I recently tried installing probam rom v4.4.9 from xda threads and followed all the instructions. everything worked fine up until the thread said to reboot the phone once more, anyway long story short i rebooted it and it was stuck at the galaxy note 2 logo (white letters black background) it was stuck like this for around 5-10mins at which point i pulled the battery and decided to go back to using rootbox rom.
Is their anyway i can install probam rom without this happening again?
I've also tried downloading and installing probam version 4.5.0 from their own website following the instructions given on xda, but once its booted from twrp it'll work until i have to reset, at which point i am back to square one, being stuck at the galaxy note 2 logo.
I have also tried installing pacman rom because i would like to use a 4.3 rom but the same thing happens, the rom will work fine until i have to reboot or it randomly reboots and gets stuck at the note 2 logo.
the only roms i am able to use without this happening are moon rom v10, rootbox rom and carbon rom, only thing is i would like to use different roms and check out their features, but i am somewhat limited to what i can use due to the above problem. Does anyone else have this issue? If so how did you get past it?
Haven't had the problem myself. Did you also format the system partition and not just wipe it? Wipe the data partition?
Perhaps you can try installing a stock firmware through Odin, reinstall your recovery. That might clean some thing up that keep you from booting in probam rom.
Sent from my GT-N7100 using xda app-developers app
Machiel187 said:
Haven't had the problem myself. Did you also format the system partition and not just wipe it? Wipe the data partition?
Perhaps you can try installing a stock firmware through Odin, reinstall your recovery. That might clean some thing up that keep you from booting in probam rom.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
through twrp i went to wipe, format data typed yes, after this i swiped to factory reset then advanced wiped clicking cache, dalvik cache and system, if i've done this wrong could you please tell me how to do it the right way as i'm not really sure how to, thanks in advance :highfive:
i did what you told me to and flashed a stock rom through odin, went through the whole rooting process and flashed probam 4.5.0 again and this time it worked!! But no signal at all
Hello, my name is Sebastian. First time I post here. I´ve been reading a lot here in Xda, but no posting before.
I have a little question for you all, experts, and I think its kinda simple but I can´t figure it out.
My N7100 was running fine with a stock rom (Android 4.1) and then flashed a custom rom, I think Phoenix Rom (Android 4.1) and working very fine too..
Now I wanted to flash a newer rom, and I've tried a lot, with no good results:
PHOENIX ROM V15 (ANDROID 4.3)
DR KETAN CUSTOM ROM V6.1 (ANDROID 4.3)
DN3 V3.1 (ANDROID 4.3)
HURRICANE V6.0 (ANDROID 4.3)
I can install them all very fine, but when I restart the phone, it get stuck at the Galaxy Note II N7100 logo.
My CWM is version 6.0.3.7 and I`m using Philz touch 5.15.0 (I've tried Philz touch 6 with the same results).
I tried installing a new radio with Odin, version DDUMJ9 Modem and still the same result, stuck at boot logo.
Its weird cause I can install very fine the custom rom PROBAM 5.0 (Android 4.3) and it don´t get stuck at the boot logo, and the system runs very fine. I also can install custom rom REVOLUTION HD 19.0 (Android 4.1 based).
So, my problem its with Android 4.3 and most of the custom roms based in that system that are holded here in Xda.
What can i do? What I'm doind wrong? What is missing?
I'll be very grateful for any help that you can give me.
Best regards.
you stuck at bootloader..what bootloader you use ?
try flash mj5 bootloader
sora9009 said:
you stuck at bootloader..what bootloader you use ?
try flash mj5 bootloader
Click to expand...
Click to collapse
Ok I will try that and post later...any link to download MJ5 bootloader?
Thank you
Ok I flashed MJ5 bootloader using joeldroid instructions (post found here in Xda) via Odin.
Then went to recovery, wipe cache, wipe full/factory reset and installed Phoenix ROM v15 and....still no luck, I'm stuck at the boot logo.
here its the post from joeldroid:
http:// forum. xda-developers .com/ showpost.php?p=46901976&postcount=741 (without spaces)
melankoly said:
Ok I flashed MJ5 bootloader using joeldroid instructions (post found here in Xda) via Odin.
Then went to recovery, wipe cache, wipe full/factory reset and installed Phoenix ROM v15 and....still no luck, I'm stuck at the boot logo.
here its the post from joeldroid:
http:// forum. xda-developers .com/ showpost.php?p=46901976&postcount=741 (without spaces)
Click to expand...
Click to collapse
Phoenix ROM V15 has some issues installing first time.. try complete wipe (keep installation zip on external SD card and format internal SD card in order to clean every thing) then try couple of times... alos select less apps and mods.. you can download app later..
I was on phoenix and gave me troubles installing but was able to in 2-3 attempts always...
ameyamg said:
Phoenix ROM V15 has some issues installing first time.. try complete wipe (keep installation zip on external SD card and format internal SD card in order to clean every thing) then try couple of times... alos select less apps and mods.. you can download app later..
I was on phoenix and gave me troubles installing but was able to in 2-3 attempts always...
Click to expand...
Click to collapse
Thanks a lot man, but I've tried to install Phoenix ROM like...7 times? And before every installation I do the following:
1. Wipe dalvik cache
2. Wipe cache
3. Wipe cache/full factory reset
4. Wipe and clean to install a new ROM (Philz touch option)
And then I perform the installation. Like I said in my first post this is happening to me with every Android 4.3 custom ROM, not just Phoenix ROM.
Do you have any other idea? Thanks in advance.
Best regards.
from what you said,you only do factory reset before install.
did you do factory reset after install ?
sora9009 said:
from what you said,you only do factory reset before install.
did you do factory reset after install ?
Click to expand...
Click to collapse
Yes I've done factory reset to every installation I've made, and I even done it more than one time several times.
I did a new test, I formatted the internal SD and did all the wipe steps and tried to install Dr Ketan ROM (android 4.3 based) with no luck.
After all the new tests I did, finally decided to go back to Android 4.1 and flashed Revolution HD 19.0 and now my phone is working flawlessly.
What is missing in my phone to be able to run Android 4.3? I've seen other people with the same problem, but none seems to give and straight answer.
Here's is an example of the same problem:
http:// forum.xda-developers.com / showthread.php?t=2556414
melankoly said:
Yes I've done factory reset to every installation I've made, and I even done it more than one time several times.
I did a new test, I formatted the internal SD and did all the wipe steps and tried to install Dr Ketan ROM (android 4.3 based) with no luck.
After all the new tests I did, finally decided to go back to Android 4.1 and flashed Revolution HD 19.0 and now my phone is working flawlessly.
What is missing in my phone to be able to run Android 4.3? I've seen other people with the same problem, but none seems to give and straight answer.
Here's is an example of the same problem:
http:// forum.xda-developers.com / showthread.php?t=2556414
Click to expand...
Click to collapse
hurmm..this is weird..
why don't you try mj5 leak stock rom..since mj5 leak is a stock rom..i don't think you will face any problem..
after done mj5 flashing, apply patch from here then flash custom rom.
if that also not working, i dunno what wrong with your phone.
sora9009 said:
hurmm..this is weird..
why don't you try mj5 leak stock rom..since mj5 leak is a stock rom..i don't think you will face any problem..
after done mj5 flashing, apply patch from here then flash custom rom.
if that also not working, i dunno what wrong with your phone.
Click to expand...
Click to collapse
Ok I will try that and I will comeback to post my results.
I will use this guide from Dr Ketan if anyone need the same as me:
http:// forum.xda-developers.com / showthread.php?t=2500823
Best regards
melankoly said:
Thanks a lot man, but I've tried to install Phoenix ROM like...7 times? And before every installation I do the following:
1. Wipe dalvik cache
2. Wipe cache
3. Wipe cache/full factory reset
4. Wipe and clean to install a new ROM (Philz touch option)
And then I perform the installation. Like I said in my first post this is happening to me with every Android 4.3 custom ROM, not just Phoenix ROM.
Do you have any other idea? Thanks in advance.
Best regards.
Click to expand...
Click to collapse
Have you tried zoot's script mega wipe ?
Android 4.3 I notice there's a change on the usb internal storage folder. If the MJ5 bootloader you have tried already, you can try this megawipe. It will wipe very clean your internal storage. Don't worry, it won't wipe your EFS
I always use this script everytime I want to jump to new Android base, and so far never give me a problem.
Good luck!
Sent from the corner of this rounded earth.
You must use a Super Wipe script before the factory reset when installing a 4.3 Rom for the first time.
sent from somewhere
Agree because they change the partitioning.
Sent from the corner of this rounded earth (N7105 v4.3, powered by LionROM)
You can Flash leaked 4.3 mi6 rom via pc odin and it will automatically wipe your all data and int storage. You still will have old boot loader. After that,you can try any 4.3 custom rom.
Sent from my GT-N7100 using Tapatalk
was on software D with stock rom 4.4.2.. I am able to root.. and then able to get get TWRP for stock 4.4.2 install. So now I have custom recovery.
So I had the dimming issues and all fingers point to downgrading to stock 4.2.2 for ROM compatibility. So found the files to to downgrade to 4.2.2 with version of TWRP 2.7.0.1. So that seems to work. I don't get dimming issues with the LG boot screen comes up for example (my assumption that I have 4.2.2. installed now).
Now any ROM I throw at it, Slimkat, Mahdi, Pacman, CM11, it either freezes at boot and/or freezes in a few seconds once it's booted and I can swipe around in the OS. I tried wiping cache, dalvik, data, system, internal SD hoping that help install the rom cleanly, but still no go..
Any ideas? Am I missing something?
Thanks in advance.
i had tried flashing frost kernel for i9082 samsung galaxy grand duos on which cm12 lollipop was installed but while installing the kernel, it got aborted so i tried 3 times more but no use after that i tried restoring my system from the cwm backup but it did not go ahead after boot animation and then i tried to reinstall the rom but no use the same problem occured and it stopped after the boot animation........and now i m watching the arrow on the cm symbol revolving since the last 2 hours...........while flashing iwiped the data,i wiped the cache and the dalvik cache......urgent help required...
Hi
I have installed dozens of roms on my samsung galaxy grand duos.
But for whatever reason, every time i try to install a custom rom i get stuck on the samsung logo.
I have formatted the file system, cleared cache and the dalvik cache.
I am using CWM but have tried TWRP but had no luck.
Every time i get this samsung logo boot loop i just restore stock rom with odin and then i am back to jelly bean
I am trying to install cm12.1 and using micro Gapps.
I have installed this rom flawlessly before, but it doesn't wanna work now
Thanks