hello everyone
I bought a gtab pro 8.4 and first thing to do was to root, install a proper recovery and of course a custom kernel. After that I debloated my stock rom but I deleted nothing I would call important.
this is my first upper class samsung device since years (I own a galaxy nexus) and I have a question that may some of you could answer:
Does SideSync:
- need KNOX to work?
- depend on other preinstalled apps?
- not work if binary counter for custom roms or kernel is increased?
I can't get it to work, neither with USB nor over Wifi...
Thank you all
edit: or is sidesync on our tabs only to control the mobile phone and not to be controlled by a computer?
I have a GTP 8.4 and an S4 phone. I have SideSync 3.0 setup with them paired.
1) I believe SideSync is only between phone and tablet - no PC involved or supported.
2) After playing with it for 30 minutes or so, SideSync looks completely useless to me.
- SideSync will only connect the devices when they are both on the same WiFi network. So, if you're out and about, you can use it. If you're using your phone as a hotspot and the tablet connected to the Internet via the hotspot, you also can't use SideSync.
- There is a free app for Verizon customers called Verizon Messages, which I already have on my tablet, It gives me full SMS/MMS mirroring between my phone and tablet - without having to pair the devices.
- Leaving SideSync running all the time is a battery hog, so you wouldn't want to do that. So, when you DO want to use it, you have to start it on both devices. Well, if I'm going to pick up my phone to start SideSync, just to control it with my tablet, what's the point? I can just do whatever I need to do on my phone when I pick it up.
- Being able to place/receive calls using my tablet, with it actually going through the phone might be cool sometimes, but, as I said, if I have to grab my phone and start SideSync first, I'm probably just going to make the call using the phone. Alternatively, I'd try to figure out a way to pair my tab to the phone using Bluetooth and use the tablet as a handsfree device instead, leaving SideSync out of it.
If anyone can tell me something useful about SideSync, I'd love to hear it. I may have tried it and totally missed some cool use case.
any ideas why I can hear caller but caller cant hear me??
Related
Anyone using an Andriod phone with their Note 8.0 utilizing tablet talk and all share app? I have an iphone 5 jailbroken which I use for free tethering however I was thinking of getting an andriod phone to take advantage of tablet talk and all share apps. I had a BB torch with the BB Playbook utilizing the bridging functionality and it was great! Wondering if I will have the same experience if I went all Andriod or Samsung. Any feedback would be greatly aprreciated. THANKS in advance!
I use TabletTalk all the time between my Note 8.0 and DROID Bionic. Unfortunately, in comparison to my Nexus 7,there seems to be more issues. The biggest one are the Bluetooth connection of one of the devices (not sure which one might be both) just kinda stupid working between the two devices. The device need a full reboot to connect. This is less frequent between a WiFi connection but still prevalent none the less.
It really probably had something to do with my phone or ROM though. Even when I Bluetooth tether, the device just craps out eventually.
Sent from my GT-N5110 using XDA Premium HD app
I find after X amount of time Bluetooth has to be turned OFF and then ON again for it to actually work. Otherwise e.g. Tablet Talk connection to my S3 will fail, my keyboard won't be able to connect, etc. Don't ya just love Android and Samsung's Bluetooth capabilities? >_<.
Past that I've had no issues, haven't tried audio or tether yet.
AllShare Play / Link works fairly well and unlike the version on my phone, is still able to see regular DLNA devices (without making me go straight to e.g. Video Player or Gallery). Using it with MiniDLNA on Debian stable, it can be confused and refuse to playback some files with a Foo.jpg cover art file assocaited with Foo.m4v, etc. Third party solutions for DLNA are widely available on Google Play.
Hey guys so I tether once and a while when needed with my verizon gnex which works just fine with multiple devices like my laptop and nexus 7. I figured this was a piece of cake easy thing for my chromecast as well, but it appears I was wrong. I am currently on the kevdliu 4.3 rom which continues to allow my tethering ability but for some reason my chromecast cannot seem to work with it. Even if I do manage to connect to it which is rare, I cannot then access it from another device*nexus 7*. The cast button doesnt appear and when I then run the chromecast app it states that my chromecast isnt connected and tries to go through the connection process again.
So I know you are all about to say things like "maybe it wont work on the phone" or "this should go in the chromecast threads section" which for the second I almost did, but the interesting thing is my coworker with his galaxy s4 tethered just fine between my tablet and chromecast. He has tmobile and uses the official free one through them as he isnt rooted.
any suggestions?
edit, I am now seeing something interesting. It seems that although both my laptop and tablet appear to be connected to the tethering, if I started using my laptop first then the moment I picked up my tablet it then disconnects me from the internet on my laptop.
Have you figured anything out?
I currently am in the same situation too. I don't have a home wifi yet and use tethering for most of the things I do online.
I can't get anything to work whether trying to set it up from the phone or laptop.
Since AutoMate (https://play.google.com/store/apps/details?id=com.bitspice.automate) has been released in its first stable version I'm thinking about making my car 'smart'.
Until now I don't have any navigation system or else in my car, just a radio. But this app might replace the need to have to buy an Android Auto unit for about 500 bucks or even more.
The way I'm thinking about implementing it would be by using a 7" tablet, anything slightly bigger might be okay as well.
But I'm not sure about how exactly I should start.
My problems:
I think I need a special LTE data plan for the tablet (sharing the data plan of my phone via hotspot is not very intuitive)
Which tablet? (SIM card slot ruins many reasonable ones)
The small things: how to charge the tablet, how to fix it in my car, how to connect audio so my car plays its music
Another very important question: how do I get my phone's notifications on the tablet?
Is there anybody of you already running such a start up?
Or is there anybody planning to do so? What are your approaches?
I want to get this started and with your help I hope I will do so!
you really don't need a data plan for your car. Unless you drive more than 10 hours a day.
My Setup is easy. My cell phone is with me all the time and the internet sharing via Bluetooth is always enabled.
The Android will connect to it using a free tool named BT auto connect whenever the screen is turned on.
So you will have nothing to do but just power your tablet when you start the car.
It will automatically connect and share your phone's internet. It is energy friendly with BT with decent speed for most application except video streaming. (200KB max)
Nexus 7 2013 was the best option for this implementation, and the most common set up involved a paid kernel.
Search (USB ROM Nexus 7 on google). However, I found my tablet drain a lot of battery without reasons.
Hey guys, I have searched high and low for a solution to this problem but have come up empty so far. I just got a joying head unit and everything, including the easy connected app, seemed to work without issue. I decided well since I had the headunit running next to my pc that I would flash Malaysk's custom rom before installing it. After that, I reinstalled the app from various sources including the oem app but none of them seem to allow me to connect my same exact devices anymore.
Why is this important for me? I had planned on controlling a tablet in the back seat for my son who is still to young to put on show without trouble. Essentially, this would allow me to never have to reach back there to help him out.
I have read, from joying, that it would no longer work after flashing new firmware but that seemed to not be the case from some things I had read here (please correct me if I am wrong on that). Tried different cables and ports but no luck. I did read that a license might need to be carried over but not sure what that entails as I can find ZERO info on this easy connected app/problem. I hope that this is a very simple fix and that I did not jump the gun again for the chance to flash a new device (its addicting and I blame XDA for my problems...).
I did try and find some other apps that might allow me to do the same thing. RemoDroid seemed promising but didn't function. Most other ones are meant for controlling from a pc or browser and just weren't useful for the task at hand. I am open to solid suggestions. I use all Android devices and avoid the Apple juice. Any insight you guys can offer will help a tired Dad out. Thanks!
Edit: Solved-ish
The easy connect app seems to function now intermittently. Not sure there was a specific thing that I did to fix it. Seems to work when I launch easy connect app right after booting up and nothing else. Messing with other apps seems to cause a problem for my devices. Also, switching between my devices(phone and tablet) may also have been causing a problem, not sure yet. I suppose I'll just keep trying to make it work reliably until I break it again.
On the previous version of the easy connect app, you were able to disable Drive Mode from launching. Not so on the newer version with Android WiFi. If anyone has a solution to that I would appreciate it as the Drive Mode app is useless for my needs.
Note 4 - USB - works great. I have yet to try over wifi
Note 10.1 N8013(lollipop rom) - USB/Wifi - works great (disable smooth mode, remote device screen cannot be turned on with easy connect "Home" button)
http://forum.xda-developers.com/and...1024x600-rk3188-joying-try-uploading-t3262030
I tried several different apk's but they all have similar results and end with a connection failure.
I haven't yet tried going back to stock firmware so that might be worth trying. I installed the headunit in my car so I'm not as willing to keep flashin it as I have to park down the street from my house.
So not sure what magic I used but I was able to get it working for a moment and then it stopped again. USB and Wifi android mirroring were working so I know my current firmware/setup is functional!! Once I got it working I started configuring some other apps and when I went to run it again it wasn't connecting. I guess I'll just keep messing with it until I can figure out what got it working again.
With the newer version of the easy connected app, I can no longer disable launching of drive mode on connect. Is there a way to disable that option with the 1.4 version?
Hi.
Is it possible mirror in wifi with android?
Can you explain the way?
Inviato dal mio SM-G920F utilizzando Tapatalk
Hi I have an stock Nexus 7 running android. I have been looking for a way to cast my phone onto my tablet. I want my S6 to connect to my nexus via whatever means (preferably a wireless means bluetooth, wifi, etc...). I kind of want my nexus to be essentially a touchscreen monitor for my phone.
The only things I can find when I search for this are all related to chromecast and miracast trying to use their android devices to cast to their TV's.
Thank you for you assistance.
Easy...
- on your phone install https://opensourceexcedio.wordpress.com/2010/10/28/droid-vnc-server/
- on N7 install https://play.google.com/store/apps/details?id=com.realvnc.viewer.android
As an extra bonus you'll be also able to control your phone from Linux/Mac/Windoze.
Thanks for the advice. I am having trouble getting it to work but this seems to be what I am trying to do.