Bricked phone after rooting with AAHK? Stuck at white HTC screen - Desire HD Q&A, Help & Troubleshooting

Here is my phone detail:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.03.02.26_M
eMMC-boot
Here is what I did:
Root with AAHK after that it reboot and stuck at white HTC screen
I boot the phone into booloader and make a factory reset, but it still stuck
I format my sdcard by a Nokia N8
Retried the first 2 steps, but still the same
Here is what I tried to do
I boot the phone into bootloader and go into fastboot, then run the correct RUU version (I see the same software version). However, it said customer error id #131. I use the this file RUU_Ace_HTC_WWE_1.32.405.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155891_signed
I boot the phone into bootloader and go into fastboot, and do these step below, but it said something about "signature verification fail".
1) Download recovery above and place it in your fastboot directory
2) Boot into Hboot
3) Connect your phone to your PC
4) Select fastboot
5) Open up command prompt and CD to your Fastboot directory
6) Run the command fastboot erase cache
7) After the OK run fastboot oem rebootRUU
8) You'll see a new screen with HTC logo and a progress bar. here you need to run fastboot flash zip PD98IMG.zip
9) Once it completes (should say ok,finished, or complete) run fastboot reboot bootloader
10) Go into Recovery and flash a rom
Click to expand...
Click to collapse
Any suggestion to help me unbrick? I read somewhere about customer error id and it is related to goldcard. I am trying to borrow a card reader to do that.

cruel91 said:
Here is my phone detail:
ACE PVT SHIP S-ON RL
HBOOT-0.85.0024
MICROP-0438
RADIO-26.03.02.26_M
eMMC-boot
Here is what I did:
Root with AAHK after that it reboot and stuck at white HTC screen
I boot the phone into booloader and make a factory reset, but it still stuck
I format my sdcard by a Nokia N8
Retried the first 2 steps, but still the same
Here is what I tried to do
I boot the phone into bootloader and go into fastboot, then run the correct RUU version (I see the same software version). However, it said customer error id #131. I use the this file RUU_Ace_HTC_WWE_1.32.405.6_Radio_12.28b.60.140e_26.03.02.26_M_release_155891_signed
I boot the phone into bootloader and go into fastboot, and do these step below, but it said something about "signature verification fail".
Any suggestion to help me unbrick? I read somewhere about customer error id and it is related to goldcard. I am trying to borrow a card reader to do that.
Click to expand...
Click to collapse
AAHK would have created your goldcard for you its one of the options when running, also AAHK needs to run twice, and during said runs attend to any errors or requests it makes.

Related

[Q] G2 Bootloop Please Help

Hi,
I have a G2 that keeps reboot after displaying the G2 screen.
Thing i tried:
1. download and put the PC10IMG.zip on the root SD card and boot to recovery but it wouldn't asked me to update.
2. Put the update.zip on root sd card and go to recovery tried to update with update.zip but get error .... not found ...
3. boot into recovery plug the usb in and run adb devices but it wouldn't list the devices name ( i guess debug mode isn't turn on.)
Here is the phone info
PVT Ship S-ON
HBOOT-0.82.0000
MICROP-0425
RADIO-26.03.02.26_M
eMMC-boot
Sep 2 2010,17:59:28
I don't know what to do next to fix the phone please help
In recovery what's the whole error
Mine did that too,
My error was something can't open. Somthing /mmcblk0 error
No update
Post the whole error
And for pcimg.zip you gotta boot into hboot not recovery, I assume you did that but mistakenly put "recovery"
Yes I meant Hboot, in order for it to work the phone need to be S-OFF first ?
and here is the error when i tried to flash update.zip in recovery menu:
E:Can'tmount /dev/block/mmcblk1p1 (or /dev/block/mmcblk1)
(No such file or directory)
E:Reading package...retry (up to 10x)

[Q] S-ON, non-rooted Z won't boot or go into recovery.

Hi All.
Not my phone, but a friends:
VISION PVT SHIP S-ON
HBOOT-0.85.0013
MICROP-0425
RADIO-26.10.04.03_M
eMMC-boot
Apr 11 2011.23:36:27
If you go into recovery, the phone just vibrates a few times and turns off. If you go Factory Reset, the phone just freezes.
I've tried:
RUU with no luck (get's stuck on Rebooting into Bootloader)
tried putting the .ZIP onto the SD but got "ModelID Incorrect" (can't create a GoldCard as phone won't boot, therefor no ADB)
flashing a recovery through fastboot but got "FAILED (remote: signature verify fail)"
booting into recovery using fastboot boot (FAILED (remote: signature verify fail))
I assume all my issues have been due to S-ON.
I'm stumped - any ideas?
There have been a few folks on here with the same issue in the last few weeks. Not that the phone is terribly old, but I wonder if it can be that some hardware component (eMMC or other) is failing over time?
expza said:
Hi All.
*snip*
RUU with no luck (get's stuck on Rebooting into Bootloader)
tried putting the .ZIP onto the SD but got "ModelID Incorrect" (can't create a GoldCard as phone won't boot, therefor no ADB)
flashing a recovery through fastboot but got "FAILED (remote: signature verify fail)"
booting into recovery using fastboot boot (FAILED (remote: signature verify fail))
?
Click to expand...
Click to collapse
IIRC there is a way to create a GoldCard manually without the phone ... but i'm highly unsure :-s
The last two sounds like an error due to s-on
oelly said:
IIRC there is a way to create a GoldCard manually without the phone ... but i'm highly unsure :-s
The last two sounds like an error due to s-on
Click to expand...
Click to collapse
I was able to create a working GoldCard using my phone, it no longer gives Model-ID Incorrect. HOWEVER, new problem. It's now moaning about Main Version being older, update failed.
I see android-info.txt in the ZIP is:
modelid: PC1010000
cidnum: T-MOB010
mainver: 2.15.531.3
hbootpreupdate:12
However, this phones info is:
VISION PVT SHIP S-ON
HBOOT-0.85.0013
MICROP-0425
RADIO-26.10.04.03_M
eMMC-boot
Apr 11 2011.23:36:27
I assume it's the Radio Version number that is not matching up - however, the one RUU's in Shipped-Roms with that Radio Number are EXE's and not ZIPs.
Does anyone know how I can get a ZIP RUU that would work with this phones current versions?
edit: p.s. ZIP I'm currently using is PC10IMG_Vision_TMOUS_2.15.531.3_Radio_12.52.60.25U_26.08.04.30_M3.zip (renamed when on SDcard to PC10IMG.zip)
double edit: Have found a way to extract zip from EXE. Loaded it to Gold Card and update is currently flashing via HBOOT. Still on Bootloader. Assume this takes a while (10 - 15 minutes), so I'll be patient.
combo edit: should state the the RUU ZIP I extracted was RUU_Vision_Gingerbread_S_HTC_WWE_2.42.405.2_Radio_12.56.60.25_26.10.04.03_M_release_199043_signed.exe
Phone honors the PC10IMG.zip, but gets stuck on BOOTLOADER - Updating.
Any suggestions? Is it safe to delete items out of the RUU .zip? Want to try flash recovery.img only.
edit: looks the the rom.zip I extract is always corrupt (when trying to edit it using WinRAR or something)
You can't edit the zips, they are signed, so anything you do to them will cause them to not flash.
Winrar might be complaining because of the signing.
-Nipqer
Given up on trying to flash the RUU via HBOOT - it just freezes on "Bootloader - Updating" - pulling battery causes no issues so I assume it doesn't even attempt to flash anything.
Next step, using HTCDev to unlock the bootloader? Safe? I worry that the Bootloader not flashing via RUU means that HTCDev Bootloader Unlock won't work, or could possibly break it.
same problem
hi mate, im having the exact same problem as you...did you manage to fix it?
i have found the same ruu for my radio version but it gets stuck on the bootloader as the bar moves but the fone stays on the same screen.
do u think i need to make that goldchip card? how do i make one please?
i had that same problem just 2 days ago so in order to get the ruu to flash right it has to be a radio thats higher than the one you already have ... but if that dosnt work you will have to change it manualy using adb in recovery mode so wat you do is power offf the phone comptley and plug it in your computer via usb then open up adb and type adb devices the phone has to be off and it should show your device id then the word recvery next to it then your gunna wanna pull the misc.img from the phone and edit it with a hex editor i did this method to downgrade my g2 kus my sdcard dosnt read but after you change the misc the ruu shuld flash fine 1.power off phone Connect phone to computer,
2.Open adb cmd and type : adb shell
3.Type su
4. if you get # symbol continue
5.Type : dd if=/dev/block/mmcblk0p24 of=/sdcard/misc.img (YOU CAN COPY THE IMG TO EITHER sdcard, which is internal memory, or sdcard2, which is removal card)
6. Switch to USB mode
7.copy misc.img from the root of the sdcard to your computer
8.Open misc.img with HeX Editor XVI32
9.Find the version and change it. it will be the first area in the the upper right in the screen of the app
10.change the number in whatever you want. (has to be in the form of.. 1.00.000.0
11.Save it and upload it to the root of the sdcard with miscnew.img name
12. Switch to charge mode
13.Type adb shell, su dd if=/sdcard/misc.img of=/dev/block/mmcblk0p24
14.Reboot to fastboot then fastboot reboot to RUU then fastboot flash PC10IMG.zip and it shuld flash fine
---------- Post added at 11:42 PM ---------- Previous post was at 11:37 PM ----------
or yu can try this http://forum.xda-developers.com/showthread.php?t=1526316 and should work its alot easier than the adb method
Never managed to fix this (tried the exact same thing ari3z suggested, but ages ago) - just kept freezing when trying to write anything to flash.
Phone was eventually swapped out in warranty.

[Q] Trouble restoring DINC2

Hi all,
So I am stuck with my Incredible 2 at a white HTC screen on boot.
This is my current status
*****UNLOCKED*******
VIVO_W XB SHIP S-ON RL
HBOOT-0.98.0000
Radio-1.09.01.0312
eMMC-boot
Jul 18 2011, 12:39:36
I have tried flashing the signed RUUs that I found in another post, but I either get invalid or it sticks at verifying. I don't know where to proceed from here - I can't recognize the device in CMD either (adb devices results in no devices found). What step should I take next? Am I bricked?
I would appreciate any help, I'm getting really disheartened by all of this I have dug through every post like mine to no avail.
After you HTCDev Unlocked, did you flash a recovery and a ROM? What are you trying to do?
Since you're still S-ON, when you flash a ROM you also need to extract the boot.img from the ROM zip and flash that in fastboot using "fastboot flash boot boot.img". That could be why you're stuck at the white screen, there is no boot image.
If you're trying to flash a ROM, flash a custom recovery "fastboot flash recovery" and then the name of your recovery file, like "recovery-CWM-5.0.2.0.im" or whatever. Then flash the ROM in recovery. Then reboot to hboot and flash the boot.img.
Adb will only work if you're in recovery or the phone is booted. If you're in hboot you need to use fastboot commands.
If you really want to flash a RUU, you need to get into fastboot and give the command "fastboot oem lock", which of course relocks the device.

[Q] Reverting to stock ROM

Hi.
I need your help with my DHD.
Few months ago I flashed my DHD for the first time with JellyTime R11. I have some problems with it (GPS not working, random crashes/freezes), so I want to get back to stock rom.
Here is the problem. Every stock ROM (like this one: http://forum.xda-developers.com/showthread.php?t=1382235) I try to flash (through Clockwork Recovery, of course doing full wipe first) does not work. They just makes my phone stuck at black screen, just after HTC logo.
I even tried using few RUU for my phone, but they always returns error 140, or error 155.
I also tried using AAHK and AAHK2, but those don’t want to work with my sdcard (error: sdcard not mounted, but it clearly is mounted).
Could someone point me to what I should do next?
CID: HTC_032
Bootloader info:
*** UNLOCKED ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
Flashing rom 101: for s-on bootloader, u need to flash the boot.img contained in the rom zip files using fastboot. Just extract the boot.img, put it into adb/fastboot folder, reboot device to fastboot, open cmd/terminal, type fastboot flash boot boot.img. Done.
Sent from my Desire HD using xda premium
That’s what I was missing. Works great.
Thank you.

[Q] Desire Z dead/briked?

Need Help!
First of all sorry for my English.
I have a Desire Z not working, stops at the boot with white logo and htc green.
One mainboard has been changed when in warranty, now... after one year same problem.
I tried many ways but no solutions.
Situation:
Phone is original:
VISION PVT SHIP S-ON
HBOOT-0.85.0013
MICROP-0425
Radio_26.10.04.03_M
eMMC-boot
apr 11 2011.23:36:27
Gingerbread 2.42.405.3
I can go in fastboot and find the device
I can go ion adb but no device is found (drivers in resources pc are ok, phone recognized)
If I run an RUU.exe phone stops in "avvio su bootloader.........." (starting on bootloader) phone freeze...
Flash some files from fastboot not working....someone tell that I have to be S-off..(true?)
Factory reset: the phone freeze, stops working.
Recovery: the phone reboot and go in black logo with an image phone with reciclyng icon then 7 vobrations and phone turn off.
I try to change to S-OFF by unlocking bootloader vith htcdev procedure but when I try to get the token on fastboot I get the error: (bootloader) [ERR] Command error !!!
Put the phone in the refrigerator for some time....not working
Someone tell that the eMMC can be dead/corrupted....
First to buy a new phone, anyone has other solutions to try to recover the phone to the
Did I do something wrong?
Thanks in advance for your help!!!
Fish_htc said:
Need Help!
First of all sorry for my English.
I have a Desire Z not working, stops at the boot with white logo and htc green.
One mainboard has been changed when in warranty, now... after one year same problem.
I tried many ways but no solutions.
Situation:
Phone is original:
VISION PVT SHIP S-ON
HBOOT-0.85.0013
MICROP-0425
Radio_26.10.04.03_M
eMMC-boot
apr 11 2011.23:36:27
Gingerbread 2.42.405.3
I can go in fastboot and find the device
I can go ion adb but no device is found (drivers in resources pc are ok, phone recognized)
If I run an RUU.exe phone stops in "avvio su bootloader.........." (starting on bootloader) phone freeze...
Flash some files from fastboot not working....someone tell that I have to be S-off..(true?)
Factory reset: the phone freeze, stops working.
Recovery: the phone reboot and go in black logo with an image phone with reciclyng icon then 7 vobrations and phone turn off.
I try to change to S-OFF by unlocking bootloader vith htcdev procedure but when I try to get the token on fastboot I get the error: (bootloader) [ERR] Command error !!!
Put the phone in the refrigerator for some time....not working
Someone tell that the eMMC can be dead/corrupted....
First to buy a new phone, anyone has other solutions to try to recover the phone to the
Did I do something wrong?
Thanks in advance for your help!!!
Click to expand...
Click to collapse
Im not 100% sure if this will work for you, but this is how i unbricked my DZ.
I can see you already have fastboot running in your pc, good.
Boot into bootloader and go into fastboot there.
Then in cmd use fastboot oem rebootRUU
when your phone is in RUU, type:
fastboot -w
fastboot flash zip PC10IMG.zip it will propably give some error message and says to flush image immediately, so type fastboot flash zip PC10IMG.zip again.
fastboot reboot-bootloader
Now you should have engineering hboot running.
PC10IMG.zip file mentioned can be downloaded here : http://files.virtuousrom.com/vision/misc/PC10IMG.zip

Categories

Resources