Need Stock *.pit file - Samsung Galaxy Fame

My device softbricked on boot screen, Factory reset/wipe data did not help. Please help me.

shivthink said:
My device softbricked on boot screen, Factory reset/wipe data did not help. Please help me.
Click to expand...
Click to collapse
Use odin to flash it without any lost data (it's work when you never flash custom rom before)
Download your firmwarr and lastest build at sammobil,and use odin to flash it,
How to go download mode in phonr:
Make sure your phone is off,press - button and home button and power button in same time ,and you can see the menu and the warning of it,press +
And then go to your laptop/desktop and open odin,click in ap label and chose your firmware ,after the checking click start
Sent From My Nevis

Related

[Q] I Rooted My Note 2 and had problem with bootlooping

I Rooted my samsung galaxy note 2 and then i had problem of bootlooping i cant boot to the system
i cant go to volume up+Home+Power
i can go to the safe mode
the only thing i can do is Volume Down+power+home and that doesnt help
so is there any of booting back to normal please help me with tips
Yeah there is always a way to go back to normal.
Just go to Recovery mode (Vol Up+Power+Home) and wipe data/factory reset and you'll be OK. It will clear your phone data however.
Vol up + Home + Power it doesnt work
jujuburi said:
Yeah there is always a way to go back to normal.
Just go to Recovery mode (Vol Up+Power+Home) and wipe data/factory reset and you'll be OK. It will clear your phone data however.
Click to expand...
Click to collapse
as i said i cant go to recovery mode by vol up+power+home
the only thing i can do is Vol down + power+home
sorry for this replie but i need something much better to fix my Note 2
If you can't enter recovery, then go to download mode, connect phone to pc, and flash via Odin.
MohJee said:
If you can't enter recovery, then go to download mode, connect phone to pc, and flash via Odin.
Click to expand...
Click to collapse
That's your best bet
MohJee said:
If you can't enter recovery, then go to download mode, connect phone to pc, and flash via Odin.
Click to expand...
Click to collapse
from where can i get the files ?
almullahi said:
from where can i get the files ?
Click to expand...
Click to collapse
can any one explain more becuase i am really bad
Flash back to stock rom with Odin
http://www.teamandroid.com/2012/11/...2-n7105-official-jelly-bean-stock-firmware/2/
(The firmware link provided above is for N7105 only)
You can find a list of stock ROM firmwares here:
http://samsung-updates.com/
(You have to select the correct device <N7100 or N7105>, the correct region code and the latest firmware)
Then root again using Chainfire CF Auto-Root:
http://forum.xda-developers.com/showthread.php?t=1933542
(This is the cleanest root method and best for beginners)

Prevention Information ERROR

Hi i have the following error :
When i try to click on WI-FI button comes up the following
prevention information
the device has detected an application attempting unppermitted actions and has stopped loading.To protect your device it is recomended you reboot.
I have rooted my phone using the topic here
http://forum.xda-developers.com/showthread.php?t=2258633
i had to load the
http://k0nane.info/rom/SGH-M919-UVUAMDB-k0nane.7z
file first cos i was getting an failure when installing the superuser using odin 3.0.7
my recovery is TWRP 2.5.0.0 and i am on wicked v1
Anyone else have this issue?
I had the same issue if you check the build number and the baseband version they are not the same. If you re-odin the MDL build http://k0nane.info/rom/M919UVUAMDL_M919TMBAMDL_TMB.zip again then WIFI should work again. I got it rooted after that by doing the following:
1. Load the OUDHS CWM-Based Recovery 1.0.3.3 for T-Mo GS4, via odin uncheck auto reboot and goto to recovery http://k0nane.info/rom/OUDHS-Recovery-jfltetmo-1.0.3.3.tar
2. Install Chainfire's SuperSU http://www.shabbypenguin.com/Android/Scripts/Nexus-Files/Root/SuperSU-v1.25+.zip then
3 Install [KERNEL] Stock Touchwiz MDB - SetUID Restriction Removed http://d-h.st/GcM
Between installs make sure you wipe the cache and davik cache
then you reboot you should be rooted with the newest update MDL minus the kernel lock
yes its not same the build and the baseband
Is it possible to be done using the twrp?
other recovery was little difficult?
can u send me the links i need please i just don't want to mess around and brick my phone
Thanks a lot
kaniebas said:
yes its not same the build and the baseband
Is it possible to be done using the twrp?
other recovery was little difficult?
can u send me the links i need please i just don't want to mess around and brick my phone
Thanks a lot
Click to expand...
Click to collapse
Check my post again, I couldn't get TWRP to work at first but it maybe i did not uncheck the the auto reboot box when I did that. Once the the recovery is loaded via odin you need to pull the battery then do the home-up volume-power to get into the recovery. I notice TWRP was a bit too sensitive and could not scroll down the list of folders to get to the zip files
dhonzik said:
Check my post again, I couldn't get TWRP to work at first but it maybe i did not uncheck the the auto reboot box when I did that. Once the the recovery is loaded via odin you need to pull the battery then do the home-up volume-power to get into the recovery. I notice TWRP was a bit too sensitive and could not scroll down the list of folders to get to the zip files
Click to expand...
Click to collapse
i manage to install CWM using odin and when i rooted it i install goo manager ant now i am on TWRP
I've tried installing all three recoveries using Odin, but for some reason none are working and now when I try and boot into recovery it just restarts the phone. Anyone know what I should do?
oasad92 said:
I've tried installing all three recoveries using Odin, but for some reason none are working and now when I try and boot into recovery it just restarts the phone. Anyone know what I should do?
Click to expand...
Click to collapse
You need to uncheck the auto reboot box in odin, after the recovery transfer is complete pull the battery and unplug from your computer then do a boot into recover by holding the volume up-home-power button. If not rooted follow the instructions in my post above at the very least you need to load the kernel file
dhonzik said:
You need to uncheck the auto reboot box in odin, after the recovery transfer is complete pull the battery and unplug from your computer then do a boot into recover by holding the volume up-home-power button. If not rooted follow the instructions in my post above at the very least you need to load the kernel file
Click to expand...
Click to collapse
So I did that with all 3 recoveries like 2 or 3 times each, nothing was working I unchecked reboot then would just pull battery after reboot and hold vol up and power to try and get into recovery. Sometimes the litlte blue would appear in the top left corner saying "recovery booting" and would just stay there forever other times that would appear and then the phone would just reboot itself.
Anyway finally found instructions that allowed said to try checking auto reboot and f time reset so did that with a TWRP recovery tar and then it finished and rebooted. I then shut the phone off and held power and vol up to get into recovery and it loaded fine. I was then able to flash the chainfire superuser and kernel you posted. So Thanks a bunch man!

[Q] Galaxy Gio not booting, can't recover

I tried to recover my Nandroid backup but CWM says "Can't mount /system!". I tried flashing CM but they wouldn't boot. I tried Advanced Recovery but CWM still can't mount /system. Can someone help me?
MachineShot said:
I tried to recover my Nandroid backup but CWM says "Can't mount /system!". I tried flashing CM but they wouldn't boot. I tried Advanced Recovery but CWM still can't mount /system. Can someone help me?
Click to expand...
Click to collapse
Which Rom are you using? Stock or Custom?
Custom rom
It's a custom rom. I cannot flash my stock rom for whatever reason because it doesn't boot either
MachineShot said:
It's a custom rom. I cannot flash my stock rom for whatever reason because it doesn't boot either
Click to expand...
Click to collapse
are you flashing a stock rom with ODIN or just restoring a backup?
waqaswasil said:
are you flashing a stock rom with ODIN or just restoring a backup?
Click to expand...
Click to collapse
I would like to get the stock ROM on my phone but mostly I just want to use my phone because like I said it just doesn't boot.
I am sorry i cant quite understand what you are trying to say maybe @jkoetsier can help you :good:
waqaswasil said:
I am sorry i cant quite understand what you are trying to say maybe @jkoetsier can help you :good:
Click to expand...
Click to collapse
All I want is just to be able to use my phone but it cannot boot
-Turn off your phone
-Go to download mode by holding Home+Volume Down+Power Button
- open Odin_Multi_Downloader_v4.42
- click ops and choose the Gio_v1.0.ops
- click the one package
- click one package button
- connect your phone to the computer using usb cable. wait until the odin detects your gio just look into the message at the lower left side and the - com port mapping is turn to yellow
- then click start button and wait until your gio will reboot, it can take 5-10 minutes
-after flashing go to recovery mode and wipe data/ factory reset
- REBOOT and enjoy!
https://www.dropbox.com/sh/7fruf0tmykh0ggd/FJhoY5k6TN
here are all the files you need, exept stock rom, download stockrom by yourself...
@jkoetsier I didn't expected you to reply this soon!
jkoetsier said:
-Turn off your phone
-Go to download mode by holding Home+Volume Down+Power Button
- open Odin_Multi_Downloader_v4.42
- click ops and choose the Gio_v1.0.ops
- click the one package
- click one package button
- connect your phone to the computer using usb cable. wait until the odin detects your gio just look into the message at the lower left side and the - com port mapping is turn to yellow
- then click start button and wait until your gio will reboot, it can take 5-10 minutes
-after flashing go to recovery mode and wipe data/ factory reset
- REBOOT and enjoy!
here are all the files you need, exept stock rom, download stockrom by yourself...
Click to expand...
Click to collapse
It still doesn't boot It's just stuck on the Samsung text glowing and it resets again.
Go to recovery and wipe data, factory reset and see if it works...
Sent from my GT-5660 using xda app-developers app
jkoetsier said:
Go to recovery and wipe data, factory reset and see if it works...
Sent from my GT-5660 using xda app-developers app
Click to expand...
Click to collapse
OK, actually this time it did work. I don't know how it didn't work the other times I would do it but I really want to thank you for your help
No problem, You're welcome

Samsung Galaxy tab S SM-T800 Help Pleaseeeeee

Tablet is stuck on samsung boot screen
I got it in this state not sure about history
I used odin to flash multiple firmwares (every firmware flashed successfully after rebooting it says android is updating then give this error error below)
Recovery <3e>
E:failed to verify whole-file signature
E:signature verification failed
Installation Aborted
i tried from kitkat to lollipop minimum 5 to 6 including IRON ROM
THEY ALL FLASHED BELOW ARE SOME OF THEM
CURRENTLY ON (T800XXUIBOCC)BTU
(T800XXU1BOCC)
(T800XXU1ANF8)
(T800XXU1BOE2)
(T800XXU1ANFB)
( Firmwares i used i have tested them on some demo devices they worked flawlessly )
Also tried kies IT DOWNLOADED THEN FLASHED BUT GAVE SAME ERROR
Twrp 2.8.1.0 works on my tab no further version
I cant flash zip via twrp it says no md5 found error
i am able to get into download mode can flash by odin any firmware
problem i get every time is below
recovery <3e>
E:failed to verify whole-file signature
E:signature verification failed
Installation Aborted
I have spent 2 weeks on xda forums tried many things i cant remember all of them now
any help pleaseeeee
OK the first big mistake you are making is attempting to flash firmware in stock recovery.
This is *NOT* DOWNLOAD mode.
To enter DOWNLOAD mode hold POWER +HOME +VOL DOWN(not up)
You will then see a screen asking if you wish to continue. Select continue.
Then load your stock firmware with the md5 extension into the AP tab of ODIN and flash.
It will auto reboot and take about ten minutes on the SAMSUNG loading screen to complete booting.
Flashing 100 % in download mode
ashyx said:
OK the first big mistake you are making is attempting to flash firmware in stock recovery.
This is *NOT* DOWNLOAD mode.
To enter DOWNLOAD mode hold POWER +HOME +VOL DOWN(not up)
You will then see a screen asking if you wish to continue. Select continue.
Then load your stock firmware with the md5 extension into the AP tab of ODIN and flash.
It will auto reboot and take about ten minutes on the SAMSUNG loading screen to complete booting.
Click to expand...
Click to collapse
I am flashing in download mode using power +volume down+home ( then volume up to get in download mode )
Odin add md5 then flashes 100% tablet reboot shows samsung boot screen for 5 secs then green android comes wiggling ears
A green line flashes says updating after 25 % (i assume 25 %by line going green) it goes back to start then goes again to 25 % (i assume 25 %by line going green)
Then that message
Recovery <3e>
Failed to update package
whole file e signature failed
help pleassseeee
You need to post a screen shot, I've never heard of this before.
I'd also advise you try a different cable and pc.
Will post screen shots in morning
ashyx said:
You need to post a screen shot, I've never heard of this before.
I'd also advise you try a different cable and pc.
Click to expand...
Click to collapse
I thing i would also like to mention as it clicked my mind after your 1 reply
when i press only power button to turn it on tablet sometimes goes directly to recovery without using button combo
then says no command and android thingi dies with red triangle popping from chest
wont let me post images
ashyx said:
You need to post a screen shot, I've never heard of this before.
I'd also advise you try a different cable and pc.
Click to expand...
Click to collapse
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Booting into recovery everytime
ashyx said:
You need to post a screen shot, I've never heard of this before.
I'd also advise you try a different cable and pc.
Click to expand...
Click to collapse
I am sure my tablet is going directly into recovery when i press power button
i have observed it with twrp also when i flash twrp after twrp successfully installed it shows boot screen then goes directly to twrp without button combo
i have uploaded all images on imageshack but i cant upload them
power on off
ashyx said:
You need to post a screen shot, I've never heard of this before.
I'd also advise you try a different cable and pc.
Click to expand...
Click to collapse
one more thing when i plug it for charging it shows samsung boot screen not battery charging screen
i have back cover off so i disconnected battery to power it off and checked with that also it shows samsung boot screen
even when it is power off (disconnecting battery then connecting ) connected with pc also shows samsung boot screen
by boot screen i mean the first one you see when powering on not the logo
Also your 1st reply that i am flashing firmware in recovery is leading me to conclusion that my tab is going directly into recovery after boot
Also i can email you all the photos of whole process i take photos of odin and tablet at the same time and used other pc and cable
It seems your partitions are messed up somehow. This probably happened flashing cm and why it boots to recovery.
I've seen this behaviour before.
I'd advise you to flash the stock firmware with the pit file for the t800.
You will find the pit file on this forum.
Will do and update
ashyx said:
It seems your partitions are messed up somehow. This probably happened flashing cm and why it boots to recovery.
I've seen this behaviour before.
I'd advise you to flash the stock firmware with the pit file for the t800.
You will find the pit file on this forum.
Click to expand...
Click to collapse
Thank you will do and update
Same result
ashyx said:
It seems your partitions are messed up somehow. This probably happened flashing cm and why it boots to recovery.
I've seen this behaviour before.
I'd advise you to flash the stock firmware with the pit file for the t800.
You will find the pit file on this forum.
Click to expand...
Click to collapse
Used stock with pit same result landed in recovery after flash same error
when i reboot it goes to directly to recovery after boot screen
mastjadoon said:
Used stock with pit same result landed in recovery after flash same error
when i reboot it goes to directly to recovery after boot screen
Click to expand...
Click to collapse
Ok can you try flashing my latest twrp in the dev section.
Make sure you disable auto-reboot then force reboot into recovery.
Are there any errors at all when flashing?
Twrp
ashyx said:
Ok can you try flashing my latest twrp in the dev section.
Make sure you disable auto-reboot then force reboot into recovery.
Are there any errors at all when flashing?
Click to expand...
Click to collapse
Yes will do
There are no errors in odin
Images
ashyx said:
You need to post a screen shot, I've never heard of this before.
I'd also advise you try a different cable and pc.
Click to expand...
Click to collapse
http://imageshack.com/a/img903/8343/lrKUQB.jpg
http://imageshack.com/a/img907/7663/d8EYtX.jpg
http://imageshack.com/a/img911/4048/ewVIZi.jpg
http://imageshack.com/a/img908/2148/bD3I2A.jpg
http://imageshack.com/a/img910/9052/vxv1OG.jpg
http://imageshack.com/a/img908/6008/MDTkbY.jpg
http://imageshack.com/a/img910/3480/P2MxPA.jpg
http://imageshack.com/a/img901/8369/ZYccFK.jpg
http://imageshack.com/a/img901/6032/KWbV5m.jpg
http://imageshack.com/a/img907/4011/jdDw2U.jpg
http://imageshack.com/a/img905/2626/9xMXn7.jpg
http://imageshack.com/a/img911/1065/OVwrzx.jpg
http://imageshack.com/a/img901/838/LSJ3Mw.jpg
http://imageshack.com/a/img910/7158/yNuogo.jpg
http://imageshack.com/a/img907/5787/i2Gnf6.jpg
http://imageshack.com/a/img907/7690/Ojuh6M.jpg
Twrp
ashyx said:
Ok can you try flashing my latest twrp in the dev section.
Make sure you disable auto-reboot then force reboot into recovery.
Are there any errors at all when flashing?
Click to expand...
Click to collapse
tried as advised new twrp 2.8.7.2-f2fs with auto reboot unchecked
when force rebooted into recovery if flashes on teamwin logo wont go further
OK from what I can gather from your images is that you start off with a lollipop firmware then flash an early ANFB firmware.
As far as I can remember it boots into recovery afterwards on that firmware to complete the flashing process.
However it seems it is not compatible with your model.
What region is this tablet from?
I'd forget about flashing KitKat firmware for now. Use lollipop firmware.
The first thing I suggest is to manually boot to recovery and wipe the cache partition then wipe data/factory reset.
Next is stop using ODIN 3.09 and download 3.10.7
Load the lollipop firmware correct for the device region and flash with ODIN.
If it fails after booting to recovery, wipe the cache partition again and see if it boots.
If not report back and I'll post how to get past it.
Its UK model
ashyx said:
OK from what I can gather from your images is that you start off with a lollipop firmware then flash an early ANFB firmware.
As far as I can remember it boots into recovery afterwards on that firmware to complete the flashing process.
However it seems it is not compatible with your model.
What region is this tablet from?
I'd forget about flashing KitKat firmware for now. Use lollipop firmware.
The first thing I suggest is to manually boot to recovery and wipe the cache partition then wipe data/factory reset.
Next is stop using ODIN 3.09 and download 3.10.7
Load the lollipop firmware correct for the device region and flash with ODIN.
If it fails after booting to recovery, wipe the cache partition again and see if it boots.
If not report back and I'll post how to get past it.
Click to expand...
Click to collapse
Will get back asap after following instructions
Tried with odin 3.10.7 same result
ashyx said:
OK from what I can gather from your images is that you start off with a lollipop firmware then flash an early ANFB firmware.
As far as I can remember it boots into recovery afterwards on that firmware to complete the flashing process.
However it seems it is not compatible with your model.
What region is this tablet from?
I'd forget about flashing KitKat firmware for now. Use lollipop firmware.
The first thing I suggest is to manually boot to recovery and wipe the cache partition then wipe data/factory reset.
Next is stop using ODIN 3.09 and download 3.10.7
Load the lollipop firmware correct for the device region and flash with ODIN.
If it fails after booting to recovery, wipe the cache partition again and see if it boots.
If not report back and I'll post how to get past it.
Click to expand...
Click to collapse
Flashed 2 lolipop roms 1 for uk same result
second canada same result landed in recovery after flash same error
One thing it is now not going in recovery on power button
when i press power button boot screen shows and then it goes blank
can get through button combo
mastjadoon said:
Flashed 2 lolipop roms 1 for uk same result
second canada same result landed in recovery after flash same error
One thing it is now not going in recovery on power button
when i press power button boot screen shows and then it goes blank
can get through button combo
Click to expand...
Click to collapse
It will always go to recovery after flashing as it uses recovery to complete the flashing process.
Even if it fails in recovery just wipe cache and factory reset and it should boot.
Will take about ten minutes on the SAMSUNG logo with sparks then you will see the updating message and finally boot into android.
To circumvent the device booting into recovery after flashing use 7zip and right click on the md5 file then choose open archive and highlight sboot.bin, boot.img, recovery.img and system.img.
Drag these out of the window into an empty folder.
Next highlight these four files and right click then in 7zip select 'add to archive'
Select 'tar' and make sure compression method is 'store'.
Once the process is finished you can flash the resulting tar file in AP slot of ODIN.
Will do and update asap
ashyx said:
It will always go to recovery after flashing as it uses recovery to complete the flashing process.
Even if it fails in recovery just wipe cache and factory reset and it should boot.
Will take about ten minutes on the SAMSUNG logo with sparks then you will see the updating message and finally boot into android.
To circumvent the device booting into recovery after flashing use 7zip and right click on the md5 file then choose open archive and highlight sboot.bin, boot.img, recovery.img and system.img.
Drag these out of the window into an empty folder.
Next highlight these four files and right click then in 7zip select 'add to archive'
Select 'tar' and make sure compression method is 'store'.
Once the process is finished you can flash the resulting tar file in AP slot of ODIN.
Click to expand...
Click to collapse
Just got home after work will follow your advise and will update

How to enter recovery mode?

I've followed youtube videos and other sites to enter recovery mode but all i get is an option to factory reset or to exit. I've held down the volume down and power key together until the LG logo appears and then let go of the power key after a second.
What am I doing wrong?
Thanks
mwatson said:
I've followed youtube videos and other sites to enter recovery mode but all i get is an option to factory reset or to exit. I've held down the volume down and power key together until the LG logo appears and then let go of the power key after a second.
What am I doing wrong?
Thanks
Click to expand...
Click to collapse
What android version are you running? And how did you install the recovery img? And which one? If you installed the recovery properly and want to enter via hardware buttons it's the correct procedure.
--> If you're in the LG Stock recovery (where it asks you if you want to wipe your phone) just click yes twice and you'll boot into TWRP or clockworkmod (Whatever you've installed). I know that's a dumb way but it works
Note: If you didn't install the recovery correctly you will then wipe your phone!!!
To find out if you've done everything correctly with your recovery (and if you're rooted) just use the app Quick Boot from the play store, grant permissions and reboot into recovery. If you've done everything correctly you will be in recovery mode then And you can be sure that everything is setup correctly and use the hardware button method to access recovery (Just like I told you).
Follow_and_Feel said:
What android version are you running? And how did you install the recovery img? And which one? If you installed the recovery properly and want to enter via hardware buttons it's the correct procedure.
--> If you're in the LG Stock recovery (where it asks you if you want to wipe your phone) just click yes twice and you'll boot into TWRP or clockworkmod (Whatever you've installed). I know that's a dumb way but it works
Note: If you didn't install the recovery correctly you will then wipe your phone!!!
To find out if you've done everything correctly with your recovery (and if you're rooted) just use the app Quick Boot from the play store, grant permissions and reboot into recovery. If you've done everything correctly you will be in recovery mode then And you can be sure that everything is setup correctly and use the hardware button method to access recovery (Just like I told you).
Click to expand...
Click to collapse
I'm on MM without a custom recovery., I'm hoping to just get into stock recovery and wipe cache partition. Is there even a stock recovery? Maybe factory reset yes/no is all there is?
Thanks
mwatson said:
I'm on MM without a custom recovery., I'm hoping to just get into stock recovery and wipe cache partition. Is there even a stock recovery? Maybe factory reset yes/no is all there is?
Thanks
Click to expand...
Click to collapse
Nope and yes - There's only the option to factory reset if you don't have a custom recovery installed. Sorry to bear the bad news I thought you had a custom Recovery installed and don't know how to enter it. There's no stock-like recovery to access on the G4. Sorry :crying:
EDIT: Thank me, if I answered your questions
mwatson said:
I've followed youtube videos and other sites to enter recovery mode but all i get is an option to factory reset or to exit. I've held down the volume down and power key together until the LG logo appears and then let go of the power key after a second.
What am I doing wrong?
Thanks
Click to expand...
Click to collapse
Do this, install lgup on pc, plug in usb, start lgup, let it detect on com port, click com port, ui will open, then click pbone info, it establishes avalid usb connection to phone, when it has, start adb prompt and type ' adb flash recovery (recovery image name) when done type adb reboot recovery and you're in recovery.
Just remember twrp recovery image must be in same folder as adb istalled to)
https://dl.twrp.me/h815/
on Stock MM?
spoonymoon said:
Do this, install lgup on pc, plug in usb, start lgup, let it detect on com port, click com port, ui will open, then click pbone info, it establishes avalid usb connection to phone, when it has, start adb prompt and type ' adb flash recovery (recovery image name) when done type adb reboot recovery and you're in recovery.
Just remember twrp recovery image must be in same folder as adb istalled to)
https://dl.twrp.me/h815/
Click to expand...
Click to collapse
does this work on stock MM 20A or 20B without unlocking bootloader. i'd do it even if its just temporary to wipe cache and return to stock recovery after the wipe. factory reset just is too much to start from scratch with installs and setups. i am Never Buying a LG phone ever. it was my mistake
I have an unlocked bootloader, twrp (2.8.7), root and on MM V20a, Stock.
I can boot into revocery via adb reboot bootloader / fastboot recovery boot twrp, all works fine (excecpt that I cant access the external exfat sd card with cm12/cm13 based roms).
But I cant boot with Power on /Vol down keys intoTWRP recovery.
Altough I can boot in LG factory reset menu but if I perform that it wipe indeed to facotory reset no way to reboot in recovery.
I try it a couple of time without success. Also I try differnt key combinations (Power on / Vol Up + Vol down etc.), around 15 times.
Also I cant use tools like "Quick Boot" I try 4 or 5 diverents the result is always the same - android on the back with open hatch.
When I try to boot on CM12/CM13 via Power Menu directly to recovery the same effect occurs.
Whats gos wrong? Where is my mistake?
If you flashed TWRP, the "LG Factory Reset" menu will still show up. Just confirm 2 times with yes there, and TWRP will get started . Bit confusing, I know.
MickyFoley said:
If you flashed TWRP, the "LG Factory Reset" menu will still show up. Just confirm 2 times with yes there, and TWRP will get started . Bit confusing, I know.
Click to expand...
Click to collapse
As I wrote - when I do this a factory reset is performed - no recovery.
Thats is my problem and unfortunately not the solution.
Update:
This is the solution:
http://forum.xda-developers.com/showpost.php?p=64148898&postcount=287
Follow_and_Feel said:
Nope and yes - There's only the option to factory reset if you don't have a custom recovery installed. Sorry to bear the bad news I thought you had a custom Recovery installed and don't know how to enter it. There's no stock-like recovery to access on the G4. Sorry :crying:
EDIT: Thank me, if I answered your questions
Click to expand...
Click to collapse
So there is no option to clean system cache without installing custom recovery?...

Categories

Resources