I got a new HTC One M8 today and I might have messed it up. It is currently stuck on the splash screen "HTC powered by Android" on bootup but I can hit power+volumeDown+voluemUp to get it to reboot and use power+volumeDown to go into hboot.
Current Hboot status:
*** UNLOCKED ***
M8_WLV PVT SHIP S-OFF
CID-VZW__001
HBOOT-3.1.0.0000
RADIO-0.89.20.0321
OpenDSP-v38.2.2-00542-M8974.0311
OS-
eMMC-boot 2048MB
APR 1 2013,00:26:53.0
What I've done:
1) Used the WeakSauce method to unlock bootloader / S-OFF
firewater-soff <dot> com
Boots OK
2) Flashed TWRP recovery v2.7.0.2
Boots OK
3) Flashed SuperSu
Boots OK
No root
4) Tried combination of flashing latest SuperSu v1.99r3, older SuperSu, sideloading vs. installing, and clearing cache
Boot Stuck!!
The logcat I did only had the single message:
"- exec '/system/bin/sh' failed: No such file or directory (2) -"
So...I might have erased the /system partition or something else horrendous. Would flashing a ROM fix this? I could just install CyanogenMod...
Any help would be appreciated!
EDIT: I see that blank "OS-" in the hboot menu...that's not good.
ADB push or adb sideload a custom ROM that works on Verizon edition
Related
Hi,
I have a G2 that keeps reboot after displaying the G2 screen.
Thing i tried:
1. download and put the PC10IMG.zip on the root SD card and boot to recovery but it wouldn't asked me to update.
2. Put the update.zip on root sd card and go to recovery tried to update with update.zip but get error .... not found ...
3. boot into recovery plug the usb in and run adb devices but it wouldn't list the devices name ( i guess debug mode isn't turn on.)
Here is the phone info
PVT Ship S-ON
HBOOT-0.82.0000
MICROP-0425
RADIO-26.03.02.26_M
eMMC-boot
Sep 2 2010,17:59:28
I don't know what to do next to fix the phone please help
In recovery what's the whole error
Mine did that too,
My error was something can't open. Somthing /mmcblk0 error
No update
Post the whole error
And for pcimg.zip you gotta boot into hboot not recovery, I assume you did that but mistakenly put "recovery"
Yes I meant Hboot, in order for it to work the phone need to be S-OFF first ?
and here is the error when i tried to flash update.zip in recovery menu:
E:Can'tmount /dev/block/mmcblk1p1 (or /dev/block/mmcblk1)
(No such file or directory)
E:Reading package...retry (up to 10x)
Here is my phone detail:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.03.02.26_M
eMMC-boot
Here is what I did:
Root with AAHK after that it reboot and stuck at white HTC screen
I boot the phone into booloader and make a factory reset, but it still stuck
I format my sdcard by a Nokia N8
Retried the first 2 steps, but still the same
Here is what I tried to do
I boot the phone into bootloader and go into fastboot, then run the correct RUU version (I see the same software version). However, it said customer error id #131. I use the this file RUU_Ace_HTC_WWE_1.32.405.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155891_signed
I boot the phone into bootloader and go into fastboot, and do these step below, but it said something about "signature verification fail".
1) Download recovery above and place it in your fastboot directory
2) Boot into Hboot
3) Connect your phone to your PC
4) Select fastboot
5) Open up command prompt and CD to your Fastboot directory
6) Run the command fastboot erase cache
7) After the OK run fastboot oem rebootRUU
8) You'll see a new screen with HTC logo and a progress bar. here you need to run fastboot flash zip PD98IMG.zip
9) Once it completes (should say ok,finished, or complete) run fastboot reboot bootloader
10) Go into Recovery and flash a rom
Click to expand...
Click to collapse
Any suggestion to help me unbrick? I read somewhere about customer error id and it is related to goldcard. I am trying to borrow a card reader to do that.
cruel91 said:
Here is my phone detail:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.03.02.26_M
eMMC-boot
Here is what I did:
Root with AAHK after that it reboot and stuck at white HTC screen
I boot the phone into booloader and make a factory reset, but it still stuck
I format my sdcard by a Nokia N8
Retried the first 2 steps, but still the same
Here is what I tried to do
I boot the phone into bootloader and go into fastboot, then run the correct RUU version (I see the same software version). However, it said customer error id #131. I use the this file RUU_Ace_HTC_WWE_1.32.405.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155891_signed
I boot the phone into bootloader and go into fastboot, and do these step below, but it said something about "signature verification fail".
Any suggestion to help me unbrick? I read somewhere about customer error id and it is related to goldcard. I am trying to borrow a card reader to do that.
Click to expand...
Click to collapse
AAHK would have created your goldcard for you its one of the options when running, also AAHK needs to run twice, and during said runs attend to any errors or requests it makes.
My A51_UL doesnt boot, on the booting screen it says "This build is for development purpose only....
When I try to enter recovery on the HBOOT screen it says:
** Software status: Modified **
** Unlocked **
S-ON
hboot-3.19.0.0000
radio-01-01.010_u10305041_08.01.41222_2
os-1.28.75.5
eMMc-boot 2048MB
I tried to lock the bootloader to flash stock rom: FAILURE
Tried to flash twrp recovery: When I select RECOVERY it goes on FASTBOOT
Don't know what else to do.
please advice.
S-OFF your phone and Flash an Official RUU
Hi there!
i have a little big problem with my HTC Desire 820.
Yesterday i was tried to root it. Ewerything goes right. i unlocked bootloader and flash twrp 2.8 and then i tried to flash Update_SuperSU zip package using twrp and after rebooting phone never boot. It shows HTC splashscreen and nothing happens. then i wiped phone but i made a mistake and wiped whole partitions. now twrp shows i don't have installed OS and problem isd the same.
i tried to flash RUU using Ubuntu and bootloader from here: https://forum.xda-developers.com/des...ption-t3269290
And here is the main problem: bootloader shows "device halted due to large image update fail"
I had Android 6.0.1.
(bootloader)
*** UNLOCKED **
A51_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-01.01.010_U10305041_08.01.50512
OS-3.17.401.3
eMMC-boot 2048MB OC
please help me get my phone back to life
Hi there!
I have this HTC One M8x here. It was encrypted. Now I'm trying to flash a custom ROM (lineage).
When the phone boots and insert a password, it gives me:
The password you entered is correct, but unfortunately, your data is corrupt.
Then it boots into recovery (Philz CWM).
Then I went to the bootloader so I can access fastboot.
Some information on that screen:
Software Status: Modified
***UNLOCKED***
M8_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.25.21331147A1.06G
OpenDSP-v48.2.2-00564-M8974_FO.1211
OS-
eMMC-boot 2048MB
Jan 10 2015
Then I booted TWRP using:
fastboot boot recovery.img
TWRP teamwin logo comes and it takes too long before TWRP works.
Then I try to mount manually using adb shell:
# mount /data
And it gives me:
mount: mounting /dev/block/mmcblk0p47 on /data failed: Invalid argument
Any idea how can I solve this?
Thanks in advance!
I had the same message when I had a different versions of firmware and ROM. Try checking your firmware version and flash a suitable ROM. Don't forget the factory reset steps.
med.erabti said:
Hi there!
I have this HTC One M8x here. It was encrypted. Now I'm trying to flash a custom ROM (lineage).
When the phone boots and insert a password, it gives me:
The password you entered is correct, but unfortunately, your data is corrupt.
Then it boots into recovery (Philz CWM).
Then I went to the bootloader so I can access fastboot.
Some information on that screen:
Software Status: Modified
***UNLOCKED***
M8_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.25.21331147A1.06G
OpenDSP-v48.2.2-00564-M8974_FO.1211
OS-
eMMC-boot 2048MB
Jan 10 2015
Then I booted TWRP using:
fastboot boot recovery.img
TWRP teamwin logo comes and it takes too long before TWRP works.
Then I try to mount manually using adb shell:
# mount /data
And it gives me:
mount: mounting /dev/block/mmcblk0p47 on /data failed: Invalid argument
Any idea how can I solve this?
Thanks in advance!
Click to expand...
Click to collapse
same issue i am facing from yesterday, any solution you got?