Related
Hey guys/gals,
I recently bought a Koodo Galaxy s2x. After a few weeks I looked online and saw that there were some JB Roms for my phone. I couldn't resist and tried to flash one after rooting. I didn't have many problems with it, but there were some glitches that started to bug me, so I decided to see about going back to stock (I should have done this first I know). So then after hours(many) of searching, the best I could find was a T-Mobile stock Rom I decided to try and flash it (both times via odin). I also read somewhere that I should use darkside superwipe to clear my cache, so I tried that, but ever since that CWM stopped working on my phone. anytime I tried to do any back up or anything it just froze, and I had to hard boot. Finally I just tried flashing T-Mobile stock ICS, and Odin said "Failed". I decided to just unplug my phone, as I thought I already screwed it up, but after rebooting, the T-mobile Rom worked. I don't understand why it works fine if the Flash Failed. Now, I can no longer connect to kies (I'm hoping official JB will be shipped soon!), and I am wondering if I can somehow return to a stock Koodo Rom, and if it will connect to Kies again, as it previously had. I have looked a lot and have not found anything that I fully understand. I'm not overly experienced, which is why I should not have flashed to begin with. This is the closest thread I have found to help me, but I don't fully understand what all I need to do:
"Haven't seen anyone shared this yet.
Here's the KOODO ICS 4.0.4 stock ROM I used CWM to flash to stock after I tried the custom ROM.
h t t p s : / / sourceforge.net/projects/koo...d.zip/download
I also flashed DARKSIDE.SUPER.WIDE before I flashed this or you can used CWM Recovery 6.0.1.2 to wipe system and cache."
Is it possible for me to get back to stock phone? and still connect to Kies? and then possibly upgrade to JB through Kies if Hercules ends up receiving it?
Thanks for any help you can give me. Here is all my current phone info incase this helps:
Model:
SGH-T989
Android Version:
4.0.3
Baseband version:
T989DTLLG2
Kernel version:
3.0.8-perf-T989UVLE1 -CL508451
[email protected] #1
SMP PREEMPT Sun May 6 15:07:07 KST 2012
Build number:
IML74K.UVLE1
Thanks.
If your ultimate goal is to get Jellybean on your phone, check the development section of this subforum. There are numerous stable and wonderful JB roms (AOKP Milestone 6, Liquid Smooth, CM10).
To get back to your stock ROM, download it from here: https://sourceforge.net/projects/koo...d.zip/download
Then, go into recovery (NOT odin), and flash the rom.
arcsine said:
If your ultimate goal is to get Jellybean on your phone, check the development section of this subforum. There are numerous stable and wonderful JB roms (AOKP Milestone 6, Liquid Smooth, CM10).
To get back to your stock ROM, download it from here: h t t p s ://sourceforge.net/projects/koo...d.zip/download
Then, go into recovery (NOT odin), and flash the rom.
Click to expand...
Click to collapse
That link doesn't work, it says cannot find page. Also, my phone is currently not rooted, does it have to be rooted to flash from recovery? if not what do I do to flash from recovery? I know how to get into recovery, but after that do I use 'apply update from external storage'? Do I have to wipe the cache first?
Thanks.
PS: I just want to be able to get back to stock for now. At least until I learn more about flashing Roms. There is still lots for me to learn, like kernels, radios, Nightly's for official Roms, or even how to properly flash a rom without feeling lost. If I know a way to get back to stock comfortably, It will give me more reason to try some other Roms (once I learn how).
Here is a working link to the stock Koodo ROM: http://sourceforge.net/projects/koodostock/files/KOODO_SGH-T989D_Stock_Signed.zip/download
Are you running a custom ROM right now or your stock ROM? If you're running a custom ROM, it should come with root privileges. If you are running the stock ROM, you can just back it up instead of needing to download the zip from sourceforge. This guide will help you get rooted: http://galaxys2root.com/t-mobile-galaxy-s2/how-to-root-icsgb-on-t-mobile-galaxy-s2-sgh-t989/. After rooting, get into recovery mode (if you can't get the button combinations to work, there is an app. called quick boot which reboots you into recovery/bootloader/etc). If you don't have a recovery or it's corrupt, download ROM manager from google play, and choose the 'install clockwork recovery'. Reboot to recovery to make sure it works, then uninstall rom manager (it's been known to cause bugs if you use it for other things - and I'd recommend other recoveries such as TWRP but it's a bit more advanced). From your recovery's screen, there should be a backup option. Make a complete backup and name it something appropriate. To flash a ROM, download it and put it on your storage drive. Reboot to recovery, and go to wipe. Wipe your data (factory reset), and system (only really need to wipe data in most cases, but be safe). To flash the custom ROM now (or flash the default ROM I just linked), there should be an option to 'install zip from sd card' or something similar. Choose that, browse to your ROM and install it. After installing, go to wipe and wipe your cache+dalvik cache, then reboot. There are several beginner guides sticked in the development forum, along with explanation of terms like radio/kernel/nightly/etc.
arcsine said:
Here is a working link to the stock Koodo ROM:
Are you running a custom ROM right now or your stock ROM? If you're running a custom ROM, it should come with root privileges. If you are running the stock ROM, you can just back it up instead of needing to download the zip from sourceforge. This guide will help you get rooted:. After rooting, get into recovery mode (if you can't get the button combinations to work, there is an app. called quick boot which reboots you into recovery/bootloader/etc). If you don't have a recovery or it's corrupt, download ROM manager from google play, and choose the 'install clockwork recovery'. Reboot to recovery to make sure it works, then uninstall rom manager (it's been known to cause bugs if you use it for other things - and I'd recommend other recoveries such as TWRP but it's a bit more advanced). From your recovery's screen, there should be a backup option. Make a complete backup and name it something appropriate. To flash a ROM, download it and put it on your storage drive. Reboot to recovery, and go to wipe. Wipe your data (factory reset), and system (only really need to wipe data in most cases, but be safe). To flash the custom ROM now (or flash the default ROM I just linked), there should be an option to 'install zip from sd card' or something similar. Choose that, browse to your ROM and install it. After installing, go to wipe and wipe your cache+dalvik cache, then reboot. There are several beginner guides sticked in the development forum, along with explanation of terms like radio/kernel/nightly/etc.
Click to expand...
Click to collapse
Thanks a ton... Worked perfectly! I'm hoping it will connect to Kies once again.. I'll let you know if it works.
Unfortunately, I still can't connect to Kies.. It just sits at the Loading status (for like 10-15 mins). But At least I don't have all of the T-mobile apps and stuff anymore!
Hello guys!
As the title says, I keep on having boot loops after flashing any custom JB Roms (Jedi, LiquidSmooth, CM Nightly, Slimbean). I'm not new to flashing roms (I got LG units though, SU660 and KU5900). When I tried flashing ICS Roms, I don't have any problem. But I want JB that bad!
I followed KonstantinKeller's thread of restoring/recovering from a bad flash (going back to GB), rooted following Melvin's thread. Then did all the prerequisites..like the common wiping of data, clear cache & davlik. But then again after flashing JB roms listed above, I keep on having boot loops!
What did I do wrong? This ain't my first time flashing (first time on this phone -T989- though)
I read some posts with almost the same problem, but I don't think I found a solution for this. Any good soul that can extend their help is highly appreciated. Thank you in advance.
I got a bootloop before when trying to flash JB roms and what I did was restore to original state (using the bad flash recovery technique), and then not rooting it but installing cwm through Odin and dirty flashing the Rom in cwm. Once it flashed I used it for a few to make sure that everything was working correctly. Then I got the goo manager app and got twrp. After that I followed all the steps in the OP (Jedi jelly) and flashed the Rom. Now I'm running Jedi jelly 3.1 perfectly. Hope this method helps.
Sent from my SAMSUNG-SGH-T989 using xda premium
djtreo said:
Hello guys!
As the title says, I keep on having boot loops after flashing any custom JB Roms (Jedi, LiquidSmooth, CM Nightly, Slimbean). I'm not new to flashing roms (I got LG units though, SU660 and KU5900). When I tried flashing ICS Roms, I don't have any problem. But I want JB that bad!
I followed KonstantinKeller's thread of restoring/recovering from a bad flash (going back to GB), rooted following Melvin's thread. Then did all the prerequisites..like the common wiping of data, clear cache & davlik. But then again after flashing JB roms listed above, I keep on having boot loops!
What did I do wrong? This ain't my first time flashing (first time on this phone -T989- though)
I read some posts with almost the same problem, but I don't think I found a solution for this. Any good soul that can extend their help is highly appreciated. Thank you in advance.
Click to expand...
Click to collapse
are you using darkside scripts to wipe? because they will cause bootloops
skinsfanbdh said:
are you using darkside scripts to wipe? because they will cause bootloops
Click to expand...
Click to collapse
is there any way to reverse the loop that the darkside wipe is causing?
it REALLY sounds like the recovery u are using is TOO OLD. Make sure u are using the latest version of twrp (2.3.3) to flash all jellybean roms.
TWRP is backwards compatible and touch capable, so if you're worried about flashing GB or ICS ROMs it'll do the trick just fine
it is however a requirement for flashing all 4.1 ROMs.
Basic install instructions:
make sure u have root
download goo manager from play
open > menu > install open script recovery
agree to everything, but make sure t989 is in the downloaded image name
reboot to recovery u should see twrp
Ok I wrote this for the OP of my ROM because the issues some people were PMing me about were just plain out dumb, This phone has been out quite a long time and still almost every thread I goto, you got people flashing in way's I didn't even know were possible and posting weird issues that were not being reproduced by the community. so I'm just gonna post this guide for all the developers sake and in hopes the people that actually need this information, receive it before posting and clogging up development threads
If you're having issues on rom's that no one else is reporting, or the DEV has not reproduced on his phone, read the following.
1) Full wipe
2) Do not restore System data or data from CWM
3) Do not dirty flash from other ROM's
4) When was the last time you did a odin to stock? this is important in my opinion and I'm not saying you need to do one but I just want to explain that custom zip's that I make and other dev's make in the shape of "roms" only affect
a few partitions on your device, other's do not get touched and can get messy/corrupt over the months (This explains why the GPS icon disappears in some peoples cases during rom switch) and this is why I get posts in this thread about people wondering why their baseband hasn't been updated after flashing my rom when my post states "MF1"
With this being said my personal rule of thumb is to odin to stock latest and then boot into stock recovery and factory reset, wipe cache/dalvik (BACKUP YOUR SD CARD TO YOUR COMPUTER), this gives your phone fresh partitions everywhere, a fresh system to root and the latest bootloader (which you need for any AOSP 4.2 rom). This is also a good time to unlock your phone if you have not already, then reroot and install custom recovery, update the recovery if need be and flash again on a brand new system. here are my steps
1) backup all user apps and data with titanium backup, DO NOT BACKUP SYSTEM APP'S
2) backup internal storage onto PC
3) Odin to stock latest
4) wait for phone to boot then reboot into stock recovery and full wipe and clear all cache
5) reboot and root the phone and custom recovery
6) flash away and put what you need on your internal storage back onto your phone via usb, see my 2nd set of instructions below
this fixes more issues then you will realize. some of the way people flash rom's on XDA and complain to me with problems is rather funny considering I have the install instructions in the OP, not to mention many of you rooted your phone when you first got it in the ICS 4.0.4 day's and haven't done an odin to stock jellybean to update all your partitions including your bootloader, now I will go over my every day flashing step's.
1)backup all USER APPS/DATA with titanium backup, DO NOT BACKUP SYSTEM APP'S (skip this if you did a odin flash to stock)
2)reboot recovery
3)nandroid (skip this if you did a odin flash to stock)
4)factory reset, wipe system, wipe both cache/dalvik
5)install rom
6)boot system
7)*(OPTIONAL) reboot to install a kernel now if needed, always wipe cache/dalvik and fix permissions after installing a kernel
8)setup phone and download titanium backup from the market
9)restore all user apps and data (you will have to put the titanium backup folder that is backed up on your computer back onto your internal storage via usb first)
Every 6 months, backup internal storage to PC and I odin to stock, much like formatting a computer
6 months is actually a long time considering how much I flash, but this device can take a beating let me tell you =P
I DO THIS WITH EVERY ROM I INSTALL, AOSP or TW
Great info, that is actually my same process when I have an issue with anything
Good read. A lot of common sense for seasoned flashers, will be great for people who are unsure.
Sent from my SGH-T999 using xda app-developers app
KorGuy123 said:
Good read. A lot of common sense for seasoned flashers, will be great for people who are unsure.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
thanks man, hoping this gets a sticky.
Danvdh said:
thanks man, hoping this gets a sticky.
Click to expand...
Click to collapse
I'll add it to my sticky
Galaxy S3 / AoCP / V4A / Turbocharged
s3 unrooting issues
I have been having some big problems with unrooting my telus SGH I747 Galaxy s3. I have flashed the stock rom using odin, did a factory reset and wiped cache and everytime i reboot it loads up the same roms i had on there at first. I have had a lot of issues with roms as well such as slow messaging times, echoing voice calls using AOKP and when i use an AOSP rom i cant connect to my phone carriers data connection at all. I read this form and decided its probably a good idea to re root as you said due to updates or whatever else but now im runing into this issue. I have ask on other forms and no one seemed to have heard of this issue. If anyone has any ideas or knows a fix i would really appreciate the help.
Custom ROM data issue
dannyteo14 said:
I have been having some big problems with unrooting my telus SGH I747 Galaxy s3. I have flashed the stock rom using odin, did a factory reset and wiped cache and everytime i reboot it loads up the same roms i had on there at first. I have had a lot of issues with roms as well such as slow messaging times, echoing voice calls using AOKP and when i use an AOSP rom i cant connect to my phone carriers data connection at all. I read this form and decided its probably a good idea to re root as you said due to updates or whatever else but now im runing into this issue. I have ask on other forms and no one seemed to have heard of this issue. If anyone has any ideas or knows a fix i would really appreciate the help.
Click to expand...
Click to collapse
So scrap the unrooting issue i have that figured out now, i just reinstalled the rom and again it doesnt have data, it is the deadly venom rom, anyone else that i know who is using this rom has absolutely no problem. I have tried a few fixes i have found via youtube, google, etc.... but none were successful. If anyone knows a fix or has any ideas please let me know.
I have an I747M S3 from a friend and trying to get it back to stable stock. It had lost it's IMEI and some NVdata corruption but I was able to resolve that searching the forums, But it has issues with apps crashing and rebooting quiet frequently. It can sometimes go feeling pretty stable ofr awhile then just kind of blows up. I have cleared away the flash counter and restored factory stock images from Odin and Keis, still having the issues. Is there a partion or something that could be getting missed? Or possible further problems related to the NVdata issues?
if you have any ideas I would appreciate it.
I used twrp to back up system, data, and boot, should I still use titanium back up to back up anything else, or is that enough to be relatively safe?
Alright so I'm new at this and haven't managed to brick my phone yet so that's a good sign.
As far as I've learned the process is Root>Recovery>Rom Flash, at least generally.
I rooted it successfully, but when I try to install recovery with ROM Manager it lists only one S3 with a bracketed cell phone provider I don't think I have. So I ditched CWM and went to Goo Manager but when I try to install that, it just hangs on some download page telling me its about to start.
So I'm going to assume the recovery thing is pretty easy to sort out and move on to my next question.
My S3 is unlocked, but I am under Koodo, which is an extension of Telus. My phone model is a I747M, not an I747. As far as I can see they are identical in hardware and software, but I'm really wondering what ROMs I can install. I've researched but didn't find much, and I don't want to blindly flash a i747 rom onto a potentially different phone, and risk anything.
Oh and PS any ROM with the vanilla android (like on the google phones) will do.
Thanks.
Czaran said:
Alright so I'm new at this and haven't managed to brick my phone yet so that's a good sign.
As far as I've learned the process is Root>Recovery>Rom Flash, at least generally.
I rooted it successfully, but when I try to install recovery with ROM Manager it lists only one S3 with a bracketed cell phone provider I don't think I have. So I ditched CWM and went to Goo Manager but when I try to install that, it just hangs on some download page telling me its about to start.
So I'm going to assume the recovery thing is pretty easy to sort out and move on to my next question.
My S3 is unlocked, but I am under Koodo, which is an extension of Telus. My phone model is a I747M, not an I747. As far as I can see they are identical in hardware and software, but I'm really wondering what ROMs I can install. I've researched but didn't find much, and I don't want to blindly flash a i747 rom onto a potentially different phone, and risk anything.
Oh and PS any ROM with the vanilla android (like on the google phones) will do.
Thanks.
Click to expand...
Click to collapse
Hello Noob (I mean that kindly, I used to be one)
I'll help you with what ever you need. I'm Canadian and on Bell i747M. Feel free to ask me any questions and I'll reply as soon as I can. Hopefully I wont be too confusing. I'll just try to break down all your questions in a point form.
First, i747 and i747M are almost identical. With the latest 4.3 ROMS there are differences in the bootloader that will make data not work on your phone. For now, stay away from any stock 4.3 ROM. AOSP ROMs (CM10, Task650) are fine.
Recovery: Through Rom Manager you will want to download the recovery titled "Samsung Galaxy S3 (ATT) " The AT&T version of the S3 is commonly shown as D2ATT(i747). This recovery will work for you. I have had a problem with TWRP myself recently being stuck on the download page. There is another way to install TWRP, but it is a bit more difficult. Try CWM first and if you like I will give you instructions for TWRP.
ROMs: If you want the most common and most stable Vanilla ROMs for your phone you are gonna want Cyanogenmod or Task's ROM. They are very similar with a few different features. Beware, if you ask questions in Task's thread you will be told it is an ATT ROM only. It does work on the i747M though.
Latest Cyanogen: http://download.cyanogenmod.org/?device=d2att
Latest Task : http://forum.xda-developers.com/showthread.php?t=1766684
You will of course lose Touchwiz on these ROMs.
Touchwiz Roms:
STAY AWAY FROM 4.3 ROMS!!!!!!
These ones will do as is. Watch that they are still 4.1.2
http://forum.xda-developers.com/showthread.php?t=1766684 This one has a white theme and is my favorite.
http://forum.xda-developers.com/showthread.php?t=2176793 This one has tons of options.
As always be sure to read the OP in every thread. You will learn lots there. If you want any more info reply and I will try and help.
BCSC said:
Hello Noob (I mean that kindly, I used to be one)
I'll help you with what ever you need. I'm Canadian and on Bell i747M. Feel free to ask me any questions and I'll reply as soon as I can. Hopefully I wont be too confusing. I'll just try to break down all your questions in a point form.
First, i747 and i747M are almost identical. With the latest 4.3 ROMS there are differences in the bootloader that will make data not work on your phone. For now, stay away from any stock 4.3 ROM. AOSP ROMs (CM10, Task650) are fine.
Recovery: Through Rom Manager you will want to download the recovery titled "Samsung Galaxy S3 (ATT) " The AT&T version of the S3 is commonly shown as D2ATT(i747). This recovery will work for you. I have had a problem with TWRP myself recently being stuck on the download page. There is another way to install TWRP, but it is a bit more difficult. Try CWM first and if you like I will give you instructions for TWRP.
ROMs: If you want the most common and most stable Vanilla ROMs for your phone you are gonna want Cyanogenmod or Task's ROM. They are very similar with a few different features. Beware, if you ask questions in Task's thread you will be told it is an ATT ROM only. It does work on the i747M though.
Latest Cyanogen: http://download.cyanogenmod.org/?device=d2att
Latest Task : http://forum.xda-developers.com/showthread.php?t=1766684
You will of course lose Touchwiz on these ROMs.
Touchwiz Roms:
STAY AWAY FROM 4.3 ROMS!!!!!!
These ones will do as is. Watch that they are still 4.1.2
http://forum.xda-developers.com/showthread.php?t=1766684 This one has a white theme and is my favorite.
http://forum.xda-developers.com/showthread.php?t=2176793 This one has tons of options.
As always be sure to read the OP in every thread. You will learn lots there. If you want any more info reply and I will try and help.
Click to expand...
Click to collapse
Awesome, I appreciate the writeup. So I flashed recovery successfully (ROM Manager doesn't seem to have d2att anymore so I used ODIN).
I'll probably go for Cyanogen mod tommorow, I'll post again if I have any questions.
Thanks.
Czaran said:
Awesome, I appreciate the writeup. So I flashed recovery successfully (ROM Manager doesn't seem to have d2att anymore so I used ODIN).
I'll probably go for Cyanogen mod tommorow, I'll post again if I have any questions.
Thanks.
Click to expand...
Click to collapse
CM is a good ROM. There should soon be Kitkat versions available. You will be seeing nightly updates when it does come around. Before you start flashing, you should learn what a 'Nandroid' is. You can take a Nandroid backup in CWM or TWRP. Always save these to an External SD card. If anything ever goes wrong with your ROM, you can just re flash the Nandroid backup and be back to where you were the day you did the backup. The farther you get into flashing the more likely you will need these. Before doing your first Flash, do an Nandroid and copy your photops and stuff off of the phone. When jumping between Stock and AOSP roms, you will need to do a full wipe and will lose what you have not backed up. Be sure to sync contacts to Google....this is the one that has screwed me the most.
BCSC said:
CM is a good ROM. There should soon be Kitkat versions available. You will be seeing nightly updates when it does come around. Before you start flashing, you should learn what a 'Nandroid' is. You can take a Nandroid backup in CWM or TWRP. Always save these to an External SD card. If anything ever goes wrong with your ROM, you can just re flash the Nandroid backup and be back to where you were the day you did the backup. The farther you get into flashing the more likely you will need these. Before doing your first Flash, do an Nandroid and copy your photops and stuff off of the phone. When jumping between Stock and AOSP roms, you will need to do a full wipe and will lose what you have not backed up. Be sure to sync contacts to Google....this is the one that has screwed me the most.
Click to expand...
Click to collapse
Alright, so I have CWM v5.5.0.4, which from what I understand is pretty outdated. It was probably just me following an outdated guide and forgot to look up an updated version. Will I need to update of will it cause any problems? I already backed up my phone on 5.5.0.4 with Nandroid.
Also I feel like I'm misunderstanding the procedure of flashing a new rom. So I downloaded a cm-10.1.3 zip which is is the latest stable build on android 4.2.2. This has an .img inside so this is the rom. I use CWM to flash this onto my phone correct? (Once I figure out if I need to update CWM)
Lastly whats the deal with Gapps? I downloaded the CM Gapps for 10.1 from their wiki. Is this the only way to get Gmail, Maps, and the Google Play Store onto the phone?
From what I understand I think I can just use odin to flash, correct? If so I'd probably prefer that because its the most familiar and noob friendly.
Czaran said:
Alright, so I have CWM v5.5.0.4, which from what I understand is pretty outdated. It was probably just me following an outdated guide and forgot to look up an updated version. Will I need to update of will it cause any problems? I already backed up my phone on 5.5.0.4 with Nandroid.
Also I feel like I'm misunderstanding the procedure of flashing a new rom. So I downloaded a cm-10.1.3 zip which is is the latest stable build on android 4.2.2. This has an .img inside so this is the rom. I use CWM to flash this onto my phone correct? (Once I figure out if I need to update CWM)
Lastly whats the deal with Gapps? I downloaded the CM Gapps for 10.1 from their wiki. Is this the only way to get Gmail, Maps, and the Google Play Store onto the phone?
From what I understand I think I can just use odin to flash, correct? If so I'd probably prefer that because its the most familiar and noob friendly.
Click to expand...
Click to collapse
I wouldn't use Odin. It really will only become necessary if you want to flash back to complete stock.
You do want the latest version of CWM installed or you will run into problems flashing. You can get this 2 ways.
1: through Rom Manager. You will find your specific CWM with these steps. a-Recovery Setup b-ClockworkMod Recovery c-Hit menu button to left of home and pick 'Show All Devices' d- Here scroll until you get 'Samsung Galaxy S3 (AT&T)' D2ATT. e- Click Flash ClockworkMod Recovery. Allow permissions for root. Ignore the touch option unless you want to pay for it. I can teach you the free way.
You will now have the latest CWM
You can download the latest CM-10.2, it is in release candidate stage and is extremely stable. They have been working on it for months. It will give you 4.3 (The good kind, not the one I warned against). After downloading a ROM, you leave it zipped exactly like it is. Do not extract it, just move it to your SD card. You will also want Gapps. Gapps is necessary because it is Google's own software that is legally not allowed to be built into ROMs. It must be installed separately. You can find those here. They help you know which to use with chart depending on which Cyanogen you use http://wiki.cyanogenmod.org/w/Gapps. Again just move the zip over to your internal.
With these 2 zips transferred to your phone you are ready to start. Before you do, make sure you have transferred all your pics and stuff off of the phone. Also be sure to save your contacts. You can now boot into recovery. You should notice recovery version 6.0.4.3. Volume button scrolls menu, Power button selects. You will want to do a Nandroid backup in case anything goes wrong. I know you did one with CWM 5.5 but should do another just to be sure it is with current CWM. You can delete the other one later.
Goto - backup and restore
Goto - backup to external or /storage/sdcard1 (i put both because im already on 4.4 and may have different menu than you.
Let this work and when done continue to flashing ROM
Go to 'choose zip from /sdcard'
Select CM-10-xxxxxxx.zip
After this completes you will do the same with Gapps.zip
After completion of both files you will need to factory reset your phone. Flashing AOSP over Stock will cause boot loops if you do not.
Go back to CWM main menu and select wipe data/factore reset
After completing this go to wipe cache partition and select this.
Finally you want to wipe Dalvik cache. you will find this in CWM under main menu /advanced/wipe dalvik cache.
Upon completion of this you should have CM10 4.3 running. Just exit CWM reboot phone and when booted follow setup instructions.
Let me know if you get stuck somewhere.
BCSC said:
Upon completion of this you should have CM10 4.3 running. Just exit CWM reboot phone and when booted follow setup instructions.
Let me know if you get stuck somewhere.
Click to expand...
Click to collapse
Alright cool. So through Mod Manager, there was not d2att, there was only S3(Metro PCS) which I thought was a bit odd. I found a way to flash an updated recovery via terminal emulator so that went well.
And your steps were very well written and concise. I'm now running CM without a problem.
Thanks for your help!
Czaran said:
Alright cool. So through Mod Manager, there was not d2att, there was only S3(Metro PCS) which I thought was a bit odd. I found a way to flash an updated recovery via terminal emulator so that went well.
And your steps were very well written and concise. I'm now running CM without a problem.
Thanks for your help!
Click to expand...
Click to collapse
Cool terminal emulator was that other way to do it. Hope all is well for you with this. Welcome to flashing. As another tip, if you are going to flash a lot, there is an app called Titanium backup that is well worth the $5 it costs. It saves all your apps and data and after a clean wipe you can just reinstall all your apps in one step. For example after a wipe you will not lose your Angry Birds levels if you restore your titanium data. It's worth a look.
Hey guys, I really need your help! I'm trying to install Cyanogenmod 11 on my S2X. Problem is, my S2X runs Android 4.0.3 and does not have the radio needed to install Cyanogenmod 11. I am not able to update my device to Android 4.1.3, so I was able to find a zip file of the Jelly Bean radio that is able to meet Cyanogenmod's standards. Can I put a 4.1.3 radio on my phone running 4.0.3? Would it work? If not, can you explain any other methods to get around this?
What recovery are you using?? Chances are its outdated. Unless you just updated it?
Once you update that....take a nandroid backup, so you can restore it if things don't work out.....then wipe cache, dalvik cache, system and data....NOT internal SD....then flash the radio, then the ROM. Then gapps.
My advice tho....make sure you have everything downloaded to your phone, of course....and download a couple ROMs. If cm doesn't install, or won't boot....try another one....doing the same procedure.
If none of that works.... Restore your nandroid you just did.
Worst case tho....be prepared to Odin stock back on your device.
Have to be prepared for anything with this stuff.
KJ said:
What recovery are you using?? Chances are its outdated. Unless you just updated it?
Once you update that....take a nandroid backup, so you can restore it if things don't work out.....then wipe cache, dalvik cache, system and data....NOT internal SD....then flash the radio, then the ROM. Then gapps.
My advice tho....make sure you have everything downloaded to your phone, of course....and download a couple ROMs. If cm doesn't install, or won't boot....try another one....doing the same procedure.
If none of that works.... Restore your nandroid you just did.
Worst case tho....be prepared to Odin stock back on your device.
Have to be prepared for anything with this stuff.
Click to expand...
Click to collapse
Thank you for your advice! I'm using CWM recovery 6.0.4.3. If this version is outdated do you think this is the main source of my problem? When I tried to install CM it told me it couldn't because my radio wasn't new enough, so I thought that was the main source of my problem. I realized that it needs the Jelly Bean radio (TLMC4) whereas I have the Ice Cream Sandwich radio (TLLE4). If I installed the Jelly Bean radio on my Ice Cream Sandwich device, do you think that would work also?
I would just flash radio, then ROM. After backing up in recovery.
No need to ever boot into ICS with the new radio.
Personally....its more work, but I'd Odin 4.1.2 on your phone first. Then you will be up to date. Then flash recovery again....whatever is recommended in cm thread, and root. Then flash cm. Again...after a backup. Always nandroid backup first.
KJ said:
I would just flash radio, then ROM. After backing up in recovery.
No need to ever boot into ICS with the new radio.
Personally....its more work, but I'd Odin 4.1.2 on your phone first. Then you will be up to date. Then flash recovery again....whatever is recommended in cm thread, and root. Then flash cm. Again...after a backup. Always nandroid backup first.
Click to expand...
Click to collapse
Alright, I'll Odin 4.1.2 but I cant find a download for my phone (SGH-T989D). Can you help?
Post number one has a working link, under the crossed out hot file link.
http://forum.xda-developers.com/showthread.php?t=2245593
KJ said:
Post number one has a working link, under the crossed out hot file link.
http://forum.xda-developers.com/showthread.php?t=2245593
Click to expand...
Click to collapse
Thank you so much for your help!