On my DInc, my SD card refuses to be read even though there is a card in the slot. If I boot to recovery, I can go under Mounts/Storage and Mount USB Storage to copy my ROMs etc to it from Windows Explorer.
But as soon as I boot into the Dinc, the SD card says "Preparing SD card" followed immediately by "SD Card Removed". What's the deal with this?
I've used a great number of ROMs and it simply hasn't worked in a while. I'm currently running Clutch 1.0.
Any ideas how to get my SD card working from the phone again? To reiterate, I can access the SD card if I reboot to recovery and access it under Mounts/Storage. Just not when the phone is booted up for use.
I think your best bet would be to reformat the sd card through a pc to FAT32. Make sure to copy all the sd card contents to a computer before formatting it. See if this helps.
Related
I’ve recently upgraded the SD card in my desire to a 16GB class 4 and its giving me some major issues! I’m running OpenDesire 4.0.1 and the sequence of events was as follows:
1. Inserted new SD card and formatted with gParted: 512MB Ext3 and the rest FAT32 (Ext3 partition was at the end – hope that’s correct!)
2. Rebooted fine and all the apps stored on the internal memory were present and correct. Those that I had moved to the old SD card were missing so I uninstalled them.
3. Tried to install Estrongs file manager from appbrain using the fast web installer function. This downloaded OK but the phone rebooted during installation. Tried again but same thing occurred again.
4. Tried plugging phone into PC. USB debugging mode started up fine but I wasn’t offered the option of mounting the SD card
5. Unplugged USB and inspected phone storage menu to find that no SD card was mounted
6. Rebooted a few times, removed and reinstalled SD card etc – still no SD card detected by the phone
7. Booted into recovery, connect phone to PC and used the “mount USB” option in Clockwork mod. This was successful and allowed me to inspect my SD card on the PC. Noticed that Dalvik cache and some apps (those not included as part of the ROM) were present on the SD card (FAT32 partition) – OpenDesire must have moved them there automatically (but why to the FAT32 partition and not Ext3?).
8. Rebooted phone out of recovery to check that those apps that appeared on the SD card were accessible in Android. Found that they were, which is strange given that the SD card was still not being detected by the system.
9. Decided to mount SD card again via clockwork recovery method and formatted the FAT32 partition with gParted.
10. Rebooted phone and found SD card still not detected and all those apps that had magically been moved to the SD card by OpenDesire were (unsurprisingly) gone.
11. Tried a few adb commands that I found in another thread but didn’t seem to have any effect.
Out of ideas – can anyone help?! Will try old SD card tonight and see what happens, but I don’t think there is a problem with the new card since I managed to successfully mount it through clockwork. I’m also wondering why the apps were moved to the FAT32 partition instead of Ext3? I thought that’s what the Ext3 partition was for?
Cheers
The FAT32 partition must be the first partition on your SD card, and it seems from what you've said that you created the EXT partition first.
Regards,
Dave
no the the FAT32 was first then the Ext3
OK fixed. Managed to mount the SD card on the PC via clockworkmod, deleted all partitions and rebooted phone. Phone detected SD card and asked me to format it. Did that and then added a ext partition using gParted.
SD Card Cant be Detected on Desire(Solved)
Hiii... guys.. even i went through the same problem.. and tried formatting using Linux,Windows.. but nothing happpnd... as a final trial i tried it to factory reset(i.e., SD CARD).. by using hp usb disk storage format tool ...... and it was successful...
As for now just google the Software
Good LUCK!
Hi can any one help i tried to install the desire hd rom, the instructions suggested partitioning sd card before installing the rom
which i tried to do using Mini tool partition wizard unfortunetly after wiping partition and the creating new partion my sd card would not mount as i wasnt sure if i should have formated the sd card at this point as that option was still available. but the instructions didnt mention wether i should have formated after creating new partition.
So anyway to cut a long story short i switched the phone of instead, hoping that when i restarted it i would be able to mount the sd card. But now i had a new problem my phone now would not detect my sd card altogether
Does any one know how i can make my sd card detectable again or will i need to fork out for a new sd card
Have you tried it in another device, say a PC card reader?
Had the same issue. Everything worked fine after formatting the SD card with Gparted. What I did wrong is that I made 3 EXT4 partitions for Data2SD and the computer didn't recognize the card. Used Recovery to mount the card and Gparted to repartition it. Everything worked fine afterwards.
yes sort of tried my friends sd card in my desire and it detected it so its definetly the my sd card that faulty
thanks for replying to my message i tried mounting the sd card in recovery using recovery manager but my phone wont mount it as it not detecting the sdcard do you think i might have better luck with gparted and if so do you have a link where i might be abe to down load it.
I tried to format my sd cards tonight via computer format option. However my computer shut down in the middle of the process and now I can't see my sd cards anymore. I can't mount it at all. When I go into the recovery to wipe it, twrp says failed.
Does this mean it's completely dead?
solved it.
googled and found this thread http://forum.xda-developers.com/showthread.php?t=1806059 for my internal sd card
and for my external, i used a card reader, plugged to pc, and reformat it.
also checked both cards for errors.
whew. i am never gonna reformat my cards again. ever.
So i have a sandisk 32gb micro sd card im using in my galaxy s3. It has been working fine until this morning when my phone started saying sd card had been removed please enter a new one, or something like that. The sd card cannot be seen in TWRP or in any file manager. In recovery i tried to wipe the external card and it just says it cant mount the external card.
I would have thought this was a problem with my phone, but I also cannot see the card when i put it in my computer. Other sd cards work fine on my computer (i dont have another micro sd to test with) but my camera's sd card worked fine. Anyone have a solution? I would be willing to format my sd card, but i cant even access it anywhere.
wizrd54 said:
So i have a sandisk 32gb micro sd card im using in my galaxy s3. It has been working fine until this morning when my phone started saying sd card had been removed please enter a new one, or something like that. The sd card cannot be seen in TWRP or in any file manager. In recovery i tried to wipe the external card and it just says it cant mount the external card.
I would have thought this was a problem with my phone, but I also cannot see the card when i put it in my computer. Other sd cards work fine on my computer (i dont have another micro sd to test with) but my camera's sd card worked fine. Anyone have a solution? I would be willing to format my sd card, but i cant even access it anywhere.
Click to expand...
Click to collapse
I hate to say it, but it would seem that your SD card went tango uniform. If another card is being seen in the S III then it is down to that.
wizrd54 said:
So i have a sandisk 32gb micro sd card im using in my galaxy s3. It has been working fine until this morning when my phone started saying sd card had been removed please enter a new one, or something like that. The sd card cannot be seen in TWRP or in any file manager. In recovery i tried to wipe the external card and it just says it cant mount the external card.
I would have thought this was a problem with my phone, but I also cannot see the card when i put it in my computer. Other sd cards work fine on my computer (i dont have another micro sd to test with) but my camera's sd card worked fine. Anyone have a solution? I would be willing to format my sd card, but i cant even access it anywhere.
Click to expand...
Click to collapse
In Win7, plug your SDcard into the card reader.
Type diskmgmt.msc into search or run.
Do you see your messed up SDcard in there?
If yes, you can format it, name it etc.
If that fails, find an app online called Gparted. (needs to burn to a CD)
This app works at boot and has fixed my most stubborn drive issues.
So my WFS stopped picking up my SD Card last night, when i start the phone up I get the notification thats its preparing the SD Card then I get SD Card safe to remove. After that when I try mount the SD Card from the setting I get the same thing in the gallery I get no SD Card Mounted and it doesnt get picked up when I turn on USB Storage on my computer. It also wont pick up SD card in Recovery, AirDroid or when trying to Download.
The main problem is that I use app2sd even though its ays I have 1.51 gig free on Internal storage I cant access the SD Card or the pictures or ROM's that are on my phone. Is there a way to fix this or just get a new SD Card
Im running Ultimod1.0 and using Data2SD v2 with A2SDRemover by Jikantaru.
Does it work when you use an sd card reader? If it does, then back up your data and reformat the partitions
Sent from my bowl of jelly!