I'm seeing a whole bunch of different model numbers including here on this forum. I have a new (used) Note 8 with LTE. I'm seeing the following which I am familiar with:
N5100 - 3G
N5110- Wifi
N5120 - LTE
But I'm also seeing these two in this forum and I don't have a clue:
4.2.2 N5210 for i467M Only,,, Flashable via Odin
i467M
So what is the N5210 or is that just a mistake, and what is an i467M which is what I have?
Thanks so much for any help.
harry_fine said:
I'm seeing a whole bunch of different model numbers including here on this forum. I have a new (used) Note 8 with LTE. I'm seeing the following which I am familiar with:
N5100 - 3G
N5110- Wifi
N5120 - LTE
But I'm also seeing these two in this forum and I don't have a clue:
4.2.2 N5210 for i467M Only,,, Flashable via Odin
i467M
So what is the N5210 or is that just a mistake, and what is an i467M which is what I have?
Thanks so much for any help.
Click to expand...
Click to collapse
Along with Samsung model nu mbers (N5100...N5110...N5120) carriers also have model numbers associated with them... i467M
DizzyDen said:
Along with Samsung model nu mbers (N5100...N5110...N5120) carriers also have model numbers associated with them... i467M
Click to expand...
Click to collapse
Does that mean I can install any ROM with a 5120 designition or is there anything special abode the Canadian Rogers or Bell version?
Related
as per title?
The T prefers the 850mhz band over the 2100mhz for 3G.
Beamed from Jupiter on my Galaxy Note II
Are GT-7105 rooting mechanisms ok for GT-7105T?
Hi guys,
I'd like to root my Telstra (TEL, Australia) GT-7105T but don't want to rush ahead as CF-Auto-Root devices don't list the 'T' suffix version. I imagine it would be fine - someone has already used it successfully - but I don't want to affect the function of the radios without realising it.
Any clues?
PastaBatman said:
Hi guys,
I'd like to root my Telstra (TEL, Australia) GT-7105T but don't want to rush ahead as CF-Auto-Root devices don't list the 'T' suffix version. I imagine it would be fine - someone has already used it successfully - but I don't want to affect the function of the radios without realising it.
Any clues?
Click to expand...
Click to collapse
i also have just got 2 of telstra's 4g note 2's, im wondering how to do it as well, is there a special process due to the different version, can anyone please help.
bondmarie said:
i also have just got 2 of telstra's 4g note 2's, im wondering how to do it as well, is there a special process due to the different version, can anyone please help.
Click to expand...
Click to collapse
And I'm wondering if the CM for N7105 works on N7105T.
killsophia said:
And I'm wondering if the CM for N7105 works on N7105T.
Click to expand...
Click to collapse
I rooted my N7105T with no problem and installed the Telstra rom from the N7105 section. Phone works great. No issues at all.
I just bought the ATT Note 8.0 LTE SGH i467 and want to root it so I can remove the crap att put on it. Now looking in the root information I see it wants to know whether its an n5100 n5110. I have the ATT Note 8.0 lte which in about tells me its the SGH i467. How do I find the N number for the device? If I read correctly from the root toolkit here http://forum.xda-developers.com/showthread.php?t=2251033.
Can someone point me to the correct root procedure for this device. I have looked through these forums and am coming up blank.
TIA
I don't think anyone has found a way to root the i467 yet. The N5120 is the international note 8 with lte, but I'm not sure if selecting the 5120 in the toolkit will work for your i467.
Sent from my GT-N5100 using xda premium
Hi!
I'll watch this thread because I plan to buy one i467m from Bell and want to make sure that we will be able to root it!
Seems that it is slow to see some developements from developpers... Is it because it still too much a new product?
Had anybody been able to flash the Hong Kong T705 update to a Canadian T705? The Canadian model is SM-T705W vs SM-T705 (US and most of the world)... I haven't been able to flash ANY T705 firmware other than the Canadian firmware which is kind of old (Even the KitKat rom).
Any ideas??
EDIT: My tablet is locked, currently waiting for an unlock code. But can't seem to find any info on whether or not this will actually make a difference.
Alex338 said:
Had anybody been able to flash the Hong Kong T705 update to a Canadian T705? The Canadian model is SM-T705W vs SM-T705 (US and most of the world)... I haven't been able to flash ANY T705 firmware other than the Canadian firmware which is kind of old (Even the KitKat rom).
Any ideas??
EDIT: My tablet is locked, currently waiting for an unlock code. But can't seem to find any info on whether or not this will actually make a difference.
Click to expand...
Click to collapse
Your best bet is to sell off your Canadian version for a dirt cheap price on ebay and get an International SM-T705 version instead, as firmware updates for localized versions are usually wayy too long to wait or nonexistent.
If you have any trouble with your unlock code go to cellunlocker.net
They had me my code in two hrs and it worked first try.
No BS, no runnarround.
this is how I unlocked my T705W
Cheers!
Joe Blough said:
If you have any trouble with your unlock code go to cellunlocker.net
They had me my code in two hrs and it worked first try.
No BS, no runnarround.
this is how I unlocked my T705W
Cheers!
Click to expand...
Click to collapse
Joe... Did unlocking the tablet allow you to flash an international T705 firmware? Like the HK Lollipop update? Or are we still stuck with the KitKat 705W firmware?
Not the international one but I did flash the IronRom V1.1.5 T705. This broke my imei and gave me null/null.
The rom worked but radio did not. So I flashed back to stock and radio came back.
Joe Blough said:
Not the international one but I did flash the IronRom V1.1.5 T705. This broke my imei and gave me null/null.
The rom worked but radio did not. So I flashed back to stock and radio came back.
Click to expand...
Click to collapse
Did you try flashing the HK firmware or just the Ironman? Appreciate the replys as this is currently driving me crazy. I bought this tablet 3 weeks ago thinking I would be able to flash Lollipop, only to find out that our Canadian LTE models seem to be locked down and will probably never receive the Lollipop update...
Alex338 said:
Did you try flashing the HK firmware or just the Ironman? Appreciate the replys as this is currently driving me crazy. I bought this tablet 3 weeks ago thinking I would be able to flash Lollipop, only to find out that our Canadian LTE models seem to be locked down and will probably never receive the Lollipop update...
Click to expand...
Click to collapse
just the Ironman. Patience young grasshopper
For this device it is a bit late, but I notice curous behaviour from observed lte speeds on the SM-t705w klimtkltecan; at leatst my hardcopy of the kilmtkltecan on a t-mobile sim seems to have up/down speeds throttled at 0.5 mbps each on the ookla speed test. Another curious thing is that klimtltecan is the only klimtelte with a upgraded bootloader SW ver 2 with downgrade not possible. Another curious thing is that the kitkat modem does not beget a recognised sim (at least with upgraded lollipop bootloader). Another curous thing unique thist his post in regards to klimtltecan on xda is that it shares a mostly compatible kernel with chagallltecan (sm-t805w), whihc is reason klimtlte roms dont boot on klimtltecan. So, lots of questions there are. Most of all i can't believe the throttleing bs.
So, cna i ask what everyone's speed resutls are on this device sm-t705w klimtltecan?
thanks.
Below are teh specs fro reference.
Code:
Network/Bearer
SIM size
Micro-SIM (3FF)
Infra
3G WCDMA, 4G LTE FDD
3G UMTS
B1(2100), B2(1900), B5(850)
4G FDD LTE
B1(2100), B2(1900), B3(1800), B4(AWS), B5(850), B7(2600), B17(700), B29 (700)
http://www.samsung.com/ca/business/business-products/tablets/tablets/SM-T705WTSABMC
I bought a new AT&T Note 10+ from someone and then unlocked it. I have T-Mobile as carrier. I can use it with t-mobile for general use. But I am reading there are some features that wont work even with this generation of phones. Such as VoLTE and Video Chat and may be small other features . Also Voice mail default T-mobile app wont work either.
When I search I find many people have Flashed their phones with T-Mo firmware on Samsung unlocked devices. But i could not find any reference to T-Mo downloaded on a AT&T unlocked phone.
Any suggestions. If it is possible to wipe out AT&T from it and make it a T-Mobile operating system.
Thanks.
I have a At&t Note 10+5g and running latest update from T-mobile using Frija to find the latest firmware and Odin to flash the firmware to the phone.
Download manual samfrew.com or change csc
JAMRZ69 said:
I have a At&t Note 10+5g and running latest update from T-mobile using Frija to find the latest firmware and Odin to flash the firmware to the phone.
Click to expand...
Click to collapse
I am thinking about doing this. Just to confirm you have a galaxy note 10+ N975U from ATT and you're getting 5G through Tmobile on Band 71?
U might want check ur model numbers as n975u is not 5g.
seventyfive said:
I am thinking about doing this. Just to confirm you have a galaxy note 10+ N975U from ATT and you're getting 5G through Tmobile on Band 71?
Click to expand...
Click to collapse
No I have a Galaxy Note 10 5g model number SM-N976U and I am running latest T-mobile firmware feb.security patch ATA6 and still have 5g dont know which band but 5g is definitely there and yes it's an AT&T carrier locked phone.
FtaWolf said:
U might want check ur model numbers as n975u is not 5g.
Click to expand...
Click to collapse
It's wierd because T Mobile isn't mm wave 5G, it runs on Band 71 which e n975u supports. So I'm trying to figure out if it's possible to get 975u to do 5G on Band 71.
JAMRZ69 said:
No I have a Galaxy Note 10 5g model number SM-N976U and I am running latest T-mobile firmware feb.security patch ATA6 and still have 5g dont know which band but 5g is definitely there and yes it's an AT&T carrier locked phone.
Click to expand...
Click to collapse
Thanks for the fast reply!
You'll need to flash the combination firmware and use Realterm to change the CSC from ATT to TMB, I think I saw instructions for multi csc device changing, should work for your device as well.
---------- Post added at 06:03 AM ---------- Previous post was at 05:51 AM ----------
Try *#272*imei# to change your csc.
seventyfive said:
It's wierd because T Mobile isn't mm wave 5G, it runs on Band 71 which e n975u supports. So I'm trying to figure out if it's possible to get 975u to do 5G on Band 71
Click to expand...
Click to collapse
Tmobile uses a mix of mmwave and band n71.
And the band 71 thing is a bit more then that. They list it as band n71.. which (after reading on it) is not setup the same as band 71. Guess you can think of it like how wifi 6 works.
The n975u and n975u1 just don't have the hardware support for accessing/using band n71
I got frustrated searching for T-Mobile SM-N976U but just got AT&T unlocked SM-N976U. Thiniking of flashing T-Mobile firmware. Thank you OP for the forum, else I would have been stuck on AT&T firmware.
Install TMB on ATT N976U
JAMRZ69 said:
No I have a Galaxy Note 10 5g model number SM-N976U and I am running latest T-mobile firmware feb.security patch ATA6 and still have 5g dont know which band but 5g is definitely there and yes it's an AT&T carrier locked phone.
Click to expand...
Click to collapse
====================================================================================================================================
Please how did you get this done? I have the same AT&T Note 10+ 5G and I'm trying to install TMB firmware on it. Can you please guide me though how to do this or if there's a thread with instructions ?
So what I did chronologically is:
***TRY AT YOUR OWN RISK!! ******
Used odin (Odin3_v3.14.1_3B_PatcheD)
April 2020 Patch from T-Mobile
https://www.tmonews.com/2020/04/t-mobile-galaxy-note-10-5g-one-ui-2-1-s20-plus-ultra-update/
Downloaded SM-N976U_1_20200327132241_e87rcke8xl_fac.zip file which contains
AP_N976USQU1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT_meta_OS10.tar.md5
BL_N976USQU1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_N976USQU1BTCB_CP15495521_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OMC_OYN_N976UOYN1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OMC_OYN_N976UOYN1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
USERDATA_TMB_N976USQU1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
Flashed using Odin and used CSC.. Did pot use HOME CSC
**Phone gets wiped out**
I searched and found user @tyrone1 who listed the followings.
Phone still booted with AT&T logo..after skipping all stuffs..I wrote down my IMEI number.
used *#272*IMEI NUMBER# the screen gave me two choices
Sales code and Network Change or
Only Network Change
I chose Sales code & Network Change
Next screen I was able to select TMB.. ( It also showed different carrier)
Once I select that the phone restarted.. I popped my T-Mobile SIM in
The screen splashed with T-Mobile..
I check the video call and worked like a charm!!!
Good Luck..
ATT Locked phone to work on tmobile
visualpro said:
So what I did chronologically is:
***TRY AT YOUR OWN RISK!! ******
Used odin (Odin3_v3.14.1_3B_PatcheD)
April 2020 Patch from T-Mobile
https://www.tmonews.com/2020/04/t-mobile-galaxy-note-10-5g-one-ui-2-1-s20-plus-ultra-update/
Downloaded SM-N976U_1_20200327132241_e87rcke8xl_fac.zip file which contains
AP_N976USQU1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT_meta_OS10.tar.md5
BL_N976USQU1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_N976USQU1BTCB_CP15495521_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OMC_OYN_N976UOYN1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OMC_OYN_N976UOYN1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
USERDATA_TMB_N976USQU1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
Flashed using Odin and used CSC.. Did pot use HOME CSC
**Phone gets wiped out**
I searched and found user @tyrone1 who listed the followings.
Phone still booted with AT&T logo..after skipping all stuffs..I wrote down my IMEI number.
used *#272*IMEI NUMBER# the screen gave me two choices
Sales code and Network Change or
Only Network Change
I chose Sales code & Network Change
Next screen I was able to select TMB.. ( It also showed different carrier)
Once I select that the phone restarted.. I popped my T-Mobile SIM in
The screen splashed with T-Mobile..
I check the video call and worked like a charm!!!
Good Luck..
Click to expand...
Click to collapse
First of all, you are a gentlemen and a scholar!! all this worked
AND i like to add the following to carrier unlock your phone.
the *#272# imei # thing does work to switch back and forth from att to tmo to att.
I got att locked phone and want it to work on tmobile. A lot on swappa going for MUCH cheaper than the tmobile phone!
went here to follow link to ask att for carrier unlock code
https://www.usmobile.com/blog/how-to-unlock-your-phone-from-any-carrier/
it says you'll get the unlock code in 24-48 hours. I got it in 15 seconds. well took me longer to log in and check status!
I flashed everything per @visualpro instructions. everyhting worked except the pop...i'm on tmobile. it said invalid sim. to me that said FU, i'm carrier locked and you on tmobile. so i did the *#272 thing went back to att. rebooted and it asked me for carrier unlock code. inserted carrier unlock code that i got instantly.
it unlocked and i did the *# thing and went back to tmobile and everything is all good to go!!
This was originally a att note 10+ 5g, as you can see it's now a TMobile unit!!
That's great it all worked out!!.. My mistake that I didn't specify mine that it was already unlocked AT&T phone. That was cool when you use *#272 imei and went back and unlocked it Credit goes to user @tyrone1 for that tip!
I was simply frustrated with higher T-Mobile prices on Swappa and after searching XDA many time, got the AT&T variant. On Samsung page it would show was Galaxy Note10+ 5G 256GB (AT&T) MODEL NUMBER: SM-N976UZKAATT.. but as long I'm getting fully T-mobile features, I'm all set
visualpro said:
That's great it all worked out!!.. My mistake that I didn't specify mine that it was already unlocked AT&T phone. That was cool when you use *#272 imei and went back and unlocked it Credit goes to user @tyrone1 for that tip!
I was simply frustrated with higher T-Mobile prices on Swappa and after searching XDA many time, got the AT&T variant. On Samsung page it would show was Galaxy Note10+ 5G 256GB (AT&T) MODEL NUMBER: SM-N976UZKAATT.. but as long I'm getting fully T-mobile features, I'm all set
Click to expand...
Click to collapse
That's what I was saying too. On swappa they a premium for the tmobile version. Almost 100 bucks more. I got mine for 100 less than the cheapest tmobile one and it had 2 cases and a 512 SD card for 600 bucks. I saw the regular note 10 going for 690 lol.
Love xda!!!
Do I need to enter developer mode and enable USB debugging or anything before I do these steps with the 10 plus 5g? Also got the 10 plus non 5g can I do this to skip going to u1? Can I just flash from u att to u tmo and then do the IMEI trick or do I still need to go u1 first? Thanks
Can anyone confirm which 5G bands they have got working with this switch, also looking to bring AT&T SM-N976U over to T-Mobile.
Thanks.
I recently just bought a S20 Ultra that has a unlockable bootloader. A little while back, I had a Galaxy S9 that I could completely convert the entire device to U1. Is that even possible with this device ? To fully convert the CSC and bootloader ect, to a US model ?
cjegan2008 said:
I recently just bought a S20 Ultra that has a unlockable bootloader. A little while back, I had a Galaxy S9 that I could completely convert the entire device to U1. Is that even possible with this device ? To fully convert the CSC and bootloader ect, to a US model ?
Click to expand...
Click to collapse
That was then. Each model is specific to a region and can not be flash with software from another region. I.E you cannot flash G9880 with firmware from G988U or G988U1 or the other way around.
What exactly changed from the S9 to the S20 that made that impossible ?
west2cool said:
That was then. Each model is specific to a region and can not be flash with software from another region. I.E you cannot flash G9880 with firmware from G988U or G988U1 or the other way around.
Click to expand...
Click to collapse
cjegan2008 said:
What exactly changed from the S9 to the S20 that made that impossible ?
Click to expand...
Click to collapse
Any luck? I just got one in Canada and it only has 3g ad 4g so I was hoping I could flash a csc file.
So I attempted to edit the band config using QPST and QXDM, but I'm very unfamiliar with both programs and how to actually read and write information to the modem using those programs. Definitely not for the average user. Back in the days when devices had ESN numbers, I used to flash software using QPST and QXDM but there is a lot that has changed with those programs, and I wouldn't even know how to do that stuff today. If anyone has any knowledge about those two programs that can help me unlock all the US 5G bands for AT&T and Verizon that would extremely helpful.
dwhite011 said:
Any luck? I just got one in Canada and it only has 3g ad 4g so I was hoping I could flash a csc file.
Click to expand...
Click to collapse