Related
friends and i mean its stucked deep!
i was running cm7 full63 nightly and some app my brother download stuck the phone.i take it in my hands flash it again with wipes and wasent working good.then i go to the cwm again.i do 4 wipes(factory-cache-davlik-battery)and go to mounds and storage and do format chace-data-system!and that was for defy the death!
it downgrade my cwm from 5.something and i have <3e> and it cant find my rom on apply sdcard;update.zip to flash it,it says ,can't mound cache;recovery/log,it cant do nothink with this cwm!!
please help if you want!thank you!!
use rsd lite to flash a stock froyo rom... start from scratch....
Sent from my MB526 using xda premium
what is rsd is this rar http://forum.xda-developers.com/showthread.php?t=1348587?and how i do it?
ok i have download this rom http://www.mediafire.com/?op47dv8yo8iypj1 and the rsd litev5.6
what steps i must do to flash the rom?
alexanter the great said:
ok i have download this rom http://www.mediafire.com/?op47dv8yo8iypj1 and the rsd litev5.6
what steps i must do to flash the rom?
Click to expand...
Click to collapse
Install RSDLite on your PC. Use WinRAR or 7zip to decompress the. gz file you downloaded (there is an sbf file inside - the clean Froyo firmware you want to flash - and save it somewhere.
Take your Defy and press the power and volume up button and release after some seconds so that you enter the bootloader mode (you see some white text on black ground).
Connect the phone via USB with your PC with RSDLite running.
In RSDLite click the button with the three dots and open the sbf file you extracted.
Hit the start button. Now it starts flashing the firmware, takes a couple of minutes.
When it's done the phone reboots and is running a Motorola Froyo firmware (not rooted or something, it can't really be called a ROM). If you want you can root, install CWM again etc and put your ROM in it again.
Almost always when your Defy is doesn't boot anymore or is somehow broken softwarewise, you can use this method to repair it.
thank you for your time.
i have done this steps,i flash this rom with rsd,root it with superoneclick,but i cant install cwm recovery with rom manager so i cant flash cyannogen again.i have found a apk (flipout system recovery)it goes me to recovery but it not working good
how i install the correct cwm recovery for intalling any roms i want?
alexanter the great said:
thank you for your time.
i have done this steps,i flash this rom with rsd,root it with superoneclick,but i cant install cwm recovery with rom manager so i cant flash cyannogen again.i have found a apk (flipout system recovery)it goes me to recovery but it not working good
how i install the correct cwm recovery for intalling any roms i want?
Click to expand...
Click to collapse
If you want the recovery menu you need to install 2ndinit. http://goo.gl/5P89P
Open the app and install the recovery menu with it, then reboot (some say it is safer to reboot even two times). You get the blue LED after powering the phone on, you have to press volume down then. There you can get to the custom recovery and wipe data, cache, install zips from SD etc.
Arjoma said:
If you want the recovery menu you need to install 2ndinit. http://goo.gl/5P89P
Open the app and install the recovery menu with it, then reboot (some say it is safer to reboot even two times). You get the blue LED after powering the phone on, you have to press volume down then. There you can get to the custom recovery and wipe data, cache, install zips from SD etc.
Click to expand...
Click to collapse
yes it worked!
thank you very much my friend you where very helpfull!danken!!
alexanter the great said:
yes it worked!
thank you very much my friend you where very helpfull!danken!!
Click to expand...
Click to collapse
danken?
Arjoma said:
danken?
Click to expand...
Click to collapse
i dont now!thanks in german!
alexanter the great said:
i dont now!thanks in german!
Click to expand...
Click to collapse
Ah, I almost thought that you meant that It should rather be "Danke"
Ορίστε, κανένα πρόβλημα! ("You're welcome, no problem" in Greek?)
its:παρακαλω κανενα προβλημα!!
i translate it for be sure and it wrote me danken, and made me curious,but i was know it is danke!Danke any way my friend!!
How to Unbrick Samsung Galaxy Gio
If your phone doesn’t boot into download mode and you have a black screen after flashing anything wrong. Here's how you unbrick it; worked for me
==Method 1:==
Prepare ODIN with the firmware you want to flash (in my case was Gingerbread 2.3.4) and get it ready to go.
-
Remove battery, wait for a bit. Insert battery again.
-
Flash a recovery with your specific filesystem (EXT4 or RFS)-(If you have EXT4, download ext4 only, don't get ext4+rfs)
-
Enter recovery & Wipe | Format:
System
Data
Cache
Dalvik Cache
Have ODIN ready. Connect phone to PC.
-
Reboot to Download Mode
Hold Volume down + Power + Home button at the same time.
-
At this point Odin should have detected your Galaxy Gio (Yellow rectangle should appear).
-
Insert the Stock Rom or Custom Rom.
-
Click Start button in Odin and wait about 5 min.
-
Reboot and wait
If all goes well it should come back to life.
If not, repeat the steps above ^ (Atleast 2x)
Download ODIN 4.42
Download OPS Only
Download DRIVER Only
==Method 2==
Here's a video using a USB Jig to Unbrick
nggabi said:
if u brick with rom manager you can use only jtag box.
Click to expand...
Click to collapse
www.jtagbox.com/
==Method 3==
You can try: One-Click UnBrick by AdamOutler
====================
Detailed procedure using ODIN HERE
==List of Stock Roms for GIO==
Password: samfirmware.com
OR
Password: sampro.pl
Recovery mode and the download does not turn on my phone is not charging will not load in this case is, this process recovers the phone with Kies was updating the brick?
thank you
Martin Riggs(Yunus) said:
Recovery mode and the download does not turn on my phone is not charging will not load in this case is, this process recovers the phone with Kies was updating the brick?
thank you
Click to expand...
Click to collapse
It was hard to understand but did you mean: "Recovery mode and download mode does not work on my phone. It's not charging in this case. Does this process unbrick the phone with kies?"
Still hard to understand what you mean, did you brick your phone when trying to install clockworkmod?
iok1 said:
It was hard to understand but did you mean: "Recovery mode and download mode does not work on my phone. It's not charging in this case. Does this process unbrick the phone with kies?"
Still hard to understand what you mean, did you brick your phone when trying to install clockworkmod?
Click to expand...
Click to collapse
No, I never turn on my phone. charge can not Kies program and installing the official 2.3.6 TUR after download article but the phone does not open
Martin Riggs(Yunus) said:
No, I never turn on my phone. charge can not Kies program and installing the official 2.3.6 TUR after download article but the phone does not open
Click to expand...
Click to collapse
Try this:
Take out battery and wait for a while. Then put it back in.
Now, again, take out battery and wait for a while. Then put it back in.
Now try Download mode
Peteragent5 said:
Try this:
Take out battery and wait for a while. Then put it back in.
Now, again, take out battery and wait for a while. Then put it back in.
Now try Download mode
Click to expand...
Click to collapse
Thank you!
but, how often the?
the exact solution?
No signs of life My Phone
Charge the phone using your charger
Sent over Electromagnetic Waves
This thread is useless without this info:
Howto brick a gio
1. Erase efs and bootloader partition
2. Have fun!
Sent from my hexacore rooted toaster with xdatoast premium
Peteragent5 said:
How to Unbrick Samsung Galaxy Gio
If your phone doesn’t boot into download mode and you have a black screen after flashing Froyo or GB here's how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.4) and get it ready to go;
Step 2 – Remove battery, SIM and SD card, next connect your Galaxy Gio to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your SG Gio ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
If all goes well it should come back to life.
If not, enter the Stock Recovery and Wipe Data and Cache, then repeat the steps above ^
For a detailed procedure using ODIN look HERE
List of Stock Roms for GIO
Grab this tool to flash the stock ROM:
ODIN Multi Downloader v4.42
OPS File: GIO_v1.0.ops
Driver: GIO_Driver
Or to Download Odin and Gio.ops only (No Driver Included) Download HERE
PS. The correct Asia Gingerbread firmware is this one:
S5660DXKT4
Password: samfirmware.com
OR
Password: sampro.pl
Click to expand...
Click to collapse
well mine its not thata bad , i did the flash with odin but it keeps restarting , start image then goes back to logo and so on , what can ido? thanks
jaibobro said:
well mine its not thata bad , i did the flash with odin but it keeps restarting , start image then goes back to logo and so on , what can ido? thanks
Click to expand...
Click to collapse
Go to recovery and wipe data/cache
Sent from my GT-S5660 using xda premium
I have done anything, but my phone has still a bootloop with every rom.
WietsedeVries said:
I have done anything, but my phone has still a bootloop with every rom.
Click to expand...
Click to collapse
That's good!
As in: your phone still has life!!
Does stock Rom work for you? Reflash it but you MUST wipe Data and Cache using the STOCK recovery before you reflash Stock!!
Remember to follow flashing instructions posted by the Dev!
Peteragent5 said:
That's good!
As in: your phone still has life!!
Does stock Rom work for you? Reflash it but you MUST wipe Data and Cache using the STOCK recovery before you reflash Stock!!
Remember to follow flashing instructions posted by the Dev!
Click to expand...
Click to collapse
I have stock now on it, but I haven't wiped Data and Cache with the stock recovery, because I use CWM. This afternoon I will try to do it with the stock recovery.
Now I have wiped everything with the stock recovery, and then I tried to install the stock rom. I still have the bootloop. I really don't understand it. It has to work...
//When I click on "test redbend fota[FS]" in the stock recovery I get this error:
-- Update from RB Fota
E:failed to mount /data (invalid argument)
E:install_fota:Can't unmount /data
Can't mount data partition ...
Installation aborted
Click to expand...
Click to collapse
any options if I can;t get into recovery, boot, and odin is stuck at downloading the first file in any .tar.md5 ?
kinda bricked my phone, odin doesn't do anything.
voetbalremco said:
any options if I can;t get into recovery, boot, and odin is stuck at downloading the first file in any .tar.md5 ?
kinda bricked my phone, odin doesn't do anything.
Click to expand...
Click to collapse
Is that tar.md5 stock rom?
lemmymet said:
Is that tar.md5 stock rom?
Click to expand...
Click to collapse
Fixed it, dont know how..
Sent from my GT-S5660 using xda premium
Take out the. md5 from the file
Fixed it already
Sent from my GT-S5660 using xda premium
I´m having the same problem. How did you solved it?
Thanx in advance
I have followed the flashing instruction via Odin through this link - http://forum.xda-developers.com/showpost.php?p=34983298&postcount=2 but I still get stock recovery. Can anybody help me please as my flash counter is increasing but still can't have the Philz recovery.
i also same problem with my note 2 lte..
veasna.kelly said:
I have followed the flashing instruction via Odin through this link - http://forum.xda-developers.com/showpost.php?p=34983298&postcount=2 but I still get stock recovery. Can anybody help me please as my flash counter is increasing but still can't have the Philz recovery.
Click to expand...
Click to collapse
Have you tried any other recoveries like twrp or the regular cwm?
Sent from my GT-N7100 using xda premium
I found out the solution. After flashing done in Odin, just force into recovery mode without letting it boot to android, then we will see the CWM recovery, select reboot phone now then select Yes to disable from stock recovery on next boot.
Hope this help other user too.
Sent from my GT-N7100 using xda premium
veasna.kelly said:
I found out the solution. After flashing done in Odin, just force into recovery mode without letting it boot to android, then we will see the CWM recovery, select reboot phone now then select Yes to disable from stock recovery on next boot.
Hope this help other user too.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
are u sure about this solution acctuly when i press volume up + home + power button my screen flashes again and again and when i leave buttons it takes me to stock not in custom recovery
i am havim the same problem...any fix?
sent from me. :]
Maybe this will help...
1. Download PhilzTouchRecovery 6.26
2. Put device into Download Mode
3. Run Odin
4. Connect device
5. Load PhilzTouchRecovery.tar.md5 to PDA Tab/Button
6. Uncheck Auto Reboot from Odin
7. Click start. Once Pass! Disconnect device.
8. Hold Power Button, DON'T RELEASE till you boot into your new recovery.
9. Once booted to PhilzRecovery, select reboot system now, select yes. to make sure not to overwrite with stock recovery or else you're PhilzRecovery will be reverted back to your stock recovery and you have to flash again your PhilzRecovery.
10. Once successfully flashed PhilzRecovery. Make all necessary backups.
11. Once fully backed up. Copy backup files to your PC.
asin_punk said:
Maybe this will help...
1. Download PhilzTouchRecovery 6.26
2. Put device into Download Mode
3. Run Odin
4. Connect device
5. Load PhilzTouchRecovery.tar.md5 to PDA Tab/Button
6. Uncheck Auto Reboot from Odin
7. Click start. Once Pass! Disconnect device.
8. Hold Power Button, DON'T RELEASE till you boot into your new recovery.
9. Once booted to PhilzRecovery, select reboot system now, select yes. to make sure not to overwrite with stock recovery or else you're PhilzRecovery will be reverted back to your stock recovery and you have to flash again your PhilzRecovery.
10. Once successfully flashed PhilzRecovery. Make all necessary backups.
11. Once fully backed up. Copy backup files to your PC.
Click to expand...
Click to collapse
thank you i will try... one question.. number 9.. i flash it again trough stock recovery?
sent from me. :]
papaver said:
thank you i will try... one question.. number 9.. i flash it again trough stock recovery?
sent from me. :]
Click to expand...
Click to collapse
No. Once you're in PhilzTouchReco you have to select reboot now. Then a question will appear, select yes. And try to boot in recovery again. You should be in PhilzTouchReco...
hmm.. the recovery doesnt show up.. when holding power button. i tried and galaxy note logo showed up 10 times or more..and nothing :/
sent from me. :]
Ya....same thing happened to me too....please....anything I could do to make it right??
some rom may flash stock recovery when reboot
Final soliution
use Odin3_v3.10.6 and try(uncheck auto reboot).
hello guys! Recently I installed a custom rom Cyanogenmod 10 for a while it worked normally but one month after normally use the battery has started to swell and i need to remove the battery, I bought another battery, put it on my galaxy w put when she did not want to load, bought a alternative loader and load the battery to 100% yet the galaxy w will not start normally, it will start to screen the ClockWorkMod and turn off again, can someone help me?
bladirangu said:
hello guys! Recently I installed a custom rom Cyanogenmod 10 for a while it worked normally but one month after normally use the battery has started to swell and i need to remove the battery, I bought another battery, put it on my galaxy w put when she did not want to load, bought a alternative loader and load the battery to 100% yet the galaxy w will not start normally, it will start to screen the ClockWorkMod and turn off again, can someone help me?
Click to expand...
Click to collapse
Did you format the /system folder in CWM upon installation?
Sent from my GT-I9195 using Tapatalk
arsradu said:
Did you format the /system folder in CWM upon installation?
Sent from my GT-I9195 using Tapatalk
Click to expand...
Click to collapse
No i only instal rom and it worked well for one month, thanks for helping me and sorry for bad english
bladirangu said:
No i only instal rom and it worked well for one month, thanks for helping me and sorry for bad english
Click to expand...
Click to collapse
Ok. As a note of advice for the future, don't just install ROMs one on top of the other. Do it clean, always, to avoid such problems.
For all ROM installations, please, follow the steps below:
First, make sure you got the ROM and the correct Gapps on your External SD Card.
After that, enter CWM and:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1, or /external_sd for older CWM versions, by mistake)
install the ROM (from the external sd)
install Gapps (from the external sd)
reboot your phone
Please, note that every step of this tutorial is mandatory!
Note: if you've got pictures/videos/documents, but NO application data (such as specific app files/settings), that you want to save, move them to a location on your External SD Card or a computer, because you're about to format the internal memory. If you want to move them back, you can do it after flashing the ROM.
Hope it helps.
arsradu said:
Ok. As a note of advice for the future, don't just install ROMs one on top of the other. Do it clean, always, to avoid such problems.
For all ROM installations, please, follow the steps below:
First, make sure you got the ROM and the correct Gapps on your External SD Card.
After that, enter CWM and:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1, or /external_sd for older CWM versions, by mistake)
install the ROM (from the external sd)
install Gapps (from the external sd)
reboot your phone
Please, note that every step of this tutorial is mandatory!
Note: if you've got pictures/videos/documents, but NO application data (such as specific app files/settings), that you want to save, move them to a location on your External SD Card or a computer, because you're about to format the internal memory. If you want to move them back, you can do it after flashing the ROM.
Hope it helps.
Click to expand...
Click to collapse
when I turn on the phone's screen CWM logo appears however the phone resets after that so I can not use CWM, I can not get into CWM
bladirangu said:
when I turn on the phone's screen CWM logo appears however the phone resets after that so I can not use CWM, I can not get into CWM
Click to expand...
Click to collapse
Is the new battery an original battery? And also, did you try to connect your phone to charger and enter CWM like this? Also, which CWM version did you install and where did you get it from (link to the thread maybe)?
arsradu said:
Is the new battery an original battery? And also, did you try to connect your phone to charger and enter CWM like this? Also, which CWM version did you install and where did you get it from?
Click to expand...
Click to collapse
yes the battery is original! yes i try to enter in CWM when charger is connect.
the version of CWM is clockwork-6.0.3.0 and i got this version in brazilian forum Called GSM fans
bladirangu said:
yes the battery is original! yes i try to enter in CWM when charger is connect.
the version of CWM is clockwork-6.0.3.0 and i got this version in brazilian forum Called GSM fans
Click to expand...
Click to collapse
Ok, please, try replacing your CWM recovery with this one here.
You can either use the tar.md5 file and flash it via ODIN (using a Windows PC) or, if you would have a working ROM, download the zip file, extract the recovery.img from it and flash it via Flashify (downloadable app from Google Play Store). Tell me if it makes any difference. The new CWM version should be 6.0.4.5.
business xinfflo
arsradu said:
Ok, please, try replacing your CWM recovery with this one here.
You can either use the tar.md5 file and flash it via ODIN (using a Windows PC) or, if you would have a working ROM, download the zip file, extract the recovery.img from it and flash it via Flashify (downloadable app from Google Play Store). Tell me if it makes any difference. The new CWM version should be 6.0.4.5.
Click to expand...
Click to collapse
I can not do this, I made a video you can take a look? sorry for the quality, as you can see, when I plug the usb he turn on and
CWM appears after that he turn off again
http://www.youtube.com/watch?v=9E7-NV8oKyU
bladirangu said:
I can not do this, I made a video you can take a look? sorry for the quality, as you can see, when I plug the usb he turn on and
CWM appears after that he turn off again
http://www.youtube.com/watch?v=9E7-NV8oKyU
Click to expand...
Click to collapse
Can you enter the DOWNLOAD mode (Turn off the phone --> then press Volume down + home + power at the same time) ?
LS.xD said:
Can you enter the DOWNLOAD mode (Turn off the phone --> then press Volume down + home + power at the same time) ?
Click to expand...
Click to collapse
Yes I can, only when i plug usb cable... I try a lot of times flash a new firmware on odin but when odin try to restart my phone it fails, the phone restarts but returns to the screen with a battery charging:crying:
bladirangu said:
Yes I can, only when i plug usb cable... I try a lot of times flash a new firmware on odin but when odin try to restart my phone it fails, the phone restarts but returns to the screen with a battery charging:crying:
Click to expand...
Click to collapse
Which Version of Odin are you using?
And just to be safe --> Have you tried a diefferent USB plug?
LS.xD said:
Which Version of Odin are you using?
Click to expand...
Click to collapse
4.43
bladirangu said:
4.43
Click to expand...
Click to collapse
I just tried it with my phone:
-Open Odin Multi
-select "Ancora.ops"
-mark "One package"
-select "recovery-clockwork-6.0.4.5-ancora.tar.md5" under "integrate package"
I tried to mark and unmark "auto reboot"
Flash process only succeeds if it autoreboots.
AND have you uninstalled samsung kies? You can manually close all kies instances and processes via task manager, but its more safe to uninstall it and only install samsung USB drivers.
This is how you did?
LS.xD said:
I just tried it with my phone:
-Open Odin Multi
-select "Ancora.ops"
-mark "One package"
-select "recovery-clockwork-6.0.4.5-ancora.tar.md5" under "integrate package"
I tried to mark and unmark "auto reboot"
Flash process only succeeds if it autoreboots.
AND have you uninstalled samsung kies? You can manually close all kies instances and processes via task manager, but its more safe to uninstall it and only install samsung USB drivers.
This is how you did?
Click to expand...
Click to collapse
i Try It again and now we have a litle change i don't know if they are good or bad news , my flash on odin run well but when odin try auto reboot the phone, the mobile screen starts flashing, as if trying to star,t and now the symbol of the CWM Disappeared
Can you still enter download mode?
If yes --> try flashing again and see if you can enter CWM pls (Volume up + Home + Power)
If no --> you can try flashing a full stock firmware via odin BUT you need the correct firmware package for your country (may be you know which firmware was installed as stock?)
bladirangu said:
I can not do this, I made a video you can take a look? sorry for the quality, as you can see, when I plug the usb he turn on and
CWM appears after that he turn off again
http://www.youtube.com/watch?v=9E7-NV8oKyU
Click to expand...
Click to collapse
Could you please, try another battery? I know you already changed it once. But just to be sure. Also, in the video, are you trying to start the phone after plugging the cable or does it automatically go into that recovery screen and then reboot?
LS.xD said:
Can you still enter download mode? If yes --> try flashing again and see if you can enter CWM pls (Volume up + Home + Power)
Click to expand...
Click to collapse
yes i enter in download mode and flash it again but i don't work , and no i can't enter in CWM and the screen keeps flashing when odin try to AutoReboot
EDIT-->
arsradu said:
Could you please, try another battery? I know you already changed it once. But just to be sure. Also, in the video, are you trying to start the phone after plugging the cable or does it automatically go into that recovery screen and then reboot?
Click to expand...
Click to collapse
ok i will buy another baterry , the phone only "start" if i plug the usb cable , if I try to turn on it without the cable connected the screen just start flashing
bladirangu said:
ok i will buy another baterry , the phone only "start" if i plug the usb cable , if I try to turn on it without the cable connected the screen just start flashing
Click to expand...
Click to collapse
Ok, please let me know what happens with the new battery. For as far as I can tell, this is not just a messed up ROM. But we'll see.
Sent from my GT-I9195 using Tapatalk
arsradu said:
Ok, please let me know what happens with the new battery. For as far as I can tell, this is not just a messed up ROM. But we'll see.
Sent from my GT-I9195 using Tapatalk
Click to expand...
Click to collapse
hello,and sorry about the delay in responding. Today I was in a shop the seller is asked to take the test with another battery, and the phone start and don't flash the screen, but as I tried to flash by odin yesterday, the android system can be corrupted, but the phone stay on, and don't flash more and stay in samsumg logo, i think u are right asradu! I have no money to buy it now, but I'll try to get back on topic as fast as possible to post news
I installed teh wrong TWRP so i tried to install a different version via odin - but now my phone just goes to teh samsung screen and doesnt boot -
I tried to go throigh this guide http://forum.xda-developers.com/showthread.php?t=2024207 but
but it didnt work I am on the n17100 which is probably why
atm just wanna get back to my stock rom -
can i install a different twrp over this one via odin ? or should I not have done that
essentially I need to install the n7100 twrp then ill be okay - but not sure how from this loop pls help
benben333 said:
I installed teh wrong TWRP so i tried to install a different version via odin - but now my phone just goes to teh samsung screen and doesnt boot -
I tried to go throigh this guide http://forum.xda-developers.com/showthread.php?t=2024207 but
but it didnt work I am on the n17100 which is probably why
atm just wanna get back to my stock rom -
can i install a different twrp over this one via odin ? or should I not have done that
essentially I need to install the n7100 twrp then ill be okay - but not sure how from this loop pls help
Click to expand...
Click to collapse
Install and try Philz Touch recovery.
Installation link: http://forum.xda-developers.com/showthread.php?t=2201860
Instrucions link: http://forum.xda-developers.com/showthread.php?t=2028103
similar issue
Hi, I don't know if I should make a separate post but I have a similar problem.
My Note 2 is stuck on the "Samsung GALAXY Note II GT-N7100" screen at boot. Only by flashing a stock ROM through ODIN can this be fixed. When I try to install a custom recovery and ROM on it, it gets stuck again at that screen.
Can anyone help me?
chinoboy said:
Hi, I don't know if I should make a separate post but I have a similar problem.
My Note 2 is stuck on the "Samsung GALAXY Note II GT-N7100" screen at boot. Only by flashing a stock ROM through ODIN can this be fixed. When I try to install a custom recovery and ROM on it, it gets stuck again at that screen.
Can anyone help me?
Click to expand...
Click to collapse
Hold down power button for 5~10 secs. after it stucks on boot logo, and try if it reboots normally.
Or press Vol. up + Menu key and then power key for 5~10 secs it'd boot your phone into recovery mode.
m.b.jikre said:
Hold down power button for 5~10 secs. after it stucks on boot logo, and try if it reboots normally.
Or press Vol. up + Menu key and then power key for 5~10 secs it'd boot your phone into recovery mode.
Click to expand...
Click to collapse
Please reread my post. It's a persistent issue. Rebooting doesn't do anything. Recovery doesn't do anything.
What you willing to do? so I can guide you through the right way.
Sent from my GT-N7100 using XDA Premium 4 mobile app
m.b.jikre said:
What you willing to do? so I can guide you through the right way.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was wondering if anyone had a similar issue to mine and how to flash a custom rom after that. The only way I've found for the phone to work was to use ODIN to flash the stock firmware on it. After that, if I try to install a custom ROM, it goes back to the SAMSUNG screen at boot.
So if you, jikre, know how to fix this issue, I'm all ears.
This method has fixed numerous problems. Might be worth a try.
http://forum.xda-developers.com/showthread.php?t=2700479
chinoboy said:
I was wondering if anyone had a similar issue to mine and how to flash a custom rom after that. The only way I've found for the phone to work was to use ODIN to flash the stock firmware on it. After that, if I try to install a custom ROM, it goes back to the SAMSUNG screen at boot.
So if you, jikre, know how to fix this issue, I'm all ears.
Click to expand...
Click to collapse
benben333 said:
I installed teh wrong TWRP so i tried to install a different version via odin - but now my phone just goes to teh samsung screen and doesnt boot -
I tried to go throigh this guide http://forum.xda-developers.com/showthread.php?t=2024207 but
but it didnt work I am on the n17100 which is probably why
atm just wanna get back to my stock rom -
can i install a different twrp over this one via odin ? or should I not have done that
essentially I need to install the n7100 twrp then ill be okay - but not sure how from this loop pls help
Click to expand...
Click to collapse
Download a stock firmware and use ODIN v3.09 to flash it onto your phone. It should work.
http://forum.xda-developers.com/showthread.php?t=2499794
chinoboy said:
I was wondering if anyone had a similar issue to mine and how to flash a custom rom after that. The only way I've found for the phone to work was to use ODIN to flash the stock firmware on it. After that, if I try to install a custom ROM, it goes back to the SAMSUNG screen at boot.
So if you, jikre, know how to fix this issue, I'm all ears.
Click to expand...
Click to collapse
>>"Hold down power button for 5~10 secs. after it stucks on boot logo, and try if it reboots normally.
Or press Vol. up + Menu key and then power key for 5~10 secs it'd boot your phone into recovery mode."<<
If you wanted to install custom rom, if so, you can't flash it through Odin (Only for flashing for Official stuff ). Download a custom rom, whichever you wanted(Copy that rom on externel SD), reboot into recovery and by selecting 'wipe data and cache' >> 'clean to install a new rom'.
Then again coming to main menu select Install zip from sd, and redirect it to rom file which you've downloaded. In any custom rom like DN3, SenSonic they've full procedure for flashing the rom, just stick to it to install it perfectly...
Any quest?
m.b.jikre said:
>>"Hold down power button for 5~10 secs. after it stucks on boot logo, and try if it reboots normally.
Or press Vol. up + Menu key and then power key for 5~10 secs it'd boot your phone into recovery mode."<<
If you wanted to install custom rom, if so, you can't flash it through Odin (Only for flashing for Official stuff ). Download a custom rom, whichever you wanted(Copy that rom on externel SD), reboot into recovery and by selecting 'wipe data and cache' >> 'clean to install a new rom'.
Then again coming to main menu select Install zip from sd, and redirect it to rom file which you've downloaded. In any custom rom like DN3, SenSonic they've full procedure for flashing the rom, just stick to it to install it perfectly...
Any quest?
Click to expand...
Click to collapse
Jikre, I've already mentioned several times I know how to flash a recovery and custom ROM. I'm saying that the phone stops working after I try to do so.
chinoboy said:
Jikre, I've already mentioned several times I know how to flash a recovery and custom ROM. I'm saying that the phone stops working after I try to do so.
Click to expand...
Click to collapse
Got you man, i'm just saying that this problem of yours is come with the Andro v4.3 and knox bootloader. First if anyone tried to install custom recovery it get stuck on bootlogo, but that is an another factor you can reboot it manually into recovery menu.
On the end when you attempt to reboot (from recovery) it asks you to disable stock recovery and you reboot your phone normally, that's it!
Sent from my GT-N7100 using XDA Premium 4 mobile app
Ah okay, that makes sense. Unfortunately that doesn't apply to my situation. I had already been on a 4.3 custom rom for several months when the phone just died like that. As of right now, I can only get it to work if I flash a stock ROM on it.
chinoboy said:
Ah okay, that makes sense. Unfortunately that doesn't apply to my situation. I had already been on a 4.3 custom rom for several months when the phone just died like that. As of right now, I can only get it to work if I flash a stock ROM on it.
Click to expand...
Click to collapse
Just try to wipe your phone from custom recovery (Not 'Clean Flash' & It may work). Have you tried to disable to recovery at end when it asks?
m.b.jikre said:
Just try to wipe your phone from custom recovery (Not 'Clean Flash' & It may work). Have you tried to disable to recovery at end when it asks?
Click to expand...
Click to collapse
I have used both CWM and TWRP recoveries. Complete wipe every time before installing a new ROM. Still doesn't work. Only wiping and installing stock firmware through ODIN would the phone start.
chinoboy said:
I have used both CWM and TWRP recoveries. Complete wipe every time before installing a new ROM. Still doesn't work. Only wiping and installing stock firmware through ODIN would the phone start.
Click to expand...
Click to collapse
Which ROM you tried to flash? Can you upload a pic of PC Odin, showing how you flash the phone. Or just enlist the options.
Try flashing your phone by philz touch ('Wipe Data & Cache >> Clean to Install a New ROM" << Maybe your previous installation troubling to set a new one, If persist again try this method):
Instruction: http://forum.xda-developers.com/showthread.php?t=2028103
Downloads: http://goo.im/devs/philz_touch/CWM_Advanced_Edition
For flshing through PC Odin: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.25.0-n7100.tar.md5 (For N7100 Only).
freezed on boot logog
i have tried all the things like wipe the data go to recovery and all but its still stuck