[Q] Speaker removal - LG Optimus G Pro

Hello, I cracked my screen and am trying to replace the screen myself. I have removed the screws and removed the back plating however I run into a weird situation that no matter how many times I search, I cant seem to find the answer to. So hopefully you can help me.
When I remove the back plating, the speaker does not come off along with it. Is this normal? It stays on the motherboard. I need to remove this in order to disconnect the camera. I have an F240K. How should I proceed?

Related

My front buttons dont work

Hello, what should I do? My front buttons sometimes dont work. I tried to flash official HTC rom, but it still doesnt work. But when I pres some of the left side button, temporarely the front buttons work. Have anybody some suggestions?
I have the same problem - front buttons "drop out". The only way to "re-initialise" them is to use the scroll wheel on the left hand side of the device.
It's definitely not Rom dependent. I've tried multiple roms (the official, Schaps (current), Faria, Shamanix, etc.) and it happens on all of them, so it's obviously a hardware issue. Not sure if there's a script that can be written to check and see if the keys are active, and if not, activate them.
Said to be BIG problem and possible onset of the dreaded WHITESCREEN SYNDROME....
Do a search on the forum and you might find out more...
Cheers...
I have exactly the same problem. The weird thing is that all LEDs work as expected, even the touchscreen works, but none of the buttons do, nor the ones on top neighter the ones on the bottom ... that's uncool :-(
i had the exact same problem, and in fact, its back again now because i didnt fix it properly
its to do with a loose d-pad connector. unfortunately, it involves opening up your handset, right down to the screen and reseating the d-pad connector and putting a small piece of foam or other plastic to keep it in place
good luck
Yeah, I get the whitescreen happening as well - but I thought that was a separate issue. If they are the same thing then I'll do the fix because I have the link to the whitescreen fix. Will post it when I get home
Here's link : http://forum.xda-developers.com/showthread.php?p=2238093
Cheers...
I just did this mod, but went all out. I had the exact same things happening to me as the original poster. I had replaced the cable between the screen and main body of the phone from a broken jasjam, and that didnt fix it. I had opened it many times to try and reset connectors without much luck.
After reading the thread linked by the above poster, i opened it up and put a piece of foam where the O.P said, but i also place a piece just below it, and on the cable connection to the screen. That was really loose and when i moved it, it seemed to cause the white screen errors also.
Further, i placed a bit on the long connector back in the main phone.
Working 100% now, no problems with front keys. Heres hoping i dont get the problem back in 2 days!! ill let you know. I just need this baby to hang on till the Touch Pro makes it to Australia.
I might give it a go - the white screen is becoming more of an issue for me now. The buttons have long been a problem and I need to fix it.
I'm also hanging for when the Touch Pro arrives in Aus

[Q] Touch Screen Problem

Recently I began to notice a problem with my phone. Whenever I have the keyboard slid out the touch screen is almost non-responsive. So over the past few days I've tried observing what the exact problem is and I think it could be the cable/ribbon that connects the touch screen to the keyboard. I'll have to tilt the screen back and forth before it will actually recognize me touching it. And I've noticed when I rub that ribbon it seems to work. There's also a crease in the ribbon where it folds on it when you close it. I believe this is the problem but I'm not sure and I want any advice/tips I can get. If it is the cable can you order a new one and replace it yourself?
Thanks in advance
Any ideas anyone? I cant get it to half work so I can text and stuff but I have to press it hard and it still wont work at times so something somewhere or another is wrong.
Tripp-phpBB said:
Any ideas anyone? I cant get it to half work so I can text and stuff but I have to press it hard and it still wont work at times so something somewhere or another is wrong.
Click to expand...
Click to collapse
Flash the stock ROM and SPL, and do a warranty exchange. This isn't a device you want to open up unless you really know what you're doing and are certain of the issue. If you really want to give it a go, then just buy a non-functioning unit from eBay to use for parts. They can normally be had for less than $40.
Wow, I cant believe that I finally found someone with the same problem as I have.
At first I thought that it was a software issue and I reloaded the software on my device.
The screen responds to presses with the keyboard in, but extended it doesnt respond and only the external keyboard works.
So to type a nice long sms I would have to start it on my display, flick out the keyboard to carry on and then flick it back in before I could press send or anything.
How frustrating.
But I did a test now and flicking the keyboard out and then slowly slowly pushing it back in I can get to a stage where both the external keyboard and screen responds at the same time again.
Definitely a ribbon problem or something.
Only had this phone for a few months now and if it already doing this then I am not feeling too obtimistic about its future.
Well, time to take it in for a warranty repair. I wonder how much greaf I am in for now.
Time to pull out my awesome trusty Artemis out the cuboard.
Tripp-phpBB said:
If it is the cable can you order a new one and replace it yourself?
Click to expand...
Click to collapse
I had a friend that had this problem with his TP2 which I've successfully repaired. First thing if you want to do it yourself, go to youtube and look for the Rhodium disassembly video (this will help you a lot). It is not difficult to change any parts in the phone provided that you proceed with caution and take the necessary precautions.
If you are afraid or have never opened up a phone to fix parts, then I would suggest to send it to HTC - this would be devastating if you managed to break up the motherboard by mistake or any other parts in the process of fixing the flex cable.
Tripp --
Did you ever find resolution to your problem? Recently my phone started having the same problem, which I originally thought was related to messing up the calibration file when I put loaded xdandroid GBX0A.
However, it sounds like my problem is pretty similar to yours -- touchscreen works fine when the keyboard is closed, but when it is open it only registers on the bottom of the screen -- which is actually useful in some sense because I can still hit the soft keys in the messaging app and such, but not so useful if you want to scroll using the touch screen. If I play around with the z-hinge a bit, sometimes it starts working -- which sounds like the same thing that you described.
Sorry, I just seen your post but I never fixed mine as I went ahead and bought another phone (Evo) but I did research the problem quite extensively and the problem I believe lies in the ribbon that connects the two halves of the phone. If I remember correctly the motherboard is in the side with the keyboard and that's why when it's slide out, the touch screen won't respond correctly. You can find the part online and replace it yourself. I've taken mine apart and it's not that hard but as said, you need the right tools and to be very careful.
Hi guys
I have tried all the above
Last resort is i got sprite backyup to work
BUT HOW THE HELL DO YOU HIT "NEXT" OR "OK" FROM THE KEYBOARD AS SCREEN DOESNT WORK????

Phone Broken?

My phone can't seem to work anymore if I slide it out. Everything just freezes, but if I tilt the screen up it works. Has anyone else had this problem before?
Well now the thing just freezes if the keyboard is out at all. I'm guessing it's a paperweight now?
A potential solution
lurker2389 said:
My phone can't seem to work anymore if I slide it out. Everything just freezes, but if I tilt the screen up it works. Has anyone else had this problem before?
Click to expand...
Click to collapse
Okay, I've just had this problem with an HTC Touch, and I think this works with any HTC that has a "digitizer" rather than an all-in-one touchscreen (I think newer phones have digitisers).
I'm not sure if this will always work, but I've just done it - sometimes the inactive touch screen is "broken" because the layers are stuck together (so the phone can't tell where the touch is, hence unresponsive). With mine, I looked at the screen side on and could see a kind of "oily" patch in the light.
The solution is to get masking/gaffa tape - the very sticky brown one. Stick it down on the screen/digitizer and then keep pulling it off - this pulls the layers from each other. I kept repeating this lots before it worked - and in the end I pulled the top layer completely off (I think you should pull from the top of the phone, as the layers need to be attached at the bottom of the screen/digitizer). Once it pulled away, I gently lay it back down (after panicking!!) and hey presto it started working again.
Good luck!
that sucks. might be a ROM things IDK

[Q]Xperia Pro - Screen Issues

Hey guys,
My Xperia Pro has been running into some problems with the display as of late. What happens is after a short period of keeping the phone idle, it doesn't wake up. When the power button or the home button is pressed, it just shows a blueish-black screen and the lights between the physical buttons light up. Same thing happens when the keyboard is slid out. The backlight of the keys work but the screen still shows a blueish-black color. After trying again and again, the screen finally works, just to run into the same problem after locking the screen.
I tried changing the ROM and flashing a different kernel to no use. Then I finally flashed a stock Gingerbread firmware. Now the screen doesn't show any blueish-black shade or anything else at all!!!! I have currently just left my phone to charge because I don't want the battery to run out during this crisis. I have also re-booted many, many times by pulling out and re-inserting the battery.
Any suggestions and tips would be highly appreciated! Thanks in advance guys!
My Xperia Pro have the same issue . Like when unlock , no screen (black) ,
The issue I found out is having something to do with my back cover
ie. If I remove the cover and reboot , and then unlock /lock , no problem, As soon as i put the back cover , it unlocks with black screen , I was sure no kernel or fw was the reason , as i have been through diff kernels and fws /roms without an issue like this , and as soon as the black screen shows and you try to restart it wont even show the logo , so i was damn sure ,its no kernel issue , Please check this method , i will try to find the exact issue why the back cover is making this.
Update: Found out that the push made by back cover with the battery (which basically may be jamming the strip or something inside) is making the problem , It may have more to it than this ,anyway this is my phone's problem
Screen on but no display
AeonWorld said:
My Xperia Pro have the same issue . Like when unlock , no screen (black) ,
The issue I found out is having something to do with my back cover
ie. If I remove the cover and reboot , and then unlock /lock , no problem, As soon as i put the back cover , it unlocks with black screen , I was sure no kernel or fw was the reason , as i have been through diff kernels and fws /roms without an issue like this , and as soon as the black screen shows and you try to restart it wont even show the logo , so i was damn sure ,its no kernel issue , Please check this method , i will try to find the exact issue why the back cover is making this.
Update: Found out that the push made by back cover with the battery (which basically may be jamming the strip or something inside) is making the problem , It may have more to it than this ,anyway this is my phone's problem
Click to expand...
Click to collapse
I have the same problem, and back cover was not the solution for me. What should I do???
Yep the back cover is a problem!
AeonWorld said:
Update: Found out that the push made by back cover with the battery (which basically may be jamming the strip or something inside) is making the problem , It may have more to it than this ,anyway this is my phone's problem
Click to expand...
Click to collapse
That actually worked for me initially..removing the back cover and rebooting. But its not now, what ever I do I only see the dim lit LCD screen.
But yeah, I am able to unlock the phone in the blind and also hear the increase/ decrease in the volume by pressing the volume rocker and also touch and hold on the home screen to feel the vibration (guess for removing the widget or something that's already there).
So is there any solution for this, or any first aid before I get my Xperia Pro to the service centre ??

Headest constantly on on G4

Dear friends,
I have an issue with the LG G4, recently a sign of headset has appeared in the notification bar, without anything connected to the AUX, as a result i cant make phone calls anymore because the microphone and the earpiece are not working.
I have tried to see if there are anything inside the AUX input, but found none, afterwards i have replaced the Aux to a new AUX piece - didnt solve the problem.
As a result i tried to do a full factory reset of the phone - still same problem headest sign is on.
I dont know what else to do, have you encountered or know how to deal with this situation ? does it mean i have to replace the whole motherboard?
i am running 6.0 stock version of the phone.
With regards.
modesty1 said:
Dear friends,
I have an issue with the LG G4, recently a sign of headset has appeared in the notification bar, without anything connected to the AUX, as a result i cant make phone calls anymore because the microphone and the earpiece are not working.
I have tried to see if there are anything inside the AUX input, but found none, afterwards i have replaced the Aux to a new AUX piece - didnt solve the problem.
As a result i tried to do a full factory reset of the phone - still same problem headest sign is on.
I dont know what else to do, have you encountered or know how to deal with this situation ? does it mean i have to replace the whole motherboard?
i am running 6.0 stock version of the phone.
With regards.
Click to expand...
Click to collapse
I had this issue with my lg g3. so... get the battery out , take your hair dryer and do not set on very hot and then dry the jack couple of minutes . after that put the battery back and start the phone. That should do it. I`m pretty sure u got a drop of water in there and thats the cause.
Thank you for the help, but its not the problem, i have switched the jack to a new one, i have tried now to use the hair dryer on all the pieces after disassembling the phone, still same problem.

Categories

Resources