Related
So I was about to root my Xperia S and started reading a guide, it said that I would need to load some files into the phone using fastboot. After a while I figured out how to fastboot and managed to get the popup on my computer once, however, I didn't install it that time and now when I try to fastboot again I get the blue LED on my phone, my computer makes some noises indicating that something unusual have been conected, nothing happens and the phone shows the Sony logo.
Does anybody know how to fix the problem and get the popup on the computer to re apear.
I run a 64 bit windows 7 home premium.
Thanks.
HugoNikanor said:
So I was about to root my Xperia S and started reading a guide, it said that I would need to load some files into the phone using fastboot. After a while I figured out how to fastboot and managed to get the popup on my computer once, however, I didn't install it that time and now when I try to fastboot again I get the blue LED on my phone, my computer makes some noises indicating that something unusual have been conected, nothing happens and the phone shows the Sony logo.
Does anybody know how to fix the problem and get the popup on the computer to re apear.
I run a 64 bit windows 7 home premium.
Thanks.
Click to expand...
Click to collapse
Hi HugNikanor..
When I Unlocked The Bootloader and Was Going To Start Root Process.. I had The Same Problem..
If I remember Correctly It Was a Driver Issue..
In FlashTool Folder There Is Another Folder Called Drivers.. Have U Tried Installing The Fastboot Drivers From There..?
ahmedyar91 said:
Hi HugNikanor..
When I Unlocked The Bootloader and Was Going To Start Root Process.. I had The Same Problem..
If I remember Correctly It Was a Driver Issue..
In FlashTool Folder There Is Another Folder Called Drivers.. Have U Tried Installing The Fastboot Drivers From There..?
Click to expand...
Click to collapse
I don't have anything from flashTool. The guide I used is this: AddictiveTips . com and searched for Root xperia S (it's the one that doesn't say gingerbread.) if that can help in any way.
HugoNikanor said:
I don't have anything from flashTool. The guide I used is this: AddictiveTips . com and searched for Root xperia S (it's the one that doesn't say gingerbread.) if that can help in any way.
Click to expand...
Click to collapse
Ok.. You Are Trying To Root Using Fastboot Mode..
I Assume You Have Already Unlocked The Bootloader.. Which Firmware Version You Are Using.. Is It Sony ICS 6.1.A.0.452..?
ahmedyar91 said:
Ok.. You Are Trying To Root Using Fastboot Mode..
I Assume You Have Already Unlocked The Bootloader.. Which Firmware Version You Are Using.. Is It Sony ICS 6.1.A.0.452..?
Click to expand...
Click to collapse
If I wasn't clear enough In my previus post, I am curently trying to unlock bootloder, to later be able to root the device.
The version of the firmware I am using is 6.A.0.452 running android 4.0.4.
HugoNikanor said:
If I wasn't clear enough In my previus post, I am curently trying to unlock bootloder, to later be able to root the device.
The version of the firmware I am using is 6.A.0.452 running android 4.0.4.
Click to expand...
Click to collapse
So for Unlocking Bootloader You have to use fastboot mode.. ok
and after that, for rooting it should be done using flashtool in fastboot mode..
so here is the thing.. Download The Flashtool first And After extracting the files You'll Find a Folder Named Drivers.. first Install The Fastboot Drivers Even To Unlock The Bootloader..
ahmedyar91 said:
So for Unlocking Bootloader You have to use fastboot mode.. ok
and after that, for rooting it should be done using flashtool in fastboot mode..
so here is the thing.. Download The Flashtool first And After extracting the files You'll Find a Folder Named Drivers.. first Install The Fastboot Drivers Even To Unlock The Bootloader..
Click to expand...
Click to collapse
That might help me get somewhere, I am going to bed now but I will definitly try that method tomorow. Thanks.
HugoNikanor said:
That might help me get somewhere, I am going to bed now but I will definitly try that method tomorow. Thanks.
Click to expand...
Click to collapse
No problem..And I Hope It'll Work... And Post Back After Trying That Stuff...
ahmedyar91 said:
No problem..And I Hope It'll Work... And Post Back After Trying That Stuff...
Click to expand...
Click to collapse
Got that part working now, now just to fix to problem with the phone going out of fastboot mode way to fast. But I think I have seen a guide for that somewhere else.
I will report back after future succes or failures with the project.
Got bootloader unlocked!
Thanks alot for the help with Flashtools. All the guides I found just asumed that you just knew a lot of things which kinda complicated it for me.
Again, Thanks!
HugoNikanor said:
Got bootloader unlocked!
Thanks alot for the help with Flashtools. All the guides I found just asumed that you just knew a lot of things which kinda complicated it for me.
Again, Thanks!
Click to expand...
Click to collapse
No Problem My Friend.. I am Glad I Helped You..!!!
neither fastboot nor flashmode!!!!!
Hi,
I can't connect my phone in flashmode nor in fastboot mode. Whenever i connect it in flashmode/fastboot mode my PC stucks(hangs) and i have to restart it again i have installed all the drivers for all devices but still the problem exists. Any help in this regards???
Also to mention i'm using Windows XP SP3 and flashtool version is 0.9.1.0.
I have also one more issue when i connect my phone to the charger when it is switched off the phone does not charge at all it simply shows me the sony logo and keeps showing it again and again but never charges. In short when my battery is complete i cannot get it back to life due to this problem but thank god that i have installed CWM on my phone.
Thanks for helping i'll also post this in the development section also.
I have no idea to your problem, but I would guess that it have something to do with you using xp, or maybe some damage on your phone.
Sent from my LT26i using xda app-developers app
shoz_on4u said:
Hi,
I can't connect my phone in flashmode nor in fastboot mode. Whenever i connect it in flashmode/fastboot mode my PC stucks(hangs) and i have to restart it again i have installed all the drivers for all devices but still the problem exists. Any help in this regards???
Also to mention i'm using Windows XP SP3 and flashtool version is 0.9.1.0.
I have also one more issue when i connect my phone to the charger when it is switched off the phone does not charge at all it simply shows me the sony logo and keeps showing it again and again but never charges. In short when my battery is complete i cannot get it back to life due to this problem but thank god that i have installed CWM on my phone.
Thanks for helping i'll also post this in the development section also.
Click to expand...
Click to collapse
I had the same problem, try disabling your firewall and disable the security installed in your pc when you try this..
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
ahmedyar91 said:
Hi HugNikanor..
When I Unlocked The Bootloader and Was Going To Start Root Process.. I had The Same Problem..
If I remember Correctly It Was a Driver Issue..
In FlashTool Folder There Is Another Folder Called Drivers.. Have U Tried Installing The Fastboot Drivers From There..?
Click to expand...
Click to collapse
should I unlock the boot loader to flash via fastboot?
banguncool said:
should I unlock the boot loader to flash via fastboot?
Click to expand...
Click to collapse
Yes ! You must have an unlock bootloader to flash (kernel, system, userdata)
via fastboot or via flashtool :laugh:
Hello I have an Xperia S, with bootloader locked and recently installed a ROOM in order to get the 6.A.1.2.55 with root.
Installed from a ZIP from recovery mode following this post:
http://forum.xda-developers.com/show....php?t=2009672
Now when I try to do step 7 (flash kernel and Baseband) Using Flashtool, Im unable to enter to the mode; when the windows prompts me, I turn off the phone, press and hold Vol up connect the USB but nothing happens, only the Sony Logo and then the icon of charging battery, I also tried to turn off the phone while holding Power button + Vol up (at the same time) and get the 3 vibrations, but the same result when I connect, the logo and the charging animations/icon..( no LED of any color or anything)
Im using the latest Flashtool version (0.9.9.0) with the drivers intalled (even though Windows security constantly pestered me about not being able to identify the source and signture) on Windows 7 64 bits..
Thank you..
sordatos said:
Hello I have an Xperia S, with bootloader locked and recently installed a ROOM in order to get the 6.A.1.2.55 with root.
Installed from a ZIP from recovery mode following this post:
http://forum.xda-developers.com/show....php?t=2009672
Now when I try to do step 7 (flash kernel and Baseband) Using Flashtool, Im unable to enter to the mode; when the windows prompts me, I turn off the phone, press and hold Vol up connect the USB but nothing happens, only the Sony Logo and then the icon of charging battery, I also tried to turn off the phone while holding Power button + Vol up (at the same time) and get the 3 vibrations, but the same result when I connect, the logo and the charging animations/icon..( no LED of any color or anything)
Im using the latest Flashtool version (0.9.9.0) with the drivers intalled (even though Windows security constantly pestered me about not being able to identify the source and signture) on Windows 7 64 bits..
Thank you..
Click to expand...
Click to collapse
Dude for bootloader locked u have to press volume down button & connect usb.
Its flashmode not fastboot mode
Press Thanks
Sent from my LT26i using xda premium
I do that. I've flashed it before that why I don't understand (i meant volume down)
But maybe I did something wrong.
Thanks.
Sent from my LT26i using xda app-developers app
HugoNikanor said:
Got bootloader unlocked!
Thanks alot for the help with Flashtools. All the guides I found just asumed that you just knew a lot of things which kinda complicated it for me.
Again, Thanks!
Click to expand...
Click to collapse
hi, i have the same problem my phone goes away from fastboot state very soon! i cant do anything using fastboot.exe.
(Xperia acro s) blue led turned on and after a few seconds sony trade mark shown!
Hey guys! i have succes with my device!i finnaly rooted it.But now I want to change the look of it. I want To change everything! Can someone help me to Customize?
Help!!!!!
kynkyracer said:
Hey guys! i have succes with my device!i finnaly rooted it.But now I want to change the look of it. I want To change everything! Can someone help me to Customize?
Click to expand...
Click to collapse
Hey Dude can you tell me .....
How you rooted your Y200....
Please I have tried several ways but all go vain...
I have got ascend y210d .....
please help....
macjenn said:
Hey Dude can you tell me .....
How you rooted your Y200....
Please I have tried several ways but all go vain...
I have got ascend y210d .....
please help....
Click to expand...
Click to collapse
Just follow this steps:
Download software https://www.dropbox.com/s/arvz18cvs8g0kjl/Y200ToolBox.exe
enable USB debugging and disable fast reboot
use windows 7, in XP don't work the soft
turn off the phone, remove the battery a few seconds and turn, do FlashBoot mode ( Volume down + Power the same time for 10 seconds).
Connect your phone to your PC and run the software
Click in die Adb Drivers installer...
click in ich akzeptiere........
Click in Root + CMW (This option is enabled when the drivers are properly installed)
the software will work, you get a black box dialog.say finished and restart the cel.
Don't touch.... the software still running, and the celphone must restart for the second time... after that .... Now if you can disconnect
Already a User Root
for the version U8655-51 Latinoamerica DONT FLASH Kernel...for the europe version U8655-1... you can do it.,.!!
Bro, Its the heartiest thanks from me...
that u provided the solution to one of my biggest search...
Right now I have got installed Xp, so I have to change it first...
and then reply you about the rooting..
i tried using the y200 toolbox on my y210d but sadly it did not work. Hope something comes out soon, suck's to use a unrooted phone.
successfully rooted from kenya
hi guys. i carefully followed this guide and now am rooted..
thanks guyz... need more tools for my y200...
proud to join xda
Huawei y200
it didnt work for my acsend Y200 on first but i found a solution !!! when you doing flash boot dont let it go to boot menu !!! hold volume up + power,when you see screen like 3 (mobile) or other providers screen release volume + and press volume - together with the power and hold it for about 10 sec until your providers screen frozes and then connect to PC . GOOD LUCK
Huawei Y200 T (T8620)
hey guys.. might be off topic. but i would like to know hoe to get into fastboot/download mode fo my huawei t8620. I tried every key combination and i could only get into Stock recovery (Android System Recovery). Help me guys.. and thank you
hii everybody
somebody help sorry on my bad english
how to speed up huawei ascend y200 for better gaming performance
or ani performance or some compatibile rom for that device
im using infusion rom
y need somethink faster
pls. help meeeeeee
after first reboot it sais "error: device not found"....
IS there any Custom ROM for Ascend Y200? please provide a link for that. I'm unable to find it anywhere.
kynkyracer said:
Just follow this steps:
Download software https://www.dropbox.com/s/arvz18cvs8g0kjl/Y200ToolBox.exe
enable USB debugging and disable fast reboot
use windows 7, in XP don't work the soft
,.!!
Click to expand...
Click to collapse
Is there any Stable Custom ROM for Ascend Y200? Provide the link. I searched a lot but i not able to find any.
Thanks
Hallo everybody,
I have a question for you, I have a Zuk Z2 (not the pro version) I received this morning the notification for the update to ZUI 2.0.069 and, since I have unlocked bootloader and root, the official update failed, so I downloaded the update .zip file and I installed it from the recovery (TWRP).
The installation went fine but then after the reboot the phone is not turning on anymore.
I guess the phone is not completely off because the white LED is on but when I try to turn it on nothing happen, and if I press the power button for long time I see a black screen with the ZUK logo in the middle but only for a second and then the screen return black.
Also the device is not recognized by the computer.
Do you have any idea what went rong? do you know how to fiy it?
Thank you very much!
VMat21 said:
Hallo everybody,
I have a question for you, I have a Zuk Z2 (not the pro version) I received this morning the notification for the update to ZUI 2.0.069 and, since I have unlocked bootloader and root, the official update failed, so I downloaded the update .zip file and I installed it from the recovery (TWRP).
The installation went fine but then after the reboot the phone is not turning on anymore.
I guess the phone is not completely off because the white LED is on but when I try to turn it on nothing happen, and if I press the power button for long time I see a black screen with the ZUK logo in the middle but only for a second and then the screen return black.
Also the device is not recognized by the computer.
Do you have any idea what went rong? do you know how to fiy it?
Thank you very much!
Click to expand...
Click to collapse
You've bricked your phone, you can recover it with qpst tool. For instructions head over to zukfans.eu
Thank you for your answer.
Yes I was able to recover my phone thanks to the help of zukfans.eu guys, but not with qpst tool, now everything works properly.
Teo21 said:
but not with qpst tool
Click to expand...
Click to collapse
What did you used then? can you help us with the procces? If I ever brick my phone it would be a great help
PHRuiz said:
What did you used then? can you help us with the procces? If I ever brick my phone it would be a great help
Click to expand...
Click to collapse
So basically what I did was enter in fastboot mode and from there, using adb comand, I unlocked again the bootloader (I already ulnocked it before but the last update locked it again) and then I was able to reboot the phone succesfully.
During the soft brick of my device I was able to enter the recovery (pressing volume up + volume down + power button for almost two minutes) but in the recovery I was not able to wipe and flash a new room, so what really helped me was a tip from a guy in the zukfans.eu forum for enter fastboot directly using the phone buttons.
To do that you have first to completely turn off your phone (from the recovery for example) and then you have to press the buttons volume up and volume down at the same time and NOT the power button, at this point you connect the usb cable from the computer and your phone will enter fastboot mode.
Once in fastboot mode you can use adb comands for recover your phone.
I hope my explanation was clear and if you need I can send you the link to the dicussion at zukfans.eu.
VMat21 said:
So basically what I did was enter in fastboot mode and from there, using adb comand, I unlocked again the bootloader (I already ulnocked it before but the last update locked it again) and then I was able to reboot the phone succesfully.
During the soft brick of my device I was able to enter the recovery (pressing volume up + volume down + power button for almost two minutes) but in the recovery I was not able to wipe and flash a new room, so what really helped me was a tip from a guy in the zukfans.eu forum for enter fastboot directly using the phone buttons.
To do that you have first to completely turn off your phone (from the recovery for example) and then you have to press the buttons volume up and volume down at the same time and NOT the power button, at this point you connect the usb cable from the computer and your phone will enter fastboot mode.
Once in fastboot mode you can use adb comands for recover your phone.
I hope my explanation was clear and if you need I can send you the link to the dicussion at zukfans.eu.
Click to expand...
Click to collapse
If you can post the link of the dicussion at zukfans.eu can be very usefull thank you
Verolive said:
If you can post the link of the dicussion at zukfans.eu can be very usefull thank you
Click to expand...
Click to collapse
Sure, no problem, here is the link to the discussion:
http://zukfans.eu/community/threads/zui-2-0-069-released.87/page-3
I hope it will be helpful!
I bought the Zuk z2 (no Pro) on zukmobile.cc, i dont have received it yet, but they sent me this email:
Dear Customer, Sorry for disturbing you. We just got the latest news from factory that as the bug of the current OS, please do not update your firmware when you received the OS Update Remainder. We will release a formal update later, please kindly noticed. Any question, please contact us. Have a nice day! Lenovo ZUK Mobile
Hope i had helped =)
VMat21 said:
Sure, no problem, here is the link to the discussion:
http://zukfans.eu/community/threads/zui-2-0-069-released.87/page-3
I hope it will be helpful!
Click to expand...
Click to collapse
Hi...if you still have the update.zip, could you please updload it somewere? Do you know where to find rom in zip format for recovery?
i have the same problem with my phone i bricked it obviously and now no fastboot or edl mode or anything...... any ideas?
Slorks said:
i have the same problem with my phone i bricked it obviously and now no fastboot or edl mode or anything...... any ideas?
Click to expand...
Click to collapse
It will go to edl
Doesnt zuk logo comes or not
There is a buttom combinatoin to take it to edl mode
visit zukfans.eu for more info
can you help me to get into the fastboot mode using adb comand?
can you help me to get into the fastboot mode using adb comand?
VMat21 said:
So basically what I did was enter in fastboot mode and from there, using adb comand, I unlocked again the bootloader (I already ulnocked it before but the last update locked it again) and then I was able to reboot the phone succesfully.
During the soft brick of my device I was able to enter the recovery (pressing volume up + volume down + power button for almost two minutes) but in the recovery I was not able to wipe and flash a new room, so what really helped me was a tip from a guy in the zukfans.eu forum for enter fastboot directly using the phone buttons.
To do that you have first to completely turn off your phone (from the recovery for example) and then you have to press the buttons volume up and volume down at the same time and NOT the power button, at this point you connect the usb cable from the computer and your phone will enter fastboot mode.
Once in fastboot mode you can use adb comands for recover your phone.
I hope my explanation was clear and if you need I can send you the link to the dicussion at zukfans.eu.
Click to expand...
Click to collapse
To start your device in edl mode. Just press ans hold volume down button, then connect your usb cable.
Install qualcomm drivers and flash wigh qfil or xiaomi miflash tool.
Sent from my ZUK Z2121 using Tapatalk
I recently bought zuk 2 mobile and facing issue from the very first day.once screen locked after some time led notification light turns on ,further phone doesn't respond either through power button or through finger scanner and required to force reboot phone. I requested for replacement phone but my bad ,even new replaced phone also showing same issue.
Is that manufacturing issue since replaced phone also shows same issue.
Ronish said:
I recently bought zuk 2 mobile and facing issue from the very first day.once screen locked after some time led notification light turns on ,further phone doesn't respond either through power button or through finger scanner and required to force reboot phone. I requested for replacement phone but my bad ,even new replaced phone also showing same issue.
Is that manufacturing issue since replaced phone also shows same issue.
Click to expand...
Click to collapse
If you have i modded international rom, that might cause your problems. Use official zuk rom, if you want international flash cm13 or another one.
Sent from my ZUK Z2121 using Tapatalk
bricked zuk z2
hey guys and girls
I have a problem with Zuk Z2
The problem is that when the flash-in phone automatically disconnected and I have uploaded all the files you need.
The phone starts but before my eyes:
MAIN MENU:
-reboot
-install update package
-poweroff
When you select "install the update package," the message "system will now install update.zip root directory of the system partition in first ..."
Please help Someone may have a similar case? I know, I'm green: /
cukierunio/candyman said:
hey guys and girls
I have a problem with Zuk Z2
The problem is that when the flash-in phone automatically disconnected and I have uploaded all the files you need.
The phone starts but before my eyes:
MAIN MENU:
-reboot
-install update package
-poweroff
When you select "install the update package," the message "system will now install update.zip root directory of the system partition in first ..."
Please help Someone may have a similar case? I know, I'm green: /
Click to expand...
Click to collapse
I do not understand what you meant when you say " The problem is that ......... file you need"
It appears that when you boot your phone went to stock recovery mode instead of normal mode. If you can not boot it to normal you might need to flash the firmware.
Unroot
How to unroot Lenovo Z2 plus
Hi I had (in fact I still have) one zuk z2 plus 2131, bought by gearbest.
Stock rom installed, unloock bootloader, install TWRP ...
was fine, then I did something in engineering mode,
He went bootloop.
I tried to reinstall everything from TWRP, nothing to do ....
I tried then with QFIL (but I had not read that I need to lock the bootloader)
and it did not ...
I did it again bootloader block and reinstalled both QFIL that with MIFLASH but continues bootloop, can someone help me ....
I still can get into 9008 I would not even play me this opportunity
!^@R said:
How to unroot Lenovo Z2 plus
Click to expand...
Click to collapse
https://zukfans.eu/community/threads/zuk-z2-bootloader-unlock.62/
i installed cm14.1 today from the cyanogenmod website i had everything running fine until i reboot into recovery. i got a black screen and it didnt bot into recovery at all so i held my power button and volume down and nothing happens. i cant even boot up into fast boot or anything. nothing is turning my phone on. when i connect it to my pc nothing happens. is there anything i can do?
There's a mega unbrick guide for the OnePlus 3, use that then install the correct firmware and install the custom TWRP and re flash the ROM
i tried that method but the device doesnt even show up on my pc
envious86 said:
i tried that method but the device doesnt even show up on my pc
Click to expand...
Click to collapse
Get this sorted yet? You'll need a modified TWRP recovery for the newest CM based builds. I went through the same thing yesterday or the day before. Try holding volume down and power for like 30 seconds until you feel it vibrate that it is rebooting. Then hold volume *UP* while it reboots or if you see the "your device is not safe..." flash screen hurry and press volume down and go into fastboot. From there you can fastboot flash a new recovery.
I had the same problem as well, in device manager go to ports (com & LPT) and it will show up there under qualcum device. Don't forget to go and turn off certificate verification
Thanks guys I'll try this after work. Hopefully it works. If not sure oneplus are hopefully releasing a new phone soon
No it didn't work. I have a feeling I deleted something I shouldn't have because I was clearing out my files before I restarted and that was that.
you gotta use special twrp recovery for cm14.1...
https://www.androidfilehost.com/?fid=385035244224394867
Just use the recovery rahditzz provided you with a link, if your phone is stuck on black screen with white led hold your power button until it turns off, then boot to fastboot and flash the recovery and you will boot...
rahditzz said:
you gotta use special twrp recovery for cm14.1...
https://www.androidfilehost.com/?fid=385035244224394867
Click to expand...
Click to collapse
thanks didnt work. when i fastboot flash recovery and boot again it just goes into a black screen again
Then use unbrick method 2..
rahditzz said:
Then use unbrick method 2..
Click to expand...
Click to collapse
neither method works. all i can do is get into fastboot mode thats it. it wont show up on my pc at all
Method 2 workshop 100%, unless its a hardware fault..
Are you pushing volume up while plugging in cable?
I am. To be honest its very complex too me. I'm new to android and all this is so hard. I follow steps but I'm not 100% sure what I doing. Also my computer isn't great. Do these methods work on vista? Is there a video tutorial or anything? Sorry for annoying you and you don't understand how thankful i am for your help.
I jeep getting the sahara communication failed error
envious86 said:
I am. To be honest its very complex too me. I'm new to android and all this is so hard. I follow steps but I'm not 100% sure what I doing. Also my computer isn't great. Do these methods work on vista? Is there a video tutorial or anything? Sorry for annoying you and you don't understand how thankful i am for your help.
Click to expand...
Click to collapse
Your running vista???? Good god update your OS!!
Maybe your fastboot drivers got updated? There were some reports around this. You could try reinstalling the drivers and following the unbrick guide without an internet connection.
Sent from my ONEPLUS A3003 using Tapatalk
Cool u can boot into Fastboot, what error do you get when you type Fastboot devices? Nothing shows up?
Hi,
My phone got a message about a virus which I assumed was a devious add, it wouldn't go away so I rebooted. It has gone into Mi-Recovery 3.0 and I cant get out. I've tried to connect to PC suite but it won't connect to my laptop
without debugging, which I can't do. I've wiped data but no good. Any ideas?
Flash full rom img via EDL mode and MiFlash software. Check out the official forums how to do it all.
For me the command fastboot oem edl works to get into edl mode.
pr0x2 said:
Flash full rom img via EDL mode and MiFlash software. Check out the official forums how to do it all.
For me the command fastboot oem edl works to get into edl mode.
Click to expand...
Click to collapse
Thank you for answering. I have downloaded a full rom and the MiFlash software. I have made an EDL cable but nothing happens. From what I read it says turn the phone off and connect the modified cable and it will enter EDL mode however it just stays on the Mi-Recovery 3.0 page. I've tried the command line you suggest but that can't find the phone. I've also tried the test point method and still can't get into edl mode. What am I doing wrong?
Sorry, I'm new to this so don't really know what I'm doing. Would you be able to give me some easy to follow advise or some links please.
Multi57 said:
Thank you for answering. I have downloaded a full rom and the MiFlash software. I have made an EDL cable but nothing happens. From what I read it says turn the phone off and connect the modified cable and it will enter EDL mode however it just stays on the Mi-Recovery 3.0 page. I've tried the command line you suggest but that can't find the phone. I've also tried the test point method and still can't get into edl mode. What am I doing wrong?
Sorry, I'm new to this so don't really know what I'm doing. Would you be able to give me some easy to follow advise or some links please.
Click to expand...
Click to collapse
You need your normal USB C cable. When you are in fastboot you need to type "fastboot oem edl" your screen will go to black and you are now in EDL mode. Now flash full img via miflash software.
pr0x2 said:
You need your normal USB C cable. When you are in fastboot you need to type "fastboot oem edl" your screen will go to black and you are now in EDL mode. Now flash full img via miflash software.
Click to expand...
Click to collapse
I cant get to fastboot as I'm stuck in Recovery. My only choices are Reboot to System and Back to Main Menu. When I'm in Main Menu my choices are Reboot, Wipe Data or Connect with MIAssistant.
Multi57 said:
I cant get to fastboot as I'm stuck in Recovery. My only choices are Reboot to System and Back to Main Menu. When I'm in Main Menu my choices are Reboot, Wipe Data or Connect with MIAssistant.
Click to expand...
Click to collapse
When you turn off the phone and press vol down + power what does that do?
It shows the Mi start screen then boots strait into recovery Main Menu. I can't turn the phone off without it rebooting.
Does anyone know how I can get around this? I've run out of things to try.
Did you try reflashing the recovery maybe that fixes it?
Sent from my MI 5s using Tapatalk
Can you explain how I do that? I can't connect to my computer so not sure what you mean. I'm new at this so unsure of the options.
Multi57 said:
Can you explain how I do that? I can't connect to my computer so not sure what you mean. I'm new at this so unsure of the options.
Click to expand...
Click to collapse
Oh hmm never mind. Ignore what I said above. I thought you had TWRP recovery but you've got the stock one.
Sent from my MI 5s using Tapatalk
templeka said:
Oh hmm never mind. Ignore what I said above. I thought you had TWRP recovery but you've got the stock one.
Sent from my MI 5s using Tapatalk
Click to expand...
Click to collapse
Is there no way of getting out of stock recovery?
Maybe your volume rocker buttons are faulty .
Happened with one of my friend his device was only booting into recovery mode on reboot because vol+ button was permanently stuck ?
Try to lift up the button if it is stuck or
press button repeatedly for sometime .
Ashish 289, you are right, it was a faulty volume rocker. Once disconnected it booted. Thanks.
Multi57 said:
Hi,
My phone got a message about a virus which I assumed was a devious add, it wouldn't go away so I rebooted. It has gone into Mi-Recovery 3.0 and I cant get out. I've tried to connect to PC suite but it won't connect to my laptop
without debugging, which I can't do. I've wiped data but no good. Any ideas?
Click to expand...
Click to collapse
now its my turn brother got my mi5 bricked in the same way .
it stays in mi recovery 3.0 always . if you tell me what you did after these steps not working ? could you do anything ?
need a solution man, please help .
thanks in advance.