindle. When it boots up there is no yellow flame that appears as the custom ROM is ICS 4.0.
I tried mounting a twrp.img on to the SD Card after downloading one straight onto the tab but of no avail :/
What do you suggest? Is there any way I can get the TWRP Recovery to come up so that I can get the modified stock that you suggested?
Thanks for your help, regardless
Androboss1994 said:
Okay, I will flash what you suggested but that's the problem. I am unable to access TWRP recovery from my Kindle. When it boots up there is no yellow flame that appears as the custom ROM is ICS 4.0.
I tried mounting a twrp.img on to the SD Card after downloading one straight onto the tab but of no avail :/
What do you suggest? Is there any way I can get the TWRP Recovery to come up so that I can get the modified stock that you suggested?
Thanks for your help, regardless
Click to expand...
Click to collapse
I know you said you read "close to a 100 articles" in your OP, but I suggest you do a little more reading. Get yourself acquainted with the key software components of the Kindle Fire and how they work together. Some of the things you say in your posts suggest you would benefit from the first post here...
http://forum.xda-developers.com/showthread.php?t=1552547
- The yellow flame you are looking for is an older version of the FireFireFire (FFF) bootloader, but there is a newer/better version.
- The KF cannot go to "the moving colorful discs straight on" because the first thing you will see is the bootloader's bootlogo.
- You must determine what bootloader is currently installed on the device because it is key in determining how you can get into recovery (TWRP).
- "Mounting" sdcard means to make the storage space available to either the host computer or the Kindle Fire, but it almost always means the former. Your comment about having "tried mounting a twrp.img on to the SD Card" doesn't make sense.
My guess is you do not have FFF installed and the device is booting with the stock bootloader. Odds are you will still be able to boot into your current ICS system and execute an adb command to set the bootmode to recovery (5001). Then a reboot should take you into TWRP. At that point, you should try to mount the sdcard partition onto your computer and transfer the latest FFF and whatever ROM you want to flash. Be sure to install FFF as soon as possible. This will allow you to get back into TWRP even if your system software becomes unbootable. Only when you are comfortable with FFF and TWRP should you consider flashing another ROM onto the device.
In broad strokes, the above paragraph contains the steps you will take to get your device running properly again. If any part of it doesn't make much sense to you, I suggest you read the above article again. Then, you can figure out the specifics commands from the third post of the link above and the following...
http://forum.xda-developers.com/showthread.php?t=1638452
kinfauns said:
I know you said you read "close to a 100 articles" in your OP, but I suggest you do a little more reading. Get yourself acquainted with the key software components of the Kindle Fire and how they work together. Some of the things you say in your posts suggest you would benefit from the first post here...
http://forum.xda-developers.com/showthread.php?t=1552547
- The yellow flame you are looking for is an older version of the FireFireFire (FFF) bootloader, but there is a newer/better version.
- The KF cannot go to "the moving colorful discs straight on" because the first thing you will see is the bootloader's bootlogo.
- You must determine what bootloader is currently installed on the device because it is key in determining how you can get into recovery (TWRP).
- "Mounting" sdcard means to make the storage space available to either the host computer or the Kindle Fire, but it almost always means the former. Your comment about having "tried mounting a twrp.img on to the SD Card" doesn't make sense.
My guess is you do not have FFF installed and the device is booting with the stock bootloader. Odds are you will still be able to boot into your current ICS system and execute an adb command to set the bootmode to recovery (5001). Then a reboot should take you into TWRP. At that point, you should try to mount the sdcard partition onto your computer and transfer the latest FFF and whatever ROM you want to flash. Be sure to install FFF as soon as possible. This will allow you to get back into TWRP even if your system software becomes unbootable. Only when you are comfortable with FFF and TWRP should you consider flashing another ROM onto the device.
In broad strokes, the above paragraph contains the steps you will take to get your device running properly again. If any part of it doesn't make much sense to you, I suggest you read the above article again. Then, you can figure out the specifics commands from the third post of the link above and the following...
http://forum.xda-developers.com/showthread.php?t=1638452
Click to expand...
Click to collapse
WOW! Okay, thank you so much; I'll keep you updated. I'll do all this tonight! Cheers :good:
I seem to have tried to wipe everything on my kindle fire first generation trying to restore as my backup of the stock rom has been deleted. It was also not currently on any rom and i can not get it to boot up it just stays in the twrp boot screen instead of transitioning to the normal orange and white one. I can however still boot into recovery just not to the rom itself being that there is none. The mount option does not work as it will not come up visibly on the computer or under the hardware/device manager. So all in all i have no way to connect my kindle to install the stock rom back again. Please help as fast as possible. I have checked many other threads to no avail and this is were im at stuck with a dead kindle.
forrest180 said:
I seem to have tried to wipe everything on my kindle fire first generation trying to restore as my backup of the stock rom has been deleted. It was also not currently on any rom and i can not get it to boot up it just stays in the twrp boot screen instead of transitioning to the normal orange and white one. I can however still boot into recovery just not to the rom itself being that there is none. The mount option does not work as it will not come up visibly on the computer or under the hardware/device manager. So all in all i have no way to connect my kindle to install the stock rom back again. Please help as fast as possible. I have checked many other threads to no avail and this is were im at stuck with a dead kindle.
Click to expand...
Click to collapse
Go into mounts inside TWRP and mount sdcard. Once sdcard is mounted you will be able to see it on your computer when a USB cable is connected. Place a different rom onto the sdcard and unmount sdcard. Wipe data (factory reset) and wipe cache and dalvik cache. Go to install and install the new rom you placed onto the sdcard. You should be all set, it should boot now.
If it doesn't, you may be stuck in fastboot. To get out of fastboot, connect to the computer and run KFU and select number 1.
Sent from my LG-MS770
SwoRNLeaDejZ said:
Go into mounts inside TWRP and mount sdcard. Once sdcard is mounted you will be able to see it on your computer when a USB cable is connected. Place a different rom onto the sdcard and unmount sdcard. Wipe data (factory reset) and wipe cache and dalvik cache. Go to install and install the new rom you placed onto the sdcard. You should be all set, it should boot now.
If it doesn't, you may be stuck in fastboot. To get out of fastboot, connect to the computer and run KFU and select number 1.
Sent from my LG-MS770
Click to expand...
Click to collapse
as i said in my post the mount option will not work on the twrp and it will not come up visibly
it will boot just not past the blue kindle fire twrp logo because there is no rom
forrest180 said:
as i said in my post the mount option will not work on the twrp and it will not come up visibly
it will boot just not past the blue kindle fire twrp logo because there is no rom
Click to expand...
Click to collapse
You have to press the power button repeatedly at the blue fire logo to enter recovery
Sent from my Amazon Kindle Fire using Tapatalk 2
My Kindle fire kept shutting down and rebooting so I am trying to erase and go back to stock with the latest Kindle Fire update.
I have TWRP v2.5.0.0 installed and downloaded the kindle fire update from the Amazon website:
http://www.amazon.com/gp/help/customer/display.html?nodeId=200790620
I renamed the file to update.zip and placed on the kindle fire via USB port. I get "error executing updater binary in zip '/sdcard/update.zip' . I made sure there were no hidden extensions on the update.zip when I renamed the Amazon update bin file.
what should I try next? I did a 'factor reset' from TWRP and it will no longer boot into the Kindle OS (which is fine as it rebooting all the time automatically anyways). However, I can not flash the Amazon rom to get working again.
Can anyone please help? I have spent many hours with no success so far.
Thank you
eebuckeye said:
My Kindle fire kept shutting down and rebooting so I am trying to erase and go back to stock with the latest Kindle Fire update.
I have TWRP v2.5.0.0 installed and downloaded the kindle fire update from the Amazon website:
http://www.amazon.com/gp/help/customer/display.html?nodeId=200790620
I renamed the file to update.zip and placed on the kindle fire via USB port. I get "error executing updater binary in zip '/sdcard/update.zip' . I made sure there were no hidden extensions on the update.zip when I renamed the Amazon update bin file.
what should I try next? I did a 'factor reset' from TWRP and it will no longer boot into the Kindle OS (which is fine as it rebooting all the time automatically anyways). However, I can not flash the Amazon rom to get working again.
Can anyone please help? I have spent many hours with no success so far.
Thank you
Click to expand...
Click to collapse
Let me understand this it loads to the system momentarily then crashes and reboots or never makes it to system boot?
If it makes it to system boot race the device as fast as you can to factory reset and reset it if it never boots to system for even 20 seconds or so you need a factory cable http://forum.xda-developers.com/showthread.php?t=1392693 post #9. in order to install TWRP and fff again .
Once in recovery you will do a factory reset and wipe everything except your sdcard prior to flashing stock. At that point you are better off flashing prerooted stock there is a new 6.3.3 available.
Thepooch said:
Let me understand this it loads to the system momentarily then crashes and reboots or never makes it to system boot?
If it makes it to system boot race the device as fast as you can to factory reset and reset it if it never boots to system for even 20 seconds or so you need a factory cable http://forum.xda-developers.com/showthread.php?t=1392693 post #9. in order to install TWRP and fff again .
Once in recovery you will do a factory reset and wipe everything except your sdcard prior to flashing stock. At that point you are better off flashing prerooted stock there is a new 6.3.3 available.
Click to expand...
Click to collapse
I can no longer boot to the Amazon Kindle OS because I used 'factory reset' in TWRP 2.5 which appears to have erased it. If there is a way to restore from this point please let me know.
I can still boot fine to TWRP so I should be able to work with it still, correct? I installed the Android SDK and use 'adb devices' which says:
Lists of devices attached
0123456789ABCDEF recovery
If TWRP would use my bin file that I changed to update.zip then I think I could reinstall the factory image with no problem.
What other things can I try?
Thanks!
eebuckeye said:
I can no longer boot to the Amazon Kindle OS because I used 'factory reset' in TWRP 2.5 which appears to have erased it. If there is a way to restore from this point please let me know.
I can still boot fine to TWRP so I should be able to work with it still, correct? I installed the Android SDK and use 'adb devices' which says:
Lists of devices attached
0123456789ABCDEF recovery
If TWRP would use my bin file that I changed to update.zip then I think I could reinstall the factory image with no problem.
What other things can I try?
Thanks!
Click to expand...
Click to collapse
Since adb works use adb to push another Rom to the device. Look at general section kinfaun's Kindle Fire for beginners and how to flash a ROM if not in awhile I will help you push one to the device.
eebuckeye said:
My Kindle fire kept shutting down and rebooting so I am trying to erase and go back to stock with the latest Kindle Fire update.
I have TWRP v2.5.0.0 installed and downloaded the kindle fire update from the Amazon website:
http://www.amazon.com/gp/help/customer/display.html?nodeId=200790620
I renamed the file to update.zip and placed on the kindle fire via USB port. I get "error executing updater binary in zip '/sdcard/update.zip' . I made sure there were no hidden extensions on the update.zip when I renamed the Amazon update bin file.
what should I try next? I did a 'factor reset' from TWRP and it will no longer boot into the Kindle OS (which is fine as it rebooting all the time automatically anyways). However, I can not flash the Amazon rom to get working again.
Can anyone please help? I have spent many hours with no success so far.
Thank you
Click to expand...
Click to collapse
you need TWRP 2.2.2.1 or lower to install an unmodified Stock update.zip
but you can install my [2014][Pre-Rooted][Stock]System Version 6.3.3-Original Kindle Fire Only
just download to pc> connect kindle to pc>
in TWRP select mount>check sd card>select mount usb
copy preroot.6.3.3.zip to sd card folder
unmount sd card>select install
When you go to mount make sure system and Data have no checks in the box either.
Holy crap that worked!!! Very easy!!
Thank you very much!!
eebuckeye said:
Holy crap that worked!!! Very easy!!
Thank you very much!!
Click to expand...
Click to collapse
Your out of the woods stay there make a backup for emergency recovery.
eebuckeye said:
Holy crap that worked!!! Very easy!!
Thank you very much!!
Click to expand...
Click to collapse
Great, glad it worked.
Sent from my Amazon OtterX using Tapatalk
I did a factory reset too, as I was interested in going back to stock. Now mine won't boot to Kindle OS, just to TWRP. I tried the 6.3.3 pre-rooted and Modaco, but it still won't boot. Seems like a similar issue but I can't figure it out. I appreciate any help!
gherman222 said:
I did a factory reset too, as I was interested in going back to stock. Now mine won't boot to Kindle OS, just to TWRP. I tried the 6.3.3 pre-rooted and Modaco, but it still won't boot. Seems like a similar issue but I can't figure it out. I appreciate any help!
Click to expand...
Click to collapse
Which twrp and bootloader?
Sent from my Amazon OtterX using Tapatalk
sd_shadow said:
Which twrp and bootloader?
Sent from my Amazon OtterX using Tapatalk
Click to expand...
Click to collapse
My guess is otterx or old.