Related
I just installed the Leaked GPS Rom (when the phone boots it says "Test Only not for resale") The boot loader on it is Vogue100 I want to install 2.31 but it it gets to "updating rom image on your pda phone" screen it never progresses then gives me a connection error although usb is displayed on the bottom of the screen of the phone. Any help would be appreciated!
HeyRobi said:
I just installed the Leaked GPS Rom (when the phone boots it says "Test Only not for resale") The boot loader on it is Vogue100 I want to install 2.31 but it it gets to "updating rom image on your pda phone" screen it never progresses then gives me a connection error although usb is displayed on the bottom of the screen of the phone. Any help would be appreciated!
Click to expand...
Click to collapse
well its gonna say Vogu100 regardless. but have you tried resetting both the device and the comp you are using? what os is your comp running?
hmm cant think of much else just yet...keep us posted! and feel free to ask any other questions.
I believe I'm having the same issue. I can't get my phone to connect to activesync while cokes temporary(2.01?) bootloader is on. I tried using the sdcard method and my phone just says loading forever. Any help would be appreciated.
Hello everyone,
I have the same issue..with seranath http://android.modaco.com/index.php?s=&showtopic=307365&view=findpost&p=1297682
i use bootloader 0.80..
http://img195.imageshack.us/f/cimg52812.jpg/
could use some help here..... pleaaaaasee
koedil said:
Hello everyone,
I have the same issue..with seranath http://android.modaco.com/index.php?s=&showtopic=307365&view=findpost&p=1297682
i use bootloader 0.80..
http://img195.imageshack.us/f/cimg52812.jpg/
could use some help here..... pleaaaaasee
Click to expand...
Click to collapse
have you tried to press back button and then power to enter fastboot?
i did...but nothing happen
I have had then when i messed up rooting my phone, its not bricked. your recovery is messed up, follow this guide
http://forum.xda-developers.com/showpost.php?p=6710081&postcount=2
if step 2 does not do anything then just hold volume down and power then navigate to recovery.
keep trying till you can boot recovery it will work, thats what i did
Did you try running the RUU update while you are in this mode?
The USB port should be in hboot-usb mode.
Ronaldo_9 said:
I have had then when i messed up rooting my phone, its not bricked. your recovery is messed up, follow this guide
http://forum.xda-developers.com/showpost.php?p=6710081&postcount=2
if step 2 does not do anything then just hold volume down and power then navigate to recovery.
keep trying till you can boot recovery it will work, thats what i did
Click to expand...
Click to collapse
oke..I'll try, report later thanks for advice hope my phone working again
georgemv said:
Did you try running the RUU update while you are in this mode?
The USB port should be in hboot-usb mode.
Click to expand...
Click to collapse
im trying to Rooting but failure in step1
I had exactly the same thing when I try to root, just root again using Modaco's steps, then when you are done, a strange logo will appear, and for me it went back to stock 1.15 software.
koedil said:
oke..I'll try, report later thanks for advice hope my phone working again
Click to expand...
Click to collapse
Hii Ronaldo
I had a test step1 you told me..but still blank and the output :
"Erasing cache and rebooting in RUU mode..."
<waiting for device>
and have no access to bootloader or recovery!!
gregounech said:
I had exactly the same thing when I try to root, just root again using Modaco's steps, then when you are done, a strange logo will appear, and for me it went back to stock 1.15 software.
Click to expand...
Click to collapse
Oke ..I'll trying now. do you have access to bootloader or recovery?
btw thanks for advice..report later
koedil said:
Oke ..I'll trying now. do you have access to bootloader or recovery?
btw thanks for advice..report later
Click to expand...
Click to collapse
I had a test modaco root you told me..but still blank
and Still.. have no access to bootloader or recovery
can somebody help me..(
did you manage to fix your Desire?
koedil said:
I had a test modaco root you told me..but still blank
and Still.. have no access to bootloader or recovery
can somebody help me..(
Click to expand...
Click to collapse
Koedil,
Did you ever manage to fix your Desire? If you did, then how did you do it?
I have the same problem and am tearing out what little hair I have.
Any help would be appreciated.
Thanks,
Rich
I figured out a fix
If you haven't already fixed your Desire, then after some trial and error I came up with this fix (post #5) that worked for me.
Read it ....Hope our xda be better
Welcome all Huawei Acend G300 users, this is a full guide prepared by me which will help you unlock your bootloader and not only that but it will help you gain root access for system modifications and root required applications.
Click to expand...
Click to collapse
Keep in mind, this method is not confirmed working if you're running android 2.3.x [ Gingerbread ]. So do not use this if you're running it. Also dual sim ones aren't supported from what I see it tempers with the phone, I haven't tested it but many have reported it doesn't work on dual sims.
Lets get started shall we? Firstly I have gathered up some useful resources that will help you get started. Make sure you read this guide first, from top to bottom. Then continue. As you must have a clear understanding on what you are going to attempt. If you have any queries don't hesitate to ask on the thread itself.
Click to expand...
Click to collapse
I have performed these exact steps and have successfully unlocked my bootloader and rooted the phone. So if you're worried. Don't be. After attempting this I haven't noticed any issues either.
Okay, first of all you will need to download Unlockbootloader ---> View attachment unlockbootloader.zip
Once you have downloaded the said .zip extract the .exe file inside the .zip to your desktop.
Continue by turning on USB debugging on your G300. if its already switched on then skip the part below..
Go into Settings>Developer Options and tick the USB Debugging option.
Once its switched on, plug your phone to the computer using a USB cable.
So far you've downloaded Unlockbootloader, have switched USB debugging on, and your phone is connected to your PC.
Now run the .exe file you have just extracted. Click "Root" and let it do everything, it will prompt up with a few warnings saying don't use your keyboard because CMD is running.
Once the setup finishes, your phone should be rooted.
Head into the app drawer, and if you see "SuperUser" you're now officially rooted.
Reboot your phone to finalize the rooting and exploits.
Ok, now for the bootloader.
Once your phone is on, and connected again to the PC with debugging mode on, run the .exe file again and this time click "Unlock BootLoader".
Wait for it to do its job, once done reboot again and you now have a Stock Rooted and Bootloader unlocked ICS phone.
Click to expand...
Click to collapse
If this Guide helped, don't hesitate to hit the thanks button.
I am trying to root my Huawei g300, (from vodaom uk, unlocked) have followed your guide BUT I Have No usb debugging option anywhere under settings. Why? Still awaiting official ics update from vodaom / Huawei, impatiently.
Thanks jon
jon sawyer said:
I am trying to root my Huawei g300, (from vodaom uk, unlocked) have followed your guide BUT I Have No usb debugging option anywhere under settings. Why? Still awaiting official ics update from vodaom / Huawei, impatiently.
Thanks jon
Click to expand...
Click to collapse
Settings>applications>development>usb debug
Sent from my HUAWEI U8815 using Tapatalk 2
Can't Root
When I try and root my device is says "ROOT failure, please check the driver" what should I do?
EmmanuelA said:
When I try and root my device is says "ROOT failure, please check the driver" what should I do?
Click to expand...
Click to collapse
Hi, assuming you have installed the g300 adb drivers, once the device is hanging on the boot logo and you connect the usb cable. You need to wait for windows to fully the load the adb driver before you use the unlockbootloader.exe program.
EmmanuelA said:
When I try and root my device is says "ROOT failure, please check the driver" what should I do?
Click to expand...
Click to collapse
What you have to do is,turn on debug, then power off device fully by pulling off battery then putting it back in, now you must power on by golding the volume down button and power button at the same time, this should get it to be stuck on the huawei logo screen, now plug in your USB cable and wait for you PC to detect the phone and it should automatically install the devices driver's, one its done the now open the folder and run .BAT files, If you are experiencing problems here's a link for another guide : View
Hi,
After the "Unlock BootLoader", my phone doesn't boot. When the logo appears it stars to reboot again and never goes beyond that.
Any ideas ? Have I killed it ?
biscuitpt said:
Hi,
After the "Unlock BootLoader", my phone doesn't boot. When the logo appears it stars to reboot again and never goes beyond that.
Any ideas ? Have I killed it ?
Click to expand...
Click to collapse
Dou you have ics installed or gb. If gb look into my other post above urs.
Sent from my HUAWEI U8815 using Tapatalk 2
krishneelg3 said:
Dou you have ics installed or gb. If gb look into my other post above urs.
Sent from my HUAWEI U8815 using Tapatalk 2
Click to expand...
Click to collapse
I have gb, but the problem is when i re-insert the battery and power on the phone with vol down key pressed, it keeps rebooting, doesn't stay at the logo
biscuitpt said:
I have gb, but the problem is when i re-insert the battery and power on the phone with vol down key pressed, it keeps rebooting, doesn't stay at the logo
Click to expand...
Click to collapse
This is for ics mate.not gb.
Go to modaco
Ways to fix. Flash ota update b927 ...
Sent from my HUAWEI U8815 using Tapatalk 2
bootloop :/
Hi i tried this method and i dont know how it happened but now my phone is in a boot loop and i have no custom recovery, i cannot access anything just constant boot loop, big trouble,
does anyone have any idea?
thanks
evotaz said:
Hi i tried this method and i dont know how it happened but now my phone is in a boot loop and i have no custom recovery, i cannot access anything just constant boot loop, big trouble,
does anyone have any idea?
thanks
Click to expand...
Click to collapse
Turn ur phone completely off. By pulling out battery then apply the battery again.
Now hold volume down and power button and it should be in boot loader mode. If ur logo is stuck well this is in boot loader if not and it continues well.. idk
Sent from my Ascend G300 using Tapatalk 2
Hello krishneelg3,
I have tried a method on http://huaweig300.com but I'm stuck with the problem.
Installing USB drivers/Root/Backup IMEI went OK. Then by mistake I skipped the Step on page 5. Check Baseband and kept continued by Bootloader & ClockworkMod all went OK until the step 10. On page 6. After executing BootloaderG300.exe the phone rebooting cyclically, My operator screen appear for a approximately one second and the phone restarts again. How to resolve the problem and is there any hope to return to official ROM?
Thanks in advance, I really appreciate it.
petar17 said:
Hello krishneelg3,
I have tried a method on http://huaweig300.com but I'm stuck with the problem.
Installing USB drivers/Root/Backup IMEI went OK. Then by mistake I skipped the Step on page 5. Check Baseband and kept continued by Bootloader & ClockworkMod all went OK until the step 10. On page 6. After executing BootloaderG300.exe the phone rebooting cyclically, My operator screen appear for a approximately one second and the phone restarts again. How to resolve the problem and is there any hope to return to official ROM?
Thanks in advance, I really appreciate it.
Click to expand...
Click to collapse
What was ur baseband and were u running gingerbread?
If u r on official ics then this guide is for u, if not notify me.
PS : If you are running Gb I refer you to look into this guide, as long as your phone can boot into bootloader your fine, and I'm sure it will boot into Bloader mode : http://www.modaco.com/topic/353386-how-to-root-your-huawei-ascend-g300-for-windows-mac-and-linux/
Thanks krishneelg3,
my baseband is 109808, and I'm running GB.
The problem is that I don't know if I'm in a Bootloader mode when I see a pink screen?
When I press VOLUME DOWN + POWER it starts same as when I press POWER, first logoo (in my case picture of my operator) it lasts for about few seconds, then phone reboots and start doing it cyclically.
The other thing is that, when I press VOLUME DOWN + VOLUME UP + POWER, it then turns into a pink screen.
In that state (pink screen), when I plug in my phone to my PC, PC recognize my phone without reading sd card or internall memory.
So what should I do?
Thanks man, really appreciate it!
Guys,
I solved the problem.
I've just followed the instructions in step 5. on the site http://huaweig300.com and put a new update.app (1 KB) and copy it to the dload. After that I've used main dload (ICS folder, aprox abot 600 MB) and everything updated and installed successfully.
Thanks.
p.s. if anyone has or had the same problem, do not hesitate to ask.
hi all
sorry to hijack the thread
I have just got my son an ascend 300 which is locked to vodafone
its on android 2.3.6
the build number is
u881v100r001c02b892
i have a download of HDU88151079V100R001C00B934 which is the ICS but i dont think that will work for my build
ideally i want ICS but dont mind too much waiting.
but i do want to be able to get of all the bloatware.
I guess i need to root to do this.
the link to the modaco site is down and it seems this is for those lucky enough to be on ICS
would i be better off upgrading to ICS then following the method above or would i be better finding a method to root under gb (If so where)
many thanks
stringman said:
hi all
sorry to hijack the thread
I have just got my son an ascend 300 which is locked to vodafone
its on android 2.3.6
the build number is
u881v100r001c02b892
i have a download of HDU88151079V100R001C00B934 which is the ICS but i dont think that will work for my build
ideally i want ICS but dont mind too much waiting.
but i do want to be able to get of all the bloatware.
I guess i need to root to do this.
the link to the modaco site is down and it seems this is for those lucky enough to be on ICS
would i be better off upgrading to ICS then following the method above or would i be better finding a method to root under gb (If so where)
many thanks
Click to expand...
Click to collapse
OK get the official pics update b927* must be that build.
After its done downloading, extract its contents to your memorycard of the phone.
Make sure the update.app is in the root of SD card .
Then power off phone, remove battery re apply battery and hold the three buttons "volume up, volume down and the power button" until a screen pops up it will then install the stock ics once its done it'll reboot twice.
If only one it doesnt matter.
Setup the phone. Now to install b934 or newer versions use cwm for dazzozos repacks or the update force method. But I advice u to look for help on modaco. Thanks.
Modaco name : krishang3
krishneelg3
Thanks for that by b927* you are referring to a different version of HDU88151079V100R001C00B934 ?
where would i be able to get this from?
so this would give me the stock ics
what is the advantage of then installing HDU88151079V100R001C00B934 ?
Thanks
stringman said:
krishneelg3
Thanks for that by b927* you are referring to a different version of HDU88151079V100R001C00B934 ?
where would i be able to get this from?
so this would give me the stock ics
what is the advantage of then installing HDU88151079V100R001C00B934 ?
Thanks
Click to expand...
Click to collapse
Your on gingerbread so your baseband Is 109808 and if u flash any b934+ stock using the combinations say goodbye to your phone. I did that to my brothers and it bricked.
So to get to ice you must install b927 version of ics then your baseband will change to the new one *2030* now you can flash any b934+ stocks because you now have the new baseband.
Go to modaco and enter the G300 forums and look at the first dew pages all the info and guides you need. Procedure is simple.
I think I might have softbricked my device... I am stuck in a boot loop in my recovery basically... Installed a good rom, install was clean...
I see "Secure booting error" in top left when I turn my device on....
here try this:
http://forum.xda-developers.com/show...1&postcount=70
or this
http://forum.xda-developers.com/show...&postcount=268
whichever works for you
cynosure4sure said:
here try this:
http://forum.xda-developers.com/show...1&postcount=70
or this
http://forum.xda-developers.com/show...&postcount=268
whichever works for you
Click to expand...
Click to collapse
When I type adb reboot. Nothing happens...
Weird... I repeated the steps again (I've done them all multiple times) and now my devices wants to boot... Thank god!
zander145 said:
When I type adb reboot. Nothing happens...
Weird... I repeated the steps again (I've done them all multiple times) and now my devices wants to boot... Thank god!
Click to expand...
Click to collapse
after executing the commands just reboot the device and it will boot into ROM
could someone please update the links? I really really need this
xfox said:
could someone please update the links? I really really need this
Click to expand...
Click to collapse
I managed to see the post, but still trying to ail it, if anyoine has some tips please hhhhhelp
Try this instruction
zander145 said:
I think I might have softbricked my device... I am stuck in a boot loop in my recovery basically... Installed a good rom, install was clean...
I see "Secure booting error" in top left when I turn my device on....
Click to expand...
Click to collapse
I have CWM boot loop ATT E980 , i follow this instruction work fine.
http://forum.xda-developers.com/showthread.php?t=2302660
I tried to root my phone last night, but I stop midway of the process because of some problems like "phone not turning on with no vibrate at all when I restart after its stuck to inverted white screen, when I luckily turn it back on but it bootloops".
Heres the details:
I run unlock.bat then after its done it reboots with inverted white screen with logo then I run restore.bat and after it restart there is no sign of warning "failed verification" until it fully loads up, I go back to fastboot again to flash TWRP after running twrp.bat it says "flash succesfully" and the program closed by itself, then I go to recovery mode after rebooting I saw android error just like how it use to be. I press power button + volume up then release the volume up then I see the stock recovery (which it should be TWRP since I've done flashing it).
I think that my bootloader is still locked since there's no warning display of "failed verification". So I repeat the steps again after running unlock.bat, it reboots and the screen is inverted but it's stuck up to white logo, I waited for a while but nothing happens so I tried to reboot my phone "holding power button (power off)" when power on, it wont turn on, no vibration just a sound on laptop "connected sound and disconnected sound" I tried to power it on many times but still no luck I got panicked, jittery walking back and forth :crying:. Then I disconnect the usb cable and I tried to turn it on and suddenly I feel the vibration on my phone then it boots up but still stuck in white screen then it restart after keeping it for too long (while watching videos related to my problem)...
then my friend here said "ohh it bootloop" he read the instruction and he said to try this
"FAQ 1. Stuck at white screen with asus logo?
Sol. a) White screen means you are unlocked (action of unlock.bat), so you may give a try to restore.bat in fastboot mode."
and it solve my problem my phone is working again ... But I want to continue to root it but I'm afraid which steps I should go next, I still don't see the warning "failed verification" after my phone boots up and works again... I need HELP thank you
I also got question: is my bootloader unlock since it inverted white screen? or it still locked since there no sign of warning "failed verification"?
@PrinceLys
What is your build number in settings ,about phone ?
timbernot said:
@PrinceLys
What is your build number in settings ,about phone ?
Click to expand...
Click to collapse
ahmm I think this?
model number: ASUS_Z00AD
android version: 6.0.1
software information: WW_4.21.40.223_20161216
P.S my phone is back on working state.
I just don't know if I can proceed to root after the incident. I don't know, I just want to make sure that my bootloader is still unlocked after what I've done (it did white screen with black asus logo) or.... it doesn't unlocked at all since I don't see this warning "your device has failed verification and may not work properly." (I've attach screenshot from the video tutorial)
I tried to manualy check if my bootloader is really on unlock state but I can't using these methods
method 1: on device’s dialer dial *#*#7378423#*#* (failed)
method 2: fastboot oem device-info (failed)
my recovery it still on stock recovery even after I flash twrp
btw guide source: https://forum.xda-developers.com/zenfone2/general/root-install-xposed-marshmallow-6-0-1-t3456443
Q: should I still continue to flash twrp until it install?
Theres 2 bootloader unlock tools in general section , one is automatic
Read this from start to finish before doing anything.. also have on another device to refer to as you are doing the steps also download the ROM and gapps you want and put on SD card before you start even if you have to download them and move them from PC to SD card. https://plus.google.com/113955136844726294013/posts/aLJdNZN3g8q
Sent from my ASUS_Z00A using Tapatalk
timbernot said:
Theres 2 bootloader unlock tools in general section , one is automatic
Click to expand...
Click to collapse
I'm going to look for it... thanks
musicman5844 said:
Read this from start to finish before doing anything.. also have on another device to refer to as you are doing the steps also download the ROM and gapps you want and put on SD card before you start even if you have to download them and move them from PC to SD card. https://plus.google.com/113955136844726294013/posts/aLJdNZN3g8q
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
I've haven't fully read the instruction maybe tomorrow I will read it.
I just downloaded the files early and look into it... it seems like the versions are kinda latest (I don't know much about the droidboot ver. but I just look at the number on it "the higher the latest /heh") also the twrp is 3.0.3.
the ones that I used are all in package and it was 3.0.2 so I kinda go for the link you gave me
Thanks :good:
Hi,I've had the same situation,but it is solved now.If you have any problem,maybe I can help you .
nanobrain---- said:
Hi,I've had the same situation,but it is solved now.If you have any problem,maybe I can help you .
Click to expand...
Click to collapse
(I've finally think my bootloader is unlock after all.)
btw, did you succesfylly flash twrp?
Mine didn't flash (using twrp.bat), I guess I will try it again tonight if it fails again im gonna dl twrp from official and manually flash it.