Related
EDIT: Sorry, this post wen't to completely wrong place. Hope some mod can move this to right section.
I know. There's number of similar threats. I have read them all. Or at least feels like it.
I managed to soft brick my sgs2. I was playing with this new lol boot (dual boot app) from market. I think I pushed something wrong in this app. After that my intention was to make a CWM backup before I start to play seriously with lol boot. At the second I pressed backup from the menu, my phone shut down. Now I'm in a sitsuation whre I can't enter recovery mode. There's just this Samsung Galaxy logo. At the time I had CheckRom v4 installed.
My intention was to flash stock rom via odin. I can enter to download mode just fine BUT odin or kies isn't able to connect to phone. Kies is recognizing the usb connection, but fails to connect it properly. Here's a list what I've tried so far:
- Restart PC (100x)
- Restart Odin (101x)
- Restart Kies
- Reinstall USB Drivers (with Kies and without)
- Trying different computer which has never seen Kies or any Samsung USB drivers
- Reinstalling Windows (W7 x64)
- 3 different USB cables (2 stock Samsung)
- Different USB ports
- Also Nexus S USB drivers as mentioned on another thead in XDA
- Starting odin after USB connection, and before
- Googling with any keywords I have come up
Is there anything else I can do for now?
you mean when you try to connect to odin there is no yellow square ?
maybe try to remove battery for + 90 sec and try to enter in odin ?
ps in this situation you must forget kies since its barely work when everything is fine with the phone ...
Thanks for your reply. Odin doesn't 'do' anything when i connect my device. I'm using version 4.43. When I connect s2, windows install two drivers, Samsung Mobile USB CDC Composite Device and Samsung Mobile USB Modem. I also tried taking battery off. Actually the battery wasn't attached for 6 hours, still no success.
I didn't see this in your list, but have you tried entering download mode and connecting?
Sent from my GT-I9100
can you enter recovery? which recovery you have? Clockwork? 2e, 3e?
Just trying to feel out your situation...
Guys. I think there is some Android God that came to help me. After ~36 hours of googling, crying and throwing the phone to the wall, I've managed to solve my problem! As I was googling cheap shotgun for me, I had a vision. Why not, let's try older odin. The solution was v1.83. And right when I plugged in my phone with this odin, it got recognized! At the same second! Nuff said, I'm satisfied. And do you know what is the best part? I flashed with original stock rom and every app, every launcher and so on was STILL WORKING and running!
Thanks to everyone. I'll be more careful next time!
EDIT: How the heck the custom binary counter went to zero? I was thinking its only possible with usb jig?
not older odin! but the one u need for sgs2 (and 1) only use odin 3 v. 1.83 or v. 1.3.
The one you said IS NOT FOR YOUR PHONE. Sorry I missed that text.
So if I understood you correctly, u are saying that I flashed my phone with wrong version of odin (1.83) ? Sorry, I'cant understand english too good, so can you say your point more literally and s_l_o_w_l_y? Thanks
I only use odin3 v1.3 or odin 3 v.1.83.
As far as I know, you cannot use anything else, since it is not made for your device!
I might be wrong, if so, somebody correct me.
Sent from my GT-I9100
So if you're correct on this, the reason why I couldn't get my phone recognized was the wrong version of odin?
pazzio said:
Guys. I think there is some Android God that came to help me. After ~36 hours of googling, crying and throwing the phone to the wall, I've managed to solve my problem! As I was googling cheap shotgun for me, I had a vision. Why not, let's try older odin. The solution was v1.83. And right when I plugged in my phone with this odin, it got recognized! At the same second! Nuff said, I'm satisfied. And do you know what is the best part? I flashed with original stock rom and every app, every launcher and so on was STILL WORKING and running!
Thanks to everyone. I'll be more careful next time!
EDIT: How the heck the custom binary counter went to zero? I was thinking its only possible with usb jig?
Click to expand...
Click to collapse
gratz!
to reset your binary, there is only one way to do it. u are right, usb jig.
however, beware, i read somewhere saying that GB ver 2.3.4 onward has a new version of bootloader which prevent usb jig from resetting the counter, which mean samsung is trying to lock the bootloader now. however, flashing the old bootloader still helps (claim by others).
Hello I need help with my phone, can't find a solution. What I tried to do was to install new ROM to my phone. I wiped cache, dalvick cache and nothing else. Tried to install the new ROM but it showed me a error "Status 7" and showed "Installation aborted". Then I rebooted the phone and it asked me if I want to fix something, becouse its lost , but I dont remember what. I clicked Yes, my sreen went black. I pulled the battery out and now, I cant start it, the phone doesn't vibrate when I push the power button I can't go into recovery. Doen't respond to anything It just stays black... Can you guys help me, please... I really don't know what I need to do.
The rom I tried to install: http://forum.xda-developers.com/galaxy-s3/development/rom-efextreme-lite-rom-v2-0-t2786248
Phone: SGH-I747
that ROM is for the S3 i9300/i9305. souds like a brick to me. here is a thread that may help get you started. you'll prob. need to know which android version you were on and your bootloader/modem version.
good luck
http://forum.xda-developers.com/showthread.php?t=2934476
http://forum.xda-developers.com/showthread.php?t=2272285
err on the side of kindness
mrrocketdog said:
that ROM is for the S3 i9300/i9305. souds like a brick to me. here is a thread that may help get you started. you'll prob. need to know which android version you were on and your bootloader/modem version.
good luck
http://forum.xda-developers.com/showthread.php?t=2934476
http://forum.xda-developers.com/showthread.php?t=2272285
err on the side of kindness
Click to expand...
Click to collapse
When I commenct my phone via usb cable to pc Odin see's it... Can you tell me what to do next?
no, sorry. hopefully someone more knowledgeable will chyme in.
err on the side of kindness
Svetlozar92 said:
When I commenct my phone via usb cable to pc Odin see's it... Can you tell me what to do next?
Click to expand...
Click to collapse
So it appears on a com port in Odin? What stock ROM was on your phone before you flashed a custom ROM?
Yes but odin only says: <ID:0/004> SetupConnection.. and don't continue... I don't remember the ROM, but it was custom ROM. Do you think with SD card I can make it running? I got a SD card, got the files, but don't know how to transfer the files to the SD card, becouse I don't have adaptor to my PC... Can anyone make the card, copy the files and send them to me, so I just move them to my SD card and give it a try?
So the phone does show up in Odin on a com port? Can you post a screen shot of the Odin screen after you try flashing?
What does your phone say when in download mode?
What ROM are you trying to flash in Odin?
audit13 said:
So the phone does show up in Odin on a com port? Can you post a screen shot of the Odin screen after you try flashing?
What does your phone say when in download mode?
What ROM are you trying to flash in Odin?
Click to expand...
Click to collapse
I cant get it to download mode, its hard bricked, cant use buttons, cant get to recovery or download its turned off I think...
I see the phone is recognized in Odin on Com 4 which leads me to believe it is in download mode. When you connected the phone to your computer, did you see anything on the phone's screen?
It may be failing because you are trying to flash a 4.1.1 bootloader onto your phone which may have a 4.3 or 4.4.2 bootloader. Do not check the re-partition option and try Odin 3.07.
Odin v3.07 doesnt recognise it.
Try uninstalling and reinstalling the drivers. If it doesn't appear in Odin 3.07, you may have to have the phone jtagged.
Okey guys my phone is working normaly now. When I installed the unbrick image on the SD card it booted from it, managed to make it to download mode, but I had problems with odin. So I just put the last ROM i was with. I pushed the power button clicked restart -> recovery and from then I installed the ROM , but the problem still remained. THe phone was booting only with the SD card, so I looked for bootloader, downloaded it, put it on the phone and bam everything was okey then. Thanks for all who helped me with this, hope this post will help to other guys with bricked phones
Dear all. I have a note II that has gone wild. The phone was working fine but then I received a note 4 and put the note 2 aside. Then I was trying to install root and was able to do so by installing TWRP V2.8.3 and everything went smooth and the phone was rooted. I then used the phone for a while but switched to the note 4 after. Now, 5 months after, I wanted to check something on my olde note II. I charged the phone and switched it on but it was stuck on the Galaxy note II screen I rebooted then rebooted but still the same. I went in the TWRP recovery to try to do something but I was not able to because it says that it cant mount storage, cant mount efs, cant mount data, cant mount cache and cant mount system.
Then I have decided to install the firmware image from zipped file but that did not work as it sees that the internal and external storags are 0 and cant mount them.
Then I opted to try and install the firmware PDA through Odin but that also did not work as Odin was not able to detect the phone. Now I'm clueless and not sure what to do the only thing I'm able to do is boot in TWRP recovery and that is all. Can any one help.
My phone had the latest official rom from samsung the 4.4.2
Please help
classic, just search. there is a thread with tutorial how to get your n2 back to life. you could also have sds, but try different odin and flash with pit
Ok now I'm in a worse situation. I have managed to get to the download mode and connected it to ODIN and tried to flash with the stock rom but at the end of the writing process it failed and started to get a message on the phone to connect my device to kies and try again. I tried that but did not do anything. Then I tried Odin again but this time I unticked the auto reboot. then clicked start. The same thing happened as before and writing failed now though my phone is blank it does not show anything and it does not want to turn on and no LED that is turning on nor the charging icon. I searched the net and someone suggested that the battery is damaged. I replaced the battery but still no go. Please I really need to get that phone back alive. I think I bricked it. any ideas or directions to help me with this annoying case. I cant even boot to recovery nor download please help
No one can help
sambosat said:
No one can help
Click to expand...
Click to collapse
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
sambosat said:
No one can help
Click to expand...
Click to collapse
sambosat said:
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
Click to expand...
Click to collapse
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Christopher11 said:
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Click to expand...
Click to collapse
As I said when I remove the battery and insert it back the phone remains blank no response to any button pressed.
What I did is that my phone was stuck on opening screen samsung screen. Then someone suggested to flash it with the stock rom. So I went to Sammobile site and downloaded the latest firmware. I tried to install it to my phone using ODIN and just before the end. ODIN failed. I tried it the second time and the same happened. then the third time I read that I have to untick auto reboot. I did and tried ODIN for the 3rd time and on the third trial I got the same fail message and then I wanted to boot into download mode for the forth time but this time the phone went dead and not responding to any button press. I hope that this explains the situation
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Christopher11 said:
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Click to expand...
Click to collapse
No worries bro. At least you are trying. I have never seen this before either and I'm stumped and where I'm I dont think I can find any samsung pro shop. All what they are going to say is the motherboard is dead and you need to change it. I do have another phone but I hate it when a devise does this to me
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
...
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
update!!
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
update
chatovishious said:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
Click to expand...
Click to collapse
spammy l said:
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
Click to expand...
Click to collapse
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Gladi80rPrincess09 said:
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Click to expand...
Click to collapse
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
help me!
chatovishious said:
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
Click to expand...
Click to collapse
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Gladi80rPrincess09 said:
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Click to expand...
Click to collapse
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Thank you! progress/update
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Gladi80rPrincess09 said:
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Click to expand...
Click to collapse
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
question
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
CCallahan said:
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
Click to expand...
Click to collapse
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Gladi80rPrincess09 said:
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Click to expand...
Click to collapse
Can you get the device back in download mode?
update!!
CCallahan said:
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
---------- Post added at 10:59 AM ---------- Previous post was at 10:54 AM ----------
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Gladi80rPrincess09 said:
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Click to expand...
Click to collapse
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
thank you for the help!!
chatovishious said:
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
Click to expand...
Click to collapse
i got it to work!!!
Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Hey! Still stuck?
Poebat said:
Hey! Still stuck?
Click to expand...
Click to collapse
No according to the post above yours.
koop1955 said:
No according to the post above yours.
Click to expand...
Click to collapse
K. Sometimes something appears to work and then fails :/ happens sometimes
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Gladi80rPrincess09 said:
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Click to expand...
Click to collapse
nothing wrong with rooting if you know what you're doing. ?
Sent from my SM-G900P using Tapatalk
alright guys im in a bit of a fix here . was trying to root and install cwm ,everything went fine until i started the flash on odin, it got stuck at .system image in the flash process. so i unplugged the cable. now all i have i a green screen with a big white triangle with exclamation matk inside with text underneath stating there was an error updaing software and to use the emergency recovery function in smart switch app on a pc. when i try to do that i get message 'device not supported' . any ideas how i can get out of this fix and get my device sorted? i cant get into download mode by pressing the buttons, im just stuck on the green screen with triangle.
indup said:
alright guys im in a bit of a fix here . was trying to root and install cwm ,everything went fine until i started the flash on odin, it got stuck at .system image in the flash process. so i unplugged the cable. now all i have i a green screen with a big white triangle with exclamation matk inside with text underneath stating there was an error updaing software and to use the emergency recovery function in smart switch app on a pc. when i try to do that i get message 'device not supported' . any ideas how i can get out of this fix and get my device sorted? i cant get into download mode by pressing the buttons, im just stuck on the green screen with triangle.
Click to expand...
Click to collapse
Close Odin - re-start odin - put all the stock firmware files in their respective slots in odin - plug into your phone - and start odin - it should work - it will help you get back to stock.
Once you are rebooted in stock, go thru normal setup - double check to maker sure the Bootloader unlock is still greyed out - and then start over and do it again.
yuo may have had a bad file so I would suggest getting new files for root flash - install magisk ap - go thru the process of patching a new AP file - download the new TWRP posted by Dr Ketan (It is in the TWRP Folders from the TWRP thread) and then try again.
Good Luck.
thanks for the reply, i have tried many times just as you have suggested but every time the flash doesnt move on from '.system image'
indup said:
thanks for the reply, i have tried many times just as you have suggested but every time the flash doesnt move on from '.system image'
Click to expand...
Click to collapse
Pardon my butting in as I haven't rooted a phone in years, but you might try combinations of different computer / USB port / USB cables. I often seemed to have cables that were usually fine but would mess up firmware flashing. Sometimes a particular USB port on my computer was iffy. And a computer that had been freshly set up and doesn't have much in the way of background processes running can help. Good luck.
ok thanks for the help. i tried another usb cable that wasnt usb-c to usb-c that came with the note 10+. i actually used the old style usb to usb-c cable that came with the note 8 and it worked first time and flashed in a few minutes. thanks again guys
Same thing worked for me. I could not flash with ODIN or restore via Smart Switch. Nothing would work but as soon as I switched to an old USB to USB-C cable, ODIN was able to flash the firmware. Man I thought my phone was bricked for sure.
Just an FYI, Samsung has a backup bootloader screen ( this is the 2nd or emergency bootloader, see this and you are really on your last chance to fix)- the screen you were stuck on. If you have this you MUST flash back the stock rom, (generally the last major update rom if it is a version change like 8 to 9 as the bootloader won't recognise older version). It MUST be matching in CSC or you may very well brick your device completely and as you found out, use the cable that came with the phone. Not all usb-c cables are the same...
Any other flash is generally destined for failure and will result in a Hard brick... Good reason to know what your CSC is...