Don't have LTE, so I created an APN for phone, gives me faster speeds with ATT and lets me use Onlive (blocked using the original APN). Noticed however visual voicemail only works with the LTE APN. any way to add it to my custom one?
Don't have a response to your question but I'm curious how you got the new APN to stick? On mine when I created another APN but it just keeps on defaulting to the "pta" APN.
My understanding visual voice mail is exclusively for LTE network. In fact, if you switch to LTE plan and go back to regular plan, you might endup with disabled voice mail.
HJZS2K said:
Don't have a response to your question but I'm curious how you got the new APN to stick? On mine when I created another APN but it just keeps on defaulting to the "pta" APN.
Click to expand...
Click to collapse
I have no problem adding new APN and use it...
I wasn't aware there was a separate LTE plan?
That is strange. I wonder why I cannot set up an additional APN to connect to. Whenever it's selected, I can watch it get switched back after a few seconds...
Yeah, basically it's the same plan just has LTE in it's name.
If you have SQLite Edit (or something similar), you could try alter the APN manually.
HJZS2K said:
Don't have a response to your question but I'm curious how you got the new APN to stick? On mine when I created another APN but it just keeps on defaulting to the "pta" APN.
Click to expand...
Click to collapse
I had the same issue with the phone APN not sticking. I followed the instructions from a thread in the Skyrocket forum about throttling that said to use phone for the APN name, internet for the APN type and leave everything else blank or default. How I ended up solving it was using the MMSC, MMS proxy, MMS port, and APN type entries from the pta APN and using them in the phone APN and after that phone APN would stick.
Also, I too am unable to get Visual Voicemail on the phone APN.
Thanks! I can't believe I didnt think about trying that. I just created the phone APN with the same settings as PTA and it works. I'm back on regular HSPA+ speeds since I'm not in an LTE area. For what its worth, visual voicemail works just fine for me.
Evening-
I too had some issues with the VVM not working and couldn't figure out why...even tried to use YouMail with no luck and finally logged into my account and reset the password for my V-Mail. I then re-set up the stock ATT VVM, deleted the forwarding YouMail installs and everything worked like a charm again.
I too setup the alternative APN (not in the LTE Market) and it stuck just fine...maybe try resetting the password/pin and see if that works. Good luck!
Hey All,
So, for some reason, I am unable to get LTE when i am flashed on the AOKP jellybean rom for the SGH-1747M (rogers)
I did everything that was stated in Task's Gerrit (Changed the connection for WCDMA to LTE/GSM auto), all that does is work for a while on H+, then disconnects.
I've changed my apn settings to the Rogers LTE settings, which just cuts off communication all together
Ive flashed Rogers Modems, still to no avail.
The thing that bothers me is that other sgh-1747M users claim to have been getting LTE on the AOKP jellybean rom.
My question is WHY AM I HAVING TROUBLE!!!??? I know the Rom was made for an At&T sgh1747, so people may say thats why its not working, but people with Canadian SG3's have been able to get LTE on the same ROM im having trouble getting it on.
If theres anything at all im missing, can someone please clarify exactly what im missing and what I should do to get it working.
I love the AOKP jellybean ROM, i keep going back to it, but the LTE not working just hurts my feelings (since I am paying for an LTE smartphone plan). PLEASE SOMEONE HELP!!!
PS: the first time I ever changed from WCDMA to LTE/GSM autom i got a 4G symbol for about 30 secs.....never seen it again! HELP!
i dont have a gerrit. so im unsure what you are talking about.
you need to add a canadian LTE apn and then do this...
Enter *#*#4636#*#* into the dialer
phone information
set preferred network type
change to LTE/GSM auto
task650 said:
i dont have a gerrit. so im unsure what you are talking about.
you need to add a canadian LTE apn and then do this...
Enter *#*#4636#*#* into the dialer
phone information
set preferred network type
change to LTE/GSM auto
Click to expand...
Click to collapse
sorry not gerrit. you stated the info above in one of your earlier updates, which I did. Didnt seem to work for me though. Are there any suggestions as to how I can possibly fix the problem?
KCtheGREAT said:
sorry not gerrit. you stated the info above in one of your earlier updates, which I did. Didnt seem to work for me though. Are there any suggestions as to how I can possibly fix the problem?
Click to expand...
Click to collapse
I'm not really sure. Being as I don't have a Canadian model its not something I can test. But I'm sure some Canadian users will be posting here to help you out soon.
when i try to change the preferred network it will not let me change it to anything else but to lte/gsm (prl) (i have the AT&T version)
task650 said:
I'm not really sure. Being as I don't have a Canadian model its not something I can test. But I'm sure some Canadian users will be posting here to help you out soon.
Click to expand...
Click to collapse
Yea, I know, thats what Im aiming for. I wouldnt ask you directly since I know its not something you directly deal with, but thanks alot for being the first to reply!
And keep up the great work Task!
dirtbikerr450 said:
when i try to change the preferred network it will not let me change it to anything else but to lte/gsm (prl) (i have the AT&T version)
Click to expand...
Click to collapse
Thats interesting. Maybe its because you are actually using at&t network. It works when I put it on LTE/GSM, but all I get is 3G and H+
Check your IMEI in about phone/status. If its showing 0, there's a thread for that.
If you're getting 4G icon and your mobile network status says LTE and are getting LTE speeds, then its cosmetic issue. I had that problem before.
What I did was I flashed Kyan's ROM 1.3 cause its based off of Rogers firmware. Once I verified I had LTE icon on Kyan ROM, then flashed the stock/rooted ROM after.
Sent from my SGH-I747M using xda app-developers app
cue_32 said:
Check your IMEI in about phone/status. If its showing 0, there's a thread for that.
If you're getting 4G icon and your mobile network status says LTE and are getting LTE speeds, then its cosmetic issue. I had that problem before.
What I did was I flashed Kyan's ROM 1.3 cause its based off of Rogers firmware. Once I verified I had LTE icon on Kyan ROM, then flashed the stock/rooted ROM after.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Interesting. I will try that method and see what happens. Thanks for the info; will post back with results soon
Ok, so after going through the whole process stated above, i WAS able to get a 4G symbol come every now and then. But before the connection actually finalizes and goes through (before it turns blue on the aokp rom), it disconnects and goes back to WCDMA preferred. I added the rogers LTE apn, and using that apn with the LTE/GSM auto selected allowed the 4G to come, but it keeps disconnecting. It even sometimes changes back to other apns on the list by itself
Anyone know if theres a way to lock the preferred network and apn settings?
enter apn settings, then REBOOT phone. After that, enter *#*#4636#*#* into phone dialer and go change to LTE/CMDA/GSM. that worked for me, I just needed to reboot my phone for the apn settings to work
JayDieu said:
enter apn settings, then REBOOT phone. After that, enter *#*#4636#*#* into phone dialer and go change to LTE/CMDA/GSM. that worked for me, I just needed to reboot my phone for the apn settings to work
Click to expand...
Click to collapse
didnt work for me, unfortunately. im just cursed
KCtheGREAT said:
didnt work for me, unfortunately. im just cursed
Click to expand...
Click to collapse
I stumbled upon this thread and the above solution using the dialer code. Worked instantly, no reboot required. I'm running R4INS AOKP Jelly Bean port on a Rogers SGH-I727.
veebomb said:
I stumbled upon this thread and the above solution using the dialer code. Worked instantly, no reboot required. I'm running R4INS AOKP Jelly Bean port on a Rogers SGH-I727.
Click to expand...
Click to collapse
Mine works until I reboot. Then it changes back to WCDMA. I'm on Telus.
LTE on canadian i747M (Rogers)
I had similar issue with LTE after flashing to AOKP rom. The fix provided by AOKP (after every reboot, type in *#*#4636#*#* and flipping the network type from WCDMA to LTE_only, then flip to LTE/GSM auto(PRL) ) works. LTE will show up as 4G. I have the 2012-09-30 AOKP build installed.
Yesterday all of a sudden I could not get LTE anymore. Not sure what happened as the only thing I did was to activate a new account on Google. Anyway the 4G/ flipping did not work anymore. Reflashed the rom several times, still the same issue, my phone will not get LTE/4G.
This morning tried the following and voila it worked, thought I will share this:
Flip the network type to LTE Only, there is no connection, REBOOT the phone.
1. After reboot, flip the network type to LTE Only again, this time, the connection worked - what a surprise/thrill.
2. Flipped the network type to LTE/GSM auto (PRL), connection was ok and 4G came on and stayed on. Did several reboots and repeated 1 and 2 and LTE/4G was ok.
Hope this helps.
I don't recommend you to use task aokp rom! You won't get LTE real speed and Dev won't help you since you are not an at&t user! He couldn't care less about the rest so try liquid jelly bean which is a lot faster and better or milestone 4 and aristodemo! They have better support although they are tw rom but worthy anyways
Rogers I747M
Sent from my SGH-I747 using xda premium
Task compiles that ROM based on AOKP source, but AOKP officially doesn't support att. Although I didn't have problems getting lte on his ROM the fact that you have to set it every time you reboot is why I am using cm10 for now otherwise it's a good ROM!
I'm having the same issues on my rogers branded s3. No matter what I do I can get lte to even appear. My apn auto rolls back to the provided apn and if I delete that I have no data at all. Hopefully this does have an answer because the Rom is amazing
Sent from my SGH-I747M using Tapatalk 2
Alright I think I have it figured out. I added the rogers APN related all others and the only change I made was I removed the info under APN type where it said internet+MMS and left it blank. Saved the APN rebooted and I have lte now. I even rebooted my phone and each time it boots up its showing 4g without having to play with any settings
Sent from my SGH-I747 using Tapatalk 2
I got this phone for my dad, as he had this old crappy phone for years and overpaid for his cell bill every month for minute plan lol i know.
So i got him this Galaxy s4-m919 model to find out that it was upgraded as part of a plan, then the person claimed it they lost it to sell it to another person, and ofc they wouldn't refund me.
So i took another path and came on here to get help, ofc it was a T-mobile phone, so I guess i'm blacklisted on t-mobile networks, but i flashed to 4.3 modem, did sim unlock, then flashed back to 4.2.2.
Put in my new Att sim card, and service has worked ever since, the lame part is now he wants to use MMS, and it keeps on failing to send/receive, when he recieve a mms from someone, it comes up as a huge ass url(you have to click it to see the picture in the browser or w.e, but never ever loads rofl, idk y.)
He doesn't use any apps, he just uses it for calling, internet at times, navigation, wants to use MMS, takes pictures/video, etc. But MMS doesn't work, I ever called the H2O to help me, and they said that i needed to change my "Message Center #" for it to work, seriously? My other phone has "+12063130004", and my dad's is "+13123149810", i think H2O rep wanted me to change it to the # my other phone has which is the first number i listed. Is this really the care? If so, how can I change it? =/
First thing to check, in my opinion, is to see if all the APN options are set correctly. Settings \ Mobile Network \ <more> APN Settings will usually get you there. The ATT APN settings can be found here but you may need to search around if H2O requires different ones. I'm on standard ATT and the settings at that link work for me, with my M919 phone.
Good luck!
Marc
Frankenscript said:
First thing to check, in my opinion, is to see if all the APN options are set correctly. Settings \ Mobile Network \ <more> APN Settings will usually get you there. The ATT APN settings can be found here but you may need to search around if H2O requires different ones. I'm on standard ATT and the settings at that link work for me, with my M919 phone.
Good luck!
Marc
Click to expand...
Click to collapse
Just tried ATT Phone APN settings, and my internet nor MMS work; yeah H2O has a bit different settings then att.
They're:
name: h2ointernet (doesn't do anything but eh)
APN: att.mvno
proxy: not set
port: not set
server: not set
MMSC: http://mmsc.cingurlar.com
Multimedia message proxy: 66.209.11.33
Multimedia message port: 80
MCC: 310
MNC: 410
Authentication type: not set
APN type: *
APN roaming protocol: IPv4
Turn APN on/off: on
Mobile virtual network operator type: none
I also saw somewhere that you can hook up your phone to the computer and change the Message Center # using Root Explorer(just re-read the post on xda about this and u have to have it rooted =/), then 'SilverEdit' to edit the xml to enter the message center number?( also heard it wasn't permanent either, if u turned it off, or battery died or w.e. it would revert to the previous #, not sure tho) Not sure what to do here. The internet works fine, but H2O rep says i need to change my Message center number to a different one for mms to work. Also tried changing default msging app to hangouts and sending a mms, and it came up with " mobile plan blocks MMS." I also put his sim card into my working phone, and ofc the message center # was the same when i switched it over to my phone and ofc it won't send, says "mms not supported by network, service response error"
Anyone?
Can anyone help me with "Message Center"? My MMS doesn't work, can't send or receive(when i receive an mms, it comes as a big ass url something like "viewmymessage.com/webgui/bla bla/ bla bla/ and so on/", can't open the link on the phone.
If you have AT&T service on a t-mobile phone it needs to be unlocked. He is using it to call people, so I guess it is. You should try flashing an AT&T modem.
Before that, try making your APN type: IPv4 or IPv6. And MM message proxy:0
I'l try that, just put in my H2O settings: APN type: IPv4 or IPv6. And MM message proxy:0; Can't try atm, as for some reason his data went down to 0, even tho he wasn't even using internet for anything on his phone...which was weird. The way I unlocked this phone was flashing the 4.2.2. modem, then went thru "service mode" and did step by step. If the Apn settings you gave, wouldn't work, would flashing the att modem 100% work(got link for the modem, cba to find it atm, last time if flashed it, i used odin)? I'm on 4.4.2 Android version, Baseband: m919uvufnb4.
Den Den said:
I'l try that, just put in my H2O settings: APN type: IPv4 or IPv6. And MM message proxy:0; Can't try atm, as for some reason his data went down to 0, even tho he wasn't even using internet for anything on his phone...which was weird. The way I unlocked this phone was flashing the 4.2.2. modem, then went thru "service mode" and did step by step. If the Apn settings you gave, wouldn't work, would flashing the att modem 100% work(got link for the modem, cba to find it atm, last time if flashed it, i used odin)? I'm on 4.4.2 Android version, Baseband: m919uvufnb4.
Click to expand...
Click to collapse
You're with AT&T on a Tmobile phone right? You should still need to have an AT&T modem. In the slot where it says "APN type", put it as IPv4 and the slot below "APN type", put it as IPv4, also. But non of that is worth trying if you are using AT&T service. You need AT&T modem and APN settings.
Edit: I was watching a movie and read you comment wrong lol. Yes you need to flash AT&T modem and APN
Kriptik210 said:
You're with AT&T on a Tmobile phone right? You should still need to have an AT&T modem. In the slot where it says "APN type", put it as IPv4 and the slot below "APN type", put it as IPv4, also. But non of that is worth trying if you are using AT&T service. You need AT&T modem and APN settings.
Edit: I was watching a movie and read you comment wrong lol. Yes you need to flash AT&T modem and APN
Click to expand...
Click to collapse
No problem, I was just wondering, is it safe to use other carriers modem onto T-mobiles phone, yet using At&ts modem(diff carrier), some people said it could screw up your IMEI or w.e rofl. I found the modems for i335 which is Att here: http://forum.xda-developers.com/showthread.php?t=2496517
Den Den said:
No problem, I was just wondering, is it safe to use other carriers modem onto T-mobiles phone, yet using At&ts modem(diff carrier), some people said it could screw up your IMEI or w.e rofl. I found the modems for i335 which is Att here: http://forum.xda-developers.com/showthread.php?t=2496517
Click to expand...
Click to collapse
I think you are safe.
Kriptik210 said:
I think you are safe.
Click to expand...
Click to collapse
Ahh okay, so I can just flash ATT NI1 KK modem(9/18/14) modem thru odin and i'm good? ;p
Off-topic, if you flash to att modem and you already unlocked your phone or w.e., nothing gets effected, once unlocked, stays unlocked eh?
Kriptik210 said:
You're with AT&T on a Tmobile phone right? You should still need to have an AT&T modem. In the slot where it says "APN type", put it as IPv4 and the slot below "APN type", put it as IPv4, also. But non of that is worth trying if you are using AT&T service. You need AT&T modem and APN settings.
Edit: I was watching a movie and read you comment wrong lol. Yes you need to flash AT&T modem and APN
Click to expand...
Click to collapse
Actually, be careful with this. The modem (which is two parts) has to be paired with the phone model. For example, an M919 can't use the modem from an I337. The Modem runs the radio hardware, which varies by phone. ATT & T-Mo variants have different antennae bands supported, so need somewhat different radios. I'm not sure if trying a different radio will brick anything, but numerous threads have said it doesn't work. The modem consists of the modem.bin (the "GSM Modem") which can be flashed at will, and the non-hlos.bin ("LTE Modem")which needs to be paired with the phone bootloader, or else chaos ensues.
You DO need the right APN settings. Unfortunately, I have no experience with the message center thing... can't help there.
Marc
Den Den said:
Ahh okay, so I can just flash ATT NI1 KK modem(9/18/14) modem thru odin and i'm good? ;p
Off-topic, if you flash to att modem and you already unlocked your phone or w.e., nothing gets effected, once unlocked, stays unlocked eh?
Click to expand...
Click to collapse
Your phone will still be unlocked regardless. Try to change the APN setting to AT&T first. Like Frankenscript said, both phones have different radios so changing the modem might not work.
Frankenscript said:
Actually, be careful with this. The modem (which is two parts) has to be paired with the phone model. For example, an M919 can't use the modem from an I337. The Modem runs the radio hardware, which varies by phone. ATT & T-Mo variants have different antennae bands supported, so need somewhat different radios. I'm not sure if trying a different radio will brick anything, but numerous threads have said it doesn't work. The modem consists of the modem.bin (the "GSM Modem") which can be flashed at will, and the non-hlos.bin ("LTE Modem")which needs to be paired with the phone bootloader, or else chaos ensues.
You DO need the right APN settings. Unfortunately, I have no experience with the message center thing... can't help there.
Marc
Click to expand...
Click to collapse
I seen people say it works and others say it didn't. Nothing about bricking the phone tho but I do understand what you are saying.
I tried ATT settings, didnt work. I put on H20 settings that were on the site, didn't work. Tried my bros H2O settings that he got from chat rep on their site, then 4G started working, but I keep getting "Mms failed, server error" or w.e. keeps failing, put the H2O internet settings(on), and mms settings. Not sure if his phone is missing something or because his phone is blocked on tmobile's networks, his using H2O meaning his on ATT's network.(i bought him a cheap 1$ mirco-sim, off ebay) Not sure if that plays any role, the calls are good, dats works now, etc, just mms wouldn't work. Suggestions? Some1 on H2Os rep side said it could be the "message center #", that's y it can't be sent or receive or w.e.(His is atts message center #, and its greyed out"
Anyone know how to fix mms problem?(cant receive or send atm, tried a lot of things). Mms keep failing, server error, not supported by network or w.e., lost on wut else to do.
Anyone?
Den Den said:
" then the person claimed it they lost it to sell it to another person,"
Click to expand...
Click to collapse
This is the root of your problem, buying stuff from other people, it's probably stolen.
Throw it away and go buy a new phone from Att and this issue will go away.
Somethings fishy here.
Pp.
PanchoPlanet said:
This is the root of your problem, buying stuff from other people, it's probably stolen.
Throw it away and go buy a new phone from Att and this issue will go away.
Somethings fishy here.
Pp.
Click to expand...
Click to collapse
Cell 4 sale store was selling it, not just a random person. I guess they probably either do it themselves ir buy it from ppl who do it.(upgrade their phone to gs4 or w.e. then claim it lost or stolen, thus keeping their old one and selling the new one) I think they probably flashed it to work for internation, but idk, might've been rooted before 4.4.2, since ota got installed, means root is gone. Anyway to fix the problem instead of just replying with a negative reply? I want to use the phone, calling etc works fine everywhere, 4g is a bit in some places, mms doesnt work at all, one rep at h2o said it might be cuz of message center number, he wanted me to change it to a diff one and see if it solves it or not, but my message center is greyed out.
Apparently there is something wrong with it, at least you should be able to get it replaced for one that works. It could be a build.prop issue. Just guessing.
Pp. Good luck.
Still looking for a solution, anything I could try, to fix Mms to work again?(cant send or receive as it says "server error", failed mms, etc)