Develop Bugs

HBOOT Questions

I feel like I ask a lot of these, but for being such a small thing, HBOOT is pretty complex.
So my first question is, in HBOOT, what is the difference between PVT and EVT1? I currently have 2 WFS and both are Marvelc. The HBOOT of the older Marvelc says:
Code:
MARVELC EVT1 SHIP S-ON RL
The other HBOOT says:
Code:
MARVELC PVT SHIP S-ON RL
The HBOOT of the older one is 1.09.0000, the HTCDev HBOOT for unlocking. The HBOOT of the newer phone is 1.10.0001, the bootloader from the newest FOTA update.
Another question I have is can 1.10.0001 be S-OFF'd or am I out of luck with S-OFFing my phone now? I know I can use bltool and superversion and what-not, but I've never had much luck with that.

Hboot questions
Yes, you can S-off Hboot 1.10 but Hboot 1.09 is better in my opinion. When I started flashing Roms with Hboot 1.10 and I would go back to stock my wifi would always show error and no one has figured that out yet. Best way to go back to Hboot 1.09 is to run football's RUU for the Marvelc, once it is running go to the temp folder and copy the ROM.zip wherever you want it. Close everything and then open the ROM.zip and extract the recovery, boot, system to the folder where fastboot is. Make sure you have USB debugging before turning off your phone. Turn off your phone, pull the battery out once it's off and put it back in, hold vol down and power, then highlight fastboot and do the following:
(if you are already rooted make sure you wipe the dalvik-cache before flashing and after flashing a factory reset)
Open Cmd prompt and do the following:
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system.img
You will still have S-off and bootloader will be unlocked as well.
Now flash your custom recovery. Hope that helped out.

kalaker said:
I feel like I ask a lot of these, but for being such a small thing, HBOOT is pretty complex.
So my first question is, in HBOOT, what is the difference between PVT and EVT1? I currently have 2 WFS and both are Marvelc. The HBOOT of the older Marvelc says:
Code:
MARVELC EVT1 SHIP S-ON RL
The other HBOOT says:
Code:
MARVELC PVT SHIP S-ON RL
The HBOOT of the older one is 1.09.0000, the HTCDev HBOOT for unlocking. The HBOOT of the newer phone is 1.10.0001, the bootloader from the newest FOTA update.
Another question I have is can 1.10.0001 be S-OFF'd or am I out of luck with S-OFFing my phone now? I know I can use bltool and superversion and what-not, but I've never had much luck with that.
Click to expand...
Click to collapse
I used the goldcard method to S-off my 1.10 and have been able to do everything ive wanted with it aslong as it is MarvelC. But i would use TeamWin for recovery i had problems not being able to wipe completely with ClockMod. Good Luck!

Hey where can I find football's ruu?
Sent from my Marvelc using xda app-developers app

[Q] Help: Brick DHD

Hi,
i have Htc desire Hd
unlocked
ace pvt ship s-on rl
hboot -2.00.0029
microp 0438
radio 26.14.04.28_M
eMMC-boot
i have unlocked it at HTCdev.com and flashed via fastboot modaco clocworkmode recovery - tried to flash rom but it types misstake -unable mount something usw,so i flashed clocworkmodrecovery v3.0.0.5 then i can sucesfully flash rom but system wont boot it stuck on white screen with htc logo
Any idea where can be problem?

kasparpan said:
Hi,
i have Htc desire Hd
unlocked
ace pvt ship s-on rl
hboot -2.00.0029
microp 0438
radio 26.14.04.28_M
eMMC-boot
i have unlocked it at HTCdev.com and flashed via fastboot modaco clocworkmode recovery - tried to flash rom but it types misstake -unable mount something usw,so i flashed clocworkmodrecovery v3.0.0.5 then i can sucesfully flash rom but system wont boot it stuck on white screen with htc logo
Any idea where can be problem?
Click to expand...
Click to collapse
Duplicated post. I have already answered. There's no need to open the same thread in,all forums
Sent from my GT-N7000 using xda app-developers app

kasparpan said:
Hi,
i have Htc desire Hd
unlocked
ace pvt ship s-on rl
hboot -2.00.0029
microp 0438
radio 26.14.04.28_M
eMMC-boot
i have unlocked it at HTCdev.com and flashed via fastboot modaco clocworkmode recovery - tried to flash rom but it types misstake -unable mount something usw,so i flashed clocworkmodrecovery v3.0.0.5 then i can sucesfully flash rom but system wont boot it stuck on white screen with htc logo
Any idea where can be problem?
Click to expand...
Click to collapse
Please make use of the search option before posting after all it makes life much easier
Sent from my Desire HD using xda premium

Flashed wrong Engineering HBoot - got recovery and fastboot

Hi again!
I was trying to Root my Desire Z but I made a horrible mistake - flashed Engineering HBoot for T-Mobile G2 instead of one for Desire Z (I guess it makes a difference) and now my phone stucks at boot. I can go into fastboot mode and into recovery. I think I need to flash correct HBoot, but I have no idea how. So, could you give me steps how to make my phone booting again? I hope it is possible.
Edit:
Ahm, I don't know if it's important, but I made a gold card in this phone while I was downgrading software.

You can flash either bootloader but the DZ one is often preferred as it has a larger system partition
can you write down current info from bootloader screen here

demkantor said:
You can flash either bootloader but the DZ one is often preferred as it has a larger system partition
can you write down current info from bootloader screen here
Click to expand...
Click to collapse
Sure.
VISION PVT ENG S-OFF
HBOOT-0.76.2000 (PC1011000) <------------- correct should be 0.84.2000, I've already downloaded it, but don't know how to install
MICROP-0425
RADIO-26.03.02.18_M3
eMMC-boot
OS Ver. 1.34.707.3

linoskoczek said:
Sure.
VISION PVT ENG S-OFF
HBOOT-0.76.2000 (PC1011000) <------------- correct should be 0.84.2000, I've already downloaded it, but don't know how to install
MICROP-0425
RADIO-26.03.02.18_M3
eMMC-boot
OS Ver. 1.34.707.3
Click to expand...
Click to collapse
Double check md5sum then flash the image through fastboot
fastboot flash hboot nameofhboot.img
then
fastboot reboot-bootloader
all should now be good
then boot to recovery and flash ROM of choice
see here for more info
http://forum.xda-developers.com/showthread.php?t=2348266
under the adb and fastboot section up top
look for how to why to for fastboot and you will get more in depth info
also check out the little more info on fastboot
if you get stuck or have more questions feel free to ask, and i highly suggest looking through the whole thread i linked ya
happy flashing!

[Q] Singapore RUU for HTC Wildfire S

Hi,
I am trying to find the RUU for HTC Wildfire S (Singapore Region).
Please help to advise where can I find that RUU? I have tried to find it but to no avail.
I have tried to flash Asia RUU but I always get a flickering screen upon OTA update.
How do I flash this RUU? Currently I am on CM 10.1 ROM and want to revert back to HTC Stock ROM (Singapore Region).
I had unlocked the boot loader using the HTCDev.com site.
My PC is running on Windows 8 Pro 64-Bit
Device Information:
*** UNLOCKED ***
MARVEL PVT SHIP S-ON RL
HBOOT- 1.09.0099
MICROP-0451
RADIO-7.57.39.10M
Feb 8 2012, 18:29:31

l_daruwala said:
Hi,
I am trying to find the RUU for HTC Wildfire S (Singapore Region).
Please help to advise where can I find that RUU? I have tried to find it but to no avail.
I have tried to flash Asia RUU but I always get a flickering screen upon OTA update.
How do I flash this RUU? Currently I am on CM 10.1 ROM and want to revert back to HTC Stock ROM (Singapore Region).
I had unlocked the boot loader using the HTCDev.com site.
My PC is running on Windows 8 Pro 64-Bit
Device Information:
*** UNLOCKED ***
MARVEL PVT SHIP S-ON RL
HBOOT- 1.09.0099
MICROP-0451
RADIO-7.57.39.10M
Feb 8 2012, 18:29:31
Click to expand...
Click to collapse
To flash an RUU you will have to relock your bootloader using the "fastboot oem lock" command in fastboot, and your phone will use the ASIA RUU

csoulr666 said:
To flash an RUU you will have to relock your bootloader using the "fastboot oem lock" command in fastboot, and your phone will use the ASIA RUU
Click to expand...
Click to collapse
Hi,
Thanks for the info. Could you provide me the file or the link to the file?

[Q] wildfire s (Re-Locked) unlocking bootloader

hey friends,
i have a real problem here, i have wildfire s a510 e and i want to flash custom Rom and Recovery, updated to ROM version 2.26.401.3
,Hboot S-OFF but Re-Locked , I've tried almost every method posted here, but every time i get stuck at "Fastboot flash unlocktoken unlock_code.bin .
anybody have any idea how to unlock the bootloader that has been relocked !?!
Here is my Hboot info.
MARVEL PVT SHIP S-OFF RL
HBOOT-1.09.0099
MICROP-0451
RADIO-7.57.39.10M
feb 8 2012,18:29:31
Thank you in advance

azee4ya said:
hey friends,
i have a real problem here, i have wildfire s a510 e and i want to flash custom Rom and Recovery, updated to ROM version 2.26.401.3
,Hboot S-OFF but Re-Locked , I've tried almost every method posted here, but every time i get stuck at "Fastboot flash unlocktoken unlock_code.bin .
anybody have any idea how to unlock the bootloader that has been relocked !?!
Here is my Hboot info.
MARVEL PVT SHIP S-OFF RL
HBOOT-1.09.0099
MICROP-0451
RADIO-7.57.39.10M
feb 8 2012,18:29:31
Thank you in advance
Click to expand...
Click to collapse
What exactly happens? You don't get the prompt screen? The command doesn't go through. Could you try to be more specific?

when given command "fastboot flash unlocktoken Unlock_code.bin" it gets stuck on uploading the unlock_code file,
i have unlock_code.bin file in the same folder as fastboot. phone is in Hboot/fastboot screen, USB drivers installed, everything as per instructions.
Hboot screen shows that phone is 'RELOCKED' but 'S OFF" .