My Sony LiveView does not work in Nexus 5.
has anyone had this problem?
I'm using my Nexus 5 with Sony SmartWatch with no problems.
The problem you're having is in pairing the device or using the watch?
The problem is in pairing the device, my phone don't find the liveview, but in other phone the liveview pairing working as well
leuuuuu said:
The problem is in pairing the device, my phone don't find the liveview, but in other phone the liveview pairing working as well
Click to expand...
Click to collapse
Did you pressed the power button for several seconds until the pairing code (5 numbers) appears in the LiveView screen?
I was having problems too, until I remebered this step is necessary for pairing the device...
Pairing Nexus 5 (Android L) with LiveView
andrelessa said:
Did you pressed the power button for several seconds until the pairing code (5 numbers) appears in the LiveView screen?
I was having problems too, until I remebered this step is necessary for pairing the device...
Click to expand...
Click to collapse
Thanks for help! I forgot this too, hehe!
Related
hello,
I bought sony bluetooth MW600 but my galaxy note do not recognize?
Can you help me.
hanh
galaxy note rom kingdroid 5.4
Hold the powerbutton on the headset for more than 5 seconds.. It goes into discoverable mode.. Default pin would be 0000
Sent from my GT-N7000 using XDA
Mine is working correctly, i didn't need to put any PIN, automaticaly connected correctly.
When you try to conect push phone button or play button (depens of the funtion that you want to use) and select the device that you want to connect.
To add a device you have to follow the instruccions on last post
Hi guys,
I'm trying this for a while now and can't figure out what's wrong. I can't connect my SE MW600 to my HOX over bluetooth. It worked great on my HTC Desire but just can't get it to connect..
Thnx in advance.
Sorry i can't help but I was looking at getting these to replace my old sony headset that plays up with my one x, so would be very interested in your thoughts on this headset using it with the one x (if you ever get it to work). Thanks.
I've been using this for a while, with great success.
I have been using my mw600 to play songs through my speakers, and phone calls ocassionally... there is some stutter once in a while but it works perfectly, never had pairing issues
flitjes said:
Hi guys,
I'm trying this for a while now and can't figure out what's wrong. I can't connect my SE MW600 to my HOX over bluetooth. It worked great on my HTC Desire but just can't get it to connect..
Thnx in advance.
Click to expand...
Click to collapse
Did you clear the past pairing on the mw600?
It can only connect to 3 devices at a time and i don't know if you can replace without reseting the headset.
Try turning it off, then holding the power button and call button to reset it, then try pairing with your phone.
I didnt have issues with mine.
fredfb said:
Did you clear the past pairing on the mw600?
It can only connect to 3 devices at a time and i don't know if you can replace without reseting the headset.
Try turning it off, then holding the power button and call button to reset it, then try pairing with your phone.
I didnt have issues with mine.
Click to expand...
Click to collapse
I had the same problem, doing this i could pair them up. Thanks.
I am trying to connect to a gear 4 speaker, the phone finds the speaker ok, I click on it to pair but it fails every time, anyone any ideas?
jag233 said:
I am trying to connect to a gear 4 speaker, the phone finds the speaker ok, I click on it to pair but it fails every time, anyone any ideas?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1695919
i have also found that if you used it previously you will need to make the unit FORGET the phone or power it up with the phone screen on and let it ask the phone it's self.
what i am trying to say is the phone cant connect because the unit thinks it is already authenticated.
my head deck in my car wouldn't work then i started my car one day with the phone unlocked and it asked for the paring pin in the notification bar...
hope this makes some sense
Pvy.
Hey, i have this Stereo Headset, they worked like charm in the SGS 2 or Motorola Razr, but i can't make it work with the S3. I've tryied a lot of roms but there is no way. There is any chance to "add" the headsets HID to the device? Or something, i don't know...
any help?
can't post the link but I know someone on here got it to work cause it made me consider buying one
thread is titled "SGS III with MW-600"
I am using a MW-600 with my Galaxy S3 without a problem.
Mine works. It's hooked up right now around my neck. stock Rom of course.
captain's tsnGUi
al_fonce said:
I am using a MW-600 with my Galaxy S3 without a problem.
Click to expand...
Click to collapse
Me too, it works well
so i think it's something about the roms... now i'm using omega. There is no way to "copy" the stock BT hids to my phones?
Have you tried deleting the paired devices from the the MW600's memory?
I'm running the 8/1 CM10 preview rom, and my MW-600 works perfectly. I haven't tried to use it for a phone call, but I paired it and streamed a few minutes of XM Radio earlier today without a problem.
I've had zero issues (minus one random restart) since I flashed the CM10 preview rom last night. Not sure what all isn't working, but it's apparently stuff I don't use. You might look into it, especially if you want a stock experience.
, thanks. I didn't know that it has a memory for paired devices. Now it works.
Its Very Easy to reset or clear all paired devices from MW600
To reset the headset:
1 Make sure the headset is turned off.
2 Press and hold down POWERmw600 resetuntil the pairing indication appears.
3 Simultaneously press and hold down POWER mw600 resetand CALLmw600 resetbutton until the headset turns off.
Click to expand...
Click to collapse
takato23 said:
, thanks. I didn't know that it has a memory for paired devices. Now it works.
Click to expand...
Click to collapse
Thanks. Full reset helped. Prior to this, I paired but only media play was working, not phone audio. Now both!
clear memory on mw600 to get GS3 to work
takato23 said:
, thanks. I didn't know that it has a memory for paired devices. Now it works.
Click to expand...
Click to collapse
clearing memory on the mw600 worked great... I thought there was something wrong with the GS3! Of course, not!
---------- Post added at 10:32 PM ---------- Previous post was at 10:28 PM ----------
takato23 said:
, thanks. I didn't know that it has a memory for paired devices. Now it works.
Click to expand...
Click to collapse
worked great to enable connection with GS3...
Its Very Easy to reset or clear all paired devices from MW600
To reset the headset:
1 Make sure the headset is turned off.
2 Press and hold down POWERmw600 resetuntil the pairing indication appears.
3 Simultaneously press and hold down POWER mw600 resetand CALLmw600 resetbutton until the headset turns off.
Dead but repaired
After more than 1 year of use (mainly during sport) my mw600 died:impossible to charge it.
I open it and saw loosy contact holding the battery. I reshape them and my mw600 is now working.
Maybe it can help
PS there are 2 screwsne under the clip and one under the small sticker near the Usb connector
I just got my Degauss Labs 'Dual Driver' android headphones for my Z1 Compact. Problem is, the volume controls don't work. Volume up seems to work semi-well, but a volume down click results in a long consecutive press. I read some people have a similar problem with the Sony STH30-headphones, but I haven't come across a solution.
So far, I've:
Tried the headphones in a Galaxy Note and Sony Z3, and the headset and controls work fine.
Uninstalled Smartkey, emptied the data from and disabled Smart Connect, restarted, installed Degauss software, and tested - no dice.
Completely re-installed the phone with Sony Companion - no dice
Checked the 3,5 mm port for obstructions - nothing.
Power off, blasted port with precision cleaner, let dry, test - no dice.
Unfortunately I haven't found a co-worker with a 3 button headset for an Android phone, so I haven't been able to test that out. I also don't have a similar headset at home.
I would greatly appreciate any insight on what the problem might be? Thank you for your time.
Kimpsake said:
I just got my Degauss Labs 'Dual Driver' android headphones for my Z1 Compact. Problem is, the volume controls don't work. Volume up seems to work semi-well, but a volume down click results in a long consecutive press. I read some people have a similar problem with the Sony STH30-headphones, but I haven't come across a solution.
So far, I've:
Tried the headphones in a Galaxy Note and Sony Z3, and the headset and controls work fine.
Uninstalled Smartkey, emptied the data from and disabled Smart Connect, restarted, installed Degauss software, and tested - no dice.
Completely re-installed the phone with Sony Companion - no dice
Checked the 3,5 mm port for obstructions - nothing.
Power off, blasted port with precision cleaner, let dry, test - no dice.
Unfortunately I haven't found a co-worker with a 3 button headset for an Android phone, so I haven't been able to test that out. I also don't have a similar headset at home.
I would greatly appreciate any insight on what the problem might be? Thank you for your time.
Click to expand...
Click to collapse
Update:
Tried the headset in another Z1 Compact, and it works fine. Decided it's a hardware problem, since full reinstall didn't help.
Sent it to repairs, where they replaced the audio jack and side keyflex. Got it back, and the problem still persists. I guessed it is some deeper rooted issue, so I sent it back. Repairs gave up, and decided to pull the "didn't receive customers headset, cannot replicate"-card, so they didn't do anything to it. Will have to take it up with them again.