Okay, this is the second time this error has popped up and it's starting to get on my nerves. Anytime I plug my phone into ANY USB port, and this is counting both 2.0 and 3.0 ports, I get the error bubble: Hardware ID Missing. Windows cannot identify the device plugged into the SAMSUNG Mobile USB Composite Device." Honestly, this is beyond irritating.
For one, I am not going to reinstall Windows 7. That's too much hassle for this. Second, ever since someone plugged their Droid into my USB cable so they could charge up their phone, this message started appearing. I tried to reinstall drivers (Samsung driver exe said it couldn't install), uninstall, disable, etc etc, but finally managed to get the damn computer to read it when I stuck it in the 3.0 USB port. Now, just 10 minutes ago, I plug the phone in, I get that error, on a 3.0 USB port.
So, now I have no idea what is going on, nor how to fix it. I've tried searching, but there are no answers. Or, the possible "solutions" don't even work even remotely close.
I could really use some help on this. And, again, please do not mention "Reinstall Windows". That's just too much of a hassle and I'm not going to do that.
You may not want to try this either but try a system restore
Sent from my SPH-L710...if some one helps you press the thanks button
Volknochi said:
Okay, this is the second time this error has popped up and it's starting to get on my nerves. Anytime I plug my phone into ANY USB port, and this is counting both 2.0 and 3.0 ports, I get the error bubble: Hardware ID Missing. Windows cannot identify the device plugged into the SAMSUNG Mobile USB Composite Device." Honestly, this is beyond irritating.
For one, I am not going to reinstall Windows 7. That's too much hassle for this. Second, ever since someone plugged their Droid into my USB cable so they could charge up their phone, this message started appearing. I tried to reinstall drivers (Samsung driver exe said it couldn't install), uninstall, disable, etc etc, but finally managed to get the damn computer to read it when I stuck it in the 3.0 USB port. Now, just 10 minutes ago, I plug the phone in, I get that error, on a 3.0 USB port.
So, now I have no idea what is going on, nor how to fix it. I've tried searching, but there are no answers. Or, the possible "solutions" don't even work even remotely close.
I could really use some help on this. And, again, please do not mention "Reinstall Windows". That's just too much of a hassle and I'm not going to do that.
Click to expand...
Click to collapse
I had the same issue what ended up fixing it for me was watching when I plugged the phone in after a clean driver install and stopping Windows from downloading and installing an updated driver. Dont know if its the same for you but that fixed it for me. I was really frustrated by it and found no help either.
probably an easy fix
definitely don't need to reinstall windows or do a restore. But just to be sure, you don't have kies installed right? Seems to cause problems.if there's no kies installed, go into the device manager and find your phone whatever it's listed as right click and uninstall. Check the little box that says, "delete the driver software for this device". do this for any devices relating to yours. Including the stuff under modems,ports,USB controllers.and tick that box that delete driver software for this device every time you uninstall something. Now, not saying it's necessary but wouldnt hurt, reboot the pc. Then with your phone unplugged, reinstall the Samsung drivers for the phone. Now to make sure windows doesn't DL its own drivers,disconnect from the internet and plug the phone back in. Should be all good.
I won't do a system restore, that won't do anything. Not to mention it would erase some programs that were installed (not related to phone). So, not doing that. Also, my computer will not automatically update any drivers or any thing else, as I have it set to manual mode.
And, I do not have Kies installed. It never worked for me properly, when it came to driver installation. I've done the "go into device manager" bit many times before, it still likes to play the "Hardware ID doesn't match" card. Drivers won't install either. I don't know what it is, but damn this is the most stubborn thing I've ever encountered.
i've post this in other forums today. what i do to get it working is i toggle USB debugging and try it out, then start toggling the ptp and mtp until it works. the combo that works for me is turn on debug, plug in computer, unplug, turn off debug, plug in. if it doesnt work then i toggle back and forth MTP and PTP. 5 tries at most, for me. Also, i did a nandroid back to my oem ICS that was 2 weeks old and just rooted. the problem is worse there. i'm using freegsmr6 with trinity kernel on Tmo. hope it helps.
Ditto
Yeah that whole "Hardware ID missing" was an irritating situation. This is what I recommend as far as making it work.
1. Plug in.
2. When you get the error message, I think its because of a conflict with the ADB interface. Go to Settings, Developer Options, and check off USB Debugging.
3. Plug in once again and it should work. If not, try toggling between Camera and MTP.
I have Windows 7 Ultimate and it works fine for me
I always get that error as well with my SGS 3. I have to reinstall Kies everytime it does that which is annoying.. ANyone has a permanent solution about this?
Fix for me was...
1-plug in phone. Get the hardware ID message. Leave phone plugged in.
2- open device manager. Click on. Android Phone and Uninstall Samsung Android ADB Interface. Also check the "delete software driver" when the dialog box shows.
3-still in device manager. Scroll down to Universal Serial Bus Controllers. Uninstall Samsung Mobile USB Composite Device.
4-unplug phone.
5-reboot pc.
6-install SAMSUNG USB drivers from their site or from here
http://www.epiccm.org/2012/06/cwm-recovery-on-all-sgs3-lte-variants.html?m=1
7-reboot or not. Plug in phone.
This worked for me and no issues for the last 6 days. YMMV..
this works!
stevounit said:
yeah that whole "hardware id missing" was an irritating situation. This is what i recommend as far as making it work.
1. Plug in.
2. When you get the error message, i think its because of a conflict with the adb interface. Go to settings, developer options, and check off usb debugging.
3. Plug in once again and it should work. If not, try toggling between camera and mtp.
I have windows 7 ultimate and it works fine for me :d
Click to expand...
Click to collapse
But why this problem now out of nowhere when everything worked fine before.
Sent from my SPH-L710 using xda app-developers app
Hardware ID missing - SOLVED!!
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
I've done just that, I've connected my S3 to the PC several times, I've also rebooted twice and I've never seen that stupid message again - while of course everything works as expected.
:good::good:4 days later, several times rebooted (phone and PC), several connections with Kies and I have NEVER seen that error again - it works!!
UPDATE!! (Oct.11.2012)
After a few Kies updates and going through various ROM's:
- the procedure listed above works 100% but a few steps are just not needed (redundant) - see bellow
- the problem is mostly caused by Windows "forcefully" trying to install its own drivers, rather than allowing Samsung's suggested.
- Samsung's fault is providing "updated" drivers that don't always work (hence, use the suggested 1.4.6.0 drivers)
- Following EVERY Kies update, DISCONNECT from internet before plugging your phone (otherwise you'll have to go through this, AGAIN).
Some suggested here that plugging the phone into a different USB port (without disconnecting from internet) would be the culprit - which happens to be true, but as a mere effect, not the cause: every time an unknown device is plugged into a different USB port, Windows is trying to download/install the appropriate drivers if it doesn't recognize the hardware - and there you are again.
So, the simplified procedure becomes:
1. Not needed - leave Kies installed, as is - no harm at all
2. N/A
3. YES
4. Not (always) required
5. MUST
6. MUST
7. MUST
8. Yes
Furthermore, if still interested in connecting your I747(M) as UMS (USB mass storage) the solution presented here works. I tested it myself - read my comment on this post for the very few existing hiccups.
- while installing the USB mass storage device drivers you don't have to disconnect from the internet
Install Drivers
Have you tried just installing the drivers directly from Samsung? That is all I did when I had problems and it worked.
tyler1037 said:
Have you tried just installing the drivers directly from Samsung? That is all I did when I had problems and it worked.
Click to expand...
Click to collapse
For someone experiencing the "hardware ID missing" error, just reinstalling the drivers won't do anything. Like many others, I've been banging my head trying to solve this for quite some time; the suggested steps are truly a compilation of successful ideas and trials mingled with tons of frustration, coming from my own experience as well as from many different people and forums.
If, on the other hand, you had a different type of connectivity issues - without this error, then, yes, reinstalling the drivers is Samsung's recommendation.
billard412 said:
definitely don't need to reinstall windows or do a restore. But just to be sure, you don't have kies installed right? Seems to cause problems.if there's no kies installed, go into the device manager and find your phone whatever it's listed as right click and uninstall. Check the little box that says, "delete the driver software for this device". do this for any devices relating to yours. Including the stuff under modems,ports,USB controllers.and tick that box that delete driver software for this device every time you uninstall something. Now, not saying it's necessary but wouldnt hurt, reboot the pc. Then with your phone unplugged, reinstall the Samsung drivers for the phone. Now to make sure windows doesn't DL its own drivers,disconnect from the internet and plug the phone back in. Should be all good.
Click to expand...
Click to collapse
Just wanted to say thank you. Did this and the last 2 days, works everytime. I made sure that after the first time I plugged the phone in after doing all this, and the screen pops up asking what I wanted to do, made sure to check the box for "do this everytime" and then choose the view folder option or whatever that is.
Thank you again,
Whiteice
One thing I have tried which might help others - I had the Android Developers toolkit installed on my machine, which I've removed and I also removed the HTC Sync software which was for my old desire.
Rebooted, installed the SG Toolkit (can't remember which post I found it in) and then chose option one after selecting firmware to install drivers.
I cancelled the "Windows Updates" bit of the driver detection and it found the first item, and had "item disconnected" for the remaining three.
Unplugged and plugged back in and voila it works.
This worked for approx 5 mins and then stopped, however I did all the above with debugging on, debugging is now off and all seems well (touch wood). However looking at putting on a different kernal to expose storage as mass storage and also get around cifs issues.
Hope this helps someone.
nacos said:
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
I've done just that, I've connected my S3 to the PC several times, I've also rebooted twice and I've never seen that stupid message again - while of course everything works as expected.
:good::good:4 days later, several times rebooted (phone and PC), several connections with Kies and I have NEVER seen that error again - it works!!
Click to expand...
Click to collapse
Thank you so much for this. This solution worked for me.
nacos said:
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
I've done just that, I've connected my S3 to the PC several times, I've also rebooted twice and I've never seen that stupid message again - while of course everything works as expected.
:good::good:4 days later, several times rebooted (phone and PC), several connections with Kies and I have NEVER seen that error again - it works!!
Click to expand...
Click to collapse
Thanks for this i will try it tomorrow as still new to these tabs.
For moment i change to camera PTP and it pops up, so at least i can use it for now.
Will let you know how i get on.
Best wishes :good:
adamspud said:
One thing I have tried which might help others - I had the Android Developers toolkit installed on my machine, which I've removed and I also removed the HTC Sync software which was for my old desire.
Rebooted, installed the SG Toolkit (can't remember which post I found it in) and then chose option one after selecting firmware to install drivers.
I cancelled the "Windows Updates" bit of the driver detection and it found the first item, and had "item disconnected" for the remaining three.
Unplugged and plugged back in and voila it works.
This worked for approx 5 mins and then stopped, however I did all the above with debugging on, debugging is now off and all seems well (touch wood). However looking at putting on a different kernal to expose storage as mass storage and also get around cifs issues.
Hope this helps someone.
Click to expand...
Click to collapse
The Android Developers toolkit DOES install the USB drivers 1.4.6.0 - which seems to be the ONLY one that works, BUT the rest of the steps suggested in my previous post are needed in order to get rid of the problem - otherwise the fix is just temporary.
Re-loading OS drivers corrected issue.
tyler1037 said:
Have you tried just installing the drivers directly from Samsung? That is all I did when I had problems and it worked.
Click to expand...
Click to collapse
I removed the updates to Kies on my Note and uninstalled the Kies update on the PC which is what started this issue of the OS not recognizing the device and then a fresh driver load for my phone from the Samsung site. Worked Perfectly, Thanks!
Cowoholy
Hi there.
I picked up a refurbed Incredible 2 (running 2.3.4) and am trying to get it to connect to PC so I can move files across between the PC and either internal memory and/or microSD cards. I'm having no luck on Windows 7.
I changed the Default Connection Type from Charge Only to Media Sync / Disk Drive / HTC Sync (after installing the HTC Sync software - NOT the HTC Sync Manager, which apparently only supports the newer phones) to no avail. I've tried them all, and they all have the same issue. I've done this both with and without USB debugging checked, and with "Unknown Sources" ("allow installation of non-Market apps") checked. I've also tried uninstalling Sync, installing Sync Manager, trying again (no change), and then reversing it (uninstalling Manager, and reinstalling Sync) - again, no change. Sync does not see the phone while connected and in "HTC Sync" mode via the Default Connection Type (or anything else).
When I plug the phone in to the PC the PC shows a "USB Device not recognized" and sometimes I will get a "Driver did not install successfully" message. Device Manager is showing one Unknown Device with a "!" issue under the USB controllers category I'm assuming is the problem. There is also nothing showing up under the Disk Drives category in my Device Manager other than my hard disk, even though some of the guides I'm looking at say I should have something related to the phone in there.
I've tried connecting it with 2 different USB cables, just in case the one that came with it was not fully functional. I've used the second cable for data transfer in the past, so it should work. No difference.
I've restarted several times, with and without the microSD card installed. I've tried unmounting and remounting the card as well, no difference.
Am I missing some kind of Win7 drivers for the Incredible 2 that are not installed automatically and/or with the HTC Sync install? I've seen some references and links to HTC drivers that are apparently not on the HTC site, but I am very leery of downloading an .EXE from a random website and just installing it to see if it works. I'd think if this was necessary, it would be on the HTC site.
Anyone know what gives here? I can't think of anything else to try.
Am I a complete newb here, or is this potentially an issue with the refurb'ed phone?
Thank you very much for any assistance!
I use the driver linked on the revolutionary.io site (http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe) and I have never had an issue.
Sent from my DInc2...
update
Hi there.
I attempted this, but still no change. Do you know where this installs the drivers to, so I might try to manually point the Device Manager "Unknown Device" to them?
When I try to update the driver via Device Manager, however, it is telling me the following:
"Windows encountered a problem installing the driver software for your device.
windows found driver software for your device but encountered an error while attempting to install it.
'Unknown Device'
Windows has stopped this device because it has reported problems (Code 43)"
Thank you for any further assistance or ideas.
Doesn't matter where you place them but you'll need to go to control panel/system/device manager find the device with the issue and select update driver.... Then it should be recognized
Sent from my HTC Droid Incredible 2 using xda app-developers app
OP - do you have any other USB device drivers for other smartphone(s) installed on your PC? If so, uninstall all of them and reboot it clean.
Assumed that you are running VZW stock software - phone isn't rooted ?
Is your HTC Installer running this version - 3.0.0.007 - that's mine (have it running on W7 Pro and Ultimate on desktop & 2 laptop, no problems for me - I also have it running Win 8.
Uninstall HTC Installer & reboot - without connecting the phone. Turn off firewall & antivirus on your PC temporary, reconnect the phone & follow the prompts to reinstall HTC drivers. Once it's done, disconnect the phone & power down the computer.
Restart the PC and then reconnect the DI2 to it, hopefully - it will recognize the phone and allow you to connect & recognize the mSD card for data transfer, etc.
Please post any specific error messages as you see them. Good luck.
A common cause of "unrecognized USB device" is a bad cable. Try another. Or, try a different USB port on your PC.
Hi guys
Im proper stumped for ideas now ive been trying to connect my phone to my pc all morning but to no avail.
Here's what i tried so far:
Different usb leads,
putting the usb leads in different ports,
Uninstalled HTC Drivers and then re installed them
Enabled debugging options and USB debugging
All of these and still nothing
When i connect the phone to the pc the phone starts charging and the PHONE makes the normal beeping noise when its charging but nothing on the pc, when i connect something else to the PC the pc does a little beep to tell its recognized the usb device connected but with the htc one m8 it doesnt do anything, Ive been into device manager and nothing there in regards to the phone.
So im out of ideas so came here for help.
Thanks in advance
brookey12 said:
Hi guys
Im proper stumped for ideas now ive been trying to connect my phone to my pc all morning but to no avail.
Here's what i tried so far:
Different usb leads,
putting the usb leads in different ports,
Uninstalled HTC Drivers and then re installed them
Enabled debugging options and USB debugging
All of these and still nothing
When i connect the phone to the pc the phone starts charging and the PHONE makes the normal beeping noise when its charging but nothing on the pc, when i connect something else to the PC the pc does a little beep to tell its recognized the usb device connected but with the htc one m8 it doesnt do anything, Ive been into device manager and nothing there in regards to the phone.
So im out of ideas so came here for help.
Thanks in advance
Click to expand...
Click to collapse
Have you tryed with htc sync manager installed?
BernardoMorais said:
Have you tryed with htc sync manager installed?
Click to expand...
Click to collapse
Yes forgot to add that as well, tried it already still nothing
Uninstall all HTC Drives and HTC Sync.
Plug the phone to USB, and see if the PC responds. Does it try to automatically install HTC Sync? If so, don't allow it.
Does the PC recognize the phone at all in Device Manager (with all HTC software uninstalled)? If so, select the option to select drivers manually then pick generic Android MTP device (or something to that effect).
Have you rebooted the pc... Then plug in the phone?
And did it work on that pc before?
redpoint73 said:
Uninstall all HTC Drives and HTC Sync.
Plug the phone to USB, and see if the PC responds. Does it try to automatically install HTC Sync? If so, don't allow it.
Does the PC recognize the phone at all in Device Manager (with all HTC software uninstalled)? If so, select the option to select drivers manually then pick generic Android MTP device (or something to that effect).
Click to expand...
Click to collapse
When i plug the phone to the usb the pc doesnt respond as in recognize it, the phone does as it starts charging but not the pc, uninstalled all htc drivers and htc sync but still nothing, tried rebooting pc after uninstalling and still doesnt recognise me even plugging it in or in the device manager
brookey12 said:
When i plug the phone to the usb the pc doesnt respond as in recognize it, the phone does as it starts charging but not the pc, uninstalled all htc drivers and htc sync but still nothing, tried rebooting pc after uninstalling and still doesnt recognise me even plugging it in or in the device manager
Click to expand...
Click to collapse
Not a good sign that your PC doesn't recognize at all. Its possible the phone's USB port is damaged, so it will charge but not connect to sync to data.
Can you try a different computer?
ill try and update u
OMG... finally got it working. I installed HTC Sync Manager again and decided to run it and see what happened. While it was scanning for music on my computer windows installed the drivers. More than once it seems.
Now I need to know if I can uninstall Sync Manager but keep the drivers. It keeps opening up and I don't know if it's safe to flash recovery if that's going to happen.
Flashed TWRP successfully and made my back up.
--------------------------
OLD NEWS BELOW:
Here's the deal... I just flashed the 3.x RUU so I'm stock but I'm unlocked and s-off. I'm trying to flash TWRP via fastboot so I can get a custom ROM on here. I turned on USB debugging on the phone.
First of all, that stupid HTC Sync manager keeps trying to install and I don't know how to stop it. Googling has not helped with this.
Second, I can't get the device to be seen in adb, or at least not online. I seem to be going backwards with all the steps I have taken to try to get this to happen.
I'm using dotatt's adb package. When I attach the phone while it is off windows looks for drivers and usually fails. One time it seemed to work and adb saw the device but then when it boots up that Sync Manager wants to install so I decline. Then my phone was seen but listed as offline.
So I tried uninstalling all HTC things on my computer and reattach phone. Didn't help anything. I tried installing the HTC Sync then uninstalling it thinking I would get the drivers, no go.
I grabbed these Universal ADB drivers http://www.koushikdutta.com/post/universal-adb-driver linked to from a twrp page here https://twrp.me/devices/htconem9.html
Nothing lists as a device in ADB at all now.
My windows Device Manager shows "Unkown Device" under "Other Devices" with no driver listed.
Tried this:
[TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
http://forum.xda-developers.com/showthread.php?t=2588979
Still not working.
ACK! Can anyone help me out?
Is there still an issue with using usb 3.0 ports? I feel like I heard something about that way back when.
That's pretty much how it's always been. Best way to get the appropriate drivers is to install HTC sync, let it do its thing, reboot the PC, then uninstall HTC sync without removing the drivers. To the best of my knowledge, been that way since at least the days of the Incredible, if not before. At least it's how I've always gotten the drivers to use adb.
Yeah I remember that from the Rezound, which is why I did that, but it seems that the drivers didn't actually get installed this time until I let HTC Sync Manager start running and scanning my computer. That's when I saw the message that it was looking for drivers and twice it told me it installed them.
I would think it would have them installed during the 'actual' installation process. So I guess I just uninstalled prematurely. Seems weird. But it's working now so all good.