Related
Hi,
I have just received my Qtek 9090 and I am very happy with it so far.
One thing I could not figure out yet is how to send an SMS with the keyboard without using the stylus? When I'm editing the SMS, I should be able to just press one key to send it and I can't find it.
Thanks for your help.
keyboard send message solution
Hi,
you can press "Lock/FN" key (lower left key) and then "Menu" (lower right key) and a menu appears. The you can use the navigational "joystik" to select "SEND" and the middle button on the joystick to select the option....
and there she goes......
okay, yes. On my system t seems that I can simply press "Menu" and then "Return". That's fine by me. Thanks.
Now another one Do you know a way to very quickly get in the SMS "Compose" window - without touching the screen?
Thanks,
François
Use the second softbutton above the call button to get into the messaging application. Press the navigation button to the side until you see Text Messages above the New menu. Hit the menu button on the keyboard. Use the navigation button and press "new"
Oystein
Is there a program that lets you send ringtones and file attachments via sms like on the Nokia communicator series?
never heard about anybody being able to attach anything to sms's
are you sure that the nokia dont just sendt it as pop3 over grps ?
the communicators don't have gprs. I used to have 100's of ringtones on my 9210 and sms them to friends' nokia phones.
@t0flus : Great, thanks. I was mssing the side nav button thing !!!
So far, I'm very hapy with this device even if coming from HP 4150 I find it a bit heavy but I don't carry a phone anymore so, all in one, it is okay.
I guess the ultimate thing would be an SDA with Wifi
Other question : anyone of you leaving bluetooth always on ? Whith what impact on power consumption? I could not try yet because I did have the opportunity to try while staying close from power source during the day to cope with possible low on the batteries side...
Thanks.
Also, this we, I'll purchase a TomTom Nav 3 BT unit. I'll report here how the things go with the BT headset and GPS together.
there is a new version of AE Button! The Button map application! Any experiences? Is there an improvement for the HD? Let´s test
Anyone tried?
I wish to know too =)
Is it free?
I have this registered.
The unregistered version is actually almost fully functioning and well worth trying.
I choose to register since I found the application useful and it seemed fair to pay the developer.
THANKS, for the new version alert. But, I suspect there is little new as the history details for this version are:
02.02.2009(v2.6.6):
Fixes:
Backlight works on HP 612c now
Languages:
Updated Traditional Chinese resources (thanks to Chow Yuh)
AE Button
I find this software very useful. It completely eliminates the need of locking/unlocking software for me.
I just set double or triple tap to answer and hang up keys. This will prevent accidental key press when taking HD out of pocket. To answer call, simple double/triple tap on answer key or simply slide on screen to answer (built-in screen lock will be unlocked during incoming call).
Set press and hold volume up to toggle wireless and down to toggle bluetooth.
This one single software solved all my screen locking + lack of buttons issues!! Believe me i tried touch lock pro, sensor lock, slide to unlock and what ever you can think of (I didnt like because I think its not really practical for me to be rolling phone 180 degrees or shaking back n fourth in meetings to answer a call.)...I know you guys may argue it has light sensors to unlock, but I'll be in meetings and presentations which might be low light conditions. I do not want to set very small for polling interval either. If you have tried all else, no harm in trying this.
if you guys face the same problem like me, this tiny software might be the right solution for you.
The best combination for me:
Gyrator2 (fine tuned based on my apps) + Lumos + AE Button Plus + Touch Response (for onscreen keypress only).
The only flaw that i could find to complain is that they should really change the icon...it looks like bread/potato/or whatever...
Headset Buttons
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
noctifer said:
Hi there,
is this program able to capture the button press events from a headset wired/wireless?
What I'd like to achieve is, to switch to the next song in Mediaplayer as long there is no incoming or active call.
Is that possible?
Thx in Advance
Steve
Click to expand...
Click to collapse
Hi, I believe not. I understand the press events from headsets and bluetooth AVRCP are actually trapped in the hardware by HTC and by-pass the operating system and are sent directly to TF3D music or WMP.
If you check on the AEB plus site: http://ae.inc.ru/ it says the app is not for specific applications.
(Also: the AEB+ icon does look like a loaf of bread !!)
Will it allow me to remap the Home button on the Touch HD?
CorruptedSanity said:
Will it allow me to remap the Home button on the Touch HD?
Click to expand...
Click to collapse
Nope. All the others but not the home button.
I have:
1. volume up. 1 press = arrow up, 2 press = volume up, long press = plamp (flash light)
2. volume down. 1 press = arrow down, 2 press = volume down, long press = resco notes recorder (auto)
3. OK / back. 2 press = rotate screen 90 deg
I keep the long press on phone end and long press on phone start handled by the system.
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
CorruptedSanity said:
Dave, thanks a lot and you have some very smart short cuts
I may very well adopt them too.
Click to expand...
Click to collapse
Thanks, but I'm needing a suggestion for replacing the flash light. Never used this now "for real" so I shall find something else for the long volume up press ...
I have almost identical settings but use the long up as a bluetooth toggle. This is a fantastic program and really eliminates one of the few shortcomings of this phone.
Cheesy Dave said:
long press = plamp (flash light)
Click to expand...
Click to collapse
do you know where i can get this plamp please?
P Lamp v1.5 http://pda.jasnapaka.com/plamp/
Question guys,
How do I map the call button to long press (like the smallest long press ever) to get the Start menu?
Thanks
Sorry, I don't understand what you want. Is "call button" the "end call" or "start call" ?
Dave, call button is the left-most button that answers/makes a call. If it were colored, it would have been green.
I want to short press it to start menu (heres the tricky part, I have Quick Menu as my start menu).
Basically I miss the Start button from my TyTn II (Kaiser) and the scroll on the top. I have managed to set the volume buttons as scroll up/down and want the start call button to imitate the start menu button when I long press it. But I want to long press it for as little time as possible. So say 1 second as opposed to 3 seconds.
I see. So, two points:
1. Get quick menu
2. Use a "short" long press
I asked because the green/start left button is assignable in the standard settings - button to the <start menu> but I don't know how to do this to quick menu. I guess if you make a short cut to quick menu and drop this somewhere in the Programs folder in windows (or a sub-folder) then the standard settings - button should find it OK.
But, for option 2 I have no idea. Instead of the "short" long press how about using AEB+ with a double press ?
Dave, I see from the options that you can set the delay. I guess this from the "Key Press timeout" menu where you can select units of time starting with 200ms to 900ms. I am guessing that 200ms of time needed for a long press would be the shortest longpress possible.
Any how, how to assign the green button to start menu? It doesnt work for me. I have it as 2 presses or 3 presses or long press for start menu but nothing happens.
one problem it works to rotate(volume up which i assigned) but as soon as i make a call or recieve a call it no longer works untill i soft reset???? im i missing a setting or something? i have duttys rom, please help! : ) thanks!
Hi,
I have the following problem with AE Button plus with my Touch HD.
I had the problem with closing the phone during i was taking it out of my pocket.
I installed AE Button plus and assigned only to the Red button a function. All is OK, when the phone is ringing the Red button is not working, but the problem is, that when i pick up, it is not working again and i have to end the call with the touch screen button and it is very annoying.Is it possible this Red button function to work only up to the moment i have answered and after that to have normal button functionallity?
PS. Sorry for my bad English!
AE Button Plus - please help
Please, help me with the above issue!
Thanks in advance!
why is it annoying to use the touch screen to end the call?
I would suggest to leave alone the single click of red button but instead map a double click function you want to the red button.
I've had this problem previously. I love AEBPlus and think it is probably the best app on the phone. You need to uncheck the option under 'other options' for 'drop on red key'. Paradoxically this should not be checked. When checked I cannot drop on red key but when unchecked I can end call using this hardway end key. Let me know how you get on!
The AE Button Plus didn't seem to work on my Blackstone (HD). It would work after being reset but after a while, the mapping has no effect anymore. I want to map the volume up/down button to "Up/Down Arrow" and the Long Press of the Volume Up button to run the S2U2 application. Anyone has similar issues?
I have problems with AEButton too. I assign "volume up" to turn display on/off at one click. Sometimes, it works. Sometimes, it brings up the voume control. Annoying.
tatou said:
I have problems with AEButton too. I assign "volume up" to turn display on/off at one click. Sometimes, it works. Sometimes, it brings up the voume control. Annoying.
Click to expand...
Click to collapse
That is exactly my problem. I should not have paid for the software if I knew that it works intermittently.
Do you have some taskbar installed? Try to remove.
When I swapped from the iPhone to android, I really missed the button on the top of the phone to end calls. It was very convenient, I think.
I was therefore delighted to see that the desire had a button on top that I upgraded from my hero immediately (amongst other reasons of course!)
Problem is, when you press it while in a call, it just turns the screen off. Does anyone know if someone has developed a hack to end the call with the power button?
BTaylor927 said:
When I swapped from the iPhone to android, I really missed the button on the top of the phone to end calls. It was very convenient, I think.
I was therefore delighted to see that the desire had a button on top that I upgraded from my hero immediately (amongst other reasons of course!)
Problem is, when you press it while in a call, it just turns the screen off. Does anyone know if someone has developed a hack to end the call with the power button?
Click to expand...
Click to collapse
Download and flash the Defrost 0.9 ROM from richardtrip. In Accesibility in settings, you can then enable the end the call from power button
While froyo is cool, I'd prefer to do this in my current sense Rom.
-------------------------------------
Sent via the XDA Tapatalk App
BTaylor927 said:
when you press it while in a call, it just turns the screen off. Does anyone know if someone has developed a hack to end the call with the power button?
Click to expand...
Click to collapse
Strange that it doesn't work when in-call. I know it (the power button) disconnects/hangs-up a call whilst ringing, because I often accidentally press it whilst pulling it out of my belt case and it hangs-up the incoming call. Grrrrrr
Hey guys, I have XDAndroid up and running now, Google sync is working good too. But just a few unresolved things after doing searching:
I'm sure someone has been or has tried to work on a app that would remap different keys, correct? I keep pressing the home key, but it pulls up the menu so I have to hit back like 5 times to get to the home screen.
Any other general tips I should know?
thanks!
Well, the home key is the menu key by default & I don't think there are any applications on remapping the keys.
If you want a 'Home' key, open the app menu, then click on Spare Parts.
There, you can have a 'Home' key (the end button).
If you were to search around the forums, you would have found the same solution.
khoyifish said:
Hey guys, I have XDAndroid up and running now, Google sync is working good too. But just a few unresolved things after doing searching:
I'm sure someone has been or has tried to work on a app that would remap different keys, correct? I keep pressing the home key, but it pulls up the menu so I have to hit back like 5 times to get to the home screen.
Any other general tips I should know?
thanks!
Click to expand...
Click to collapse
You can go into spare parts and go to end button behavior and change it to home. As default the end button in android is set as power which I see as pointless because the power button we have on the Rhodium also functions for power.
The power on the top of my Rhod210 doesn't function as the power button though? Maybe because its a newer build?
In case anyone is interested, there was such a revolt over @ PPCG that they have a thread dedicated to reverting the commit that swapped out the button layout. So power = home and end = power again, and long press on home brings up recent apps.
arrrghhh said:
In case anyone is interested, there was such a revolt over @ PPCG that they have a thread dedicated to reverting the commit that swapped out the button layout. So power = home and end = power again, and long press on home brings up recent apps.
Click to expand...
Click to collapse
That is how mine was with the 10/31 kernal but I had a weird problem where randomly I couldn't hear or speak to people who called me. Outgoing calls worked fine. After I manually updated the kernal to the 11/3 one my incoming calls were fixed but now both the power button and the end call buttons fuction as power. Not nearly as bad as no incoming calls but something I'd like to get sorted eventually.
hebrewhammer said:
That is how mine was with the 10/31 kernal but I had a weird problem where randomly I couldn't hear or speak to people who called me. Outgoing calls worked fine. After I manually updated the kernal to the 11/3 one my incoming calls were fixed but now both the power button and the end call buttons fuction as power. Not nearly as bad as no incoming calls but something I'd like to get sorted eventually.
Click to expand...
Click to collapse
Uhm that post should solve your problems... does it not? I'm confused if it doesn't.