Related
Hi,
I had been using blackout rom for more than 2 months now. Started with 3.0 now installed 3.1.1. I did full wipe and followed each step as said.
Everything works fine except that my fone restarts while in call. This happens once in 2 days or may not happen either.
in both the roms i have had the same problem. Can anyone or the developer please guide me regarding. This is annoying.
Thank You
Well if you want help from the developer go straight to the original thread and ask. Also 3.2 is out, have you tried that one?
hukel56 said:
Well if you want help from the developer go straight to the original thread and ask. Also 3.2 is out, have you tried that one?
Click to expand...
Click to collapse
I am not allowed to post in that thread, according to the forum rule.
I have nt tried 3.2 coz it still have same things missing and also m not sure if anyone else has faced this problem.
Hello All,
I know it topic has been discussed many time, but please clarify me something more on this.
I have a HTC One V Cdma device, i flashed a custom rom recently and i experienced continuous reboot.
So, i searched the forum and found that i have to downgrade the radio and then use the kernel provided by the developers.
I found this link http://forum.xda-developers.com/showthread.php?t=2018518.
In this link i am finding the Football's Primo Shipped ROM Collection links unavailable.
From where else i can get this file.?
Also, what will happen when i downgrade the radio ? Will it cause any adverse effects ? ..
Also let me know how to install this RUU
Ok. So the RUU you are looking for if you have CDMA is this one.
http://www.htcruu.com/securekey.php..._Sprint_WWE_VM_1.08.652.11-1.08.652.6.zip.md5
You also want Stock Recovery and Stock Boot.img. before restoring to the stock RUU I believe, unless your doing it your own way.
The site is htcruu.com and all thanks to JMZ.
Curiousn00b said:
Ok. So the RUU you are looking for if you have CDMA is this one.
http://www.htcruu.com/securekey.php..._Sprint_WWE_VM_1.08.652.11-1.08.652.6.zip.md5
You also want Stock Recovery and Stock Boot.img. before restoring to the stock RUU I believe, unless your doing it your own way.
The site is htcruu.com and all thanks to JMZ.
Click to expand...
Click to collapse
Thanks for the reply bro. I am seeing 2 type of files .zip and .exe file. Which file i should use ?
In many threads i am seeing that we should flash the radio 521_2. So now which file i should choose for the same.?
Also the .zip file is of very small size only 17MB and the other file is 350 MB why there is a huge difference between the sizes.
please assist. All i wanted is to run a Stable JB without boot loop.
The RUU is the bigger file. Just make sure you use the right one.
The Zip is the OTA update that will cause the bootloop on Custom Roms.
So....why do we even have a q&a section if people can just post here and get answers without repercussions?
Sent from my HTC One V using Tapatalk 2
GUImess said:
So....why do we even have a q&a section if people can just post here and get answers without repercussions?
Sent from my HTC One V using Tapatalk 2
Click to expand...
Click to collapse
I experience the same boot loop or freezeup with custom rom. And what worked didn't have wifi and came with other bugs. My old HTC wing had easier rooting to be honest. I eventually gave up with this modding this phone so I might sell this phone out of frustration.
xecutionkrk said:
I experience the same boot loop or freezeup with custom rom. And what worked didn't have wifi and came with other bugs. My old HTC wing had easier rooting to be honest. I eventually gave up with this modding this phone so I might sell this phone out of frustration.
Click to expand...
Click to collapse
OK the issues you had are from not installing the correct boot.IMG OR having a radio version that made it impossible to flash custom firmware to your HOV. This seriously belongs in Q&A thread.
EDIT: Lloi shut his cm thread down to a dumba$$ question being posted earlier. Please folks read before just posting I made mistakes at first too but people please......
sentfromybrain
I could always TeamViewer people if they don't understand. Lol
Sent from my HTC One V using Tapatalk 2
Seriously people take curious up on the team viewer offer so that you can watch him and learn how to do this stuff. Maybe we should make a YouTube video with all the steps.
And yes, wrong section. Op in the future please take note that questions belong in q&a, it helps us stay organized.
Sent from my One V using xda app-developers app
Hi,
Greetings to all,I have been trying to get my hands dirty (learn a thing or two on ROM development) for a very very long time but never had the courage to take the plunge !
Finally I have decided to do it albeit a safer way,I have tried to port latest LEWAOS to Arc using the porting tool by Abinav2. I also tried others but kept getting one or the other errors.
Have taken the CM10 Nightly and the latest Lewa OS5 for the job and the result was successful to a large extent, The ROM installs fine but won't go past initial boot logo,There is no Boot Loop ! Its simply stuck at starting logo.
Have tried multiple kernels and tried to redo the ROM many times but no joy,One more interesting thing I noticed is in Lewa there is no init.d in etc folder,so how does one deal with it ??
So I finally decided to post it here to ask for some guidance and to check whether someone can actually boot into it.
Here's the ROM LewaXperia
PS: This is my first post on development front so please be gentle and Mods if this is not okay than please do let me know before you take any actions or suggest the right thing to do.
Regards.
Hi,
Guys can anyone please reply ? Did anyone of you try it ?? Results ??
Regards.
Try to change bootclasspath check my signature
Sent from my WT19i using XDA Free mobile app
Hi,
Try to change bootclasspath check my signature
Click to expand...
Click to collapse
Thanks a lot for the help !! I really Am trying to make it work,But its just not happening.
I tried to change bootclasspath as suggested by you but there is no init.rc in both the ROM's !! So what Am I supposed to do now ? In the extracted folder there is sbin (folder),logo.rle and init,Thats all there are no other file or folder like your video shows.
Regards.
Not rom u have to extract kernels
Sent from my WT19i using XDA Free mobile app
Hi,
Not rom u have to extract kernels
Click to expand...
Click to collapse
Yes sorry that's exactly what I meant, Meaning the kernel's inside both the ROM's ! The kernels of both the ROM's doesn't have the anything else but the above mentioned.
Regards.
handsome1_blr said:
Hi,
Guys can anyone please reply ? Did anyone of you try it ?? Results ??
Regards.
Click to expand...
Click to collapse
First off you posted in the wrong section. All questions, help and troubleshooting issues should be posted in the Q&A, Help and Troubleshooting sections. You posted in the sacred section of development where only developers should me making threads. Also you need to wait 24 hours before bumping your thread if unanswered.
Thread moved
FNSM
Q&A for [ROM] [4.4.4] [Dec-02] [UNOFFICIAL] LiquidSmooth v3.2 | stable | Release 2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.4] [Dec-02] [UNOFFICIAL] LiquidSmooth v3.2 | stable | Release 2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thank you for your great work
Can you please make a rom for CDMA users too? Or tell me what files i need to change to be able to run this rom on my Htc Desire CDMA? If you want i will even pay for it please. I am sick of GB rom and Ics and Jb roms always break after a while. I speak in the name of all CDMA users. Have mercy please. May God bless you ! I know that you will help me. Thank you.
gothsk8er said:
Can you please make a rom for CDMA users too? Or tell me what files i need to change to be able to run this rom on my Htc Desire CDMA? If you want i will even pay for it please. I am sick of GB rom and Ics and Jb roms always break after a while. I speak in the name of all CDMA users. Have mercy please. May God bless you ! I know that you will help me. Thank you.
Click to expand...
Click to collapse
If it is possible with evervolv kernel to make a ROM for CDMA, then I will do.
Take it easy, I don't want your money. I need you to contribute knowledge on this because I don't have time to read all cdma related rom threads for htc desire. If you stumble across the relevant information just share it with me.
Cheers!
Sent from my Nexus™4 ?
ART
Is ART active by default?
Activating it in developer options gives me bootloops.
edit: got it, forgot to activate a2sd first
great work but
i want to report a "bug":
when using the calender widget:
scrolling up and down works, i can see my calender events, but everytime i double click on the widget to open one event, the phone crashed and reboots. how to debug ?
regards,
GN
Awesome ROM. This really gives my tired Desire a new lease on life .
The only thing missing from the install guide was a quick and dirty A2SD install tutorial.
reboot during call
hi, im getting random reboots especially while phone calls. is it kernel based error, is there anythind to do?
thanx for reply
heygidi said:
hi, im getting random reboots especially while phone calls. is it kernel based error, is there anythind to do?
thanx for reply
Click to expand...
Click to collapse
Does this problem also occurs on the stock ROM?
Are you the first owner of the A8181?
As well it might be a hardware problem (for example, damage), or overheating caused by the motherboard.
ze7zez said:
Does this problem also occurs on the stock ROM?
Are you the first owner of the A8181?
As well it might be a hardware problem (for example, damage), or overheating caused by the motherboard.
Click to expand...
Click to collapse
Thank you for replying. No, never occurred on stock. I used beanstalk ROM for 6 months , except rare reboots, everything was cool , until my SD card blow up. A week ago I got a class 10 card and i flashed beanstalk again, then my phone started to reboot while phone calls and overheating. After that i decided to flash liquidsmooth but reboots while calling and overheating continue.
rom
probe whith stock rom /mabe this problem is end
Problem with Liquidsmooth v3.2 on HTC Desire Bravo
Hi
My faithful Samsung S3 died 6 weeks before the end of my contract and I'm trying to resurrect my old HTC Desire to keep me going. When I booted it, it was still running Cmd 7 and of course, hardly and of my usual apps would work on it.
I did a bit of reading today and then followed the instructions for installing Liquidsmooth v3.2 which was all good and made me much happier. Only problem is, I've installed only 8 apps and have run out of internal memory despite having activated app2sd. I know that it's working, as the Ext2 partition is about half full but the internal memory is down to only 4mb of space and barely functioning.
I've obviously done something stupid! Can someone help?
Thanks
Tarebare said:
Hi
My faithful Samsung S3 died 6 weeks before the end of my contract and I'm trying to resurrect my old HTC Desire to keep me going. When I booted it, it was still running Cmd 7 and of course, hardly and of my usual apps would work on it.
I did a bit of reading today and then followed the instructions for installing Liquidsmooth v3.2 which was all good and made me much happier. Only problem is, I've installed only 8 apps and have run out of internal memory despite having activated app2sd. I know that it's working, as the Ext2 partition is about half full but the internal memory is down to only 4mb of space and barely functioning.
I've obviously done something stupid! Can someone help?
Thanks
Click to expand...
Click to collapse
How did you partition it?
Sent from my HTC Desire S using XDA Free mobile app
lilsafbig said:
How did you partition it?
HI
I followed the instructions here to the letter and used the 4ext method to partition a 1024 sd-ext Ext4 partition.
Any help would be great!
Thanks
Click to expand...
Click to collapse
Tarebare said:
lilsafbig said:
How did you partition it?
HI
I followed the instructions here to the letter and used the 4ext method to partition a 1024 sd-ext Ext4 partition.
Any help would be great!
Thanks
Click to expand...
Click to collapse
Ok that's the correct way but you said you had ext2?
Sent from my HTC Desire S using XDA Free mobile app
Click to expand...
Click to collapse
lilsafbig said:
Tarebare said:
Sent from my HTC Desire S using XDA Free mobile app
Click to expand...
Click to collapse
So I did ... my mistake. I followed the steps and created Ext4.
I have now had to uninstall every app with the exception of 2 and even then, the phone is painfully slow. Any advice, much appreciated.
Click to expand...
Click to collapse
Tarebare said:
lilsafbig said:
So I did ... my mistake. I followed the steps and created Ext4.
I have now had to uninstall every app with the exception of 2 and even then, the phone is painfully slow. Any advice, much appreciated.
Click to expand...
Click to collapse
Yh u might aswell backup your apps using titanium back up or leave it cos u only got 2 installed and then do a full wipe and flash the rom again and follow instructions then see what happens.
Sent from my HTC Desire S using XDA Free mobile app
Click to expand...
Click to collapse
pls help after install rom a2sd gapps, reboot my phone now im stuck on boot animation..
waver123 said:
pls help after install rom a2sd gapps, reboot my phone now im stuck on boot animation..
Click to expand...
Click to collapse
Take a logcat and post here.
Sent from my Nexus™4 ?
i can´t make the device pass the booth animation. i don´t know what i need to make it work.
I follow all the steps in the 2nd post here.
The same thing happend with beanstalk rom
HTC Desire
Hboot 450mb
ext4 4 gb
4Ext touch recovery
I used these instructions
http://webcache.googleusercontent.c...00/wordpress/?p=708+&cd=2&hl=nl&ct=clnk&gl=nl
(from google cache - the original page does not seem to exist any more?)
The most important thing is to use ext4 for the recovery image -- after rooting etc your Bravo will be USB bricked. The ext4 recovery has a USB-unbrick function This thread has some more installation info http://forum.xda-developers.com/showthread.php?t=2549776
[Q&A] [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini
Q&A for [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini 3G/LTE
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini 3G/LTE. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Arco, I don't think you'll ever be thanked enough for all the work you have done for the S4 mini. I mean it. Many, many, many thanks and please keep it up for as long as you can because plenty of us appreciate what you're doing. I'm part of a big silent majority (longtime lurker of the XDA forums, never poster) and I've made this account just to tell you this.
Hi
This is awesome, firstly thanks to arco68 and Cm team and contributors for all this hard work.:good:
Id like to know has anyone experienced no-sound-in-call bug? and how is bluetooth audio these days?
How long does the first reboot?
I have already installed twice, but when I reboot is in the CM Logo boot more than 20 minutes does not start.
Did a clean install! And my recovery is the latest 6.0.5.1!
At this point I have not done reboot and is working, but when you? Until I'm afraid!
Does anyone have this problem?
MushyMan said:
Hi
This is awesome, firstly thanks to arco68 and Cm team and contributors for all this hard work.:good:
Id like to know has anyone experienced no-sound-in-call bug? and how is bluetooth audio these days?
Click to expand...
Click to collapse
Hi, I think BT audio is fixed but I can't confirm you about the car...
xuleca said:
How long does the first reboot?
I have already installed twice, but when I reboot is in the CM Logo boot more than 20 minutes does not start.
Did a clean install! And my recovery is the latest 6.0.5.1!
At this point I have not done reboot and is working, but when you? Until I'm afraid!
Does anyone have this problem?
Click to expand...
Click to collapse
Hi, your device has booted ?
Oijkn said:
Hi, your device has booted ?
Click to expand...
Click to collapse
First time YES, but if I reboot it's stuck in CM logo.
Did you check the md5 of your downloaded file perhaps it's bad ?
xuleca said:
How long does the first reboot?
Click to expand...
Click to collapse
The first boot loop animation lasted 12 minutes in my case. But I also installed a full stock gapps package, so I think it shouldn't be longer than that.
Oijkn said:
Did you check the md5 of your downloaded file perhaps it's bad ?
Click to expand...
Click to collapse
I check and checksum is ok
---------- Post added at 10:22 PM ---------- Previous post was at 10:20 PM ----------
puscasumarin said:
The first boot loop animation lasted 12 minutes in my case. But I also installed a full stock gapps package, so I think it shouldn't be longer than that.
Click to expand...
Click to collapse
And did you reboot after?
My first boot take some time but boot, the problem is when I reboot
Try to do a full wipe but with another recovery like Philz Touch and do a new clean install.
How can i disable the hardware button light up when i touch the screen? i only want them to light op when i touch the buttons.
Thanks in advance.
update
Hey! Will we get upates ofer the cm update( from setings ) or we have to flash every new build?
Thanks for suport!
Normally you can use the CM Update from the settings that work great !
But for my part I prefer to download it from my computer because sometime I've got an md5sum error if I download it from my phone (depend of your internet connection...).
Oijkn said:
Normally you can use the CM Update from the settings that work great !
But for my part I prefer to download it from my computer because sometime I've got an md5sum error if I download it from my phone (depend of your internet connection...).
Click to expand...
Click to collapse
SAme here one time
@ Daryl the light can.t be enabled only on toch the buttons .
xuleca said:
And did you reboot after?
My first boot take some time but boot, the problem is when I reboot
Click to expand...
Click to collapse
After all was set up and running, I did at least one manual reboot. Everything went normal for me.
Oh.. It's annoying Every time i touch the screen it lights up..
And messages app FC cleared data same
Btw, perfect cm rom!
DaryI said:
Oh.. It's annoying Every time i touch the screen it lights up..
And messages app FC cleared data same
Btw, perfect cm rom!
Click to expand...
Click to collapse
You cand disable the light and problem solved :
message app works well until now. No problem here
Hi, can someone please confirm or put me in the right direction. Thanks in advance.
I'm currently running F4k unofficial cm 12 with F4k pre4 kernel, if I format everything and clean install this ROM will I have to flash a different kernel (if so which one) or will it install its own kernal along with the rom? as I've read that f4k pre4 kernel is not a good combination with this rom as it works in a different way.
Hope this makes sense an someone can enlighten me.
Thanks
Insomniac-Butler said:
Hi, can someone please confirm or put me in the right direction. Thanks in advance.
I'm currently running F4k unofficial cm 12 with F4k pre4 kernel, if I format everything and clean install this ROM will I have to flash a different kernel (if so which one) or will it install its own kernal along with the rom? as I've read that f4k pre4 kernel is not a good combination with this rom as it works in a different way.
Hope this makes sense an someone can enlighten me.
Thanks
Click to expand...
Click to collapse
Flashing this official CM and GApps you will have CM kernel as all. :good:
BLN control says that kernel doesn't support functionality :/