I have CWM recovery now on my SGH-i747 with 4.3 rooted., so how can I get back STOCK Samsung Recovery so I can get the OTA Update for this phone?? It will download it but will not install it after reboot. So is it because of the CWM Recovery and that it does not have Stock Recovery??? Thanks for Help...
I believe you need stock recovery and an unrooted system.
audit13 said:
I believe you need stock recovery and an unrooted system.
Click to expand...
Click to collapse
DAA!!! Think article Titled "Restore Stock Samsung Recovery" But you said nothing about How to Restore Stock Samsung Recovery????
tailgunner9 said:
DAA!!! Think article Titled "Restore Stock Samsung Recovery" But you said nothing about How to Restore Stock Samsung Recovery????
Click to expand...
Click to collapse
This might help: http://forum.xda-developers.com/showthread.php?t=2722660
Or this: http://forum.xda-developers.com/showthread.php?p=50551942
I have an i747m so getting back to stock recovery can be done by flashing a stock ROM via Odin. Since you have the i747, I don't know of any method to get the stock recovery back on your phone.
Stock Recovery
audit13 said:
This might help: http://forum.xda-developers.com/showthread.php?t=2722660
Or this: http://forum.xda-developers.com/showthread.php?p=50551942
I have an i747m so getting back to stock recovery can be done by flashing a stock ROM via Odin. Since you have the i747, I don't know of any method to get the stock recovery back on your phone.
Click to expand...
Click to collapse
Surely there is easier way to get CWM recovery out of phone and back to Stock Samsung Recovery than having to install the entire Stock OS firmware????
tailgunner9 said:
Surely there is easier way to get CWM recovery out of phone and back to Stock Samsung Recovery than having to install the entire Stock OS firmware????
Click to expand...
Click to collapse
If there is such a method, I have never seen it.
audit13 said:
If there is such a method, I have never seen it.
Click to expand...
Click to collapse
Can I replace CWM Recovery for Stock Samsung 3e Recovery by flashing attached file in Odin 3.07 PDA on my i747 4.3???? Think all 3e Recovery are same no matter Android firmware? Or does it have to be from a 4.3 firmware? Are all 3e Recovery the same/
tailgunner9 said:
Can I replace CWM Recovery for Stock Samsung 3e Recovery by flashing attached file in Odin 3.07 PDA on my i747 4.3???? Think all 3e Recovery are same no matter Android firmware? Or does it have to be from a 4.3 firmware? Are all 3e Recovery the same/
Click to expand...
Click to collapse
I'm really not sure as I have never tried it before. To get back to stock, I have always used Odin to flash the entire ROM.
audit13 said:
I'm really not sure as I have never tried it before. To get back to stock, I have always used Odin to flash the entire ROM.
Click to expand...
Click to collapse
Wish someone had old i747 with 4.3 could try it and see if the file would get it back to Samsung Recovery 3e.
Seems like it would be possible since you can flash CWM & TRWP on one in place of the Samsung Recovery 3e
tailgunner9 said:
Wish someone had old i747 with 4.3 could try it and see if the file would get it back to Samsung Recovery 3e.
Seems like it would be possible since you can flash CWM & TRWP on one in place of the Samsung Recovery 3e
Click to expand...
Click to collapse
One issue with the 4.3 bootloader is the fact that you cannot simply flash back to stock using Odin if something goes wrong.
I think there are different versions of the stock recovery because updated versions of CWM and TWRP are required to flash newer custom ROMs. Also, some phones have different partition layouts. For example, Samsung phones have an EFS folder that can be accessed by an end user while this is not the case with a Nexus 4.
audit13 said:
One issue with the 4.3 bootloader is the fact that you cannot simply flash back to stock using Odin if something goes wrong.
I think there are different versions of the stock recovery because updated versions of CWM and TWRP are required to flash newer custom ROMs. Also, some phones have different partition layouts. For example, Samsung phones have an EFS folder that can be accessed by an end user while this is not the case with a Nexus 4.
Click to expand...
Click to collapse
Makes Sense!!!! May I ask you what is an "Easy Way" to get my i747 S3 4.3 to 4.4.2 since I cannot do the OTA I get and that you know WORKS. I am rooted with CWM for recovery.
tailgunner9 said:
Makes Sense!!!! May I ask you what is an "Easy Way" to get my i747 S3 4.3 to 4.4.2 since I cannot do the OTA I get and that you know WORKS. I am rooted with CWM for recovery.
Click to expand...
Click to collapse
I don't know of a sure-fire way. Whenever a person alters a phone's operating system using official or unofficial methods, there's always a risk that something will go wrong.
Since you have CWM, you could flash a custom Kit Kat ROM? If you want the latest TouchWiz ROM, have a look in the development thread. You'll need the newwest version of CWM to flash Kit Kat.
audit13 said:
I don't know of a sure-fire way. Whenever a person alters a phone's operating system using official or unofficial methods, there's always a risk that something will go wrong.
Since you have CWM, you could flash a custom Kit Kat ROM? If you want the latest TouchWiz ROM, have a look in the development thread. You'll need the newwest version of CWM to flash Kit Kat.
Click to expand...
Click to collapse
Rom Manager shows it has latest CWM Recovery. Did not really want a Custom Rom, always like the Stock ones on phone. Guess I am just stuck with 4.3 then. Thanks for your HELP!!!!!
tailgunner9 said:
Rom Manager shows it has latest CWM Recovery. Did not really want a Custom Rom, always like the Stock ones on phone. Guess I am just stuck with 4.3 then. Thanks for your HELP!!!!!
Click to expand...
Click to collapse
I prefer custom ROMs because they tend to perform better than a stock carrier ROM in my opinion. I prefer a dark UI which TW doesn't have.
Since you have a custom recovery, you could create a nandroid backup, flash a custom KK ROM, and try it out. If you don't like the custom ROM, restore your backup.
audit13 said:
I prefer custom ROMs because they tend to perform better than a stock carrier ROM in my opinion. I prefer a dark UI which TW doesn't have.
Since you have a custom recovery, you could create a nandroid backup, flash a custom KK ROM, and try it out. If you don't like the custom ROM, restore your backup.
Click to expand...
Click to collapse
That is very true I have backup of my 4.3. Unless something would screw up and could not get phone to life to get to Recovery. Just stay with the 4.3 Will never install CWM again and loose 3e Samsung Recovery where you can not get OTA Updates. Thanks again audit13!!!!! They should make CWM & TWRP where you can good back to Stock Samsung Recovery. My opinion...
tailgunner9 said:
That is very true I have backup of my 4.3. Unless something would screw up and could not get phone to life to get to Recovery. Just stay with the 4.3 Will never install CWM again and loose 3e Samsung Recovery where you can not get OTA Updates. Thanks again audit13!!!!!
Click to expand...
Click to collapse
Sorry I couldn't help you more. I went from a stock Bell Canada 4.1.2 ROM to a custom KK ROM.
Have a look in the development forum. You'll see some amazing KK ROMs. If you wait a while, I'm sure you'll see some custom KK TW ROMs based off a stock TW ROM and kernel.
Related
I wish to return to a rooted stock JB ROM from CM10.1 . CM10.1 is too buggy for me, and CM10 had one bluetooth bug in the final release that was kind of a game killer for me. I'd like to go back to stock JB but keep my custom recovery. The only files I've found for stock jellybean are full stock in that they'll flash over my recovery as well as my system. Does anyone know where I can find a root stock image that will let me flash just the system and keep my recovery like any other rom, so that I can flash back to CM10.1 when it is more stable. PS I am also on Linux and do not regularly have access to a windows machine so I do not have access to Odin, or Kies.
after you flash to stock just flash a recovery, that's what i've done.
also, this is the wrong section and you should search first.
sent from my I747
I searched and found only "One click" stock roms, and the "Fully Stock" roms. Neither of which solve my problem. Did you even read the portion of my post where I say I don't have access to Odin, or Kies or any of that? My only option for flashing is CWM. And I'm not sure how well overwritting CWM while CWM is flashing would work, but I don't think it would go well.
cehf said:
after you flash to stock just flash a recovery, that's what i've done.
also, this is the wrong section and you should search first.
sent from my I747
Click to expand...
Click to collapse
find a cwm flashable zip of a stock rom. it doesn't need to be a current version. flash that. then find the cwm flashable ota zips and flash those. you've retained root, and cwm. i have done this process as well.
i'd link you to the threads you need but i'm on my phone and it's difficult to find this way.
edit: one of the otas is here. i haven't found anything about updating to jelly bean, though. i know there's a tutorial somewhere about making cwm flashable zips, i might try making one for you after i get my sister to sleep.
sent from my I747
go to this link:
http://forum.xda-developers.com/showpost.php?p=28019751&postcount=1
find the appropriate version for your carrier and flash via your recovery. its pre-rooted and cwm/twrp flashable, no odin or PC needed.
Russ77 said:
go to this link:
http://forum.xda-developers.com/showpost.php?p=28019751&postcount=1
find the appropriate version for your carrier and flash via your recovery. its pre-rooted and cwm/twrp flashable, no odin or PC needed.
Click to expand...
Click to collapse
i don't see anything about cwm, only odin?
op, here is a full stock rom. here is the ota that comes after.
sent from my I747
When you're back to rooted TW, flash the recovery you want with Mobile ODIN.
Sent from my SGH-I747M
cehf said:
i don't see anything about cwm, only odin?
op, here is a full stock rom. here is the ota that comes after.
sent from my I747
Click to expand...
Click to collapse
my mistake. OP, grab mobile-odin and do that since you're already rooted
Looking for a safe root method without having to use CWM Recovery. I want to be able to keep stock recovery and be rooted just in case we get 4.2.2 anytime soon.
Azzair113 said:
Looking for a safe root method without having to use CWM Recovery. I want to be able to keep stock recovery and be rooted just in case we get 4.2.2 anytime soon.
Click to expand...
Click to collapse
Not possible, but you can flash stock recovery back after you've rooted successfully, you can find the root procedure and the stock recovery in the faq which can be found in my Sig. Also, when/if 4.2.2 dies come out, I can guarantee that a stock rooted build will be available before most get the actual ota anyways and you'll need a custom recovery for that, so just root and if the update comes out, flash the stock rooted build with cwm or twrp...
Sent from my ANTHRAX sniffing GS3
flastnoles11 said:
Not possible, but you can flash stock recovery back after you've rooted successfully, you can find the root procedure and the stock recovery in the faq which can be found in my Sig. Also, when/if 4.2.2 dies come out, I can giant that a stock rooted build wool be available before most get the actual ota anyways and you'll need a custom recovery for that, so just root and if the update comes out, flash the stock rooted build with cwm or twrp...
Sent from my ANTHRAX sniffing GS3
Click to expand...
Click to collapse
ok thanks will do...
flastnoles11 said:
Not possible, but you can flash stock recovery back after you've rooted successfully, you can find the root procedure and the stock recovery in the faq which can be found in my Sig. Also, when/if 4.2.2 dies come out, I can giant that a stock rooted build wool be available before most get the actual ota anyways and you'll need a custom recovery for that, so just root and if the update comes out, flash the stock rooted build with cwm or twrp...
Sent from my ANTHRAX sniffing GS3
Click to expand...
Click to collapse
If I flash the stock recovery in the cwmr will i need to factory reset or anything before i boot back up.
Azzair113 said:
If I flash the stock recovery in the cwmr will i need to factory reset or anything before i boot back up.
Click to expand...
Click to collapse
Nope
CNexus said:
Nope
Click to expand...
Click to collapse
Thanks for the help doing it right now...
Hello, I am currently rooted and have CWM 6.0.4.3. installed. I'm on CM11 but want to go back to stock.. Is there an easy way to keep root and go back to stock. Want stock for a few functions that ROMS dont seem to be offering but can keep root and CWM ??
Thanks.
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
DeathNotice said:
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
Click to expand...
Click to collapse
Ok perfect, thats what I was looking for. Phone btw is S3 - d2att - SGH i747) Sounds good to install the stock rom and re-root.. I'm sure its here but I have searched everywhere to find a tutorial on this and I cannot find a straight answer.
Would you mind giving me the steps or pointing me to a thread that explains how to and has the files in need to download ?
audit13 said:
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Click to expand...
Click to collapse
Do you know if there is a step by step on this somewhere ? I dont mind going back to complete stock.. I can just re-root and flash CWM after.
OR
Maybe you could just answer the bigger question : the reason I want to go back to stock is I need to use MHL/HDMI which CM11 doesnt support. I dont want to go back to stock, I would rather even go to another ROM that supports mhl/hdmi.. but if I have to go to stock, than so be it.?
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
audit13 said:
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
Click to expand...
Click to collapse
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
robberrobbie said:
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
Click to expand...
Click to collapse
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
robberrobbie said:
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
Click to expand...
Click to collapse
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
audit13 said:
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
Ok thanks, I will do that. 1 thing I'm not quite sure of is the bootloader situation ? In the first tutorial there is a note : Flashing a prior bootloader can hard/soft brick your device. How do I know ?
I see the steps as:
Extract tar file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the tar file
Leave Auto Reboot and F. Reset Time checked.
click start and when done let phone reboot.
If you just want a stock, rooted phone with no custom recovery, no plans to flash custom roms, etc. then you can stop HERE.
For my situation, is it just that easy ?
Before flashing, verify the version of your bootloader.
audit13 said:
Before flashing, verify the version of your bootloader.
Click to expand...
Click to collapse
OK I have made an effort to go read and figure out how to find out what version of bootloader on my own.. But i cannot find ? Any chance you know... And could help?
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Hey. I got the i747m. As for what was the last stock ROM I had, can't say. I know when I bought the phone it was ICS and I had received and update to jellybean.. But them went to cm10. The tutorial I followed told me had me back everything up, which I did. Have it in a file somewhere on my comp, would that tell me ?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Ariesdroid said:
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not seen a stock mf1 ROM that can be flashed in CWM. You could use mobile Odin to flash back to stock and then flash Philz Touch via desktop Odin later.
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
audit13 said:
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Click to expand...
Click to collapse
Hey there Audit, Sorry to bother you again, I just dont know how to move forward from here and neeeeeed some help.
I have been reading for days and days have not found a straight answer for my issue and I dont want to just go ahead and start flashing when I dont know if its the right method ?
I dont know how to get back to stock from where I'm at, I dont know how to figure out what bootloader I have (you asked me)
I have found a couple links on XDA that I can follow, I'm just not sure if they apply to my situation ?
This is a pretty detailed response/tutorial, but I dont know if I can just go ahead with this or not ?
http://forum.xda-developers.com/showthread.php?t=2186967
This is also very detailed: http://forum.xda-developers.com/showthread.php?t=1739426
Any help would be greatly appreciated !
robberrobbie said:
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
Click to expand...
Click to collapse
If you are sure you have the Rogers i747m and you have never loaded a stock Rogers 4.3 ROM onto your phone, you could use desktop Odin to flash a pre-rooted 4.1.2 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
Flashing the pre-rooted 4.1.2 ROM will return the phone to completely stock, wipe out all installed apps and data, and you will have root. I do not recommend flashing the Rogers 4.3 pre-rooted ROM from the link.
Once you are able to boot into the phone and set things up, you can flash Philz Touch from Odin which will give you a custom recovery on a rooted stock 4.1.2 ROM.
So, I'm not a complete noob to flashing roms/rooting devices. I flashed cm 11 to my s3, and decided I wanted to go back to stock via Odin. For some reason when I tried to turn on my device it was still showing the cm 11 splash screen and wouldn't proceed any further. It isn't technically bricked. I guess this would be classified as a boot loop to the nth degree. I tired to boot in recovery mode and wipe the cache partition and all user data to the same cm 11 robot taunting me. When I tried the process (flashing stock vi Odin) again to possibly fix whatever might have been a miss, I got the error message on the download screen "secure check fail: sb12." On the download mode screen it also says I am running the official system rom. I don't know what steps I need to take from here to get my phone to actually boot via the stock rom. Has anybody else had this issue or similar? Any help in resolving this would be greatly appreciated.
Is your phone a i747? If you are you running a stock 4.3 bootloader on your i747, you can't use Odin to flash back to stock unless the ROM was specifically designed to be flashed in Odin.
What is shown on the screen in download mode?
audit13 said:
Is your phone a i747? If you are you running a stock 4.3 bootloader on your i747, you can't use Odin to flash back to stock unless the ROM was specifically designed to be flashed in Odin.
What is shown on the screen in download mode?
Click to expand...
Click to collapse
I was under the impression the rom I was attempting to flash was indeed intended for Odin. It is the SGH-I747.
The download screen states,
Product Name: SGH-I747
Custom Binary: Custom
System Status: Official
Qualcom Secure Boot: Enable
Warranty Bit: 1
Bootloader AP SWERV: 2
Here is an added bit of fun, in the midst of the process I accidentally checked "Nand erase all," in Odin at one point.
Based on the information provided, your phone is running a stock ATT 4.3 bootloader. The CM11 splash screen is still showing up because the flash did not actually happen. You're lucky your phone was not bricked in the process of using Odin. I recommend not using Odin to flash a ROM that tries to alter the bootloader.
I recommend flashing a custom recovery such as Philz Touch in Odin and flashing a different KK ROM such as Valudis.
If you want to get back to stock, try this: http://forum.xda-developers.com/showthread.php?t=2658486
audit13 said:
Based on the information provided, your phone is running a stock ATT 4.3 bootloader. The CM11 splash screen is still showing up because the flash did not actually happen. You're lucky your phone was not bricked in the process of using Odin. I recommend not using Odin to flash a ROM that tries to alter the bootloader.
I recommend flashing a custom recovery such as Philz Touch in Odin and flashing a different KK ROM such as Valudis.
If you want to get back to stock, try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
My next question would be how can I move the zip files I download to the internal storage of my phone to flash them through Philz Touch?
Have you tried using kies?
http://forum.xda-developers.com/showthread.php?t=2088809
sjthuss said:
Have you tried using kies?
http://forum.xda-developers.com/showthread.php?t=2088809
Click to expand...
Click to collapse
I did. It said the the device couldn't be updated, or something to that effect.
Kies will not work without a stock recovery or a rooted phone from my experience.
I would be surprised if kies can restore your phone as ATT never released a full 4.3 stock ROM. ATT only made 4.3 available via an OTA update.
audit13 said:
Kies will not work without a stock recovery or a rooted phone from my experience.
I would be surprised if kies can restore your phone as ATT never released a full 4.3 stock ROM. ATT only made 4.3 available via an OTA update.
Click to expand...
Click to collapse
I don't know about AT&T, but I'm on Telus in Canada and I used kies to revert back to stock 4.3 with CWM recovery and phone rooted, and it worked no problem.
audit13 said:
Based on the information provided, your phone is running a stock ATT 4.3 bootloader. The CM11 splash screen is still showing up because the flash did not actually happen. You're lucky your phone was not bricked in the process of using Odin. I recommend not using Odin to flash a ROM that tries to alter the bootloader.
I recommend flashing a custom recovery such as Philz Touch in Odin and flashing a different KK ROM such as Valudis.
If you want to get back to stock, try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
So, I know there is a "thanks," button but I feel like that would be a little too informal for how much I appreciate your help! I downloaded ADB to move the rom (I went with AOKP because it was the first one that worked) to my phone, flashed it using TWRP and...BAM! We are back in business. Thanks for the direction, I thought I had a nice, new, shiny brick on my hands for about two days.
sjthuss said:
I don't know about AT&T, but I'm on Telus in Canada and I used kies to revert back to stock 4.3 with CWM recovery and phone rooted, and it worked no problem.
Click to expand...
Click to collapse
Canadian carriers use the i747m while att users get the i747.
The Canadian carriers did release a full 4.3 ROM unlike att who did not.
Hey everyone. I'm having some troubles with every custom ROM I install on my S3 T-Mobile (d2tmo) so I want to come back to Stock ROM. I've been watching some tutorials, but lot of them are pretty old, and none is for the Galaxy S3.
So, what do I need to do to go back to Stock ROM?
Should I do a full wipe from recovery (TWRP) and then flash stock ROM via Odin?
The custom ROM I flashed is 6.0.1. The phone had 4.3 when I flashed the custom ROM.
Am I right about what I think I should do?
Thanks in advance. :good:
Yep. The firmware you'll use in Odin should be a .tar.md5 file.
Just flash the latest stock rom from sammobile.com using Odin. No need to do anything before flashing the stock ROM.
After flashing the stock ROM, immediately boot into recovery and perform a factory wipe.
audit13 said:
Just flash the latest stock rom from sammobile.com using Odin. No need to do anything before flashing the stock ROM.
After flashing the stock ROM, immediately boot into recovery and perform a factory wipe.
Click to expand...
Click to collapse
tonytien said:
Yep. The firmware you'll use in Odin should be a .tar.md5 file.
Click to expand...
Click to collapse
Thank you very much for answering my questions guys! Everything turned out ok!
But I have a doubt about a little think that I hope you could help me.
Before flashing the stock rom I was planning on backing up my efs folder from the TWRP,version 2.8.70 for my s3 (d2tmo), but when I try to do a backup, there no "EFS Folder" option, however, on my other phone, a Galaxy Note 3 Exynos Variant (International Version) when I try to perform a backup there is a EFS folder option for backing up. It is also a TWRP recovery, and same version. 2.8.7.0. I know the phones are completely different, but, why if I'm using the same custom recovery and same version I can't do a EFS Folder backup from the backup option?
I hope I made myself clear about my question. Sorry for my English BTW, it is not my first language.
Thanks in advance!
Maybe this will help although it requires root: http://forum.xda-developers.com/s6-edge-plus/development/updating-t3210266