Hi people,
So here's my maximus kernel for the Xperia T2 Ultra Dual (D5322). Please bear in mind that it works only on the dual sim variant. Your device won't boot if you flash it on the single sim variant!
Kernel features :-
Code:
-->Compiled with Christopher83's Linaro 4.9.1 for Cortex-A15 CPUs
-->Compiled with -O3 and many other optimizations
-->XZ compression enabled
-->Update all governors from CAF sources (no more restarts when changing to interactive governor)
-->Disable CRC in mmc driver (might give a 30% performance boost)
-->Overclocking upto 1.6 GHz
-->3x faster integer square root algorithm
-->Many oom and memory related patches and fixes
-->Enabled garbage collection for user space wakeup sources
-->Intelliplug - An intelligent hotplugging driver!
-->Cpufreq smooth scrolling patch
-->Enabled last_kmsg
-->Added intelliactive governor
-->Many more patches and fixes
Ramdisk features :-
Code:
-->Dual recovery (TWRP 2.7.1.0 and CWM 6.0.4.9) [Special thanks to DoomLoRd for his kernel - [url]http://forum.xda-developers.com/showthread.php?t=2735137[/url]]
* Press the volume down button to access TWRP
* Press the camera button to access CWM
* The default recovery is TWRP (suppose you select to reboot into recovery from the rom, TWRP will get loaded)
-->Init.d support
-->ro.debuggable and ro.secure set to 0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions :-
1. Download the kernel and make sure that your bootloader is unlocked. If not, then check this - http://unlockbootloader.sonymobile.com
2. Power off your phone and connect the usb cable while holding down the volume up key. You'll get a blue led on the phone.
3. Open a terminal window and use fastboot to flash the kernel. Command -
Code:
fastboot flash boot <file name>.img
4. Disconnect your phone once it is done and start it normally.
Downloads :-
Maximus Downloads JELLYBEAN .253 ONLY (D5322 - DUAL SIM only)
Changelog & sources in the second post.
Credits:-
-->DoomLoRD
-->Faux123
-->Dhacker29 and all other Moto G devs
-->deedwar
-->Androlover98
-->Abhinav1997
XDA:DevDB Information
Maximus Kernel, ROM for the Sony Xperia Z2
Contributors
abcdjdj
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: Maximus V1
Stable Release Date: 2014-06-30
Created 2014-06-30
Last Updated 2014-07-10
Changelog :-
Code:
V2.1
-->Re-introduced overclocking
V2
-->Enabled last_kmsg
-->Added init.d support in the ramdisk
-->Added intelliplug - An intelligent hot plugging driver! (thanks to faux123)
-->Add intelliactive governor
-->Merged .269 kernel sources
-->Bulk update all cpu governors from caf/kk_3.5_rb4.1
-->Disabled overclocking (doesn't seem to be working)
-->Smooth scrolling cpufreq patch (thanks to DoomLoRD)
-->Many other patches and fixes
-->Entire list of commits over here - [url]https://github.com/abcdjdj/maximus/compare/0ae0c76828...be14ec6658[/url]
V1
-->Initial release
Sources :-
Kernel - https://github.com/abcdjdj/maximus
Ramdisk - https://github.com/abcdjdj/ramdisk_tianchi
Wooooow greeeeat!
Glad to see first custom kernel for our phones
Thanx mate, going to try this
ps: I have a problem with TWRP that touch screen wont work in TWRP, it works good in CWM
Sent from my D5322 using Tapatalk
Great job! :highfive:
hes_luckey said:
Wooooow greeeeat!
Glad to see first custom kernel for our phones
Thanx mate, going to try this
ps: I have a problem with TWRP that touch screen wont work in TWRP, it works good in CWM
Sent from my D5322 using Tapatalk
Click to expand...
Click to collapse
Please do read the instructions in my twrp thread (http://forum.xda-developers.com/showthread.php?t=2764408) especially step 7. Moto E also had the same problem with touch in TWRP so I have asked the Moto E dev for the solution. Mostly it will get fixed in the next version, very soon.
abcdjdj said:
Please do read the instructions in my twrp thread (http://forum.xda-developers.com/showthread.php?t=2764408) especially step 7. Moto E also had the same problem with touch in TWRP so I have asked the Moto E dev for the solution. Mostly it will get fixed in the next version, very soon.
Click to expand...
Click to collapse
which is the best governor and io according to you that we should use ?
Ashwin Prabhunerurkar said:
which is the best governor and io according to you that we should use ?
Click to expand...
Click to collapse
I have been using the default settings (ondemand with cfq) and it is pretty good. I have not added any governors or I/O schedulers in V1 as I was focusing on improving the ram problem.
Thnx for your instruction
Sent from my D5322 using Tapatalk
excellent kernel
no problem as yet
now please post the cm build can wait to try it
---------- Post added at 10:30 AM ---------- Previous post was at 10:21 AM ----------
hey man take a look at this
forum.xda-developers.com/showthread.php?t=2799730
any chance of porting this to our device
abcdjdj said:
I have been using the default settings (ondemand with cfq) and it is pretty good. I have not added any governors or I/O schedulers in V1 as I was focusing on improving the ram problem.
Click to expand...
Click to collapse
Thank you So Much abcdjdjd finally fixed RAM Leakage problem on t2 Ultra Dual I m using this kernel from 30th june 2014 8pm onwards still now no problem great kernel
already hit Thanks button
anavghare said:
Thank you So Much abcdjdjd finally fixed RAM Leakage problem on t2 Ultra Dual I m using this kernel from 30th june 2014 8pm onwards still now no problem great kernel
already hit Thanks button
Click to expand...
Click to collapse
Can you post some Antutu and Quadrant benchmark results on this kernel?
---------- Post added at 02:12 PM ---------- Previous post was at 02:11 PM ----------
abcdjdj said:
Hi people,
So here's my maximus kernel for the Xperia T2 Ultra Dual (D5322). Please bear in mind that it works only on the dual sim variant. Your device won't boot if you flash it on the single sim variant!
Kernel features :-
-->Compiled with Christopher83's Linaro 4.9.1 for Cortex-A15 CPUs
-->Compiled with -O3 and many other optimizations
-->XZ compression enabled
-->Update on-demand and interactive governors from Moto G CAF kernel (no more restarts when changing to interactive governor)
-->Disable CRC in mmc driver (might give a 30% performance boost)
-->Overclocking upto 1.6 GHz
-->3x faster integer square root algorithm
-->Many oom and memory related patches and fixes
-->Enabled garbage collection for user space wakeup sources
Ramdisk features :-
-->Dual recovery (TWRP 2.7.1.0 and CWM 6.0.4.9) [Special thanks to DoomLoRd for his kernel - http://forum.xda-developers.com/showthread.php?t=2735137]
* Press the volume down button to access TWRP
* Press the camera button to access CWM
* The default recovery is TWRP (suppose you select to reboot into recovery from the rom, TWRP will get loaded)
-->ro.debuggable and ro.secure set to 0
Downloads :-
Maximus V1 (D5322 - DUAL SIM only)
Sources :-
Kernel - https://github.com/abcdjdj/maximus
Ramdisk - https://github.com/abcdjdj/ramdisk_tianchi
Credits:-
-->DoomLoRD
-->Faux123
-->Dhacker29 and all other Moto G devs
-->deedwar
-->Androlover98
-->Abhinav1997
XDA:DevDB Information
Maximus Kernel, ROM for the Sony Xperia Z2
Contributors
abcdjdj
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: Maximus V1
Stable Release Date: 2014-06-30
Created 2014-06-30
Last Updated 2014-06-30
Click to expand...
Click to collapse
Thanks for this kernel. But can you please write all the steps that we need to follow to flash this kernel?
Ashwin Prabhunerurkar said:
excellent kernel
no problem as yet
now please post the cm build can wait to try it
---------- Post added at 10:30 AM ---------- Previous post was at 10:21 AM ----------
hey man take a look at this
forum.xda-developers.com/showthread.php?t=2799730
any chance of porting this to our device
Click to expand...
Click to collapse
That's not a stock based rom. It is compiled from source. Even if we had cm11, we wouldn't be able to compile that rom as Achotjan hasn't made the source code open source (might cause legal problems with Sony). And it is a kk rom so no point in trying to port it using winrar.
charming.arpit said:
Can you post some Antutu and Quadrant benchmark results on this kernel?
---------- Post added at 02:12 PM ---------- Previous post was at 02:11 PM ----------
Thanks for this kernel. But can you please write all the steps that we need to follow to flash this kernel?
Click to expand...
Click to collapse
Op updated.
abcdjdj said:
That's not a stock based rom. It is compiled from source. Even if we had cm11, we wouldn't be able to compile that rom as Achotjan hasn't made the source code open source (might cause legal problems with Sony). And it is a kk rom so no point in trying to port it using winrar.
Op updated.
Click to expand...
Click to collapse
Do you mean to suggest that there is no need for unlocking the bootloader and install cwm for our phones to flash this kernel. I mean there is no instructions for the same in the update.
charming.arpit said:
Do you mean to suggest that there is no need for unlocking the bootloader and install cwm for our phones to flash this kernel. I mean there is no instructions for the same in the update.
Click to expand...
Click to collapse
wow man u assume too much
1)You have to unlock bootloader if you want to use this kernel or any other custom rom
2)Dont install cwm
3)extract boot img from the zip of this kernel and flash it via flashtool
Ashwin Prabhunerurkar said:
wow man u assume too much
1)You have to unlock bootloader if you want to use this kernel or any other custom rom
2)Dont install cwm
3)extract boot img from the zip of this kernel and flash it via flashtool
Click to expand...
Click to collapse
I posted that question because in this thread the steps should be clear to the user of this kernel on how to flash this kernel.
The instructions should start right with unlocking the bootloader to finally getting this kernel onto our devices.
I hope, you do not take my comment otherwise but until we know all the steps in one place, it is hard for users like me to run this kernel on my phone.
abcdjdj said:
That's not a stock based rom. It is compiled from source. Even if we had cm11, we wouldn't be able to compile that rom as Achotjan hasn't made the source code open source (might cause legal problems with Sony). And it is a kk rom so no point in trying to port it using winrar.
Op updated.
Click to expand...
Click to collapse
hey man any update on he kernel
and btw a dev is working on your sources to kill some cm bugs
i hope u dont mind
Ashwin Prabhunerurkar said:
hey man any update on he kernel
and btw a dev is working on your sources to kill some cm bugs
i hope u dont mind
Click to expand...
Click to collapse
Yes, I have added Intelliplug and a new governor, enabled last_kmsg. Still need to work more on it. Got a lot of study load at the moment so it might get a bit delayed.
Of course I don't mind if another dev works on my sources.
Ashwin Prabhunerurkar said:
wow man u assume too much
1)You have to unlock bootloader if you want to use this kernel or any other custom rom
2)Dont install cwm
3)extract boot img from the zip of this kernel and flash it via flashtool
Click to expand...
Click to collapse
I have completed this, now please tell me how to install ultimate rom v2. BTW, ignore the mail i sent you. I was able to fix up my phone!
Thanks
Arpit
charming.arpit said:
I have completed this, now please tell me how to install ultimate rom v2. BTW, ignore the mail i sent you. I was able to fix up my phone!
Thanks
Arpit
Click to expand...
Click to collapse
flash maximus kernel
then download ultimate rom v2 and flash it
wipe dalvic cache
and reboot
and fix root if asked
Ashwin Prabhunerurkar said:
flash maximus kernel
then download ultimate rom v2 and flash it
wipe dalvic cache
and reboot
and fix root if asked
Click to expand...
Click to collapse
Can you exactly tell me on how to flash v2 rom?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Users mostly search for Download Link so made a simple one
Key Features
-O3 , Cortex A7 , Graphite , neon , vfpv4 Optimizations
Compiled from SaberMOD GCC 4.10 Toolchain which is almost latest Toolchain with best optimizations
All New MSM_HOTPLUG driver from @myfluxi kernel
LCD KCAL Color Control ported from LG G2 code
Adaptive Voltage Scaling Support
Vibration Strength Control
Completely New msm_thermal code ported from franco kernel by @franciscofranco (Now you can Chill )
More CPU Governors ( ondemand , performance , conservative(updated) , powersave , ondemandplus , abyssplug , smartassH3 )
More I/O Schdedulers ( BFQ(v6) , Deadline , CFQ , ROW , SIO , FIOPS , No-op , V(R) , ZEN )
added new power management mode "PowerSuspend" (Hello Battery)
add official f2fs kernel support + f2s optimization
Improved vibration scheduling
added LZ4 compression (faster than LZO)
Frandom -Fast Kernel Number Generator driver added
[*]File systems support: Ext2/3/4, FAT32, NTFS, CIFS, USB OTG ,UDF
Debugging is OFF by Default to save CPU cycles, and extend battery life.
UKSM for Page Merging
SELinux optimization (faster SELinux!)
Mutex optimization (better multi-tasking)
Scheduler optimization (smoother multi-tasking)
Added cdrom option to UMS-lun-devices (Now you can mount internal memory as CD-ROM)
Enabled 8 new TCP Congestion controls viz. ( Westwood, Yeah, Cubic Veno,Vegas , BIC, Reno, HTCP )
Click to expand...
Click to collapse
Changelog:https://dl.dropboxusercontent.com/u/117413382/armani/changelog.txt
Click to expand...
Click to collapse
Downloads:
(XDA-Devdb):Mod Edit: Links removed
(Mirror to Dev-Host:Mod Edit: Links removed/QUOTE]
Installation:
Flash the compatibility patch from here
Then, Place the Kernel zip in the SDCard
and Flash it in recovery
Click to expand...
Click to collapse
Sources:
https://github.com/GuneetAtwal/kernel_h1s
Click to expand...
Click to collapse
F.A.Q. - Read this before complaining!
1. This kernel works on Y or X rom?
A: It is compatible with almost all Kitkat ROMs and i have persnally tested it on CM11 & Carbon ROM only and users on other ROM are on their own risk and complaining about the Kernel will not be tolerated..!
2. OMG Battery Sucks...!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
3. How do I flash this?
A: Reading the OP, theres a reason why I added instructions on it.
4. Which App is the best for Controlling the Kernel?
A: Their are many apps in the Play Store but i personally recommend TricksterMOD or FauxClock rest its on you whether which you find most comfortable.
5. Getting Random reboots..! Any Help
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
7. Which Settings are best for XYZ ROM and XYZ thing..!
A: THe Default settings of the Kernel are the best and Balanced one but you can ask other users on the thread or can discuss which settings are the best..!
8. XYZ Feature doen't work in this Kernel on XYZ ROM..! You suckass, fix it..!
A: I don't know who you are. I don't know what you want. If you are looking for a fix, I can tell you I don't have the solution. If you leave now, that'll be the end of it. I will not look for you, I will not pursue you. But if you don't, I will look for you, I will find you, and I ignore you.
9. My Kernel settings are not sticking and i have tried almost all the fu**in apps and none works..!
A: Have you installed busybox ? No? Then kindly install it and not every busybox installation is 100% complete so kindly keep that in mind before posting and beating a dead horse in the thread...!
Click to expand...
Click to collapse
Credits:
-faux123
-armani-devs
-every other dev whose code i incorporated in my kernel
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Note: Feel free to post anything even if it is OT i love to see Geekt Talks , Benchmarks , Discussion going over my Thread
I currently don't own this device so i can't answer all the device Specific Questions so you users help each other and make things easy for all of us.
Lets make a better community here on this Thread
Cheers..!
XDA:DevDB Information
Blaze™ Kernel for Armani, Kernel for the Xiaomi Redmi 1S
Contributors
GuneetAtwal
Source Code: https://github.com/GuneetAtwal/kernel_h1s
Kernel Special Features: Custom Hotplug and Thermal Driver , Better Battery Life
Version Information
Status: Nightly
Created 2015-01-22
Last Updated 2015-01-22
Click to expand...
Click to collapse
Reserved
..
Controllers
You can use Trickster MOD app to control all the functions of the kernel
you can download it here http://bit.ly/1lcuFGO
Click to expand...
Click to collapse
Some info on Governors and I/O Schedulers
http://forum.xda-developers.com/galaxy-s2/general/ref-kernel-governors-modules-o-t1369817
Reserved
Wii try it as I am on carbon ROM & according to op this kernel is compatible with it.
Thanks for awesome work
Update- working flawlessly in carbon rc5.now checking for features.
Sent from my Redmi 1S using Tapatalk
Working on PAC ROM
Working on PAC MAN ROM
Installed Kernel Compatibility Patch too
The features look awesome and promising
Thanks for this man!
Will report back after using it properly for a day or so
So far no reboots and all settings work properly
Sent from my Machine
kuldeepraj said:
Wii try it as I am on carbon ROM & according to op this kernel is compatible with it.
Thanks for awesome work
Sent from my Redmi 1S using Tapatalk
Click to expand...
Click to collapse
Don't forget to flash the compatibility patch before flashing this Kernel
P.S. Updated the Instructions too
Thank you...Hats Off!!!
Hi @GuneetAtwal,
Great Work Brother!!
I'm Trying It on My Own CrysTal ROM!!
Thanks A ToN!!
Sent Via Crystal ROM For Redmi 1S Using Tapatalk App
saksham.singh48 said:
Hi @GuneetAtwal,
Great Work Brother!!
I'm Trying It on My Own CrysTal ROM!!
Thanks A ToN!!
Sent Via Crystal ROM For Redmi 1S Using Tapatalk App
Click to expand...
Click to collapse
Always great to see old friends in my threads
Did not work with Mokee rom ver UNOFFICIAL by Sychost ( MK44.4-armani-201411280023-UNOFFICIAL) . It stuck at Mi logo.
LE . I didn't flash compatibility mod. I try that now,, -->> Not work even with compatibility patch.
Finally
Finally the wait is over Blaze is here
Proof of working on PAC ROM
Sent from my Transformer TF101
Great work,bro....................
nice to see you in redmi 1s original development and thanx for the awaiting kernel
pgreed said:
Did not work with Mokee rom ver UNOFFICIAL by Sychost ( MK44.4-armani-201411280023-UNOFFICIAL) . It stuck at Mi logo.
LE . I didn't flash compatibility mod. I try that now,, -->> Not work even with compatibility patch.
Click to expand...
Click to collapse
flash according to the instructions first flash compatibility mod then flash the kernel zip
Now do a clean flash and go acc. to the instructions i am sure it will work perfectly
sharan.nyn said:
Proof of working on PAC ROM
Sent from my Transformer TF101
Click to expand...
Click to collapse
Great Now do test everything and report back here then i will add the ROM name in F.A.Q.
4.10 toolchain is not the latest..GCC 4.10 was discontinued..and was re-initialized as GCC 5.0..
you're misleading..lol
proof: you can scan all branches if there was a 4.10 that went to production/development..
I am building my own toolchains for my projects and thats where my GCC builds come from with patches from Google's repo..
that's a bad habit of "copy pasting" ..moreover looking at your git..you copied my changes on thermal without even crediting me for adapting it to Armani..its not the original Thermal from Franco anymore as i made the adaptation..anyways..congrats..
kairi_zeroblade said:
4.10 toolchain is not the latest..GCC 4.10 was discontinued..and was re-initialized as GCC 5.0..
you're misleading..lol
Click to expand...
Click to collapse
I just copy pasted my previous thread LOL will edit it mate although not a big issue
Mirror please? XDA link seems to be slow; downloading at 31KB/s; Dev Host reloading the same page!!! Sorry to trouble you
add official f2fs kernel support + f2s optimization
Click to expand...
Click to collapse
So, this means I can now format my /data,/cache and /system to f2fs? (after converting the CM11 rom to f2fs obviously)
Although, this is a bit confusing:
File systems support: Ext2/3/4, FAT32, NTFS, CIFS, USB OTG ,UDF
Click to expand...
Click to collapse
Faced 2 reeboots in carbon ROM after flashing blaze kernel. One when installing busybox and another when opening trickster mod app also kernel settings changes to default after rebooting .
Sent from my Redmi 1S using Tapatalk
amangupta53 said:
So, this means I can now format my /data,/cache and /system to f2fs? (after converting the CM11 rom to f2fs obviously)
Although, this is a bit confusing:
Click to expand...
Click to collapse
yup although i haven't tested yet so don't try it now i will be trying it tomorrow and if it works will report in the thread or else will update the kernel
kuldeepraj said:
Faced 2 reeboots in carbon ROM after flashing blaze kernel. One when installing busybox and another when opening trickster mod app BTW kernel setting changes to default after rebooting .
Sent from my Redmi 1S using Tapatalk
Click to expand...
Click to collapse
just install the latest Trickster MOD app , for me the settings do stick i have just installed the latest version of the app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING
Your warranty is now void. I am not responsible for anything that happens to your device, whether you miss your work alarm, or your phone catches fire! Permanent screen damage may always occur!
ROM Features:
-ROM uses CAF sources, which are much less hacky than our old JB sources and kernel is LP based
-ROM compiled with -O3 and UBERTC 4.8
-JustArchi's ArchiDroid Optimizations V4
-Built-in SuperSU v2.46
-Prebuilt Google WebView
-SQLite 3.8.10.2
-F2FS support
-Everything Euphoria-OS already supports!
Kernel Features:
-Based on CAF Kernel
-Patched up to 3.4.108
-CPU Governors: Alucard, Bacon, Impulse, Interactive, Nightmare, Ondemand, Pegasusq, Performance and Smartmax
-I/O Schedulers: BFQ, CFQ, Deadline, Fiops, Noop, Row, Sio and Zen
-Kernel compiled with UBERTC 5.1 and graphite flags
-Kernel compressed with lz4 for insanely fast boot times
-Kernel support for F2FS, Fast Charge, Sound Control, Simple GPU Algorithm and more!
-CPU overclocking to 2.6 GHz
-GPU overclocking to 650 Mhz and underclocking to 100 Mhz
-Voltage support
-Bricked thermal driver
-msm_hotplug
-Latest KCAL support
How to Install:
1. Download blastagator's latest TWRP
2. Do a complete wipe (/system, /cache, etc).
3. Flash LP Bootstack, then ROM, then GApps!
4. Reboot and enjoy!
Downloads:
LP Bootstack (Go into the lp folder of your variant and click "view raw" for the zip): https://github.com/lg-devs/bootstacks
ROM: https://www.androidfilehost.com/?a=show&w=files&flid=25170
GApps choice is up to you!
Special Thanks to:
-Euphoria-OS team
-lg-devs team for bases for the device trees
-Rashed97 for his work on the G2 trees
-DJLaMontagneIII, RenderBroken, REV3NT3CH, dorimanx, and savoca for their work on the G2 kernel
Thanks to all the other ROMs/teams out there!
XDA:DevDB Information
Euphoria-OS, ROM for the LG G2
Contributors
tsunamical, Rashed97
Source Code: http://www.github.com/Euphoria-OS-Legacy
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: LP Bootstack
Based On: CM 12.1 + CAF G2 Sources
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-06-22
Created 2015-05-22
Last Updated 2015-06-22
Frequently Asked Questions
What's the difference in your builds and dr87's builds?
dr87 builds with everything as close to stock Euphoria as he can. If you are a fan of his old Mahdi ROM builds, then you would really enjoy his builds. My builds use different toolchains, optimizations, and my kernel. Neither version is better than the other. I reccomend you give them both a whirl before settling down for one.
What kernels can I flash on this?
The ROM is using CAF sources, which means you cannot flash the CM12 versions of B14CKB1RD or Render's CM12 kernel. Current options are Llama kernel or stick with stock.
How do I flash this?
If you are coming from an older build:
Clean flash (/data, /system, /cache and dalvik, but NOT internal storage) -> Flash ROM -> Flash GApps -> Reboot
If this is the first time using any CAF based ROM (First time using Euphoria):
Clean flash (/data, /system, /cache and dalvik, but NOT internal storage) -> Flash LP bootstack -> Flash ROM -> Flash GApps -> Reboot!
Great job! I've been stalking you and a few others for a while now on github.
Is the GPS working without a stock LP base now? Do you have hangouts?
Choristav said:
Great job! I've been stalking you and a few others for a while now on github.
Is the GPS working without a stock LP base now? Do you have hangouts?
Click to expand...
Click to collapse
GPS is working. Only thing that shouldn't be working is USB-OTG. And you can find my Google+ profile through my XDA profile, or just look at the G2 section of the Euphoria-OS G+ page.
Also to others, VS980 build coming up tomorrow. Still waiting on bootstack for F320 before I put a build out for it, and waiting on actual Lollipop for D803 and LS980.
What does mean CAF based kernel? No need for JB bootloader a better battery/performance?? based on official LP kernel?
Flashing, will report.
Check dem Hangouts!
Gonna hose the vs980 eh Tyler!?
Just breaking your stones lol. Glad to see you getting back into the seat.
If you or zac need a vs980 tester let me know
Um.. Sprint lollipop has been released along with kernel code....
Sent from my LG-LS980 using XDA Free mobile app
Abrilabr said:
What does mean CAF based kernel? No need for JB bootloader a better battery/performance?? based on official LP kernel?
Click to expand...
Click to collapse
Will be adding to FAQ soon, but it stands for Code Aurora Forums, and CAF usually tends to use the latest things. The kernel is LP-based so you will NOT be able to flash the CM12 Render or B14CKB1RD. You should still be on the JB bootloader however.
Lawlrus said:
Gonna hose the vs980 eh Tyler!?
Just breaking your stones lol. Glad to see you getting back into the seat.
If you or zac need a vs980 tester let me know
Click to expand...
Click to collapse
Yep! And glad to see you back as well. Won't be needing any other testers unless I'm playing with kernel things, which when Render drops his CAF sources, I'll start building a standalone as well for other ROMs that switch over to the CAF base.
goast said:
Um.. Sprint lollipop has been released along with kernel code....
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
Really? I haven't seen it yet. Once Rashed gets the adsp images and bootstack from it, I'll start building for it.
Abrilabr said:
What does mean CAF based kernel? No need for JB bootloader a better battery/performance?? based on official LP kernel?
Click to expand...
Click to collapse
Caf = Code Aurora Forum
Thanks for sharing with us @tsunamical! One question, after flashing the lollipop bootstack, if we want to go back to another rom, would we need to reflash the jb bootstack first? If we have a backup through twrp, would it restore the jb bootstack during restore?
bps119 said:
Thanks for sharing with us @tsunamical! One question, after flashing the lollipop bootstack, if we want to go back to another rom, would we need to reflash the jb bootstack first? If we have a backup through twrp, would it restore the jb bootstack during restore?
Click to expand...
Click to collapse
Depends on your device. The vs980 for example, can use the KitKat bootstack minus the radio and bootloader.
If you need to use it now, then yes, you would need to revert as the 5.0 radio shouldn't work with 4.2 kernel based roms
Twrp will be iffy with restores. Blastigator did add the option to save modem and sensor info in twrp with backups if you select it, I've not tested it myself, but on paper it should.
Edit: it would not save the bootstack
Really? I haven't seen it yet. Once Rashed gets the adsp images and bootstack from it, I'll start building for it.[/QUOTE]
Yep, I'm on it now... Well if u do get us a aosp lollipop rom using lollipop kernel and all that, you'll be the first
Sent from my LG-LS980 using XDA Free mobile app
So just to be clear, D800, we DO flash the lollipop bootstack, and radio?
jcmaddox1 said:
So just to be clear, D800, we DO flash the lollipop bootstack, and radio?
Click to expand...
Click to collapse
Just flash the bootstack and you should be set.
tsunamical said:
Just flash the bootstack and you should be set.
Click to expand...
Click to collapse
Flashed and booting! Optimizing apps! Woop Woop!
jcmaddox1 said:
Flashed and booting! Optimizing apps! Woop Woop!
Click to expand...
Click to collapse
May want to roll back for now, nasty bug found by someone, will be releasing new builds tomorrow with a fix included.
tsunamical said:
May want to roll back for now, nasty bug found by someone, will be releasing new builds tomorrow with a fix included.
Click to expand...
Click to collapse
Yeah - for me it's stuck at "starting apps" and the setup menu shows behind the popup, then crashes. Any way we could get a hotfix?
If i were to roll back - should I be using a jellybean or kitkat bootstack? or can i just leave as is for other roms such as Rashed97s CM12?
F320 can test .Are uploading?
jcmaddox1 said:
Yeah - for me it's stuck at "starting apps" and the setup menu shows behind the popup, then crashes. Any way we could get a hotfix?
If i were to roll back - should I be using a jellybean or kitkat bootstack? or can i just leave as is for other roms such as Rashed97s CM12?
Click to expand...
Click to collapse
It should optimize apps properly, but the bug totally screws SystemUI over, no hotfix since it was a library issue, just going to recompile and release a build tomorrow. I would go back to the JB bootstack until tomorrow unless you had a nandroid, and if you're using one of Rashed's CAF builds then yes you can leave it, but if it isn't explicitly labelled CAF, then no, reflash JB bootstack.
liusi522 said:
F320 can test .Are uploading?
Click to expand...
Click to collapse
I don't need any other testers and it will come out at another time, don't ask for ETAs.
Hi bacon people!
This is my modified kernel with some kernel optimizations and some compiler optimizations.
The goal of abyss is to achieve improved performance/battery without the cost of stability.
I will not be overhauling this project with changes that are not logical to add.
This kernel should work on the latest 7.x.x roms like CyanogenMod and any other AOSP based rom.
It will not work with "CAF" based roms (any roms using Sultanxda trees).
It will not work with Omni based roms either (any roms using Omni trees).
It will not work with AOSParadox based roms too.
How does one achieve this?
- build kernel with an optimized toolchain
- use compiler optimization flags (experimental)
- remove redundant code
- improve existing code with more efficient code
- reduce/increase speed of timers (depends on what type of function)
- etc. (most are not easy to explain)
Is there actually a performance improvement?
With all the changes added up, there should be. Whether or not one notices the difference is another thing.
Personally, I do feel the performance difference on my Moto G 2013; it is easier to notice the difference with lower level specs..
For those interested in how the kernel optimizations will benefit/work, please look at my github source and read the commit messages.
For those interested in how the compiler optimizations/hacks will benefit/work, please look at this article.
Downloads:
Latest build
BasketBuild
Source:
GitHub
I do not mind if there's some non-development/off-topic discussion here, just no discussion about other works that is nowhere near related to mine.
Also, please refrain from comparing works here; it really kills the spirit of development. Go do that in some other thread.
XDA:DevDB Information
abyss kernel for aosp roms, Kernel for the OnePlus One
Contributors
YoshiShaPow
Source Code: https://github.com/abyss-kernels/bacon
Kernel Special Features:
Version Information
Status: Stable
Created 2015-08-25
Last Updated 2016-12-09
Don't like the defaults?
Use Kernel Adiutor to change the settings!
Frequently Asked Questions:
Is this a custom kernel?
I was asked this question once, and it posed as a real good question. I do not consider abyss to be a "custom kernel" per se, but more so as a modified kernel. The patches and features that go into this kernel do not make it customizable. What they do is improve what has already been implemented. It is like swapping a car's engine for a better one rather than just adding LED flooring lights and fancy car mats.
Can you add [this] and [that] feature?
Something I pride myself with this kernel is that it does not have a bunch of random, useless features or patches mashed into it. Everything put into this kernel is thought out well and tested. I see a lot of works being made popular because it has [this] and [that] feature when really, it's nothing revolutionary. As a matter of fact, most things added to any kernel will not make it 5x better than any other kernel. Most of the time, simple is better; and in this case it definitely is!
Main Patches and Features:
- updated security patches (dirty cow vulnerability resolved)
- updated sched drivers
- KCAL Control Driver
- backported random from Linux 3.16+
- kexec hardboot patch for Multirom
- Abyss Optimizations (compiler)
- disabled debugging for more performance throughout
- lots of patches for better performance here and there... too many to list
- simplified thermal driver (more aggressive while maintaining performance)
- USB Force Fast Charge
- Android N ready!
How to install:
Place zip on to your internal storage
Place current ROM zip on to your storage
Boot into TWRP recovery
(If you're coming from a different kernel, dirty flash current ROM)
Flash kernel zip
Reboot
@YoshiShaPow thank you for sharing your work..
A heads up.. I used flashify to flash it on Euphoria CAF version.. And it booted fine.. All seems ok.. Would report in case of any issues.. Works well as of now.. Using smartmax eps..
Cheers..
Sent from my A0001 using Tapatalk
---------- Post added at 09:18 AM ---------- Previous post was at 09:15 AM ----------
You can add to the op that the kernel boots fine mein euphoria caf build..
Sent from my A0001 using Tapatalk
flashify user, boots on sultans latest cm12.1 from 08/24. FYI. Cheers
Boots on Bliss uber as well..!! M back to euphoria caf now..
Lets call it fusion caf kernel.. For all the hard work in slimsaber and since it began with slimsaber.. Just saying [emoji14]
Sent from my A0001 using Tapatalk
Right on time my friend. Thanks for the kernel. will test it
drdrewdown said:
flashify user, boots on sultans latest cm12.1 from 08/24. FYI. Cheers
Click to expand...
Click to collapse
geekynoob said:
Boots on Bliss uber as well..!! M back to euphoria caf now..
Lets call it fusion caf kernel.. For all the hard work in slimsaber and since it began with slimsaber.. Just saying [emoji14]
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
geekynoob said:
@YoshiShaPow thank you for sharing your work..
A heads up.. I used flashify to flash it on Euphoria CAF version.. And it booted fine.. All seems ok.. Would report in case of any issues.. Works well as of now.. Using smartmax eps..
Cheers..
Sent from my A0001 using Tapatalk
---------- Post added at 09:18 AM ---------- Previous post was at 09:15 AM ----------
You can add to the op that the kernel boots fine mein euphoria caf build..
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
All added, many thanks to the testers!
About the name, I am looking to keep it themed close/related to my username.
YoshiShaPow said:
Off-Topic Conversation:
Do any users play CS:GO? Add me on Steam and let's play
Click to expand...
Click to collapse
@CraZY_BoY^
EasyGoingXD said:
@CraZY_BoY^
Click to expand...
Click to collapse
CSGO!!!!?!??? DD
Who said CS:GO?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
not booting for me.. bisspop caf..tried both flashify n fastboot methods
No flashable zip mate?
madsponge26 said:
No flashable zip mate?
Click to expand...
Click to collapse
He said it's coming soon. Did you read the first post?
---------- Post added at 06:30 PM ---------- Previous post was at 06:29 PM ----------
@YoshiShaPow I think you should just call it "Egg kernel" given that you're a Yoshi
Isn't it the same kernel which you have implemented in your latest CAF build?
Which toolchain are you using? UBERTC 5.2.1?
@YoshiShaPow
HEY!
Glad you decided to come on back! Just FYI, I was able to get CAF working with AnyKernel. I will make sure my source is up to date so you can use if you want. Regardless glad you decided to take a stab at kernel building again and can't wait to see what you cook up!
Render
@YoshiShaPow how about the names "eggs and bacon"
Anyways if you need an Legendary Eagle friend, you can que with me and my buds for a 4-5 man crew ;D
One request bro, can you add Boeffla's capacitive keys backlight control? Also, are you planning to add a custom UKM for your kernel or are you only planning kernel auditor support?
CraZY_BoY^ said:
Who said CS:GO?
View attachment 3450819
Click to expand...
Click to collapse
_ASSASSIN_ said:
@YoshiShaPow how about the names "eggs and bacon"
Anyways if you need an Legendary Eagle friend, you can que with me and my buds for a 4-5 man crew ;D
Click to expand...
Click to collapse
Bwaahaha I'm Legendary Eagle too! But I don't want to make my main account public hehe...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is this ?
This is a Cyanogenmod 11.0 LineageOS 11.0 build, aimed to be slim, stable and fast.
Why ?
There are already plenty kk roms out of there, there's no need for an other one. Right ?
The last cm nightly is already pretty old and the cm's servers are down.
I wanted to have a kk rom with the latest security patches and an updated kernel to use as a daily driver.
Keep in mind that this is a personal build, I just thought it might be useful to some of you.
Features:
Android 4.4.4
Latest security patches
Same kernel as 6.x roms plus security patches
Bigmem
720p Bigmem patch (It should work)
CMC
Various:
Great as a daily driver
I won't add any feature
Don't ask for updates
I will fix bugs if I can
How to install
If you don't want to have any problem, doing a clean install in recommended, especially if you're comming from > kk (partition layout isn't the same)
- Go back to stock using odin/heimdall (https://forum.xda-developers.com/showthread.php?t=2434225
- Get root access using cf-auto-root
- Go into cwm and do a factory reset
- Flash the rom
- Reboot
- If you get problems do a factory reset and wipe cache again
Links
ROM
wiki
XDA:DevDB Information
LineageOS 11, ROM for the Samsung Galaxy S I9000
Contributors
Coldwindofnowhere
Source Code: https://github.com/LineageOS
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Version Information
Status: Stable
Created 2017-04-13
Last Updated 2017-04-13
Great work! Thank's! I will test it!:good:
I made MOD on this ROM and called it Lineoge OS 11 Black! It have some changes and microG support.
LINK to post.
LINK to microG
NEW 2018 Multilanguage MOD link https://forum.xda-developers.com/showpost.php?p=75929248&postcount=179
works flawlessly, thank you for keeping our phone alive
Update: 720p playback not working
Thx! gonna try it!
JuniorCaesar said:
works flawlessly, thank you for keeping our phone alive
Update: 720p playback not working
Click to expand...
Click to collapse
Have you tried using VLC to play the 720 videos? I normally use it in CM 10.2.1
BTW is this Rom capable to record video?
---------- Post added at 08:37 PM ---------- Previous post was at 08:26 PM ----------
Coldwindofnowhere said:
What is this ?
This is a Cyanogenmod 11.0 LineageOS 11.0 build, aimed to be slim, stable and fast.
Why ?
There are already plenty kk roms out of there, there's no need for an other one. Right ?
The last cm nightly is already pretty old and the cm's servers are down.
I wanted to have a kk rom with the latest security patches and an updated kernel to use as a daily driver.
Keep in mind that this is a personal build, I just thought it might be useful to some of you.
Features:
Android 4.4.4
Latest security patches
Same kernel as 6.x roms plus security patches
Bigmem
720p Bigmem patch (It should work)
CMC
Various:
Great as a daily driver
I won't add any feature
Don't ask for updates
I will fix bugs if I can
Links
ROM
wiki
XDA:DevDB Information
LineageOS 11, ROM for the Samsung Galaxy S I9000
Contributors
Coldwindofnowhere
Source Code: https://github.com/LineageOS
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Version Information
Status: Stable
Created 2017-04-13
Last Updated 2017-04-13
Click to expand...
Click to collapse
Seems very intresting, I will give it a try for sure. TY
arnirx said:
Have you tried using VLC to play the 720 videos? I normally use it in CM 10.2.1
BTW is this Rom capable to record video?
---------- Post added at 08:37 PM ---------- Previous post was at 08:26 PM ----------
Seems very intresting, I will give it a try for sure. TY
Click to expand...
Click to collapse
Yes it does video recording but you cannot play it because 720p is not working lol
If you turn memory to XL mode, then video 720p will playback properly. Use DevilTools for it.
jupiter5700 said:
If you turn memory to XL mode, then video 720p will playback properly. Use DevilTools for it.
Click to expand...
Click to collapse
Hello, i use Devil's kernel manager (is it the same thing of deviltools ?) to configure memory to XL and to Bigmem but after reboot nothing change. I'm still on stock memory use.
I've got this log message :
"sh:<stdin> : "Can't create /data/local/devil/bigmem : No such file or directory"
Do i missed something ?
harnis said:
Hello, i use Devil's kernel manager (is it the same thing of deviltools ?) to configure memory to XL and to Bigmem but after reboot nothing change. I'm still on stock memory use.
I've got this log message :
"sh:<stdin> : "Can't create /data/local/devil/bigmem : No such file or directory"
Do i missed something ?
Click to expand...
Click to collapse
Try to use DevilTools app https://forum.xda-developers.com/showthread.php?t=2276036 Turn memory to second or third position, then reboot
jupiter5700 said:
Try to use DevilTools app https://forum.xda-developers.com/showthread.php?t=2276036 Turn memory to second or third position, then reboot
Click to expand...
Click to collapse
Thanks. It seem's working. With the second position i've got 394 Mb and with the third position 407Mb.
Have you got some others tips and tricks to correctly use deviltools to get get more fast ?
I tried to overclock Cpu at 1400 Mhz but it don't work properly. My phone reboot.
Thank you again for your help.
harnis said:
Thanks. It seem's working. With the second position i've got 394 Mb and with the third position 407Mb.
Have you got some others tips and tricks to correctly use deviltools to get get more fast ?
I tried to overclock Cpu at 1400 Mhz but it don't work properly. My phone reboot.
Thank you again for your help.
Click to expand...
Click to collapse
You can use cyanogenmod's performance control for that
This is the best rom i ever tried, great work ?
But my phone has the internal memory broken, how can i swap the internal memory with the sdcard in this rom?
diiogo53 said:
This is the best rom i ever tried, great work
But my phone has the internal memory broken, how can i swap the internal memory with the sdcard in this rom?
Click to expand...
Click to collapse
You need Neat Kernel or DomnesuKernel to do it.
https://forum.xda-developers.com/showpost.php?p=50154814&postcount=2
https://forum.xda-developers.com/showthread.php?t=2641142
https://forum.xda-developers.com/ga.../kernel-domnesukernel-galaxy-s-i9000-t3205937
jupiter5700 said:
You need Neat Kernel or DomnesuKernel to do it.
https://forum.xda-developers.com/showpost.php?p=50154814&postcount=2
https://forum.xda-developers.com/showthread.php?t=2641142
https://forum.xda-developers.com/ga.../kernel-domnesukernel-galaxy-s-i9000-t3205937
Click to expand...
Click to collapse
Bootloop with both kernel
diiogo53 said:
Bootloop with both kernel
Click to expand...
Click to collapse
Hmmmm... Try to wipe data\factory reset then reboot after that.
jupiter5700 said:
Hmmmm... Try to wipe data\factory reset then reboot after that.
Click to expand...
Click to collapse
Nothing...
diiogo53 said:
Nothing...
Click to expand...
Click to collapse
It is very strange... Both kernels work fine for me, but i try they on pure CM rom.
jupiter5700 said:
It is very strange... Both kernels work fine for me, but i try they on pure CM rom.
Click to expand...
Click to collapse
I try the cm11 and i can swap the memories, but the rom isn't so fast as lineage...
diiogo53 said:
I try the cm11 and i can swap the memories, but the rom isn't so fast as lineage...
Click to expand...
Click to collapse
I think Neatkernel and Domnesukernel cant start on LineageOS11 due to kernel cant recognise android version. May be build.prop editing can help you.
jupiter5700 said:
I think Neatkernel and Domnesukernel cant start on LineageOS11 due to kernel cant recognise android version. May be build.prop editing can help you.
Click to expand...
Click to collapse
And what do i have to edit in the build.prop?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ABOUT
Poison kernel is mainly an Custom Kernel.Which Is Upstreamed To latest kernel and with some kernel features.Though it is early stage, Stay tuned for more Updates.
Warning
Flash Kernel At your own risk, i m not responsible for kind of damage
Changlog:
V1.0:
Upstreamed kernel from 3.10.49 to 3.10.108
Lattest CAF Merged
USB Fast Charging Enabled
Performance Booster added
Battery improves
V1.1:
Compiled with Linaro (with Great Optimiztion )
Blu_Active Governor Enabled
Spectrum Support Added
Color Control Feature Added
CPU HOTPLUG (AutoSMP) Enabled
More Battery Friendly
v2.0
Added Backlight Dimmer
New & better Impulse Governor added
new I/O ( Sio and FIOPS)
Added boeffla wakelocker
TouchBoost Disabled By Default
V3.0
Sound Control
PowerSuspand
Slimbus OC
Exfat Support For Sdcard
qnovo Support (For Decrease temp while charging)
OTG Bug Fixed
Hexa-core mode (select intractive gov and enable hexa-core)
and More Battery Savings and performance
V4.0
Compiled With Linaro optimized Toolchain
Added Hyper Governor (Smart Gov for battery and parformance)
Added Faux Audio Control
Added Adreno Idler
touchboost Disabled
Deep Sleep
Intractive Gov Call back issue
OTG Working
Battery Drained Issue and performance Increased
V4.1
Performance Boosted Upto 70%
battery improved
Slim Oc readded
gives faster Performance
V5.0
USB Fast Charge Added
Selinux Permessive on Kernel
New & Best Governor Added(Alu_card,interactive_pro)
Fixed Hotplug Reboot Issues on All Model
Added new Hotplugs (Alu_card hotplug,MSM_Hotplug)
Added New I/O: ZEN IOSCHED
Enabled ARCH Power
Performance And Battery Increased
HOW TO Flash
Download kernel Zip file from link
Back up your Pertition
Go to twrp recovery
Flash Zip
Reboot Your Phone
Config:
RooT Must Need And Install EX Kernel Manager Kernel Manager-Mod APK from XDA
Follow This guide To setup Governor,and more Guide for Kernel
And Color Control go to screen and choose u r screen settings then see magic
DOWNLOAD:
Z00T
V1.1:Poison_Kernel v1.1
v2.0:Poison-Reborn v2.0
v3.0: Poison_V3.0
V-4.0:Poison-Rebased 4.0
v4.1: Fixed_v4.1
v5.0:Poison_v5.0
Z00L
v1.1:Poison_v1.1
v2.0:Poison-reborn v2.0
v3.0:Poison_v3
----------------------------------------------------------------------------------------------------------------------
v-4.0:Poison-Rebased 4.0
v-4.1:Fixed_v4.1
V5.0:Poison_V5.0
Note/Solution:
Hotplug kernel-auditor open kernel-auditor->go to cpu hotplug ->decide which hotplug u wanna use(ex:alu_card)->go to alu_card option->Set min and max cpu online 4 -> now enable alu_card option ->enable apply on boot ->reboot->now set cpu as u want (prefer to use EX kernel manager )
EXKm users follow these on CPU ->Core control(Big cluster)-> Set min core 4 and Max core online 4 -> now choose Hotplug-> enable apply on boot->reboot ->now set cpu as u want
Credits and Thanks:
@ luk1337
Savoca
engstk
faux123
frap123
Nathan Chancellor
Abhishek
@Vipul Jha
@ pokipokipxorn,
@TheImpulson,
All Asus Users
Asus
Lineage OS
XDA:DevDB Information
Poison , Kernel for the Zenfone 2 Laser
Contributors
Riad khan
Source Code: https://github.com/Poison-Kernel/Poison_Kernel_Asus_msm8916
Kernel Special Features: Battery Efficient,Upstreamed, and many more
Version Information
Status: Stable
Current Stable Version: v5.0
Stable Release Date: 2017-12-19
Created 2017-11-08
Last Updated 2017-12-21
Installed this on Aim Rom going to test the battery and performance during the next few days
Should I do any configuration in Kerbal audiutor?
---------- Post added at 11:06 PM ---------- Previous post was at 11:05 PM ----------
Gerard15799 said:
Should I do any configuration in Kerbal audiutor?
Click to expand...
Click to collapse
*Kernel
dcduartee said:
Installed this on Aim Rom going to test the battery and performance during the next few days
Click to expand...
Click to collapse
U need to config on kernel auditor ..I will update op asap with details
Gerard15799 said:
Should I do any configuration in Kerbal audiutor?
---------- Post added at 11:06 PM ---------- Previous post was at 11:05 PM ----------
*Kernel
Click to expand...
Click to collapse
Yes u need
Riad khan said:
Yes u need
Click to expand...
Click to collapse
What is the configuration u recommend?
Z00L added
I wonder how's the performance on C00L with sd 615? I'll try this kernel. Please continue this project.
raiden_1115 said:
I wonder how's the performance on C00L with sd 615? I'll try this kernel. Please continue this project.
Click to expand...
Click to collapse
its on beginning stage ,,will get more on further Update:good:
you sure this gets flashed to recovery?
i did that and phone wouldn't boot.
i had to flash twrp thru adb/fastboot and restore to get the phone to boot again.
Thanks for the Great work .. Hope new features added soon
---------- Post added at 03:09 AM ---------- Previous post was at 02:42 AM ----------
Please made 2 more release .. One naugat based and Stock MM based
beenkenobee said:
you sure this gets flashed to recovery?
i did that and phone wouldn't boot.
i had to flash twrp thru adb/fastboot and restore to get the phone to boot again.
Click to expand...
Click to collapse
100% sure..even users booted by that..its for oreo roms..not for nougat
Is this kernel have any bug?
beenkenobee said:
you sure this gets flashed to recovery?
i did that and phone wouldn't boot.
i had to flash twrp thru adb/fastboot and restore to get the phone to boot again.
Click to expand...
Click to collapse
You flash it to boot partition not recovery
i flash this kernel to recovery partition, and i lose twrp root after reboot,...cannot enter recovery ... strange things happen, after booting several times, root is present, so i can flash twrp using rashr ... why this happens?
satriahitam said:
i flash this kernel to recovery partition, and i lose twrp root after reboot,...cannot enter recovery ... strange things happen, after booting several times, root is present, so i can flash twrp using rashr ... why this happens?
Click to expand...
Click to collapse
Bro flash this kernel on boot partition....not recovery...
satriahitam said:
i flash this kernel to recovery partition, and i lose twrp root after reboot,...cannot enter recovery ... strange things happen, after booting several times, root is present, so i can flash twrp using rashr ... why this happens?
Click to expand...
Click to collapse
that's what happend to me.
get into fastboot and reflash twrp thru adb.
then do a restore or flash a new rom.
btw, the instructions in the op need to be changed.
beenkenobee said:
that's what happend to me.
get into fastboot and reflash twrp thru adb.
then do a restore or flash a new rom.
btw, the instructions in the op need to be changed.
Click to expand...
Click to collapse
changed sir
Wow. Glad to see that you work on kernel too.. Hope it rocks the same way as your ROMs do. Thanks a lot dev @Riad khan. Keep it up.
BTW, it would be great if you could make a nougat version too as there are number of solid nougat ROMs available to which this kernel can coupled with (only in case if you have enough of free time).
kunalchitara said:
Wow. Glad to see that you work on kernel too.. Hope it rocks the same way as your ROMs do. Thanks a lot dev @Riad khan. Keep it up.
BTW, it would be great if you could make a nougat version too as there are number of solid nougat ROMs available to which this kernel can coupled with (only in case if you have enough of free time).
Click to expand...
Click to collapse
True.