Hello,
I have made the mistake of format /emmc during flashing of a rom in CWM. After the ROM was flashed, when I look into settings/storage, SD card is not detected and when I try to download, it says No SD card inserted. Is there any way to fix this?
Related
Hi can any one help i tried to install the desire hd rom, the instructions suggested partitioning sd card before installing the rom
which i tried to do using Mini tool partition wizard unfortunetly after wiping partition and the creating new partion my sd card would not mount as i wasnt sure if i should have formated the sd card at this point as that option was still available. but the instructions didnt mention wether i should have formated after creating new partition.
So anyway to cut a long story short i switched the phone of instead, hoping that when i restarted it i would be able to mount the sd card. But now i had a new problem my phone now would not detect my sd card altogether
Does any one know how i can make my sd card detectable again or will i need to fork out for a new sd card
Have you tried it in another device, say a PC card reader?
Had the same issue. Everything worked fine after formatting the SD card with Gparted. What I did wrong is that I made 3 EXT4 partitions for Data2SD and the computer didn't recognize the card. Used Recovery to mount the card and Gparted to repartition it. Everything worked fine afterwards.
yes sort of tried my friends sd card in my desire and it detected it so its definetly the my sd card that faulty
thanks for replying to my message i tried mounting the sd card in recovery using recovery manager but my phone wont mount it as it not detecting the sdcard do you think i might have better luck with gparted and if so do you have a link where i might be abe to down load it.
my desire stop recognizing sd card wtf
it says no sd card ...
p.s my clockwordmod recognize it
Try a different newly formatted SD Card?
If your partitions are corrupted, you might get that message.
i mounted and formated my sd card via clockworkmod and still nothing i've tryed 2 more sd cards and still my phone dont read them
Well, this is beyond me, so try this link, this person had a similar problem.
http://forum.xda-developers.com/showthread.php?t=1075913
Although this is strange you can mount the sd card and format it so the above link may not help.
Bump anybody?
On my DInc, my SD card refuses to be read even though there is a card in the slot. If I boot to recovery, I can go under Mounts/Storage and Mount USB Storage to copy my ROMs etc to it from Windows Explorer.
But as soon as I boot into the Dinc, the SD card says "Preparing SD card" followed immediately by "SD Card Removed". What's the deal with this?
I've used a great number of ROMs and it simply hasn't worked in a while. I'm currently running Clutch 1.0.
Any ideas how to get my SD card working from the phone again? To reiterate, I can access the SD card if I reboot to recovery and access it under Mounts/Storage. Just not when the phone is booted up for use.
I think your best bet would be to reformat the sd card through a pc to FAT32. Make sure to copy all the sd card contents to a computer before formatting it. See if this helps.
Hey guys total noob here to android and flashing ROMs. I rooted my phone and flashed to TuchMi S3X 5.0. First installed 3.0, then went to 5.0. In both builds, my SD card wouldn't mount, i'd get a message saying "Preparing SD card" in the notification bar, then "SD card is safe to remove." When attemping to mount through Settings, nothing happens, and I can't mount in recovery either.
I've tried reformatting every which way I can think of, but still no luck. The same card worked fine in stock.
Any tips? I've searched all over the place but couldn't find anything pertaining to TuchMi S3X and external SD cards not mounting.
So i've determined that the issue is with the exFAT file system. If I format the card in FAT32 it works fine, but this is a 64GB card, and I want to use exFAT.
If i let the phone format the SD card when it is unformatted, it uses exFAT but the card STILL isn't able to be mounted...do I need a custom kernel or something?
diablo900t said:
So i've determined that the issue is with the exFAT file system. If I format the card in FAT32 it works fine, but this is a 64GB card, and I want to use exFAT.
If i let the phone format the SD card when it is unformatted, it uses exFAT but the card STILL isn't able to be mounted...do I need a custom kernel or something?
Click to expand...
Click to collapse
So bottom line the card still showed 64GB and worked as long as it was FAT32?
Hi everyone!
I upgraded to CM 13, big problem was the fact that my Samsung Evo 64 GB SD card was not usable as internal storage or external. I entered recovery mode and wiped all to install Cloudy 2.5. I have an issue now, the sd card is not formatted in its own original filesystem, and after i tried to change it to exFat or ext4 it shows me a 15mb sd card, rather then a 64 GB one.
How do I fix this?
You can take your micro SD card, put it in the adapter and then plug it to your computer.
After that you can take a software like "minitool partition wizard" and use it to format the micro SD card.
I figured out the SD card problem , i couldn't fix it for nothing until i did this.
FOR ANYBODY THAT GETS STUCK AT 20% or any other sd card problem with 6.0 roms
1. Backup all files on SD card (This will delete everything on your sdcard)
2. Install minitool partition wizard
3. Remove all partitions from SD card with partition wizard (Do not reformat)
4. Place SD card into phone
5. Let the phone detect SD card and try to reformat
6. chose either Internal or Portable Storage
7. Enjoy because it works perfectly for me now.
btw. im running a LG G3 D850 ATT