Develop Bugs

HCT Desire Bricked? HTC logo and 4 exclamation marks

Hello everyone,
I have the same issue..with seranath http://android.modaco.com/index.php?s=&showtopic=307365&view=findpost&p=1297682
i use bootloader 0.80..
http://img195.imageshack.us/f/cimg52812.jpg/
could use some help here..... pleaaaaasee

koedil said:
Hello everyone,
I have the same issue..with seranath http://android.modaco.com/index.php?s=&showtopic=307365&view=findpost&p=1297682
i use bootloader 0.80..
http://img195.imageshack.us/f/cimg52812.jpg/
could use some help here..... pleaaaaasee
Click to expand...
Click to collapse
have you tried to press back button and then power to enter fastboot?

i did...but nothing happen

I have had then when i messed up rooting my phone, its not bricked. your recovery is messed up, follow this guide
http://forum.xda-developers.com/showpost.php?p=6710081&postcount=2
if step 2 does not do anything then just hold volume down and power then navigate to recovery.
keep trying till you can boot recovery it will work, thats what i did

Did you try running the RUU update while you are in this mode?
The USB port should be in hboot-usb mode.

Ronaldo_9 said:
I have had then when i messed up rooting my phone, its not bricked. your recovery is messed up, follow this guide
http://forum.xda-developers.com/showpost.php?p=6710081&postcount=2
if step 2 does not do anything then just hold volume down and power then navigate to recovery.
keep trying till you can boot recovery it will work, thats what i did
Click to expand...
Click to collapse
oke..I'll try, report later thanks for advice hope my phone working again

georgemv said:
Did you try running the RUU update while you are in this mode?
The USB port should be in hboot-usb mode.
Click to expand...
Click to collapse
im trying to Rooting but failure in step1

I had exactly the same thing when I try to root, just root again using Modaco's steps, then when you are done, a strange logo will appear, and for me it went back to stock 1.15 software.

koedil said:
oke..I'll try, report later thanks for advice hope my phone working again
Click to expand...
Click to collapse
Hii Ronaldo
I had a test step1 you told me..but still blank and the output :
"Erasing cache and rebooting in RUU mode..."
<waiting for device>
and have no access to bootloader or recovery!!

gregounech said:
I had exactly the same thing when I try to root, just root again using Modaco's steps, then when you are done, a strange logo will appear, and for me it went back to stock 1.15 software.
Click to expand...
Click to collapse
Oke ..I'll trying now. do you have access to bootloader or recovery?
btw thanks for advice..report later

koedil said:
Oke ..I'll trying now. do you have access to bootloader or recovery?
btw thanks for advice..report later
Click to expand...
Click to collapse
I had a test modaco root you told me..but still blank
and Still.. have no access to bootloader or recovery
can somebody help me..(

did you manage to fix your Desire?
koedil said:
I had a test modaco root you told me..but still blank
and Still.. have no access to bootloader or recovery
can somebody help me..(
Click to expand...
Click to collapse
Koedil,
Did you ever manage to fix your Desire? If you did, then how did you do it?
I have the same problem and am tearing out what little hair I have.
Any help would be appreciated.
Thanks,
Rich

I figured out a fix
If you haven't already fixed your Desire, then after some trial and error I came up with this fix (post #5) that worked for me.

Read it ....Hope our xda be better

[Q] Think I bricked it from flashing!! Please help!!

Pretty sure that I screwed things up pretty good and its either bricked or I think stuck in fastboot every time it turns on!! Here's what I did:
So I downloaded the newest rooted rom (51.1.4.0_514006420 updated) from aftvnews.com...
not very patient so put it on an external drive and copied it to internal sd on the FireTV...
went into CWM (6.0.5.1.4a) and tried to flash it but got an error that it failed, wiped cache/dalvik just because and rebooted...
It kept on booting into CWM and finally realized I had another file on the sd just named rom - assuming that it was the version I was on before (51.1.3...) so wiped data/factory reset and flash that...
Immediately tried to flash the 51.1.4 over that - like an idiot - and that failed again...
wiped data/factory reset and tried to flash 51.1.3 and that failed...
wiped data/factory reset and rebooted...
Now I'm stuck on white Amazon logo and cant do anything with it!!
Any ideas would be greatly appreciated!!!! Is there any way to force it into recovery when it starts up

Mike3.14159 said:
Now I'm stuck on white Amazon logo and cant do anything with it!!
Any ideas would be greatly appreciated!!!! Is there any way to force it into recovery when it starts up
Click to expand...
Click to collapse
Does anyone know if the plain white amazon logo means it's stuck in fastboot??
If so, has anyone had any luck attaching a male-to-male usb to the back and do any fastboot commands??
If I can do a "fastboot reboot recover" then I can possibly fix it from CWM...

Mike3.14159 said:
Does anyone know if the plain white amazon logo means it's stuck in fastboot??
If so, has anyone had any luck attaching a male-to-male usb to the back and do any fastboot commands??
If I can do a "fastboot reboot recover" then I can possibly fix it from CWM...
Click to expand...
Click to collapse
Have you tried this:
http://www.aftvnews.com/how-to-unbr...ry-mode-and-factory-reset-the-amazon-fire-tv/

cd2022 said:
Have you tried this:
http://www.aftvnews.com/how-to-unbr...ry-mode-and-factory-reset-the-amazon-fire-tv/
Click to expand...
Click to collapse
Yeah, tried that like a dozen times before I posted again last time. Seems like that will only work if you soft bricked and the rom just wont fully boot. They were talking about the 'color logo' which I'm not even getting that far - gets hung up on the initial white logo. Appreciate the try though, thanks!

Mike3.14159 said:
Yeah, tried that like a dozen times before I posted again last time. Seems like that will only work if you soft bricked and the rom just wont fully boot. They were talking about the 'color logo' which I'm not even getting that far - gets hung up on the initial white logo. Appreciate the try though, thanks!
Click to expand...
Click to collapse
To quote the CWM post...
[size=+2]If something fails to flash DO NOT reboot. Try again and/or retransfer the file over adb.[/size]
Click to expand...
Click to collapse
If your /system is corrupt, it's not gonna boot. You can try the sysrq trick, but I don't think anyones ever been able to make that work with a bad /system.

Not sure what the 'sysrq' trick is but I will look it up and see what I can do, thanks! Saw on aftvnews late yesterday that the newest ota - after being rooted - did something crazy to yours so was actually waiting to see what had happened to yours and if you were able to get it back right then was hoping I could maybe learn some trick from that haha

Have you managed to fix this? i'm also stuck on the white logo

Looks like white logo without going to the colored logo means hard brick. Any USB attached will not work. There is no power coming out.
I wonder if there is a way to open up the unit and reflash the hardware from there.

Can someone please help me

I was trying to update my phone and something most likely went wrong. Then the update installed and screwed up my phone. When I turned it on it stayed on the startup for so long. I tried to clear cache through the bootloader, but now it shows the android screen of death except it flashes. This occurs even outside the bootloader.
I am rooted with stock os.
Thanks in advance to whoever helps

Flash it with the original firmware

anfalanl said:
Flash it with the original firmware
Click to expand...
Click to collapse
Yup, same thing happened to me, I had to reflash it to stock firmware.

How would i flash
Magister54 said:
Yup, same thing happened to me, I had to reflash it to stock firmware.
Click to expand...
Click to collapse
Hey, thanks for the response.
Could you please elaborate on how I would do this. Because I do not understand how to do this if the bootloader doesn't work.
Thanks, your response and input means alot

Take the firmware from Asus website, for me I took UL-Z00A-WW-2.19.40.22-user.zip
Boot the phone in bootloader and try to go in the recovery screen, it took me a lot of tries to get in it!!!
From here you can select "insall update from ADB"
From your PC you do a "adb sideload UL-Z00A-WW-2.19.40.22-user.zip"

Magister54 said:
Take the firmware from Asus website, for me I took UL-Z00A-WW-2.19.40.22-user.zip
Boot the phone in bootloader and try to go in the recovery screen, it took me a lot of tries to get in it!!!
From here you can select "insall update from ADB"
From your PC you do a "adb sideload UL-Z00A-WW-2.19.40.22-user.zip"
Click to expand...
Click to collapse
When i try to do this, i see the error sign but it is flashing

hudasameer450 said:
When i try to do this, i see the error sign but it is flashing
Click to expand...
Click to collapse
That's normal. When you get the error sign when booting into stock recovery, hold power down and press volume up and quickly release both buttons at the same time. If done correctly recovery menu will pop up and then you can start actually flashing.

Flashing
does this still work if the screen is flashing, because I tried before and it did not work, maybe I pressed it wrong or there is some other issue.
Thanks

[HELP] Hardbricked G3... :(

I am Done.
It's not booting, it shows LG splash screen and after some seconds dies.
I tried everything...
my last resort was using LG Flash Tool and flashing the .tot file...
First time, it went good, even reached where the 2 Factory Reset Status, where it froze though. Followed a guide saying I need to select Board DL, tried but no good.
Now, when trying to flash again, and reaching where the phone has to reboot, it shows the LG Splash screen and dies again, sometimes, it shows the Demigod Crash Handler saying either Kernel Crash or Tz Crash.
No one seems to want to help ...

What is version of twrp? If its twrp 8.7.0 you can flash another kernel throw twrp. Im not develloper. Only for your risk.
Sorry for my nad english.
Edit: im not read fully of your post sorry but you can try it

Frutak said:
What is version of twrp? If its twrp 8.7.0 you can flash another kernel throw twrp. Im not develloper. Only for your risk.
Sorry for my nad english.
Edit: im not read fully of your post sorry but you can try it
Click to expand...
Click to collapse
It is indeed 2.8.7.0! I will remember your post, hoping someone more experienced approve your solution! Thank you so much! :angel:

Its work? lol

Frutak said:
Its work? lol
Click to expand...
Click to collapse
Did not try yet, haha! But only waiting if someone thinks your solution is good!

What about flash rom over sideload ?
Its same step like on HTC, but you have LG G3.
TRy This:
https://www.youtube.com/watch?v=Oo2cErfUSSE

Frutak said:
What about flash rom over sideload ?
Its same step like on HTC, but you have LG G3.
TRy This:
https://www.youtube.com/watch?v=Oo2cErfUSSE
Click to expand...
Click to collapse
Well now I can't boot to recovery -_- sometimes it boots to recovery, sometimes it just don't!
I could try this indeed! But still dunno if it will work without enabling the USB Debugging

Died after CM flash

Installed CM and Gapps.
Rebooted the device and at the optimizing screen the phone hangs. Reboot again and hangs on the Oneplus Logo.
Reboot again and now the phone won't turn on..
Laptop or My Macbook won't recognize the phone..
Help me.

Check this thread out which may help you out.
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700

daleski75 said:
Check this thread out which may help you out.
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Click to expand...
Click to collapse
But the phone is not recognized by my laptop, so i think it won't work..

yooouuri said:
But the phone is not recognized by my laptop, so i think it won't work..
Click to expand...
Click to collapse
Follow the tuto, the method 2 is infallible. i was hard-bricked mi OP3 some times and following that thread i resurrected the terminal.
Seriously, is magic magic Technology.
Best Regards.

Wynztech said:
Follow the tuto, the method 2 is infallible. i was hard-bricked mi OP3 some times and following that thread i resurrected the terminal.
Seriously, is magic magic Technology.
Best Regards.
Click to expand...
Click to collapse
The phone still dont get recognized... I think the only option is to submit a ticket

lol how did you manage to screw up the flashing? have you rooted?

corrupt1234 said:
lol how did you manage to screw up the flashing? have you rooted?
Click to expand...
Click to collapse
Yes i unlocked my bootloader.
I installed CM, wiped cache/dalvik. Installed gapps and again cache/dalvik. Rebooted the Phone but the boot just hangs. Turned the phone off and it wont get on..
In my point of view i did nothing wrong..

yooouuri said:
Yes i unlocked my bootloader.
I installed CM, wiped cache/dalvik. Installed gapps and again cache/dalvik. Rebooted the Phone but the boot just hangs. Turned the phone off and it wont get on..
In my point of view i did nothing wrong..
Click to expand...
Click to collapse
Yes you did. Have you not read the instructions on the first post of every ROM threads? Btw, so sorry with you device tho. Hopefully you can bring it back to life.

corrupt1234 said:
Yes you did. Have you not read the instructions on the first post of every ROM threads? Btw, so sorry with you device tho. Hopefully you can bring it back to life.
Click to expand...
Click to collapse
What did i do wrong in your oppining?