[Q] No Audio during calls - Galaxy Note II Q&A, Help & Troubleshooting

Hi,
I recently flashed AOSB ROM 1.3.4
After flashing, I did the usual setup and then everything was working fine.(Calls/SMS/WiFi etc.)
After usage for around 2 hours, I rebooted the phone & from then on I am not able to hear any audio during calls.
I flashed the ROM again & the same problem persists.
I have already tried below approaches.
1. After flashing & setup, everything works fine until first reboot. After which the problem persists.
2. I also tried factory reset & still it is the same. No Audio during calls after a reboot (after setup).
3. I tried with other ROM's like paranoid, slimkat etc. I am facing same problem with these as well.
Please suggest any fix.
Thanks,
Ramu

Did you do hard reset before & after instal??
Or try *#0*# (if you have samsung based ROM). Its service menu and try retriever

Yes. I did a hard reset before flashing.

Related

Please can someone help

Hi all,
Not sure if anyone can help.
I have seen loads of posts about the com.android.phone has stopped working problem but none are like what happens to my phone.
I have a rooted note 2 and running jedi x17 rom (4.1.2 based on the standard touchwiz) all works fine no problems.
I want to go to a 4.3 rom like cm/pacman/pa etc but whenever I flash the rom and reboot after 2 min the com.android.phone has stopped comes up, but only once after I reboot, everything works fine and I can get on the Internet and make calls etc, it's just annoying.
I have even gone back to unrooted stock and started again but the problem still happens, any help would be great.
I'm on the EE network in the UK, I was wondering if Apn settings could be a problem.
try after flashing to wipe cache and do a factory reset, see if that works.

[Q] dead microphone after flashing aosp rom

hi, after flashing any aosp rom (slim rom, cm, paranoid, ...) my microphone is dead. i don't hear the other caller and he can't hear me. the microphone is fine because when i flash a tw rom afterwards everything works fine again. interestingly the mic works after the first restart after the flashing. as soon as i restart for a second time the mic is dead.
it does not matter wheater i flash with clockwork mod or twrp. i always make a full wipe (cache, dalvik cache, factory reset, internal memory, rom; basically all reset options twrp offers) before installing the new rom. i install the new rom (any aosp rom) with a new kernel that fits the android number and the correct gapps. sometimes i used the old kernel but it makes no difference regarding the mic.
i don't think i make anything wrong during the process because everything else works just fine. so far i always ticked the box to restore data with my google account, can this be the problem.
any clues where i go wrong? i hope someone can help me with that problem because i love my note 2 but i hate tw.
thanks in advance.

[Q] ran into some trouble installing freeXperia on Xperia Pro

Hey, everybody.
Had some trouble recently, after a second install of CM10 FreeXperia (version 244) on my Xperia Pro phone. Suddenly, I noticed that the device won't charge when I plug it in (unless I turn off the phone), and that mobile data isn't working anymore. And I'm kinda clueless as to where to go from here. Here's the story;
I've had the device rooted for a month or so, and a few days ago decided to switch to the FreeXperia rom.
Did an install, everything worked fine. Had it running nice & smooth for 3 days, no problem whatsoever, then got an impulse to switch DPI settings. Downloaded "LCD Density Modder", set DPI to 220, and the device was now stuck at blackscreen during boot.
I decided the best option for me would be to reinstall the FreeXperia rom, get everything clean again, and start over without fussing with DPI settings. So i booted into CWM recovery, did a wipe cache, wipe data/factory reset, installed the FreeXperia 244 zip again (aswell as correct gapps), and had everything up and running again!
Atleast that's what I THOUGHT... but by evening, I discovered:
1. the phone wouldn't charge when i plugged it in.
Tried several different chargers, none works. HOWEVER, the phone recharges it's battery when i turn it off.
and,
2. mobile data isnt working, only wi-fi.
No settings changed, looked them through and couldn't find anything obvious (as far as my knowledge goes).
Making calls and sending sms still works, though.
So, I'm a bit stuck here. I'd be extremely glad if someone could give me a few pointers, or instruct me how to do a "proper" re-install (since i assume my way of re-installing things caused these problems).
Anyone got suggestions?
What I tried again now was:
1. wipe everything
2. flash new kernel
3. wipe everything
4. install rom & gapps
5. wipe everything again
However, the problem remains exactly the same.
Download the ROM.zip again, could be a problem with the zip file. Make sure you do a clean install.
僕のLT18iから送られてきた
popthosegaskets said:
Download the ROM.zip again, could be a problem with the zip file. Make sure you do a clean install.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Thanks for the tip!! managed to fix it though, through:
1. charging issue resolved itself by doing the aforementioned wipe-install-wipe procedure, and
2. internet issue was resolved by manually entering APN (it had somehow been erased).
so, we've got ourselves a happy ending, here.

[Q] Phone Ringtone Always Silent CM11

I have been looking for a solution to this problem for weeks and have found nothing that will fix it.
I am currently on CM11-M3, and have had the problem since 10.2. No matter what ringtone I select it will not play during an incoming call.
I have been testing with wheresmycellphone.com. Ehen a call comes in the phone will vibrate once and very rarely the ringtone will play for a fraction of a second, but most of the time there is no sound. I have noticed that the mute icon (speaker with a line through it) flashes in the notification area briefly the second the phone starts ringing.
Does it be behave the same way on other custom and stock ROMs?
Are you clean flashing?
audit13 said:
Does it be behave the same way on other custom and stock ROMs?
Are you clean flashing?
Click to expand...
Click to collapse
I dirty flashed 10.2 from 10.1, I did a clean install when I switched to CM11, every flash since has been with a cache/dalvik wipe. I have not yet tried a rom beyond CM.
You should try another ROM, even if it is based on CM11 to see what happens.
audit13 said:
You should try another ROM, even if it is based on CM11 to see what happens.
Click to expand...
Click to collapse
I will when I get a moment. I need to be accessible for work right now so I can't risk any excessive off time just yet.
zero|fade said:
I will when I get a moment. I need to be accessible for work right now so I can't risk any excessive off time just yet.
Click to expand...
Click to collapse
Well, I finally got off my ass to try fixing this again. I was going to try installing SlimKat, and as prep I wiped cache, dalvik and then factory reset. I rebooted to try receiving a call before I started work on flashing the rom and the phone now rings fine. I have no idea what changed, I had tried a factory reset on M2 and it didn't fix the issue. This is the first factory reset I applied to M3 though.

[Q] network problems

Hi, I have i problem with my mobile connection.
I have been using liquidsmooth v3 for a couple months without any problem. It started when i started trying 2 stockbased roms : romaur and kitslim. I wasn't able to get mobile data working even if i tried to configure it... download mms settings, choose provider... So i decided to get back to cm, aokp... I tried lots of them : carbo, pacman, aokp, aicp... new problem. at that point mobile network worked, but i was always loosing all network connection (not just data) about 30sec each couple minutes... then i decided to restore my liquidsmooth backup. It helped a little bit, but i am still loosing connection from time to time : about 30sec each 30 min...
Right now, i just reinstalled aicp 4.4.4 r2 5.0 and moshkernel as a last attemp, but it is still not working properly.
I know all this is not very clear, but i need help!!
In the process, i installed and flashed many roms, kernels and recovery...
my question actually is what could affect my mobile connection in all that? in time i installed a new rom, i wiped data and factory reset the phone.
i remember on my samsung there were modem you could flash...?
hope someone understands my problem et asks for more info..
thanks
Flashing a load of modded ROMS wont make trying to find out any easier so you need to flash a stock ftf and do a full wipe of your Phone, I'd even wipe your SD and start from scratch.

Categories

Resources