Related
Hi everyone,
So, I've got an interesting issue, and I realize that it is likely my fault. I was flashing various ROM's (CM10, CM9 etc) on the phone, and eventually when I put the stock ROM back on, I was only able to connect on "EDGE". I called Rogers and they said my account checked out. So, I did more ttroubleshooting, and in that I noticed that my IMEI was set to "0". So, I found a guide on here to re-add the IMEI using QPST and I was able to get back on 3G, but no 4G/LTE. After rebooting and some time passed, I am now on 4G, but no LTE and this is my issue. Before you say 4G is LTE, I tend to want to disagree. I used to get LTE, and I did see it pop up once since I fixed the phone, but the phone crashed and i wasn't able to test it with LTE running. Since then, I haven't seen it again. I also ran the "Phone Info" app, and if I set it to LTE only, I never get a data connection, even after rebooting, pulling battery etc.
Why I think 4G is not LTE is because when I ran speedtests before I broke my phone, I was getting 28MB down, and 8-10MB up. now, I'm lucky if I'm getting 1MB down and .2MB up. I have once gotten 4MB down, and .8MB up, but this is WELL below LTE speeds that I've had in the past.
I'm hoping someone might be able to help me get back to a 100% clean, stock ROM, modem, firmware etc. I have installed 2 different stock ROM's that I found for the Rogers i747m; one is ~700MB, the other is 1.2GB. Both have the same issue with 4G only. I've also flashed the stock Rogers modem, and still no luck.
Any help would be appreciated, but here are some specific questions if you can help.
Does anyone have screenshots of their stock "about" page, and the "status" page in the phone menu?
Does anyone have a bone stock "complete" firmware/ROM for the Rogers i747?
Is there anything I can do to fix this on my current ROM (stock)?
Thank you!
Here are the threads I've reviewed and followed to try and resolve the issue.
http://forum.xda-developers.com/showthread.php?t=1747200
http://galaxys3root.com/galaxy-s3-unroot/how-to-unroot-canadian-galaxy-s3-sgh-i747m-stock-roms/ (using the Rogers ROM)
http://forum.xda-developers.com/showthread.php?p=29462530#post29462530 (To restore IMEI)
Well I know you are right about one thing when it says 4g it's not the same as LTE mine says LTE when it's on LTE. I'm on Telus though. I have seen others in Canada with this issue after restoring the IMEI, maybe you should check that thread to see if there are any solutions.
Halmo said:
Well I know you are right about one thing when it says 4g it's not the same as LTE mine says LTE when it's on LTE. I'm on Telus though. I have seen others in Canada with this issue after restoring the IMEI, maybe you should check that thread to see if there are any solutions.
Click to expand...
Click to collapse
I ran through every post in that thread, but still no LTE. Man this is driving me crazy. I'll pay someone if they can help me get LTE back... I've already restored the QCN info using the QCN creator posted in one of the threads.
What do you have for your APN settings?
Motokorth said:
What do you have for your APN settings?
Click to expand...
Click to collapse
Thanks for replying. The apn settings are correct, ltemobile.son and the tethering one. This was one of the first things I checked. I'll add screenshots tomorrow if it's helpful
Thanks!
Interesting...got on LTE randomly...well sort-of
SkydiverChris said:
Thanks for replying. The apn settings are correct, ltemobile.son and the tethering one. This was one of the first things I checked. I'll add screenshots tomorrow if it's helpful
Thanks!
Click to expand...
Click to collapse
So, here's something a bit more interesting. Just before bed last night, I caught my phone on the LTE network. I tried loading a few pages/apps, but nothing was working. AFter about a minute, I lost all data connection and it popped back up about 10 seconds later back on 4G and was working again. Not sure if this helps anything, but I did grab a screenshot when it was on LTE.
Anyone?
http://forum.xda-developers.com/showthread.php?t=1826409
RayoMax said:
http://forum.xda-developers.com/showthread.php?t=1826409
Click to expand...
Click to collapse
Thanks for that thread, but does anyone know why the person is removing the SIM and going through all that trouble when rebooting does the exact same thing?
I have used the #2263 menu to set my phone into LTE only mode, and I get no data connection, nor any cell connection either. Switch it back to Automatic and it jumps right back on 4G.
It is faster to remove the sim and enter *#2263# code lol. Once the sim is removed, a no sim notification should appear. Better than waiting for you phone to reboot.
I will post my lte apn setting for you. Hopefully that will help.
Name
Rogers LTE
APN
ltemobile.apn
Proxy
Not Set
Port
Not Set
Username
Not Set
Password
Not Set
Server
Not Set
MMSC
ttp://mms.gprs.rogers.com
MMS proxy
10.128.1.69
MMS Port
80
MCC
302
MNC
720
Authentication Type
None
APN type
default,mms,supl
APN protocol
IPv4
Enable/disable APN
APN enabled
Bearer
Unspecified
---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------
MMSC
ttp://mms.gprs.rogers.com
There is obviously a h before ttp:// lol. I am still a new member and can't link "websites" yet.
---------- Post added at 08:40 PM ---------- Previous post was at 08:33 PM ----------
It could also be the modem... I have a link to a stock rogers modem. Just flash in recovery and you may have LTE again. http://forum.xda-developers.com/showthread.php?p=29517422&highlight=rogers#post29517422
Just fyi...
I also have a Rogers S3 and noticed that I am not getting the LTE icon on the notification bar after the first week. Now, I only get a 4G icon in GSM, HSDPA, LTE mode, and 3G/H+ in GSM, HSDPA mode.
However, with the 4G icon, I can still get speeds of 30Mbps down, 13 Mbps up, and under System Information, it shows LTE in Network Type.
My conclusion was that dont rely on the icon in the notification bar. Check the system information page to see the actual network type.
The only time I can get the LTE icon to actually show when I am connected to the LTE network instead of the 4G icon is through re-flashing the ROM. I have tried clearing the cache through recovery menu and it still wont work.
I know this doesnt solve your issue, but I hope this will help anyone that stumble across this problem.
Cheers
Thanks for posting all of that. My APN settings are the same, except the APN type. Mine is set to "Internet + MMS". If I change it, I am prompted with a menu to choose from and the settigns on yours are not in the list. Basically it has the folllwing list:
Internet + MMS + DUN
Internet + MMS
Internet + DUN
INternet
MMS
DUN
Also, flashing the Rogers Modem was probably one of the first things I did. I thought that would have been most likely.
My mobile Network type is UMTS:3 and I am definately not getting LTE speeds. I've heard people say that they only see the 4G icon, but get LTE speeds, but I'm only getting about 5down, and less than 1 up. I say that when I was on another ROM, it showed 4G, but seemed much quicker. Now I'm just hosed.
Out of curiosity, under the system settings, what do you have listed for ERI Version and IMEI SV?
Thanks!
Any other ideas?
Mine show ERI Version: Not Available
IMEI SV:01
Hope that help you.
Side note: I also note that for reasons of economy of battery when I switch to GSM network and I want to return to the lte network, it takes a long time to show me the lte icon....it's seem to stuck a few minutes on the edge even if gsm/hspa/lte(auto mode) is selected.
duchkata said:
Mine show ERI Version: Not Available
IMEI SV:01
Hope that help you.
Side note: I also note that for reasons of economy of battery when I switch to GSM network and I want to return to the lte network, it takes a long time to show me the lte icon....it's seem to stuck a few minutes on the edge even if gsm/hspa/lte(auto mode) is selected.
Click to expand...
Click to collapse
Thanks...those settings are the same on mine. Those are the only ones that stand out to me.
Thank you!
SkydiverChris said:
I ran through every post in that thread, but still no LTE. Man this is driving me crazy. I'll pay someone if they can help me get LTE back... I've already restored the QCN info using the QCN creator posted in one of the threads.
Click to expand...
Click to collapse
check peoplearmy's thread - he added info on how to also restore data. if you have having a problem, maybe don't use your own qcn, generate one with his method and restore that. Worked like a charm for me.
Gabik123 said:
check peoplearmy's thread - he added info on how to also restore data. if you have having a problem, maybe don't use your own qcn, generate one with his method and restore that. Worked like a charm for me.
Click to expand...
Click to collapse
I'm pretty sure I did that...but you have to use your own QCN to generate the new "injected" QCN. As far as I know, it doesn't generate one out of nothing. Unfortunately, I didn't have a QCN generated prior to breaking it. Now the "original" QCN I have is "broken" so when I inject it, it's injecting into a broken QCN.
Something I was curious about doing was getting another Rogers S3 QCN (from a willing XDA member), modifying the IMEI and injecting that back into my phone. Not sure if that would break things, but it might be worth a shot. I'm pretty desperate at this point.
Anyone willing to send me their Rogers QCN, so I can replace the IMEI, and inject it into my phone? Worst case the phone blows up, best case I get LTE back, or just restore my current "broken" QCN.
Thanks!
So...I am now fairly convinced that it actually is a hardware issue and not a software issue. I noticed that it was on LTE again (4th time in a week). I was outside walking my dog. I checked tosee if it was working, and out of shock it was! I then downloaded and ran speedtest...got 28down, 9.5 up. BAM!
Now, here's the kicker. I am in a zone where I've always had 4 bars of LTE, except now I can only get it outside. I checked the signal and it was at 62dbm. Walk inside my house, and it jumps to 87+ dbm and drops LTE. I've always had full LTE signal in my house, work, everywhere, now nothing. Based on this, I am certain that the antenna/radio is pooched. Now I have to either get it repaired or get a refurb...ugh. Giving up my month and a half old phone for a refurb really blows...
I am with Telus, and having the exact same problem (minus the IMEI thing).
I flashed to CM10, and my LTE stopped working. Went back to stock, and it's still not working.
Setting phone to LTE only gets me no signal.
I've tested it in Toronto, Mississauga, Barrie (all LTE capable) and nothing is working.
Apparently, it's an issue with the phone. Search Google for Galaxy S3 radio issues (or swap radio for signal) and there is tones of threads. I have a refurb phone coming from Rogers this week, and I'm gonna leave it at stock. Really sucks...but LTE is the bomb.
I read on one thread that Samsung is supposed to push a code fix for the modem, but that's from a bunch of people speculating on the issue. How true it is...time will tell. I'll post back if/when I get LTE back on the new phone.
So, I just got the new phone and LTE is back working everywhere it used to with full signal and full speed.
I hAve this now too...but it's just the icon as I am getting LTE speeds.
Might call Rogers too...
Hey All,
So, for some reason, I am unable to get LTE when i am flashed on the AOKP jellybean rom for the SGH-1747M (rogers)
I did everything that was stated in Task's Gerrit (Changed the connection for WCDMA to LTE/GSM auto), all that does is work for a while on H+, then disconnects.
I've changed my apn settings to the Rogers LTE settings, which just cuts off communication all together
Ive flashed Rogers Modems, still to no avail.
The thing that bothers me is that other sgh-1747M users claim to have been getting LTE on the AOKP jellybean rom.
My question is WHY AM I HAVING TROUBLE!!!??? I know the Rom was made for an At&T sgh1747, so people may say thats why its not working, but people with Canadian SG3's have been able to get LTE on the same ROM im having trouble getting it on.
If theres anything at all im missing, can someone please clarify exactly what im missing and what I should do to get it working.
I love the AOKP jellybean ROM, i keep going back to it, but the LTE not working just hurts my feelings (since I am paying for an LTE smartphone plan). PLEASE SOMEONE HELP!!!
PS: the first time I ever changed from WCDMA to LTE/GSM autom i got a 4G symbol for about 30 secs.....never seen it again! HELP!
i dont have a gerrit. so im unsure what you are talking about.
you need to add a canadian LTE apn and then do this...
Enter *#*#4636#*#* into the dialer
phone information
set preferred network type
change to LTE/GSM auto
task650 said:
i dont have a gerrit. so im unsure what you are talking about.
you need to add a canadian LTE apn and then do this...
Enter *#*#4636#*#* into the dialer
phone information
set preferred network type
change to LTE/GSM auto
Click to expand...
Click to collapse
sorry not gerrit. you stated the info above in one of your earlier updates, which I did. Didnt seem to work for me though. Are there any suggestions as to how I can possibly fix the problem?
KCtheGREAT said:
sorry not gerrit. you stated the info above in one of your earlier updates, which I did. Didnt seem to work for me though. Are there any suggestions as to how I can possibly fix the problem?
Click to expand...
Click to collapse
I'm not really sure. Being as I don't have a Canadian model its not something I can test. But I'm sure some Canadian users will be posting here to help you out soon.
when i try to change the preferred network it will not let me change it to anything else but to lte/gsm (prl) (i have the AT&T version)
task650 said:
I'm not really sure. Being as I don't have a Canadian model its not something I can test. But I'm sure some Canadian users will be posting here to help you out soon.
Click to expand...
Click to collapse
Yea, I know, thats what Im aiming for. I wouldnt ask you directly since I know its not something you directly deal with, but thanks alot for being the first to reply!
And keep up the great work Task!
dirtbikerr450 said:
when i try to change the preferred network it will not let me change it to anything else but to lte/gsm (prl) (i have the AT&T version)
Click to expand...
Click to collapse
Thats interesting. Maybe its because you are actually using at&t network. It works when I put it on LTE/GSM, but all I get is 3G and H+
Check your IMEI in about phone/status. If its showing 0, there's a thread for that.
If you're getting 4G icon and your mobile network status says LTE and are getting LTE speeds, then its cosmetic issue. I had that problem before.
What I did was I flashed Kyan's ROM 1.3 cause its based off of Rogers firmware. Once I verified I had LTE icon on Kyan ROM, then flashed the stock/rooted ROM after.
Sent from my SGH-I747M using xda app-developers app
cue_32 said:
Check your IMEI in about phone/status. If its showing 0, there's a thread for that.
If you're getting 4G icon and your mobile network status says LTE and are getting LTE speeds, then its cosmetic issue. I had that problem before.
What I did was I flashed Kyan's ROM 1.3 cause its based off of Rogers firmware. Once I verified I had LTE icon on Kyan ROM, then flashed the stock/rooted ROM after.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Interesting. I will try that method and see what happens. Thanks for the info; will post back with results soon
Ok, so after going through the whole process stated above, i WAS able to get a 4G symbol come every now and then. But before the connection actually finalizes and goes through (before it turns blue on the aokp rom), it disconnects and goes back to WCDMA preferred. I added the rogers LTE apn, and using that apn with the LTE/GSM auto selected allowed the 4G to come, but it keeps disconnecting. It even sometimes changes back to other apns on the list by itself
Anyone know if theres a way to lock the preferred network and apn settings?
enter apn settings, then REBOOT phone. After that, enter *#*#4636#*#* into phone dialer and go change to LTE/CMDA/GSM. that worked for me, I just needed to reboot my phone for the apn settings to work
JayDieu said:
enter apn settings, then REBOOT phone. After that, enter *#*#4636#*#* into phone dialer and go change to LTE/CMDA/GSM. that worked for me, I just needed to reboot my phone for the apn settings to work
Click to expand...
Click to collapse
didnt work for me, unfortunately. im just cursed
KCtheGREAT said:
didnt work for me, unfortunately. im just cursed
Click to expand...
Click to collapse
I stumbled upon this thread and the above solution using the dialer code. Worked instantly, no reboot required. I'm running R4INS AOKP Jelly Bean port on a Rogers SGH-I727.
veebomb said:
I stumbled upon this thread and the above solution using the dialer code. Worked instantly, no reboot required. I'm running R4INS AOKP Jelly Bean port on a Rogers SGH-I727.
Click to expand...
Click to collapse
Mine works until I reboot. Then it changes back to WCDMA. I'm on Telus.
LTE on canadian i747M (Rogers)
I had similar issue with LTE after flashing to AOKP rom. The fix provided by AOKP (after every reboot, type in *#*#4636#*#* and flipping the network type from WCDMA to LTE_only, then flip to LTE/GSM auto(PRL) ) works. LTE will show up as 4G. I have the 2012-09-30 AOKP build installed.
Yesterday all of a sudden I could not get LTE anymore. Not sure what happened as the only thing I did was to activate a new account on Google. Anyway the 4G/ flipping did not work anymore. Reflashed the rom several times, still the same issue, my phone will not get LTE/4G.
This morning tried the following and voila it worked, thought I will share this:
Flip the network type to LTE Only, there is no connection, REBOOT the phone.
1. After reboot, flip the network type to LTE Only again, this time, the connection worked - what a surprise/thrill.
2. Flipped the network type to LTE/GSM auto (PRL), connection was ok and 4G came on and stayed on. Did several reboots and repeated 1 and 2 and LTE/4G was ok.
Hope this helps.
I don't recommend you to use task aokp rom! You won't get LTE real speed and Dev won't help you since you are not an at&t user! He couldn't care less about the rest so try liquid jelly bean which is a lot faster and better or milestone 4 and aristodemo! They have better support although they are tw rom but worthy anyways
Rogers I747M
Sent from my SGH-I747 using xda premium
Task compiles that ROM based on AOKP source, but AOKP officially doesn't support att. Although I didn't have problems getting lte on his ROM the fact that you have to set it every time you reboot is why I am using cm10 for now otherwise it's a good ROM!
I'm having the same issues on my rogers branded s3. No matter what I do I can get lte to even appear. My apn auto rolls back to the provided apn and if I delete that I have no data at all. Hopefully this does have an answer because the Rom is amazing
Sent from my SGH-I747M using Tapatalk 2
Alright I think I have it figured out. I added the rogers APN related all others and the only change I made was I removed the info under APN type where it said internet+MMS and left it blank. Saved the APN rebooted and I have lte now. I even rebooted my phone and each time it boots up its showing 4g without having to play with any settings
Sent from my SGH-I747 using Tapatalk 2
Hi
I have a ATT Note 2 with a t-mobile sim in it with ATT rom/modem/etc. The HSPA worked for like 2 minutes and never worked again. 2g works fine.
Has anyone gotten 3g/3g+ working one ATT note 2 on the tmobile network?
I know note works but couldnt find an answer for Note 2.
Please advice!
Thanks
^^^^^^ 2nd this.
ready to acquire GN2 ATT from local CL. but since i use t-mo cheap 5gb data plan, i am not sure how to benefit the plan. just a thought, you said HSPA worked for 2 mins (or so..) ? did you do any browsing/data usage and get result ? or just monitor the signal bar switching from H+ to E ?
mailistman said:
^^^^^^ 2nd this.
ready to acquire GN2 ATT from local CL. but since i use t-mo cheap 5gb data plan, i am not sure how to benefit the plan. just a thought, you said HSPA worked for 2 mins (or so..) ? did you do any browsing/data usage and get result ? or just monitor the signal bar switching from H+ to E ?
Click to expand...
Click to collapse
I did a speed test and got 5mbps download. I also have the 5gb plan. There must be a way to get it to work!
Check and make sure your apns are correct.
Sent from my HTC One X+ using xda premium
hyelton said:
Check and make sure your apns are correct.
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
as far as I can tell APN is all correct
vish said:
as far as I can tell APN is all correct
Click to expand...
Click to collapse
Anyone?? thx!!
Just a shot in the dark but have u deleted the apn and then created a brand new one?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
jyazzie110 said:
Just a shot in the dark but have u deleted the apn and then created a brand new one?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I have tried different roms.. so in that process yes.. this time i will delete and try again
vish said:
I have tried different roms.. so in that process yes.. this time i will delete and try again
Click to expand...
Click to collapse
Has anyone tried flashing a t-mobile modem?
Sent from my SAMSUNG-SGH-I317 using xda premium
I did - it gave me no service
Did you tried flashing a T-Mobile ROM??
yes didnt work either..
@ vish :
another shoot in the dark, do you think it has a relation with the phone being unable to toggle to 3G / UMTS mode ? will you please flash the t-mo radio back and tried :
1) With phone on, take off back cover and press your SIM card so it releases from the spring. It won't come all the way out as it's blocked by the battery. This seems fine - I didn't bother trying to force it out as I didn't want to break anything...
2) Once you see the message that the SIM card is removed, go to the dialer and dial *#2263#
3) You should see a menu with band selections. The current setting is "Automatic". If you switch to "GSM All", you will be EDGE (2G). If you switch to "WCDMA All", you will be on HSPA+ (3G, though AT&T and others call it 4G).
4) Press the SIM card back into place until it clicks. For whatever reason the phone will not recognize it until you reboot. Upon reboot you should see your new setting in effect.
source : http://forum.xda-developers.com/showthread.php?t=2046355&page=2
please report back if you do so.
I had same problem would only hold 4g a short time than go to edge and stay theere and speed tdest were horible reboot and 4g agin with great speed test and a few minits latter back to edge but not with jedi x 6.1.2 seems to be holding 4g
rexamillion59 said:
I had same problem would only hold 4g a short time than go to edge and stay theere and speed tdest were horible reboot and 4g agin with great speed test and a few minits latter back to edge but not with jedi x 6.1.2 seems to be holding 4g
Click to expand...
Click to collapse
so with jedi ROM x 6.1.2, 4g signal stays intact ? can you please do speedtest & post it here ?
btw : this 4g signal, supposed to be H+ in t-mobile ? or is it just UI issue ?
mailistman said:
so with jedi ROM x 6.1.2, 4g signal stays intact ? can you please do speedtest & post it here ?
btw : this 4g signal, supposed to be H+ in t-mobile ? or is it just UI issue ?
Click to expand...
Click to collapse
Sorry for the late reply - i tried flashing tmobile model and I got either bootloop or no service. Even with the sim card out.
Any other ideas?
Are you sure you are in a refarmed area? Cause if not you will ONLY get EDGE
^^^ what he said. T-Mobile is refarming their network to be compatible with AT&T's 3G frequencies but only in certain cities right now. Check their website, it tells what cities. They may be testing in your area. Otherwise you'll only get edge because the note 2 can't do what the note 1 did. It's an exynos thing.
Sent from my Note 2
AT&T Note 2 on T-mobile 3G/4G?
mailistman said:
@ vish :
another shoot in the dark, do you think it has a relation with the phone being unable to toggle to 3G / UMTS mode ? will you please flash the t-mo radio back and tried :
1) With phone on, take off back cover and press your SIM card so it releases from the spring. It won't come all the way out as it's blocked by the battery. This seems fine - I didn't bother trying to force it out as I didn't want to break anything...
2) Once you see the message that the SIM card is removed, go to the dialer and dial *#2263#
3) You should see a menu with band selections. The current setting is "Automatic". If you switch to "GSM All", you will be EDGE (2G). If you switch to "WCDMA All", you will be on HSPA+ (3G, though AT&T and others call it 4G).
4) Press the SIM card back into place until it clicks. For whatever reason the phone will not recognize it until you reboot. Upon reboot you should see your new setting in effect.
source : http://forum.xda-developers.com/showthread.php?t=2046355&page=2
please report back if you do so.
Click to expand...
Click to collapse
Has anyone tried this SIM card release thing to force 3G on t-mobile network on a AT&T Note 2 phone? did it work? or did I misunderstand this post to be a solution to getting 3G/4G on tmobile network?
Please help
Only edge will work. Get a t mobile device or switch to att.
I wondering if someone can help me. My Bell S3 can longer connect to 3g HSDPA or LTE I've tried about 8 different ROMs. So bizzare. Does anyone have an idea about this?
Sent from my SGH-I717 using Tapatalk 2
bhundt said:
I wondering if someone can help me. My Bell S3 can longer connect to 3g HSDPA or LTE I've tried about 8 different ROMs. So bizzare. Does anyone have an idea about this?
Click to expand...
Click to collapse
Are your APN settings correct (Settings -> Other -> Mobile networks -> Access point names)?
Do you have the right network type set (in Mobile networks as above, or by dialing *#*#4636#*#* and looking in Phone info under Set preferred network type)?
Similar problem
bhundt said:
I wondering if someone can help me. My Bell S3 can longer connect to 3g HSDPA or LTE I've tried about 8 different ROMs. So bizzare. Does anyone have an idea about this?
Sent from my SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I have a very similar problem. Actually it started like you. First I installed cm10.1. Was working great except I had intermittent 3g and no hspa. I tried different modem without result on intermittent data but I least I had 3g. But all of a sudden I started getting no network at all. Not even voice. It seems my phone can no longer find any operator except for rogers. I tried aokp, goong back to cm10, no luck. Still no network..Ow i'm going back to stock and if it doesnt work well I dont know what elae to do. Hope someone here can help.
is your imei number still intact or has it changed?
Update
ebfortin said:
I have a very similar problem. Actually it started like you. First I installed cm10.1. Was working great except I had intermittent 3g and no hspa. I tried different modem without result on intermittent data but I least I had 3g. But all of a sudden I started getting no network at all. Not even voice. It seems my phone can no longer find any operator except for rogers. I tried aokp, goong back to cm10, no luck. Still no network..Ow i'm going back to stock and if it doesnt work well I dont know what elae to do. Hope someone here can help.
Click to expand...
Click to collapse
Update: ive looked in *#*#4636#*#* facility and discovered that I cant change the band to use. When I select the menu itwm I get no options. Whereas on my girlfriend phone there are options. Maybe it can help pinpoint the problem.
24680 said:
is your imei number still intact or has it changed?
Click to expand...
Click to collapse
+10 - Make sure you have an IMEI.
My problem is identical. If the imei is gone or changed what is the solution if any?
Sent from my SGH-I717 using Tapatalk 2
bhundt said:
My problem is identical. If the imei is gone or changed what is the solution if any?
Sent from my SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
The solution is to go here: http://forum.xda-developers.com/showthread.php?t=1801997&page=22
And fix it.
I'm just wondering if anyone else has noticed this and this only happens after a period of time where the LTE will just stop working but if you switch to CDMA it's working fine?
To go a step further I've wiped the phone and restored to stock. Once that's done LTE is working fine.
To go further again, I grabbed a different ROM and the exact samething happens, I'll be able to be on LTE for about a day and then the service stops and if I switch it to CDMA I'm good.
Just wondering if anyone else here has noticed that.
Cheers,
did you verify your APN settings?
i'm using a Bell version GN2 but on Fido and i can flash all day everyday and 4g has always worked.
SeraldoBabalu said:
did you verify your APN settings?
i'm using a Bell version GN2 but on Fido and i can flash all day everyday and 4g has always worked.
Click to expand...
Click to collapse
The APN settings are always the same with Bell. They don't change.
HSPA+ will work but LTE will die after a little while. (This only occurs on other ROMS). If I stay on the stock rom there's no problem.
fluxgfx said:
The APN settings are always the same with Bell. They don't change.
HSPA+ will work but LTE will die after a little while. (This only occurs on other ROMS). If I stay on the stock rom there's no problem.
Click to expand...
Click to collapse
On a different note... I noted that if I have SAMBA Fileshare on I have strange things that happens DATA wise.... I'm still looking into it and dropping logcat and looking at different possibility.
At this point it's looking like something with the SMB Fileserver I have on the phone. (Will know later on)
fluxgfx said:
The APN settings are always the same with Bell. They don't change.
HSPA+ will work but LTE will die after a little while. (This only occurs on other ROMS). If I stay on the stock rom there's no problem.
Click to expand...
Click to collapse
im not saying the bell apn has changed but ive found that sometimes when flashing roms, the apn settings arent included in the rom and have to manually be entered.
This happened alot when using my galaxy s2 lte.
Sent from my Samsung Galaxy Note II