No 3g and 4G after update - Galaxy S 4 Mini Q&A, Help & Troubleshooting

I updated my phone using oding to 4.4.2 the problem is that for some reason i cannot acces those networks it uses edge only
it tried reflashing , and didn't work ( factory reset and cache wipe also failed)
Sometimes wen i search manualy for a network it connects using 3g but it drops after a minute
its not a problem with my carrier please advise
mine is a GT -I9195 LTE

Scorpiopt said:
I updated my phone using oding to 4.4.2 the problem is that for some reason i cannot acces those networks it uses edge only
it tried reflashing , and didn't work ( factory reset and cache wipe also failed)
Sometimes wen i search manualy for a network it connects using 3g but it drops after a minute
its not a problem with my carrier please advise
mine is a GT -I9195 LTE
Click to expand...
Click to collapse
you've to flash it 2 times for that it works well, and in between the flashes you've to do a factory reset and cache wipe...
also make sure that in odin f reset time and auto reboot is ticked

Aronuser said:
you've to flash it 2 times for that it works well, and in between the flashes you've to do a factory reset and cache wipe...
also make sure that in odin f reset time and auto reboot is ticked
Click to expand...
Click to collapse
i did that still doesn't work properly

Related

No Mobile Data - Help please!

Hi All,
I got my Note 2 today, and have run into a problem already
Mobile data (HSPA+) was working when I first got the phone and used it between the shop and the way home.
When I got home, I switched over to wifi to download things.
I then flashed CWM from the cwm-root-note2.tar.md5 file in Dr Ketan's guide using PC Odin.
Then, I flashed Omega v3 via CWM.
All went without a problem.
I was still on wifi and downloading and installing all of my apps.
After a while I turned off wifi and I noticed that I wasn't getting any mobile data connection. I was getting 3 or 4 bars of mobile signal, but no 3G, H or H+ symbol to indicate mobile data.
I messaged a nearby friend on the same carrier and he said his was working fine. So, I figured I must have messed up the mobile network settings,
I checked the APN settings and they were blank, so I put them back in manually.
Still no data connection,
I went into CWM and wiped cache, dalvik and user data.
Still no good.
I downloaded the stock XXALJ1 ROM for Thailand (where I am) and flashed that, did another 3 wipes, but still no luck.
I tried doing a factory reset from the settings menu. But still no joy.
I put the SIM card into my Note 1 and it got a H+ straight away and data was working fine.(when the shop cut it down, they made a nice neat job of it, so the excess makes a decent micro sim holder). So, the network and SIM card are OK.
I noticed that when I first got the phone, the boot screen said "N7100" under "Galaxy Note II".
Now, it doesn't. I'm not sure when it changed.
I also noticed that when I do the under/factory resets, there are still some settings that aren't reset, For example, I set it to WCDMA only to see if that helped and then when I did a factory reset, it was still set like that, rather than the default "auto" that it originally comes with.
Unfortunately I didn't do a nandroid backup, as my phone came with XXALIH (without the multiscreen), so I figured I'd updated to LJ1 first.
Does anyone have any suggestions of what I can do?
Is there a full wipe ROM, or a way to reflash the bootloader and ROM?
It's 3am now, so I need to go to sleep, but this is annoying the hell out of me.
Thanks,
Rich
Carrier please?
wonsanim said:
Carrier please?
Click to expand...
Click to collapse
True Move H in Thailand.
I don't think it's a carrier issue, as I can put the SIM into my Note 1 and get H or H+ data connection straight away.
Also, I compared the APN settings and I have the exact same settings in the Note 2 and Note 1.
Mobile data was working on the Note 2 when I first got it.
Thanks,
Rich
Turn mobile data on in settings/data usage.
I doubt that his data is turned off in the settings is the problem since he already stated that he tried resetting to factory settings.
I'd suggest simply using odin to reflash J1 onto the phone and start from scratch again. This is why the devs always remind people to do a nandroid backup. In case of situations like this.
Sent from my GT-N7100 using Tapatalk 2
Thanks. Yes, Mobile data is ticked. I tried toggling that early on in case it just wasn't connecting properly or something.
I've tried flashing the stock J1 a few ties, but no joy.
It doesn't seem to do a full install, as the circle battery mod I installed previously is still there after flashing stock J1...
I'm downloading a stock XXALIE for Thailand at the moment and will try that.
It's still got 30 mins to go, and I have to leave for work soon! So, I might have to spend the day relying on wifi when I can get it
I'm wondering if the change in boot loader has anything to do with it. (Originally had "N7100" on the boot screen and now I don't, just "Galaxy Note II")
maybe APN settings are wrong? I'm from sri lanka, and I had to add an apn for mobile data to work.
OK, I finally fixed it. Here is what I did (in case anyone else has a similar problem)
Flashed stock LJ1 via odin
Downloaded Galaxy S/S2/S3 CSC
Reset my CSC to THL
Now when it restarted it picked up mobile data signal without me doing anything to the mobile network settings.
I reflashed Omega 3 and lost mobile data again. I tried the Galaxy CSC app, but it says there is only 1 CSC.
So, I went back to stock Thai LJ1.
This time I got an OTA update straight away. After that installed I noticed the boot screen had changed back to showing GT-N7100 again.
ROM is now XXALJ3 and the modem is DXALJ1
Flashed CWM and reinstalled most of my apps from Titanium Backup.
Everything is still OK.
So, it looks like I can't use Omega ROM because it changes the CSC and I can't change it back to THL.
Is there any way to install the CSC separately after flashing Omega?

[Q] Wifi Porblem for NOte 2 N-7100

Hie,
since two days suddenly started Wifi Problem for my phone till now was working good so tried the *#0011# method but its not working when i try to connect its just showing connecting then it again show saved secured network and its not getting connected and i tried soft reset and then even tried hard reset still its invain but now i suddenly noticed that when i sit within one metre range frm router i got connected but its using wifi i cannot sit near the wifi router to use it every now and then i am not able to understand is it a hardware problem or it is a software bug and even after sitting near about i feet to router it is giving me a link speed of 5MBPS previously even after being in another room i used to get 64 mbps link speed even attaching a screen shot please help me need your help .
I am from India and own a international N7100 .
That is only sofware problem ...
nilz_rokx said:
Hie,
since two days suddenly started Wifi Problem for my phone till now was working good so tried the *#0011# method but its not working when i try to connect its just showing connecting then it again show saved secured network and its not getting connected and i tried soft reset and then even tried hard reset still its invain but now i suddenly noticed that when i sit within one metre range frm router i got connected but its using wifi i cannot sit near the wifi router to use it every now and then i am not able to understand is it a hardware problem or it is a software bug and even after sitting near about i feet to router it is giving me a link speed of 5MBPS previously even after being in another room i used to get 64 mbps link speed even attaching a screen shot please help me need your help .
I am from India and own a international N7100 .
Click to expand...
Click to collapse
1st: make EFS backup (important! )
It is essentially a software issue. If you are on custom ROM, try flashing Agni Kernel (risky business). It should work.
If not, do a full data wipe / factory reset. Also format internal SD card. (Move your important stuff to external SD card and remove it for safety reasons)
Flash stock ROM via ODIN. The problem should be solved.
Press thumps up if you found this suggestion helpful.
Sent from my GT-N7100 using Tapatalk
@nilz_rokx
@nilz_rokx - have you managed to sort out wife issue?
Think mine is the same issue. Updated from 4.1.2 Jellybean to 4.4.2 Kitkat. Now wifi will not switch on. Flick switch to right only to see it flick straight back.
Didn't really want to re-flash.
Can u help me flashing My note 2 GT-N7100
ceomaverick said:
1st: make EFS backup (important! )
It is essentially a software issue. If you are on custom ROM, try flashing Agni Kernel (risky business). It should work.
If not, do a full data wipe / factory reset. Also format internal SD card. (Move your important stuff to external SD card and remove it for safety reasons)
Flash stock ROM via ODIN. The problem should be solved.
Press thumps up if you found this suggestion helpful.
Hello ,
As i never ever tried flashing nor installed custom roms in my cell was using the stock till date can u give me link for the software required and the stock firmware with which i can flash my device and get the wifi problem sort it out.
Thanks in Advance.
Click to expand...
Click to collapse
nilz_rokx said:
ceomaverick said:
1st: make EFS backup (important! )
It is essentially a software issue. If you are on custom ROM, try flashing Agni Kernel (risky business). It should work.
If not, do a full data wipe / factory reset. Also format internal SD card. (Move your important stuff to external SD card and remove it for safety reasons)
Flash stock ROM via ODIN. The problem should be solved.
Press thumps up if you found this suggestion helpful.
Hello ,
As i never ever tried flashing nor installed custom roms in my cell was using the stock till date can u give me link for the software required and the stock firmware with which i can flash my device and get the wifi problem sort it out.
Thanks in Advance.
Click to expand...
Click to collapse
1st thing: go to stock recovery and do a wipe data/ factory reset and wipe cache partition.
If problem persists, only then flash the firmware.
Download link:
http://www.sammobile.com/firmwares/download/35296/N7100XXUFNI1_N7100ODDFNI1_INU.zip/
follow the instructions on the page.
Use ODIN 3.09 to flash the 4.4.2 firmware.
Report back.
Press thumps up if you found this suggestion helpful.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse

Any way to recover a Mis-flashed Tab ?

Got a Tab 3 7.0 from a coworker he tried to flash it
im a little knowledgeable with flashing Odin ect. i cant figure out what he did
its a SM-T217S Wi-Fi will not stay on for more than a Second BT same i used a active Ting Sim it says No sim card no data
i re flashed the Original Stock JB rom no luck
Any ideas ?
Sparky the clown said:
Got a Tab 3 7.0 from a coworker he tried to flash it
im a little knowledgeable with flashing Odin ect. i cant figure out what he did
its a SM-T217S Wi-Fi will not stay on for more than a Second BT same i used a active Ting Sim it says No sim card no data
i re flashed the Original Stock JB rom no luck
Any ideas ?
Click to expand...
Click to collapse
Have you performed a factory reset or full data wipe from recovery? (flashing an Odin package does not wipe data).
Wifi and bluetooth disconnecting can sometimes be resolved by deleting the wifi and bluetooth (or bluedroid) folders located in the /data/misc directory. A factory reset will also remove those directories and allow them to be re-generated after a reboot.
There is also KitKat firmware (4.4.2) available at sammobile.com that you could download and flash through Odin.

Lost all 4G connectivity, on both operators

I've lost all 4G connectivity, on both SIMs/ operators. I've set the data limit to 300gb on both, turned on/off the auto disconnect switch, nothing helps.
I'm on latest open OP3 beta.
Any ideas?
kokesh said:
I've lost all 4G connectivity, on both SIMs/ operators. I've set the data limit to 300gb on both, turned on/off the auto disconnect switch, nothing helps.
I'm on latest open OP3 beta.
Any ideas?
Click to expand...
Click to collapse
EDIT: Are 2g, 3g call/data connections working properly?
Try reflashing the right firmware + modem.
if problem persists:
Full wipe + clean installation OB17
if problem persists:
Full wipe + clean installation OOS 4.1.3 (To make sure its not a hardware fault)
LS.xD said:
EDIT: Are 2g, 3g call/data connections working properly?
Try reflashing the right firmware + modem.
if problem persists:
Full wipe + clean installation OB17
if problem persists:
Full wipe + clean installation OOS 4.1.3 (To make sure its not a hardware fault)
Click to expand...
Click to collapse
I've solved it by doing factory reset. It felt like broken settings data. It for some reason didn't do the on off switch properly. After the reset it works again.

Question mobile network issues

it appears flashing my phone to the a546u1 model has hampered the phone's capability of connecting to a mobile network. selecting a network operator fails every time i have tried it. i've tried restarting my phone, resetting the network settings, powering it off for 30 seconds and re-inserting the sim card, and toggling airplane mode on and off. it simply does not allow selecting a network operator. do i have to restore it to the original a546u model and, if so, would a normal factory reset accomplish this or do i need to use a more complicated method?
Did you perform a factory reset when you flashed it?
The U and U1 firmware should be interchangeable, but just for the sake of stability, I would recommend performing a full data wipe when you switch from one to the other.
V0latyle said:
Did you perform a factory reset when you flashed it?
The U and U1 firmware should be interchangeable, but just for the sake of stability, I would recommend performing a full data wipe when you switch from one to the other.
Click to expand...
Click to collapse
yeah it factory reset it when it was done flashing.
should i factory reset it again on top of whatever it does after flashing?
beati_kay said:
yeah it factory reset it when it was done flashing.
should i factory reset it again on top of whatever it does after flashing?
Click to expand...
Click to collapse
Shouldn't need to but couldn't hurt

Categories

Resources