I bought a new AT&T Note 10+ from someone and then unlocked it. I have T-Mobile as carrier. I can use it with t-mobile for general use. But I am reading there are some features that wont work even with this generation of phones. Such as VoLTE and Video Chat and may be small other features . Also Voice mail default T-mobile app wont work either.
When I search I find many people have Flashed their phones with T-Mo firmware on Samsung unlocked devices. But i could not find any reference to T-Mo downloaded on a AT&T unlocked phone.
Any suggestions. If it is possible to wipe out AT&T from it and make it a T-Mobile operating system.
Thanks.
I have a At&t Note 10+5g and running latest update from T-mobile using Frija to find the latest firmware and Odin to flash the firmware to the phone.
Download manual samfrew.com or change csc
JAMRZ69 said:
I have a At&t Note 10+5g and running latest update from T-mobile using Frija to find the latest firmware and Odin to flash the firmware to the phone.
Click to expand...
Click to collapse
I am thinking about doing this. Just to confirm you have a galaxy note 10+ N975U from ATT and you're getting 5G through Tmobile on Band 71?
U might want check ur model numbers as n975u is not 5g.
seventyfive said:
I am thinking about doing this. Just to confirm you have a galaxy note 10+ N975U from ATT and you're getting 5G through Tmobile on Band 71?
Click to expand...
Click to collapse
No I have a Galaxy Note 10 5g model number SM-N976U and I am running latest T-mobile firmware feb.security patch ATA6 and still have 5g dont know which band but 5g is definitely there and yes it's an AT&T carrier locked phone.
FtaWolf said:
U might want check ur model numbers as n975u is not 5g.
Click to expand...
Click to collapse
It's wierd because T Mobile isn't mm wave 5G, it runs on Band 71 which e n975u supports. So I'm trying to figure out if it's possible to get 975u to do 5G on Band 71.
JAMRZ69 said:
No I have a Galaxy Note 10 5g model number SM-N976U and I am running latest T-mobile firmware feb.security patch ATA6 and still have 5g dont know which band but 5g is definitely there and yes it's an AT&T carrier locked phone.
Click to expand...
Click to collapse
Thanks for the fast reply!
You'll need to flash the combination firmware and use Realterm to change the CSC from ATT to TMB, I think I saw instructions for multi csc device changing, should work for your device as well.
---------- Post added at 06:03 AM ---------- Previous post was at 05:51 AM ----------
Try *#272*imei# to change your csc.
seventyfive said:
It's wierd because T Mobile isn't mm wave 5G, it runs on Band 71 which e n975u supports. So I'm trying to figure out if it's possible to get 975u to do 5G on Band 71
Click to expand...
Click to collapse
Tmobile uses a mix of mmwave and band n71.
And the band 71 thing is a bit more then that. They list it as band n71.. which (after reading on it) is not setup the same as band 71. Guess you can think of it like how wifi 6 works.
The n975u and n975u1 just don't have the hardware support for accessing/using band n71
I got frustrated searching for T-Mobile SM-N976U but just got AT&T unlocked SM-N976U. Thiniking of flashing T-Mobile firmware. Thank you OP for the forum, else I would have been stuck on AT&T firmware.
Install TMB on ATT N976U
JAMRZ69 said:
No I have a Galaxy Note 10 5g model number SM-N976U and I am running latest T-mobile firmware feb.security patch ATA6 and still have 5g dont know which band but 5g is definitely there and yes it's an AT&T carrier locked phone.
Click to expand...
Click to collapse
====================================================================================================================================
Please how did you get this done? I have the same AT&T Note 10+ 5G and I'm trying to install TMB firmware on it. Can you please guide me though how to do this or if there's a thread with instructions ?
So what I did chronologically is:
***TRY AT YOUR OWN RISK!! ******
Used odin (Odin3_v3.14.1_3B_PatcheD)
April 2020 Patch from T-Mobile
https://www.tmonews.com/2020/04/t-mobile-galaxy-note-10-5g-one-ui-2-1-s20-plus-ultra-update/
Downloaded SM-N976U_1_20200327132241_e87rcke8xl_fac.zip file which contains
AP_N976USQU1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT_meta_OS10.tar.md5
BL_N976USQU1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_N976USQU1BTCB_CP15495521_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OMC_OYN_N976UOYN1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OMC_OYN_N976UOYN1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
USERDATA_TMB_N976USQU1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
Flashed using Odin and used CSC.. Did pot use HOME CSC
**Phone gets wiped out**
I searched and found user @tyrone1 who listed the followings.
Phone still booted with AT&T logo..after skipping all stuffs..I wrote down my IMEI number.
used *#272*IMEI NUMBER# the screen gave me two choices
Sales code and Network Change or
Only Network Change
I chose Sales code & Network Change
Next screen I was able to select TMB.. ( It also showed different carrier)
Once I select that the phone restarted.. I popped my T-Mobile SIM in
The screen splashed with T-Mobile..
I check the video call and worked like a charm!!!
Good Luck..
ATT Locked phone to work on tmobile
visualpro said:
So what I did chronologically is:
***TRY AT YOUR OWN RISK!! ******
Used odin (Odin3_v3.14.1_3B_PatcheD)
April 2020 Patch from T-Mobile
https://www.tmonews.com/2020/04/t-mobile-galaxy-note-10-5g-one-ui-2-1-s20-plus-ultra-update/
Downloaded SM-N976U_1_20200327132241_e87rcke8xl_fac.zip file which contains
AP_N976USQU1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT_meta_OS10.tar.md5
BL_N976USQU1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_N976USQU1BTCB_CP15495521_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OMC_OYN_N976UOYN1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OMC_OYN_N976UOYN1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
USERDATA_TMB_N976USQU1BTCB_CL18243390_QB30093623_REV00_user_low_ship_MULTI_CERT.tar.md5
Flashed using Odin and used CSC.. Did pot use HOME CSC
**Phone gets wiped out**
I searched and found user @tyrone1 who listed the followings.
Phone still booted with AT&T logo..after skipping all stuffs..I wrote down my IMEI number.
used *#272*IMEI NUMBER# the screen gave me two choices
Sales code and Network Change or
Only Network Change
I chose Sales code & Network Change
Next screen I was able to select TMB.. ( It also showed different carrier)
Once I select that the phone restarted.. I popped my T-Mobile SIM in
The screen splashed with T-Mobile..
I check the video call and worked like a charm!!!
Good Luck..
Click to expand...
Click to collapse
First of all, you are a gentlemen and a scholar!! all this worked
AND i like to add the following to carrier unlock your phone.
the *#272# imei # thing does work to switch back and forth from att to tmo to att.
I got att locked phone and want it to work on tmobile. A lot on swappa going for MUCH cheaper than the tmobile phone!
went here to follow link to ask att for carrier unlock code
https://www.usmobile.com/blog/how-to-unlock-your-phone-from-any-carrier/
it says you'll get the unlock code in 24-48 hours. I got it in 15 seconds. well took me longer to log in and check status!
I flashed everything per @visualpro instructions. everyhting worked except the pop...i'm on tmobile. it said invalid sim. to me that said FU, i'm carrier locked and you on tmobile. so i did the *#272 thing went back to att. rebooted and it asked me for carrier unlock code. inserted carrier unlock code that i got instantly.
it unlocked and i did the *# thing and went back to tmobile and everything is all good to go!!
This was originally a att note 10+ 5g, as you can see it's now a TMobile unit!!
That's great it all worked out!!.. My mistake that I didn't specify mine that it was already unlocked AT&T phone. That was cool when you use *#272 imei and went back and unlocked it Credit goes to user @tyrone1 for that tip!
I was simply frustrated with higher T-Mobile prices on Swappa and after searching XDA many time, got the AT&T variant. On Samsung page it would show was Galaxy Note10+ 5G 256GB (AT&T) MODEL NUMBER: SM-N976UZKAATT.. but as long I'm getting fully T-mobile features, I'm all set
visualpro said:
That's great it all worked out!!.. My mistake that I didn't specify mine that it was already unlocked AT&T phone. That was cool when you use *#272 imei and went back and unlocked it Credit goes to user @tyrone1 for that tip!
I was simply frustrated with higher T-Mobile prices on Swappa and after searching XDA many time, got the AT&T variant. On Samsung page it would show was Galaxy Note10+ 5G 256GB (AT&T) MODEL NUMBER: SM-N976UZKAATT.. but as long I'm getting fully T-mobile features, I'm all set
Click to expand...
Click to collapse
That's what I was saying too. On swappa they a premium for the tmobile version. Almost 100 bucks more. I got mine for 100 less than the cheapest tmobile one and it had 2 cases and a 512 SD card for 600 bucks. I saw the regular note 10 going for 690 lol.
Love xda!!!
Do I need to enter developer mode and enable USB debugging or anything before I do these steps with the 10 plus 5g? Also got the 10 plus non 5g can I do this to skip going to u1? Can I just flash from u att to u tmo and then do the IMEI trick or do I still need to go u1 first? Thanks
Can anyone confirm which 5G bands they have got working with this switch, also looking to bring AT&T SM-N976U over to T-Mobile.
Thanks.
Related
I live in Canada and have a N975W and want to flash the star wars U1 firmware, but before I do I wanna know what happens when you put a Canadian Carrier sim in?!? Will the U1 CSC have Canadian Carrier info preset? Will I have to manually modify to get things like MMS to work? Or does the U1 firmware have Canadian stuff preloaded that gets triggered with the Sim card?
Thanks
Nobody?
Exynos
rmanaudio16 said:
I live in Canada and have a N975W and want to flash the star wars U1 firmware, but before I do I wanna know what happens when you put a Canadian Carrier sim in?!? Will the U1 CSC have Canadian Carrier info preset? Will I have to manually modify to get things like MMS to work? Or does the U1 firmware have Canadian stuff preloaded that gets triggered with the Sim card?
Thanks
Click to expand...
Click to collapse
If u have exynos model of note 10 plus like me then u can flash the firmware that I have flashed starwars edition.
zaibjan said:
If u have exynos model of note 10 plus like me then u can flash the firmware that I have flashed starwars edition.
Click to expand...
Click to collapse
I've got a Snapdragon, same hardware as USA
rmanaudio16 said:
I've got a Snapdragon, same hardware as USA
Click to expand...
Click to collapse
I think then u can flash as I have totally different csc
Now from the first just remember to do that whith already inserted sim into your phone so it can instantly fetch the settings of your sim carrier .
rmanaudio16 said:
I live in Canada and have a N975W and want to flash the star wars U1 firmware, but before I do I wanna know what happens when you put a Canadian Carrier sim in?!? Will the U1 CSC have Canadian Carrier info preset? Will I have to manually modify to get things like MMS to work? Or does the U1 firmware have Canadian stuff preloaded that gets triggered with the Sim card?
Thanks
Click to expand...
Click to collapse
The American CSC does not contain information for Canadian carriers. After you flash the American U1 firmware, flash the Canadian CSC. There is only one CSC for Canada, and it contains information for all the Canadian carriers (Bell, Rogers, Telus, etc.). After flashing the Canadian CSC, when you insert a SIM from a Canadian carrier it applies the settings for your carrier's VoLTE, wi-fi calling, APN, etc.
If you flash Canadian CSC after flashing full U1 firmware will it not effect the U1 firmware? The CSC file is so large I'm wondering how it will effect the U1 firmware. Anyone do this yet? Do I need to use modified Odin?
Have you done this? Does flashing a different CSC effect the firmware?
---------- Post added at 11:58 AM ---------- Previous post was at 11:57 AM ----------
I would appreciate any input from someone who has tried this please. I really want to flash the star wars Android 10 for U1 on my 975W but am afraid that CSC will be different and not sure If flashing CSC from a different firmware will work as the file is so big.
if it doesnt work, you just flash back to stock firmware and csc.
just make sure its for the same processor.
OK, so, I flashed first Star Wars Android 9 version of U1 firmware to test and it works perfectly. Booted up with Canadian carrier sim and it loaded all APN settings. Everything works perfectly.
Flashed Android 10 version of Star Wars U1 firmware and its all good.
So you can load U1 firmware on N975W unlocked version. Same hardware and works in both countries. Do not even need Canadian CSC.
Do not load the HOME CSC file. It will wipe everything but its worth it. Firmware is solid and beautiful.
By flashing unlocked firmware, did you get rid of any carrier bloatware?
Can I ask you guys an info? I own N975u1, on first boot It haven't Greek language and I choose it later at setting. Does N975w on first boot has Greek language? So I install N975w firmware to solve my problem?(some settings remains in English).
975W is Canadian model and i have it on my note 10+ with carrier esk or eastlink if you wish to know what carrier esk stands for. If you are trying to get your phone to show Greek language I do not believe the 975w firmware would be a good choice. It lets you select which country you are from when you start up a freshly formatted phone but I have never selected any language other than Canada which is English. Just thought I would let you know that my model is also a Snapdragon chipset and I don't know if you can Flash another firmware unless you unlock Bootloader and I do not know if that is possible currently on a Snapdragon chipset Note 10.
TWiiTCH said:
975W is Canadian model and i have it on my note 10+ with carrier esk or eastlink if you wish to know what carrier esk stands for. If you are trying to get your phone to show Greek language I do not believe the 975w firmware would be a good choice. It lets you select which country you are from when you start up a freshly formatted phone but I have never selected any language other than Canada which is English. Just thought I would let you know that my model is also a Snapdragon chipset and I don't know if you can Flash another firmware unless you unlock Bootloader and I do not know if that is possible currently on a Snapdragon chipset Note 10.
Click to expand...
Click to collapse
I have n975w snapdragon with Virgin mobile. I can't access my oem unlock. Is there a firmware I can flash that will give me access while maintaining my plan with virgin?
Sudosuperman said:
I have n975w snapdragon with Virgin mobile. I can't access my oem unlock. Is there a firmware I can flash that will give me access while maintaining my plan with virgin?
Click to expand...
Click to collapse
The only phones with an unlockable bootloader are the N9750 (chineese variant) and Exynos models.
Can you please be more specific with what you are looking for within regards to firmware. Other then the information/answers posted in the first page of this thread I saw this thread, but depending on what your looking for specifically the post may not be of any help.
Also be aware that if you want to retain full compatibility with Virgin then you shouldn't go messing around with the firmware. Flashing other firmware (especially for US models) can result in things not working the way they would normally.
scottusa2008 said:
The only phones with an unlockable bootloader are the N9750 (chineese variant) and Exynos models.
Can you please be more specific with what you are looking for within regards to firmware. Other then the information/answers posted in the first page of this thread I saw this thread, but depending on what your looking for specifically the post may not be of any help.
Also be aware that if you want to retain full compatibility with Virgin then you shouldn't go messing around with the firmware. Flashing other firmware (especially for US models) can result in things not working the way they would normally.
Click to expand...
Click to collapse
OK, so only the exynos version of my phone is oem unlockable? I am just trying to be able to root my phone, i figured if I could flash an oem unlocked firmware while keeping my carrier then I would be able to do so.
Sudosuperman said:
OK, so only the exynos version of my phone is oem unlockable? I am just trying to be able to root my phone, i figured if I could flash an oem unlocked firmware while keeping my carrier then I would be able to do so.
Click to expand...
Click to collapse
Correct.
Only the models with the exynos chipset and the N9750 variant can be rooted.
Sudosuperman said:
I have n975w snapdragon with Virgin mobile. I can't access my oem unlock. Is there a firmware I can flash that will give me access while maintaining my plan with virgin?
Click to expand...
Click to collapse
Only firmware for OEM UNLOCK switch in developer menu is exynos models. I found other sites on the net stating SM-N975W Snapdragon can be bootloader unlocked but i tried them all and none worked. DO NOT flash exynos firmware on Snapdragon model as you may ruin your phone or void warranty. Luckily mine still shows official and knox counter didn't get tripped. Sorry, wish I had better news 4 ya.
TWiiTCH said:
Only firmware for OEM UNLOCK switch in developer menu is exynos models. I found other sites on the net stating SM-N975W Snapdragon can be bootloader unlocked but i tried them all and none worked. DO NOT flash exynos firmware on Snapdragon model as you may ruin your phone or void warranty. Luckily mine still shows official and knox counter didn't get tripped. Sorry, wish I had better news 4 ya.
Click to expand...
Click to collapse
Respect. I've accepted that my phone can't be rooted. Gunna buy a nexus 7 with kali nethunter pre installed to save the hassle XD THANKS FOR THE HELP!!!
I recently obtained a Samsung S20+ SM-G9860. However, I am in the US and am intending to flash the AT&T firmware for the SM-G986U. When I try to do this, I get a secure check fail on the PIT file due to the differing model. Is there a way to circumvent this? The two models have identical hardware from what I can see.
Is it possible to do this, and what is the process for doing this if it is indeed possible?
You cannot flash a rom built for a snapdragon chipset on a phone with a exynos chipset
Be thankful there is that safety check built in. Lol
Sent from my SM-G988U1 using Tapatalk
tdevaughn said:
You cannot flash a rom built for a snapdragon chipset on a phone with a exynos chipset
Be thankful there is that safety check built in. Lol
Sent from my SM-G988U1 using Tapatalk
Click to expand...
Click to collapse
It's not Exynos, it's also a Snapdragon.
Oh, the Brazil variant. Still dont think it will work. They might be dual sim
Sent from my SM-G988U1 using Tapatalk
tdevaughn said:
Oh, the Brazil variant. Still dont think it will work. They might be dual sim
Sent from my SM-G988U1 using Tapatalk
Click to expand...
Click to collapse
It's the Hong Kong variant. It does appear to be a dual SIM, however.
YES PLEASE!! I need to change my S20+ Snapdragon SM-G986U firmware to SM-9860 too!!!
Sanctanimus said:
I recently obtained a Samsung S20+ SM-G9860. However, I am in the US and am intending to flash the AT&T firmware for the SM-G986U. When I try to do this, I get a secure check fail on the PIT file due to the differing model. Is there a way to circumvent this? The two models have identical hardware from what I can see.
Is it possible to do this, and what is the process for doing this if it is indeed possible?
Click to expand...
Click to collapse
YES PLEASE!! I need to change my S20+ Snapdragon SM-G986U firmware to Hong Kong SM-9860 firmware too! Any help please Samsung S20+ Snapdragons masters?!! :crying:
Sanctanimus said:
I recently obtained a Samsung S20+ SM-G9860. However, I am in the US and am intending to flash the AT&T firmware for the SM-G986U. When I try to do this, I get a secure check fail on the PIT file due to the differing model. Is there a way to circumvent this? The two models have identical hardware from what I can see.
Is it possible to do this, and what is the process for doing this if it is indeed possible?
Click to expand...
Click to collapse
The hardware isn't identical, SM-G986U is a Single SIM Device, your's is a Dual SIM.. TGY is the CSC in your device and even if you could flash SM-G986U Firmware the CSC would not change, it will still be TGY. If you're looking to get full AT&T call functionality on your device it's not possible as the CSC doesn't support AT&T compatibility. Firmware is CSC specific as well.
varcor said:
The hardware isn't identical, SM-G986U is a Single SIM Device, your's is a Dual SIM.. TGY is the CSC in your device and even if you could flash SM-G986U Firmware the CSC would not change, it will still be TGY. If you're looking to get full AT&T call functionality on your device it's not possible as the CSC doesn't support AT&T compatibility. Firmware is CSC specific as well.
Click to expand...
Click to collapse
But mine has two IMEI numbers though 1 for physical and another for esim, HOWEVER the esim option to add another QR code for another network is not visible. Its like the device is locked for VERIZON esim use only.
Oh well, guess gotta wait for another few month for newer updates to be able to use another network esim or firmware flashing that can enable this option soon...
x88888x said:
But mine has two IMEI numbers though 1 for physical and another for esim, HOWEVER the esim option to add another QR code for another network is not visible. Its like the device is locked for VERIZON esim use only.
Oh well, guess gotta wait for another few month for newer updates to be able to use another network esim or firmware flashing that can enable this option soon...
Click to expand...
Click to collapse
If your device is the SM-G986U it's a Single SIM Device which doesn't at this point doesn't support eSim. Does the SIM Management Screen actually display the word "eSim"? Share a photo please. The device is likely still locked by Verizon. What is your motivation to change the Firmware to SM-G9860, do you live in Hong Kong?
Im sorry unfortunately I cant post links for my screenshots or upload any pictures..
If your device is the SM-G986U it's a Single SIM Device which doesn't at this point doesn't support eSim. Does the SIM Management Screen actually display the word "eSim"? Share a photo please. The device is likely still locked by Verizon. What is your motivation to change the Firmware to SM-G9860, do you live in Hong Kong?[/QUOTE]
I bought my phone online.. When I start up my phone it says Verizon, but its unlocked though because I can use any country physical simcard. Like right now im using my local simcard in Malaysia. I live in Malaysia and the reason I want to flash rom my SM-G986U device to Hong Kong firmware is so that I can use any eSim network in my country for my other network phone number.... If its a software for eSim that I can get for firmware that will be very helpful. Because the main local Malaysian samsung s20+ 5G firmware model is base on Exynos 990 which I doubt will fit for my US phone model..
I don't think you can flash SM-9860 Firmware onto your device but even if you could you still won't have eSim capability. Mix and matching firmware typically has more success on Exynos International Variants since they are Multi-CSC Enabled Devices. So if you have a British CSC (VOD) you may have success flashing German Firmware (VD2) since both CSC's are already stored in the device however even then some call features may not work. Snapdragon Devices don't have Multi-CSC's and as mentioned previously the Firmware is CSC Specific, they're made for one another. IF you had an Unlocked Bootloader, which you don't, there may be a method to modify the CSC once you root the device.. I did follow a thread a couple of years back where a gal had some success modifying her CSC on a Snapdragon Device but I believe that was a Galaxy S8. Also, I'm still curious if the word "eSim" actually appears in the SIM Management Screen on your device.
varcor said:
I don't think you can flash SM-9860 Firmware onto your device but even if you could you still won't have eSim capability. Mix and matching firmware typically has more success on Exynos International Variants since they are Multi-CSC Enabled Devices. So if you have a British CSC (VOD) you may have success flashing German Firmware (VD2) since both CSC's are already stored in the device however even then some call features may not work. Snapdragon Devices don't have Multi-CSC's and as mentioned previously the Firmware is CSC Specific, they're made for one another. IF you had an Unlocked Bootloader, which you don't, there may be a method to modify the CSC once you root the device.. I did follow a thread a couple of years back where a gal had some success modifying her CSC on a Snapdragon Device but I believe that was a Galaxy S8. Also, I'm still curious if the word "eSim" actually appears in the SIM Management Screen on your device.
Click to expand...
Click to collapse
Damn.. that is some nice insights.. I read a thread somewhere too that US SM-G986U cannot and will not be able to enable its OEM or unlocked bootloader.. the eSim actually doesnt appear in the Sim Management Screen on my device. I really want to upload some links of the screenshot but for now I cant do anything as Im a new member.. I just have to wait for the network shop to open up to change my current esim card to physical simcard.. its been 2 months plus of this coronavirus lockdown and our network providers cant do much about it too..
Anyways I really appreciate the insights, like you said even if I could flash in Hong Kong SM-9860 in to my US SM-G986U, I might run into some software or calls dysfunctionalities..
Anyone got th atct update for the sm-g9880 yet? Seems the u.s has got this update before Asia?
x88888x said:
Damn.. that is some nice insights.. I read a thread somewhere too that US SM-G986U cannot and will not be able to enable its OEM or unlocked bootloader.. the eSim actually doesnt appear in the Sim Management Screen on my device. I really want to upload some links of the screenshot but for now I cant do anything as Im a new member.. I just have to wait for the network shop to open up to change my current esim card to physical simcard.. its been 2 months plus of this coronavirus lockdown and our network providers cant do much about it too..
Anyways I really appreciate the insights, like you said even if I could flash in Hong Kong SM-9860 in to my US SM-G986U, I might run into some software or calls dysfunctionalities..
Click to expand...
Click to collapse
u typically cannot flash hk/china firmware onto us devices bcuz those models r typically oem unlockable and they make sure ppl cant just flash the firmware to a u model and unlock tye bl.. theyre typically signed with dif keys and would most likely fail instantly to flash
elliwigy said:
u typically cannot flash hk/china firmware onto us devices bcuz those models r typically oem unlockable and they make sure ppl cant just flash the firmware to a u model and unlock tye bl.. theyre typically signed with dif keys and would most likely fail instantly to flash
Click to expand...
Click to collapse
Thank you I understand..:crying: now I feel like I wanna sell my Verizon unlocked phone ?
tdevaughn said:
Oh, the Brazil variant. Still dont think it will work. They might be dual sim
Sent from my SM-G988U1 using Tapatalk
Click to expand...
Click to collapse
Do you think i can flash the Korean firmware on the SM G9860 BRI?
iNexusVitto said:
Do you think i can flash the Korean firmware on the SM G9860 BRI?
Click to expand...
Click to collapse
Not possible, the only options are flashing the SM-G9860 China or Hong Kong FW.
I currently have the US s20Ultra unlocked model on ATT (don't foresee changing carriers). Currently I am missing features like VoLTE and VVM. What other features would I be missing if I stay on the unlocked firmware? Can I flash the ATT firmware to get those missing features? Can I flash back to unlock?
Thank you
What's the CSC on your device?
varcor said:
What's the CSC on your device?
Click to expand...
Click to collapse
I am not sure what I am looking for. Its currently on ATT/ATT.
Open your dialer, enter *#1234#, press the Dial Icon. You'll see CSC: G98??, the next 3 letters will be your device's CSC Code. Your Service Provider's CSC is "ATT" which is different than the CSC in your device. Whether or not you can change the CSC depends on your device's CSC. Device firmware is always configured for the specific, original CSC or Multi CSC's.
This post may be the best workaround.
https://forum.xda-developers.com/showpost.php?p=82444733&postcount=8
varcor said:
Open your dialer, enter *#1234#, press the Dial Icon. You'll see CSC: G98??, the next 3 letters will be your device's CSC Code. Your Service Provider's CSC is "ATT" which is different than the CSC in your device. Whether or not you can change the CSC depends on your device's CSC. Device firmware is always configured for the specific, original CSC or Multi CSC's.
This post may be the best workaround.
https://forum.xda-developers.com/showpost.php?p=82444733&postcount=8
Click to expand...
Click to collapse
My CSC: G988U1OYM1ATE4
garyHal said:
My CSC: G988U1OYM1ATE4
Click to expand...
Click to collapse
Your device has Multiple CSC's which are included in OYM so you should be able to change your CSC to ATT, which is the CSC for AT&T.
Go to "Settings" then "About phone". Write down your IMEI Number. Open dialer and enter *#272*IMEInumber# (In the thread replace IMEInumber with your actual IMEI Number). Press the Dial Icon, you should see a screen with the list of available CSC codes for your device. Select ATT and tap the Install option.
Be aware your firmware isn't AT&T, it's unbranded so even if you change the CSC, full call functionality may not be available. You can obtain AT&T's firmware at SamMobile.
https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/SM-G988U1/ATT/
varcor said:
Your device has Multiple CSC's which are included in OYM so you should be able to change your CSC to ATT, which is the CSC for AT&T.
Go to "Settings" then "About phone". Write down your IMEI Number. Open dialer and enter *#272*IMEInumber# (In the thread replace IMEInumber with your actual IMEI Number). Press the Dial Icon, you should see a screen with the list of available CSC codes for your device. Select ATT and tap the Install option.
Be aware your firmware isn't AT&T, it's unbranded so even if you change the CSC, full call functionality may not be available. You can obtain AT&T's firmware at SamMobile.
https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/SM-G988U1/ATT/
Click to expand...
Click to collapse
Varcor, thank you so much for all the directions.
As it stands right now, it is already on ATT. Once I flash over to the ATT firmware, would I be able to flash back to an unbranded one in the future, for whatever reason? Additionally, do I have to stay on the ATT firmware to retain those features? Or could just having my phone communicate with ATT at least once with my "branded" phone and then flash back retain those features?
garyHal said:
Varcor, thank you so much for all the directions.
As it stands right now, it is already on ATT. Once I flash over to the ATT firmware, would I be able to flash back to an unbranded one in the future, for whatever reason? Additionally, do I have to stay on the ATT firmware to retain those features? Or could just having my phone communicate with ATT at least once with my "branded" phone and then flash back retain those features?
Click to expand...
Click to collapse
You're most welcome. Yes, flashing back to unbranded won't be a problem. I don't think you will be able to retain the features if you go back to the unbranded firmware, it's not configured to allow full call feature functionality. Also, after flashing to the AT&T firmware you may need to contact their CSR for external programing. Good luck!
S20+ AT&T
Hi Varcor,
I'm new in this firmware things. I'm from Singapore and has been using S20 Exynos, but due to the extreme heat, bad battery life,etc. I've decided to import S20+ Snapdragon from AT&T, according to the Service provider SW ver information, it's showing as SAOMC_SM-G986U-OYN_ATT_QQ_0023 (I believe this means the set are unlocked).
With that said, I noticed that the software is outdated and the security patch level is on February 1,2020. when I referring to the AT&T website, It's showing as the latest software is QP1A.190711.020.G986USQU1ATE6 (June update) and mine still on QP1A.190711.020..G986USQU1ATAW (February). My CSC is G986UOYN1ATAW.
My question now is, whenever I tried to hit the software update, it's keep telling me that my software is up to date. Is there's a reason why it's wont detect the update? If it's because I'm in Singapore not US, then there's no choice that I need to flash using the firmware from Sammobile. The problem is which one that I need to download as AT&T carrier is not listed there. There's only T-mobile, Sprint, Unknown, USA. Please help.
https://www.sammobile.com/samsung/galaxy-s20-plus/firmware/#SM-G986U
Raigar said:
Hi Varcor,
I'm new in this firmware things. I'm from Singapore and has been using S20 Exynos, but due to the extreme heat, bad battery life,etc. I've decided to import S20+ Snapdragon from AT&T, according to the Service provider SW ver information, it's showing as SAOMC_SM-G986U-OYN_ATT_QQ_0023 (I believe this means the set are unlocked).
With that said, I noticed that the software is outdated and the security patch level is on February 1,2020. when I referring to the AT&T website, It's showing as the latest software is QP1A.190711.020SAOMC_SM-G986U-OYN_ATT_QQ_0023 (June update) and mine still on QP1A.190711.020..G986USQU1ATAW (February). My CSC is G986UOYN1ATAW.
My question now is, whenever I tried to hit the software update, it's keep telling me that my software is up to date. Is there's a reason why it's wont detect the update? If it's because I'm in Singapore not US, then there's no choice that I need to flash using the firmware from Sammobile. The problem is which one that I need to download as AT&T carrier is not listed there. There's only T-mobile, Sprint, Unknown, USA. Please help.
https://www.sammobile.com/samsung/galaxy-s20-plus/firmware/#SM-G986U
Click to expand...
Click to collapse
I would reach out to SamMobile and inquire why they're not listing the AT&T Firmware Update. You state your CSC is G986UOYN1ATAW. That CSC is also associated with T-Mobile. You're not using an AT&T SIM Card, correct? On a Multi-CSC Device when you insert a different SIM, the device should update to the correct Service Provider. If you're using a SIM from a Service Provider other than AT&T you probably won't receive AT&T Software Updates, which are distributed by Samsung, not AT&T via OTA.
varcor said:
I would reach out to SamMobile and inquire why they're not listing the AT&T Firmware Update. You state your CSC is G986UOYN1ATAW. That CSC is also associated with T-Mobile. You're not using an AT&T SIM Card, correct? On a Multi-CSC Device when you insert a different SIM, the device should update to the correct Service Provider. If you're using a SIM from a Service Provider other than AT&T you probably won't receive AT&T Software Updates, which are distributed by Samsung, not AT&T via OTA.
Click to expand...
Click to collapse
I did try to reach them, but for some reason they are giving me some irrelevant answer. Something like "You probably don't get OTA-updates (otherwise you got them already from AT&T)". We are having a conversation breakdown there, I think they are not an english speaker (or my english is just bad). Really? that CSC is associated with T-Mobile? now I'm getting more confused because the box is stated AT&T and it's sealed.
I'm using Singapore SIM card (Singtel), so you were saying this set I'm using right now is a Multi-CSC device? If i were to flash to the other carrier firmware, will it create any problem?
Raigar said:
I did try to reach them, but for some reason they are giving me some irrelevant answer. Something like "You probably don't get OTA-updates (otherwise you got them already from AT&T)". We are having a conversation breakdown there, I think they are not an english speaker (or my english is just bad). Really? that CSC is associated with T-Mobile? now I'm getting more confused because the box is stated AT&T and it's sealed.
I'm using Singapore SIM card (Singtel), so you were saying this set I'm using right now is a Multi-CSC device? If i were to flash to the other carrier firmware, will it create any problem?
Click to expand...
Click to collapse
Flashing Singtel Firmware won't work since it's configured for the Exynos SoC. Multi-SIM Devices have only regional Service Providers available, you don't have Singtel as an option in an AT&T device. Based on your situation I would consider one of two options. The first would be insert an AT&T SIM just for OTA updates. Not sure if you received an AT&T SIM when you purchased the device, if you didn't they're not hard to find. The second and likely best option is sell the device and purchase a Global Variant with a Snapdragon SoC, you'll receive updates regardless of your Service Provider. If it makes you feel any better there's lots of users in the same predicament. They want the Snapdragon device in regions selling mainly Exynos devices. Workarounds are in many situations are challenging,
varcor said:
Your device has Multiple CSC's which are included in OYM so you should be able to change your CSC to ATT, which is the CSC for AT&T.
Go to "Settings" then "About phone". Write down your IMEI Number. Open dialer and enter *#272*IMEInumber# (In the thread replace IMEInumber with your actual IMEI Number). Press the Dial Icon, you should see a screen with the list of available CSC codes for your device. Select ATT and tap the Install option.
Be aware your firmware isn't AT&T, it's unbranded so even if you change the CSC, full call functionality may not be available. You can obtain AT&T's firmware at SamMobile.
https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/SM-G988U1/ATT/
Click to expand...
Click to collapse
Varcor
I have the exact same phone and using the same network as garyHal, unlocked 988U1/OYM/ATT.
I got my bootloader unlocked and decided to apply the ATT firmware (
G988U1UES1BTJ2). My CSC was already ATT so I didn't perform the csc install step.
After setting the phone up as new, it still seems like its running the unlocked mode. I don't see any kind of branding or extra ATT stuff that may have been downloaded. How do I verify that I have the right firmware and CSC set to ATT?
Thank you.
itchyUnder said:
Varcor
I have the exact same phone and using the same network as garyHal, unlocked 988U1/OYM/ATT.
I got my bootloader unlocked and decided to apply the ATT firmware (
G988U1UES1BTJ2). My CSC was already ATT so I didn't perform the csc install step.
After setting the phone up as new, it still seems like its running the unlocked mode. I don't see any kind of branding or extra ATT stuff that may have been downloaded. How do I verify that I have the right firmware and CSC set to ATT?
Thank you.
Click to expand...
Click to collapse
How did you manage to unlock your bootloader since US Snapdragon variants are locked down pretty tight? I don't think the firmware is dedicated to ATT, it's Multi CSC, designed to function with a number of US Carriers. You should be delighted you're not suffering with ATT bloatware! To check the Active CSC go to About Phone, Settings, Software Information, Service Provider SW ver. On the bottom string the first three letters are the Active CSC on your device. You can review this article for additional information on Firmware and CSC's.
CSC and Home_CSC | All You Need to Know About ODIN Samsung Flash
Here is all you need to know about the CSC and Home_CSC.What exactly is a Firmware?A firmware is nothing but a permanent software which is programme
www.getdroidtips.com
varcor said:
How did you manage to unlock your bootloader since US Snapdragon variants are locked down pretty tight? I don't think the firmware is dedicated to ATT, it's Multi CSC, designed to function with a number of US Carriers. You should be delighted you're not suffering with ATT bloatware! To check the Active CSC go to About Phone, Settings, Software Information, Service Provider SW ver. On the bottom string the first three letters are the Active CSC on your device. You can review this article for additional information on Firmware and CSC's.
CSC and Home_CSC | All You Need to Know About ODIN Samsung Flash
Here is all you need to know about the CSC and Home_CSC.What exactly is a Firmware?A firmware is nothing but a permanent software which is programme
www.getdroidtips.com
Click to expand...
Click to collapse
If I am reading it correctly, this is what I am seeing:
ATT/ATT/XAA
I am happy that I don't have the ATT bloatware but I also feel that ATT is locking me out of some of their features because I don't have a "branded" phone, such as wifi call or visual voicemail. Am I misunderstanding your post from above, #6, that flashing ATT firmware would give me the carrier features?
Additionally, does the firmware determine what frequency bands I am using and if I am taking full advantage of ATT's offerings?
itchyUnder said:
If I am reading it correctly, this is what I am seeing:
ATT/ATT/XAA
I am happy that I don't have the ATT bloatware but I also feel that ATT is locking me out of some of their features because I don't have a "branded" phone, such as wifi call or visual voicemail. Am I misunderstanding your post from above, #6, that flashing ATT firmware would give me the carrier features?
Additionally, does the firmware determine what frequency bands I am using and if I am taking full advantage of ATT's offerings?
Click to expand...
Click to collapse
Flashing ATT Dedicated Firmware would give you the best chance for additional call features ASSUMING your Ulocked Device is capable of incorporating those features. It should do the trick since the hardware is identical to an ATT device. I would head to an ATT Store to get a definitive answer. Samsung has made it more and more challenging to mix and match branded and unlocked devices with CSC or Firmware modifications. In many cases you won't know until you try. Users want their smartphones to be smart, to work perfectly in every situation but the major carriers use proprietary tools to hold clients hostage.
varcor said:
Open your dialer, enter *#1234#, press the Dial Icon. You'll see CSC: G98??, the next 3 letters will be your device's CSC Code. Your Service Provider's CSC is "ATT" which is different than the CSC in your device. Whether or not you can change the CSC depends on your device's CSC. Device firmware is always configured for the specific, original CSC or Multi CSC's.
This post may be the best workaround.
https://forum.xda-developers.com/showpost.php?p=82444733&postcount=8
Click to expand...
Click to collapse
Please bro i need a help
My note 20 ultra is ATT unlocked
Because I'm not in united state
But in section about phone
My model is N986U note U1
am searching sammobil to udate my phone to android 13
I found nothing at&t with my model number N986U
Only N986U1
What should I do to update to android 13
This should do the trick.
Download Samsung Galaxy Note 20 Ultra 5G SM-N986U USC USA (US Cellular) firmware
All Samsung firmwares for Galaxy Note 20 Ultra 5G in USA (US Cellular) with model code SM-N986U. We offer free and fast download options. Check them out now.
www.sammobile.com
romano_ezzat said:
Please bro i need a help
My note 20 ultra is ATT unlocked
Because I'm not in united state
But in section about phone
My model is N986U note U1
am searching sammobil to udate my phone to android 13
I found nothing at&t with my model number N986U
Only N986U1
What should I do to update to android 13
Click to expand...
Click to collapse
Download Samsung Galaxy Note 20 Ultra 5G SM-N986U USC USA (US Cellular) firmware
All Samsung firmwares for Galaxy Note 20 Ultra 5G in USA (US Cellular) with model code SM-N986U. We offer free and fast download options. Check them out now.
www.sammobile.com
varcor said:
This should do the trick.
Download Samsung Galaxy Note 20 Ultra 5G SM-N986U USC USA (US Cellular) firmware
All Samsung firmwares for Galaxy Note 20 Ultra 5G in USA (US Cellular) with model code SM-N986U. We offer free and fast download options. Check them out now.
www.sammobile.com
Click to expand...
Click to collapse
I misunderstanding
What a trick bro
It's a link for firmware updates
I need to know which one compatible with my note
And after flash will still unlocked?
I have Samsung Galaxy Note 10+ 5G from Verizon that I bought a year ago. It is fully unlocked and I changed my carrier to AT&T. However, I don't see wifi-calling feature anymore. So, I was wondering if I can flash it with AT&T firmware and get the wifi-calling feature back.
Model : SM-N976V ,
CSC : VZW
Can I flash with SM-N976U ? If so, can someone also point me to the download link for CSC:ATT ? I tried finding on sammobile but didn't find it (I see only T-mobile and TMK)
If the N976V is U4 or lower, short answer = possible, risky.
I'm sure it's been asked already but I can't find any threads on it.
Seems like every carrier is getting Android 12 on the S20 line EXCEPT T-mobile.
I have an s20+ that is still under contract and carrier locked.
Is there any way to use the VZW firmware on it? Co-worker has same phone on VZW and has same FW version base (G986USQS2).
His full version is G986USQS2EVA4 which is android 12. My current firmware is G986USQS2DUJ7 which is obviously android 11.
Can I download and flash the files from VZW from samfw.com? Would I need to change CSC?
Or could I just pop in a VZW Sim (even though it's locked to TMO) and it would just download the FW?
Thanks for any help.. It's REALLY frustrating that even Xfinity and comcast are getting it already but not Tmobile............
There is a REASON I bought a flagship from a major carrier.. Updates... But seems like tmobile is in last place to get it figured out.