[Q] Up/downgrading with Knox - Galaxy S 4 Mini Q&A, Help & Troubleshooting

Hey guys,
I'm planning on installing CM10.2 stable on my galaxy s4 mini ( to check if the network-dropout problem i encounter sometimes still occurs)..and because i'd like CM better anyway. But before doing this i got a question about the KNOX- bootloader on my phone..
I already rooted my phone and installed CWM... the KNOX flag is triggerd 0x1.
Can i just install CM from the menu in CWM like in most descriptions ? Or is the KNOX bootloader going to give me troubles?
On another website I read this, and now i'm a little bit confused :
By downgrading from KNOX-enabled to KNOX-disabled firmware, your device will be locked to installation of newer firmwares.
Keep the above statement in mind all the time whenever you decide to flash a stock rom. Be careful not to flash a firmware that doesn't have KNOX.
CM10 probably got no KNOX right ? Am i still able to install this ROM ? And is it possible to go back to stock rom just in case i need to get it back to the shop for maintenance?
Thanks in advance.

Mascarponi said:
.
Click to expand...
Click to collapse
Short answer : Yes u can install CM 11 / 10.2 . U will have trouble to install OLDER STOCK firmware ( before Dec 2013 ones ) ( MH2, MJ7, etc will give u problems ) New ones, like ML4 , C1, D2 , etc will be ok.

SilviuMik said:
Short answer : Yes u can install CM 11 / 10.2 . U will have trouble to install OLDER STOCK firmware ( before Dec 2013 ones ) ( MH2, MJ7, etc will give u problems ) New ones, like ML4 , C1, D2 , etc will be ok.
Click to expand...
Click to collapse
Ok thanks for your answer.
Is it true that this KNOX problem only happens when installing STOCK firmware ? Or also older custom-roms ?

Mascarponi said:
Ok thanks for your answer.
Is it true that this KNOX problem only happens when installing STOCK firmware ? Or also older custom-roms ?
Click to expand...
Click to collapse
Its a problem downgrading stock roms
With cwm you can install any version of CyanogenMod at any time always keep in mind you have to full wipe when upgrade or downgrade
sent from my i9192 with CM11 by sekil

Okay thanks, will give it a try !
fburgos said:
Its a problem downgrading stock roms
With cwm you can install any version of CyanogenMod at any time always keep in mind you have to full wipe when upgrade or downgrade
sent from my i9192 with CM11 by sekil
Click to expand...
Click to collapse

Related

[Q] How to update from 4.1.2 custom rom to 4.2.2 or higher

Hi Everyone,
I do know how to flash a new rom however I had issues flashing from stock 4.1.2 to custom 4.2.2 before (device wouldn't pass the boot screen). So do I have to be on a specific 4.1.2 rom to upgrade or I need to upgrade to a stock 4.2.2 first and then upgrade to a custom one?
Please recommend a fast 4.2.2 custom rom. I would like to keep dual sim feature if possible although I know most roms only support single sim.
My current rom info:
4.1.2
Baseband: I9082XXAMC4
Thanks in advance.
adam2010 said:
Hi Everyone,
I do know how to flash a new rom however I had issues flashing from stock 4.1.2 to custom 4.2.2 before (device wouldn't pass the boot screen). So do I have to be on a specific 4.1.2 rom to upgrade or I need to upgrade to a stock 4.2.2 first and then upgrade to a custom one?
Please recommend a fast 4.2.2 custom rom. I would like to keep dual sim feature if possible although I know most roms only support single sim.
My current rom info:
4.1.2
Baseband: I9082XXAMC4
Thanks in advance.
Click to expand...
Click to collapse
simple one line if want dual sim,(stock based roms only)..u can install stock rom 4.2.2....or balliboxers GENNXT rom based on latest firmware...
NOTE: RAM USAGE OF STOCK AND STOCK BASED ROMS IS HIGH....SO LESSER MULTITASKS HANDLES!
if u can compromise with dual sim ..then u can install slimbean roms...(as u mentioned u want lightest and fastest)... but as they are small and fast, they dont have many extra feature lik halo..bt are lightweight..less ram usage...
bt i wonder why u want 4.2.2 rom when u can installl latest kitkat 4.4.2 (cm11,slimkat rom, carbon rom)..
they all are kitkat roms..........
with cm being a base rom for every rom and a light good rom...so is slimkat...and carbon with good future updates including halo features....
if u still wanna stick to 4.2.2 ....then u got slimbean rom...cm rom....(both dont have halo feature),.bt light...or u cn have PAC,resurrection remix rom(for halo multitasking)...
(gaming is better on kitkat roms)
its all ur choice....
if u want any qsns u can ..
hope i helped ..
raghavsharmaxda said:
simple one line if want dual sim,(stock based roms only)..u can install stock rom 4.2.2....or balliboxers GENNXT rom based on latest firmware...
NOTE: RAM USAGE OF STOCK AND STOCK BASED ROMS IS HIGH....SO LESSER MULTITASKS HANDLES!
if u can compromise with dual sim ..then u can install slimbean roms...(as u mentioned u want lightest and fastest)... but as they are small and fast, they dont have many extra feature lik halo..bt are lightweight..less ram usage...
bt i wonder why u want 4.2.2 rom when u can installl latest kitkat 4.4.2 (cm11,slimkat rom, carbon rom)..
they all are kitkat roms..........
with cm being a base rom for every rom and a light good rom...so is slimkat...and carbon with good future updates including halo features....
if u still wanna stick to 4.2.2 ....then u got slimbean rom...cm rom....(both dont have halo feature),.bt light...or u cn have PAC,resurrection remix rom(for halo multitasking)...
(gaming is better on kitkat roms)
its all ur choice....
if u want any qsns u can ..
hope i helped ..
Click to expand...
Click to collapse
First of all, thanks for your awesome reply
Basically I'm on stock rom without useless Samsung apps. Instructions for Pac/resurrection says I need to be on stock rom in order to upgrade to 4.2.2. So am I ok to flash their rom or first install a stock rom?
You mentioned kitkat roms are better and I agree, however based on instructions I need to be on 4.2.2 first before upgrading
Which recovery is the best for making nandroid backups? clockworkmod seems to have issues occasionally creating bad backups.
Kitkat roms seems to have app2sd enabled by default, right? and no issues with Xposed framework modules?
adam2010 said:
First of all, thanks for your awesome reply
Basically I'm on stock rom without useless Samsung apps. Instructions for Pac/resurrection says I need to be on stock rom in order to upgrade to 4.2.2. So am I ok to flash their rom or first install a stock rom?
You mentioned kitkat roms are better and I agree, however based on instructions I need to be on 4.2.2 first before upgrading
Which recovery is the best for making nandroid backups? clockworkmod seems to have issues occasionally creating bad backups.
Kitkat roms seems to have app2sd enabled by default, right? and no issues with Xposed framework modules?
Click to expand...
Click to collapse
xposed is working fine on dalvik runtime(as google introduced new runtime with 4.4 named ART ,WHICH CONSUMES LESS RAM, BUT IS UNSTABLE)...
when they say that u need to be on stock ROM 4.1.2 , they actually mean the 4.1.2 bootloader..so its okat if u are on GENNXT ROM...stock..abit modified stock 4.1.2...(they specifically mean that if u want 4.2.2 rom, be on 4.1.2 bootloader...and if u want kitkat rom..then be on 4.2.2 rom(any stock based 4.2.2 rom like gennxt or slight modifyd 4.2.2 will do , as all they need is 4.2.2 bootloader for kk roms to work)...if u want kitkat rom.....be on stock based rom..which are touchwiz based roms of 4.2.2)....
so flash 4.2.2 rom by odin..and den install kitkat...if u face any problem ....just pm me ...and ya..
always do wipe cache,dalvikcache and data(if told) , whenever u flash anything(before and after flashing)... u can ask any qsna u wanna ask..hope i helped.
raghavsharmaxda said:
xposed is working fine on dalvik runtime(as google introduced new runtime with 4.4 named ART ,WHICH CONSUMES LESS RAM, BUT IS UNSTABLE)...
when they say that u need to be on stock ROM 4.1.2 , they actually mean the 4.1.2 bootloader..so its okat if u are on GENNXT ROM...stock..abit modified stock 4.1.2...(they specifically mean that if u want 4.2.2 rom, be on 4.1.2 bootloader...and if u want kitkat rom..then be on 4.2.2 rom(any stock based 4.2.2 rom like gennxt or slight modifyd 4.2.2 will do , as all they need is 4.2.2 bootloader for kk roms to work)...if u want kitkat rom.....be on stock based rom..which are touchwiz based roms of 4.2.2)....
so flash 4.2.2 rom by odin..and den install kitkat...if u face any problem ....just pm me ...and ya..
always do wipe cache,dalvikcache and data(if told) , whenever u flash anything(before and after flashing)... u can ask any qsna u wanna ask..hope i helped.
Click to expand...
Click to collapse
one question from my side as well.
I am on stock rooted 4.1.2 rom and I want to upgrade to stock 4.2.2 rom. what would be the best method?
can I install 4.2.2 latest version by flashing via odin directly or do I need to unroot first?
or it will be automatically unrooted when I install 4.2.2(stock) latest over my 4.1.2(stock) by odin?
I hope you got my question.
Sent from my GT-I9082
Sent from my GT-I9082
IdenTT said:
one question from my side as well.
I am on stock rooted 4.1.2 rom and I want to upgrade to stock 4.2.2 rom. what would be the best method?
can I install 4.2.2 latest version by flashing via odin directly or do I need to unroot first?
or it will be automatically unrooted when I install 4.2.2(stock) latest over my 4.1.2(stock) by odin?
I hope you got my question.
Sent from my GT-I9082
Sent from my GT-I9082
Click to expand...
Click to collapse
hi
if u flash the 4.2.2 via odin the root will go and u will be on stock 4.2.2
to my knowledge u dont need to un root just flash via odin and u should be good to go any one do correct me if im wrong this is based on what i read on samsung roms im on stock 4.2.2 which came with my phone i got a week back:laugh:
haree said:
hi
if u flash the 4.2.2 via odin the root will go and u will be on stock 4.2.2
to my knowledge u dont need to un root just flash via odin and u should be good to go any one do correct me if im wrong this is based on what i read on samsung roms im on stock 4.2.2 which came with my phone i got a week back:laugh:
Click to expand...
Click to collapse
currently I am on 4.1.2 stock. can I upgrade to the latest version of 4.2.2 available on [email protected] vai odin? you seems doubtful too. I am waiting for more replies..
Sent from my GT-I9082
IdenTT said:
currently I am on 4.1.2 stock. can I upgrade to the latest version of 4.2.2 available on [email protected] vai odin? you seems doubtful too. I am waiting for more replies..
Sent from my GT-I9082
Click to expand...
Click to collapse
hi
dear in just being cautious thats all i had a samsung phone long time back and i have used odin to flash back stock rom and had no problems asuming things are the same i have given u info based on my exp right now i have a new grand and i have not rooted added CWM and i dont have exp with the grand
based on my previous exp if u know how to use the odin properly it should not be a problem
IdenTT said:
currently I am on 4.1.2 stock. can I upgrade to the latest version of 4.2.2 available on [email protected] vai odin? you seems doubtful too. I am waiting for more replies..
Sent from my GT-I9082
Click to expand...
Click to collapse
yea..u just directly flash rom via odin....using odin and flashing a firmware official removes root and any other custom recoveries......so ur phone will be unrooted...and u have to root again if u wanna do something lets say TWEAKS
Hope i helped!
there is a thread specifically by chotu222 on how to root /install firmwares.....u can go in dat section and search a bit too!
raghavsharmaxda said:
yea..u just directly flash rom via odin....using odin and flashing a firmware official removes root and any other custom recoveries......so ur phone will be unrooted...and u have to root again if u wanna do something lets say TWEAKS
Hope i helped!
there is a thread specifically by chotu222 on how to root /install firmwares.....u can go in dat section and search a bit too!
Click to expand...
Click to collapse
I finally got the chance to upgrade to stock 4.2.2 via odin and gaining root again. However I was unable to install kitkat. Even though I wiped cache and did factory reset, boot didn't pass the samsung logo. I still have 2 sim support, is it worthed to install kitkat? According to your previous instructions, I needed to be on 4.2.2 base in order to upgrade to kitkat. What would you suggest in my case
Thanks
adam2010 said:
I finally got the chance to upgrade to stock 4.2.2 via odin and gaining root again. However I was unable to install kitkat. Even though I wiped cache and did factory reset, boot didn't pass the samsung logo. I still have 2 sim support, is it worthed to install kitkat? According to your previous instructions, I needed to be on 4.2.2 base in order to upgrade to kitkat. What would you suggest in my case
Thanks
Click to expand...
Click to collapse
Bro u need to be on cwm with selinux suport..just refer to the OPs of CM 11 rom.......another thing did u format system before flashing kitkat roms...instructions are very clearly written in the respective OPs bro.......u shud be able to flash these without any issues...........
adam2010 said:
I finally got the chance to upgrade to stock 4.2.2 via odin and gaining root again. However I was unable to install kitkat. Even though I wiped cache and did factory reset, boot didn't pass the samsung logo. I still have 2 sim support, is it worthed to install kitkat? According to your previous instructions, I needed to be on 4.2.2 base in order to upgrade to kitkat. What would you suggest in my case
Thanks
Click to expand...
Click to collapse
I am a heavy gamer and performancive device addict..
Kitkat dont have any fancy samsung stuffs bro..bt its all system files are of kitkat so the gaming performance is alot increased.. All game bugs are almost fix which were in 4.2.2......there is work around for every thing..
I mean..think about it..
I never use smart stay...
I nor did use much of live wallpapers as they were battery consuming..the lock screen was fancy but still lets face truth that its just meant for security/unlocking screen ...u will have to compromise with single sim and non fancy apps ..
But it does worth a try..i mean why not ... Give it a shot and i am sure u will find something unique about it...
It got its own features..so ya...its ur wish..there are also downsides of it .....u can check respective threads and know more..
Hope i helped
Sent from my GT-I9082 using Tapatalk
raghavsharmaxda said:
I am a heavy gamer and performancive device addict..
Kitkat dont have any fancy samsung stuffs bro..bt its all system files are of kitkat so the gaming performance is alot increased.. All game bugs are almost fix which were in 4.2.2......there is work around for every thing..
I mean..think about it..
I never use smart stay...
I nor did use much of live wallpapers as they were battery consuming..the lock screen was fancy but still lets face truth that its just meant for security/unlocking screen ...u will have to compromise with single sim and non fancy apps ..
But it does worth a try..i mean why not ... Give it a shot and i am sure u will find something unique about it...
It got its own features..so ya...its ur wish..there are also downsides of it .....u can check respective threads and know more..
Hope i helped
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Ok bro, I installed selinux cmw recovery... downloaded CM11... I noticed CM is about 200mb comparing to 1 GB stock 4.2.2. Does that mean I will get more free space on internal sdcard? (out of 4GB I mean)...as others suggested, I need to do full wipe/reset factory and manually format system? and if update wasnt successful I can go back to stock via Odin right?
adam2010 said:
Ok bro, I installed selinux cmw recovery... downloaded CM11... I noticed CM is about 200mb comparing to 1 GB stock 4.2.2. Does that mean I will get more free space on internal sdcard? (out of 4GB I mean)...as others suggested, I need to do full wipe/reset factory and manually format system? and if update wasnt successful I can go back to stock via Odin right?
Click to expand...
Click to collapse
You will get a little more space than stock ROMs. And you can go back to stock via ODIN
Sent from my GT-I9082 using Tapatalk Pro
Ateekujjawal said:
You will get a little more space than stock ROMs. And you can go back to stock via ODIN
Sent from my GT-I9082 using Tapatalk Pro
Click to expand...
Click to collapse
Ok I just flashed CM successfully thanks everyone.
adam2010 said:
Ok I just flashed CM successfully thanks everyone.
Click to expand...
Click to collapse
Thanks...........
for saying Thanks, dude

[Q] Latest rom from samsung give lag experience

for the latest galaxy grand i9082 rom giving lag experience espeacially on gallery and camera..
i have few question
do you guys have any solution for that??
the lag is very obvious, and now getting worst by sometimes cant receive call, some one calling but the phone ring without screen on and hang..
i wondering if the latest update will be OTA? i heard some people say OTA only available for 3 times update, and i used 3 times..
and which stock rom is less problem? i m on malaysia stock rom now..
lastly, flashing stock rom will full wipe all photo etc??
eddie2020 said:
for the latest galaxy grand i9082 rom giving lag experience espeacially on gallery and camera..
i have few question
do you guys have any solution for that??
the lag is very obvious, and now getting worst by sometimes cant receive call, some one calling but the phone ring without screen on and hang..
i wondering if the latest update will be OTA? i heard some people say OTA only available for 3 times update, and i used 3 times..
and which stock rom is less problem? i m on malaysia stock rom now..
lastly, flashing stock rom will full wipe all photo etc??
Click to expand...
Click to collapse
take a back up all ur photos and data in any HDD or any other card / drive before going for full wipe and K3 firmware india version was good on 4.2.2.....was on K3 before moving on to kitkat.....
for gallery u can use quickpic app.......its a very good replacement application and may freeze/uninstall stock gallery if u r rooted as usual....
skpadhi79 said:
take a back up all ur photos and data in any HDD or any other card / drive before going for full wipe and K3 firmware india version was good on 4.2.2.....was on K3 before moving on to kitkat.....
for gallery u can use quickpic app.......its a very good replacement application and may freeze/uninstall stock gallery if u r rooted as usual....
Click to expand...
Click to collapse
the lagging prob cant be solve rite?
i m just wondering, the phone is malaysia firmware, if i flashed it to india version, and if the kit kat version released, will i able to get update via OTA?
eddie2020 said:
the lagging prob cant be solve rite?
i m just wondering, the phone is malaysia firmware, if i flashed it to india version, and if the kit kat version released, will i able to get update via OTA?
Click to expand...
Click to collapse
although i have never tried myself by flashing other region specific firmware ( i am from india ), but there are tons of discussions on flashing of leaked russian firmwares by many indian users..even custom roms being developed ..when 4.2.2 first hit galaxy grand.....just search a bit..has also youtube videos..
i personally prefe flashing full firmware with complete wipe and all ..whether its stock or custom roms...
so when official 4.4.2 releases if at all...then u can always download your country specific firmware from sammobile.com and flash via odin...simple...and sorry for late reply bro...
skpadhi79 said:
although i have never tried myself by flashing other region specific firmware ( i am from india ), but there are tons of discussions on flashing of leaked russian firmwares by many indian users..even custom roms being developed ..when 4.2.2 first hit galaxy grand.....just search a bit..has also youtube videos..
i personally prefe flashing full firmware with complete wipe and all ..whether its stock or custom roms...
so when official 4.4.2 releases if at all...then u can always download your country specific firmware from sammobile.com and flash via odin...simple...and sorry for late reply bro...
Click to expand...
Click to collapse
ooo , i know i lazy keep reflash and need keep backup.. and need keep reinstall.. very troublesome.... thanks for the reply...

[Q] How to update to 4.4 from 4.2.2?

Hello I would like to know how to update from 4.2.2 ( Liquid Smooth 2.9) to 4.4. Do I have to update to 4.3 with knox removed and then flash a 4.4 rom? Can I use Odin to flash a 4.3 rooted official rom directly from 4.2.2?
Sorry for my bad English
xXFl4sh said:
Hello I would like to know how to update from 4.2.2 ( Liquid Smooth 2.9) to 4.4. Do I have to update to 4.3 with knox removed and then flash a 4.4 rom? Can I use Odin to flash a 4.3 rooted official rom directly from 4.2.2?
Sorry for my bad English
Click to expand...
Click to collapse
You can just find a ROM you want to flash, read the installation instructions and flash away. If it requires you to update your bootloader, it'll tell you to do so. It might behoove you to read a few pages in the ROM thread, at least read the first and last two pages. Also pay attention to which version of cwm or twrp is recommended. Don't forget to do a nandroid in case something gets screwed up.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Confirmation

Hi,
I need a little confirmation, please
I m on .757 custom stock rom kitslim evo5 4.4.2 pre rooted with LB and dualrecovery
( thx jfxperias)
For upgrade to kitslim evo 4.4.4 I just need to :
In twrp :
Flash rom kitslim v8x 4.4.4
Flash gapps
Flash kernel 108
And enjoy ?
Thx for your time
Yes!
I had upgraded just now with this ROM
Pepecillo said:
Yes!
I had upgraded just now with this ROM
Click to expand...
Click to collapse
Thx
Fabetty said:
Hi,
I need a little confirmation, please
I m on .757 custom stock rom kitslim evo5 4.4.2 pre rooted with LB and dualrecovery
( thx jfxperias)
For upgrade to kitslim evo 4.4.4 I just need to :
In twrp :
Flash rom kitslim v8x 4.4.4
Flash gapps
Flash kernel 108
And enjoy ?
Thx for your time
Click to expand...
Click to collapse
You can do that but then your baseband will be stick to 4.4.2 ver and not optimized for 4.4.4 sometimes will lead to compatibility problem on 3G/4G or wifi connection. Baseband sometimes can even to affect the camera performance though this is rarely to happen.
You can try it first and see if any problem found on radio part. If you want to do a real flash start from the scratch then probably a lots of job you will need to do.
http://forum.xda-developers.com/showpost.php?p=54297393&postcount=5
You can follow my detailed guide but actually you don't need to follow all steps, you just need to ask flashtool to flash the baseband part.
Thx theendHK,

[Q] WIFI problem !! :( E980 at&t

Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
zohaibkhan143 said:
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
Click to expand...
Click to collapse
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
help
culot said:
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
Click to expand...
Click to collapse
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
zohaibkhan143 said:
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
Click to expand...
Click to collapse
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
help
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
Ok bro thanks for helping me
zohaibkhan143 said:
Ok bro thanks for helping me
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
zohaibkhan143 said:
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
Click to expand...
Click to collapse
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Thanks I will try it soon..!
culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
zohaibkhan143 said:
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
Click to expand...
Click to collapse
Oh, no, you misunderstood: you don't use the CWM, you only install it and then quickly install *over* it with one of Freegee's recoveries. Never use the Sphinx CWM, as you'll get errors when you go to flash roms. You only insatll the Sphinx CWM so that Freegee will recognize your device and function, it's only a stepping stone to Freegee, not a recovery you should use on its own.
And, in light of recent developments on the TWRP 2.8 front, I'd say give that a try instead. It mounts your external SD just fine. THe only things I've flashed with it are BlissPop builds and Gapps, but all without an issue yet. Go for the one with the Play theme and enjoy its gorgeous colors.
Thanks buddy.. Freegee recognized my device and installed cwm succesfully
Sent from my LG-E980 using XDA Free mobile app
help
after kitkat update now I m installed those custom roms again but still there is a same wifi problem sick off totally !

Categories

Resources